BMW Gaskets, Gasket Sets, Seals, & O-Rings

Oil Filter Housing Gasket KIT

T#:637846

Part#: 1142753729312KT1

In Stock

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.

Show More Show Less

Complete Valve Cover Gasket Replacement Kit - M52/S52

T#:30164593

Part#: 11120034108KT3

In Stock

Sale - Save 8% $ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.36 USD

Add to Wish List

Qty

Sale - Save 8%

$ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.36 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Valve Cover Spark Plug Tube Gaskets 15 Rubber Grommets/Sealing Washers Ultra-Black RTV Gasket Maker Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

OEM Rear Main/Crankshaft Seal Kit E28, E30, E34, E36, E39, Z4 ...

T#:42099850

Part#: 11142247867TKT

In Stock

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Protect your BMW engine and drivetrain with the OE Rear Main/Crankshaft Seal Kit, a critical upgrade for leak-free performance and longevity.

Oil Filter Housing Gasket Kit

T#:5403248

Part#: 11427537293TMSKT

In Stock

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

Includes gaskets and hardware to replace both oil filter housing gaskets. Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.

Show More Show Less

N52 Oil Filter Housing Gasket Kit - Includes Oil Pressure Sensor ...

T#:15677580

Part#: 11427540759-KT

In Stock

Sale - Save 1% $ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.73 USD

Add to Wish List

Qty

Sale - Save 1%

$ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.73 USD

Add to Wish List

This kit includes: 1 Oil Filter Housing Gasket (11428637821) 1 M8x28 bolt (11427540759) 1 M8x43 bolt (11427540763) 1 M8x78 bolt (11427540758) 1 Oil Pressure Sensor (12617568480)

M57 Diesel Valve Cover Gasket Replacement Kit - BMW E70 E90 M57 3.0L ...

T#:20946753

Part#: 11122247447TMSKT

In Stock

Sale - Save 2% $ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 147.60 USD

Add to Wish List

Qty

Sale - Save 2%

$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 147.60 USD

Add to Wish List

Eliminate your valve cover oil leaks! This M57 Valve Cover Gasket Replacement Kit includes all of the basic gaskets and seals necessary to replace your valve cover gasket and prevent further oil leaks. Included: Valve Cover Gaskets & Hardware Fuel Injector O-Rings (x6) Fuel Injector Gaskets (x6) Turbo Oil Line Seals (x6)

Show More Show Less

Valve Cover Gasket Overhaul Kit - E9X 328i, E60 528i, E83 X3 3.0i/si,...

T#:180875

Part#: TMS180875

In Stock

$ 142.24

This product was last offered at the strikethrough price on
05-07-2026

$ 107.33 USD

Add to Wish List

Qty

$ 107.33 USD

Add to Wish List

Not only will this kit stop most E90 oil leaks, it's the perfect addition for ignition coil or spark plug replacement! Oil leaks - and the damage they can cause - seem to be the worst annoyances on these cars. The biggest source of an oil leak is from the valve cover, followed by the oil filter housing, Valvetronic seal, camshaft seals, and the eccentric shaft sensor seal. Once the oil leaks, and if ignored for an extended time, the oil will contaminate vital electrical sensors. This is especially the case with ignition coils and also the eccentric shaft sensor on the Valvetronic shaft at the top of the cylinder head. During any ignition coil and spark plug replacement take a close look inside for any oil pooling at the bottom. We have been seeing valve cover oil leaks as soon as 40,000 miles. We look for oil leaks on every E90 that comes into our shop.

We have put together this package of valve cover gaskets and other related gaskets and seals for you to fully overhaul the N52 valve cover and put a stop to those pesky oil leaks. This package has the replacement parts for N52 engines built from the 2007 model year and includes:

11127582245 - N52 valve cover gasket set
11127552280 - N52 eccentric shaft sensor seal
11127559699 - N52 Valvetronic gasket

2007 and later N51/N52 engines do not need replacement valve cover bolts, unless the bolts are actually broken off or missing. Unlike the 2006 aluminum hardware, the later parts are steel and not 1-time use.

These are all OEM or OE parts. Replacement of these gaskets and seals is straight-forward but a long process. BMW dealers typically charge for over eight hours of labor. If you have replaced spark plugs before you should be capable of this repair. In addition, there are several other parts to replace while you're in the vicinity: camshaft sensor o-rings, oil filter housing profile gasket, VAN0S solenoids, and the eccentric shaft sensor. These other parts, except the eccentric shaft sensor (see below), are replaceable without removing the valve cover but are more easily accessed during the valve cover work.

Eccentric Shaft Sensor: This is the position sensor that relays the eccentric shaft's position back to the DME. It's located at the front of the engine and is only accessible with the valve cover off . The seal around the sensor can fail and allow oil to blow out from under the cam cover. Oil can then leak into the sensor itself and cause it to fail. Without a functioning sensor your E90 can experience poor running, hesitation, poor performance, jerky shifts, and sluggish response. It's easy to check and see if oil has accumulated inside the sensor: unbolt the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside or even around the sensor itself, plan on replacing this sensor during your next ignition coil, spark plug, and/or valve cover gasket work.

This valve cover kit fits the following BMWs:
2008-2012 E82 BMW 128i
2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E60 BMW 528i 528xi 528i xDrive
2011 F10 BMW 528i
2007-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si
10/2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i

Show More Show Less

BMW N52 Valve Cover & PCV Valve Refresh Kit

T#:21735875

Part#: VALVECVRN52KT

Ships in 2 Business Days

Sale - Save 11% $ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 414.91 USD

Add to Wish List

Qty

Sale - Save 11%

$ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 414.91 USD

Add to Wish List

Maintaining the peak performance and reliability of your BMW N52 engine is essential for a smooth and enjoyable driving experience. One of the most effective ways to achieve this is by replacing critical components like the valve cover, crankcase vent hose, angle connector with heating element, and cylinder sleeve. In this article, we'll delve into the numerous benefits of upgrading these vital parts, ensuring your BMW N52 operates at its best. Optimized Engine Performance: Replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve enhances your BMW N52's engine performance. The valve cover plays a crucial role in sealing the engine, preventing oil leaks and ensuring optimal valve operation. When you upgrade these components, you reduce the risk of performance-robbing oil leaks and maintain precise valve timing, resulting in improved horsepower and torque. Enhanced Reliability: Reliability is paramount for any BMW owner. These components, when aged or damaged, can lead to severe engine issues. By replacing them, you significantly reduce the likelihood of unexpected breakdowns or costly repairs, ensuring your BMW N52 engine runs smoothly and reliably for years to come. Improved Fuel Efficiency: An efficiently operating engine not only performs better but also consumes less fuel. The replacement of these components leads to better combustion, reduced emissions, and ultimately improved fuel efficiency. This means fewer trips to the gas station and a lighter environmental footprint. Reduced Maintenance Costs: Regular maintenance and repairs can add up over time. By proactively replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve, you mitigate the risk of more extensive engine damage that could lead to expensive repairs down the road. In the long term, this can translate into significant cost savings. Extended Engine Lifespan: The longevity of your BMW N52 engine is directly tied to the quality and condition of its components. When you invest in high-quality replacements, you're effectively extending the lifespan of your engine. This not only preserves the value of your BMW but also allows you to enjoy its performance for years to come. Precise Temperature Control: The angle connector with heating element is vital for maintaining optimal engine temperature, especially in cold weather. A malfunctioning or worn-out connector can disrupt temperature control, affecting engine performance. Replacing this component ensures consistent and precise temperature management. Customized Upgrades: When replacing these components, you have the opportunity to choose high-performance or specialized alternatives, allowing you to customize your BMW N52 to your preferences. Whether you prioritize power, efficiency, or specific driving conditions, there are options available to tailor your engine's performance accordingly. Included in the BMW N52 Valve Cover & PCV Valve Refresh Kit: 6 Cylinder Sleeves 1 Alternator Mounting Screw Set 1 Angle Connector with Heating Element 1 Valve Cover - Gasket Included 1 Crankcase Vent Hose

Show More Show Less

Oil Pan Gasket Replacement Kit

T#:5403285

Part#: 11137548031TMSKT

In Stock

$ 201.03 USD

Add to Wish List

Qty

$ 201.03 USD

Add to Wish List

Includes new pan gasket, hardware and a oil service kit. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

S54 Constant Pressure Valve Replacement Kit

T#:401625

Part#: 11111318185KT

In Stock

Sale - Save 2% $ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD

Add to Wish List

Qty

Sale - Save 2%

$ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD

Add to Wish List

When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem.

The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking.

Show More Show Less

Valve Cover Gasket Set

T#:15744013

Part#: 11127831271-KT

In Stock

Sale - Save 5% $ 108.87

This product was last offered at the strikethrough price on
07-28-2026

$ 103.01 USD

Add to Wish List

Qty

Sale - Save 5%

$ 108.87

This product was last offered at the strikethrough price on
07-28-2026

$ 103.01 USD

Add to Wish List

When these gaskets leak you'll start to smell oil burning when the engine is hot. Also everything downward from the top of the engine becomes coated in a greasy film. The valve cover gasket keeps all of the motor oil inside your engine. Your valve train and lifters get soaked with oil to keep everything lubricated. If the valve cover fails, engine oil seeps and leaks out, running down and burning on the block or cylinder head. Replace it and keep your engine compartment clean and tidy with all the engine oil in the motor. If you are removing your S54 valve cover for valve adjustment, inspection or repairs, you can now get all the gaskets you need in one box. Included are Valve cover gasket Spark plug seals Nut seals Grommets Copper sealing washers

Show More Show Less

Comprehensive Valve Cover Gasket Kit - B58 Gen2

T#:30197950

Part#: 11129894803KT2

Ships in 2 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Gasket Set Profile Gasket (HPFP) 2x O-ring (Camshaft Position Sensor) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Valve Cover Gasket Set - E36 E39 Z3 with M52

T#:337951

Part#: 11120034108

In Stock

Starting at $ 70.25 USD

Add to Wish List

Starting at $ 70.25 USD

Add to Wish List

Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits M52 engine with single VAN0S. This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others.

Alternate BMW part numbers:
11129070532

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW M Roadster M Coupe

Show More Show Less

Valve Cover Gasket Set - E39 M5, E52 Z8

T#:214354

Part#: TMS214354

Ships in 1-2 days

$ 265.32

This product was last offered at the strikethrough price on
03-02-2026

$ 264.92 USD

Add to Wish List

Qty

$ 264.92 USD

Add to Wish List

Replacement valve cover gaskets, including large cover gaskets and seals and grommets. Fits E39 M5 and E52 Z8 with S62 engine.

Kit includes:
11120001269 - Valve Cover Gasket Cyl 1-4
11120001278 - Valve Cover Gasket Cyl 5-8
11121721879 - Valve Cover Seals x 6
11121437395 - Valve Cover Seal Grommet x 20

This item fits the following BMWs:
2000-2003 E39 BMW M5
2000-2003 E52 BMW Z8 Roadster

Show More Show Less

Cometic Multi-layer Steel Head Gasket - B58

T#:25241786

Part#: COM-HG-B58G1

In Stock

$ 244.99

This product was last offered at the strikethrough price on
05-06-2026

$ 226.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 244.99

This product was last offered at the strikethrough price on
05-06-2026

$ 226.99 USD

Limited Qty Sale

Add to Wish List

Constructed with multiple layers of stainless steel and a proprietary coating, the MLX gasket offers superior sealing and load distribution capabilities. The coating is designed to withstand high temperatures and pressures, preventing gasket failure due to fatigue or stress. Additionally, the unique embossed sealing bead provides further sealing ability.

Show More Show Less

Comprehensive Valve Cover Gasket Kit - BMW M62

T#:30164592

Part#: M6211_2253KT

In Stock

$ 138.30

This product was last offered at the strikethrough price on
06-23-2026

$ 137.70 USD

Add to Wish List

Qty

$ 137.70 USD

Add to Wish List

This complete kit provides all the gaskets you need for a thorough valve cover service.

Is your BMW M60 or M62 V8 engine leaking oil? You’re not alone. Oil leaks are a common issue, but we’ve got the perfect solution to keep your engine running clean and efficient.

The valve cover gasket is essential for keeping engine oil where it belongs – inside the engine. It ensures that your valve train and lifters are properly lubricated, preventing wear and tear. When this gasket fails, oil leaks out, creating a mess and potentially causing damage as it burns on hot engine components. Keep your engine compartment spotless and your BMW performing at its best with our valve cover gasket kit.

Show More Show Less

Comprehensive Valve Cover Gasket Kit - N63/S63

T#:30164665

Part#: 11128648131KT2

Ships in 3 Business Days

$ 157.99

This product was last offered at the strikethrough price on
08-11-2026

$ 156.99 USD

Add to Wish List

Qty

$ 156.99 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Gasket Set - Left & Right High Pressure Fuel Pump Gasket (2) O-Ring Seals (6) Torx Screws (6) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

WPC Performance Rod Bearing Replacement - Early S54

T#:22196335

Part#: E46Z3RDBRGKT

Back Ordered

Sale - Save 3% $ 855.99

This product was last offered at the strikethrough price on
05-03-2026

$ 827.85 USD

Add to Wish List

Qty

Sale - Save 3%

$ 855.99

This product was last offered at the strikethrough price on
05-03-2026

$ 827.85 USD

Add to Wish List

If you're the proud owner of an S54-equipped BMW, chances are you're passionate about enhancing your vehicle's performance and longevity. One crucial upgrade that can significantly improve your driving experience is Turner Motorsport's WPC Rod Bearing Replacement Kit, coupled with ARP Rod Bolts for increased durability.

Enhanced Durability: The WPC Performance Rod Bearing Replacement Kit is designed with superior materials and manufacturing processes. WPC treatment reinforces the surface of the bearings, making them highly resistant to wear, which is essential for high-revving engines like the S54. This durability ensures your engine will stand the test of time, even under strenuous driving conditions. Improved Performance: By reducing friction and wear, WPC-treated rod bearings allow for smoother and more efficient engine operation. This increases power and responsiveness, providing a more exhilarating driving experience. Whether tearing up the track or enjoying a spirited weekend drive, you'll notice a difference in your vehicle's performance. Precision Engineering: Crafted from premium quality materials, these bolts and bearings offer exceptional tensile strength and structural integrity. This guarantees that your connecting rods will stay securely in place, even during high-stress situations. Your engine's components will work in perfect harmony, minimizing the risk of catastrophic engine failure. Preventative Maintenance: The S54 is notorious for rod bearing failure, often necessitating complete short block replacement. Choosing to proactively replace your rod bearings with our WPC offering ensures smooth operation and eliminates potential engine failure. Included in the kit:

12 - Turner Motorsport "Race Series" WPC-Treated Bearing Shells 4 - Self-Locking Collar Nut - Priced Each 1 - Oil Pan Gasket - Elring 1 - Oil Pan Center Cover Gasket 1 - Oil Filter Kit 1 - Oil Drain Plug 1 - Dipstick O-ring 1 - ARP Connecting Rod Bolt Kit (M10x1.25 - for S54B32 produced after 02/2003) 6 - Castrol Edge Euro Car Engine Oil (10w-60) Quart 1 - Redline Assembly Lube - 4 oz

Show More Show Less

Complete Valve Cover Gasket Kit - BMW S65 4.0L

T#:28869570

Part#: 11127838271TKT

Ships in 7 Business Days

$ 324.99

This product was last offered at the strikethrough price on
03-04-2026

$ 321.99 USD

Add to Wish List

Qty

$ 321.99 USD

Add to Wish List

If your valve cover is leaking oil or a bad seal is causing vacuum issues and check engine lights, we recommend replacing your seals with this complete valve cover gasket kit! This kit includes all of the main gaskets and o-ring seals used by BMW to seal your valve cover to the cylinder head. Included: Victor Reinz Left & Right Valve Cover Gaskets Genuine BMW Oil Separator Seal O-rings - Two Per Valve Cover Genuine BMW Crankshaft Position Sensor O-Rings - Two Per Valve Cover URO Spark Plug Tubes w/ Gaskets If you are not replacing your valve cover, we also recommend inspecting the grommets found on the valve cover bolts. Over time these can compress or split, leading to insufficient sealing of the valve cover to the cylinder head due to a lack of pressure. BMW does not offer these grommets separately from their individual valve cover bolts, but NRW Design came in clutch with their Silicone Valve Cover Grommet Kit.

Show More Show Less

Valley Pan Gasket Kit - V8 - E31 E32 E34 E38 E39

T#:340508

Part#: TMS2820

Ships in 1-2 days

$ 268.99

This product was last offered at the strikethrough price on
04-06-2026

Starting at $ 245.73 USD

Add to Wish List

Starting at $ 245.73 USD

Add to Wish List

This kit includes all the parts you will need to repair a leaking Valley Pan Gasket on your BMW V8. This fits E31 840i 840ci E32 740i 740il E34 530i 540i E38 740i 740il E39 540i E53 X5 4.4i (M62) X5 4.6is.

This kit includes the following parts:
4 x 11611433328 - Intake Manifold Gasket
1 x 11141742042 - Valley Pan with Gasket
2 x 11531710048 - O-Ring for Water Pump
2 x 11531710055 - O-Ring for Water Pump
1 x 11141736106 - Valley Pan Plastic Cover

This item fits the following BMWs:
1993-1995 E34 BMW 530i 540i
1997-2003 E39 BMW 540i
1992-1994 E32 BMW 740i 740ili
1995-2001 E38 BMW 740i 740il
1990-1998 E31 BMW 840i 840ci

Show More Show Less

Valley Pan Gasket Kit - E53 X5 4.4i, 4.6is 2000-2003

T#:339066

Part#: TMS179741

Ships in 1-2 days

$ 268.99

This product was last offered at the strikethrough price on
04-06-2026

Starting at $ 245.73 USD

Add to Wish List

Starting at $ 245.73 USD

Add to Wish List

This kit includes all the parts you will need to repair a leaking Valley Pan Gasket on your BMW V8. Fits X5 with M62 V8 engine.

This kit includes the following parts:
4 x 11611433328 - Intake Manifold Gasket
1 x 11141742042 - Valley Pan with Gasket
2 x 11531710048 - O-Ring for Water Pump
2 x 11531710055 - O-Ring for Water Pump
1 x 11141736106 - Valley Pan Plastic Cover

This item fits the following BMWs:
2000-2006 E53 BMW X5 4.4i X5 4.6is

Show More Show Less

Oil Filter Housing Gasket Kit - N52 3.0L

T#:24212294

Part#: N52OFHGKT

In Stock

Sale - Save 3% $ 138.99

This product was last offered at the strikethrough price on
06-15-2026

$ 134.82 USD

Add to Wish List

Qty

Sale - Save 3%

$ 138.99

This product was last offered at the strikethrough price on
06-15-2026

$ 134.82 USD

Add to Wish List

A leaking gasket can cause headaches down the road, usually when you least expect it. The N52 engine can suffer a particularly troublesome leak around the oil filter housing gasket. Generally seen as something to keep an eye on, this is not something that should be put off. The upgraded Bavarian Autosport gasket is made from a DuPont Viton rubber that has a higher temperature and chemical resistance than the stock gasket material. This gasket should last the lifetime of the engine without breaking down and leaking like the Genuine BMW parts do.

Show More Show Less

Valley Pan Service Kit - Level 1

T#:15744049

Part#: 111417361060-KT

In Stock

Sale - Save 7% $ 302.99

This product was last offered at the strikethrough price on
04-03-2026

$ 280.43 USD

Add to Wish List

Qty

Sale - Save 7%

$ 302.99

This product was last offered at the strikethrough price on
04-03-2026

$ 280.43 USD

Add to Wish List

Valley pan gaskets are a common failure on the M62 motors, Symptoms can include a smell of coolant regularly or a mysterious loss of coolant with no identifiable leaks. This kit contains the basics need to be replaced when doing a valley pan gasket. Kit includes Valley pan with rubber gasket: updated valley pan alleviates the core of the issue - the design! Valley pan securing hardware Valley pan heat shield Water pipe o-rings Water cross over gaskets Water pump gasket Throttle body gasket

Show More Show Less

Valve Cover Seal, Washer & Grommet Set - for S54

T#:211239

Part#: 11127830972-395

In Stock

Sale - Save 14% $ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.74 USD

Add to Wish List

Qty

Sale - Save 14%

$ 43.99

This product was last offered at the strikethrough price on
05-03-2026

$ 37.74 USD

Add to Wish List

Valve Cover Seal Washer. Seals the valve cover bolt to the cam cover. Not required when changing valve cover gasket but good to have as spares. They often get hard and shrink over time, leading to an oil leak or vacuum leak. We sell this as a complete set of 15 grommets with both part numbers included (11127830972 and 11121437395). Individual seals available separately (see below).

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Oil Cooler Housing Gasket Kit

T#:637847

Part#: 11428637820KT1

In Stock

$ 178.99 USD

Add to Wish List

Qty

$ 178.99 USD

Add to Wish List

Valve Cover Gasket Kit - E9x M3 S65

T#:26505029

Part#: 11127838272KT2

In Stock

$ 376.99

This product was last offered at the strikethrough price on
08-07-2026

$ 365.99 USD

Add to Wish List

Qty

$ 365.99 USD

Add to Wish List

Enhance the performance and longevity of your BMW S65 engine with this all-inclusive valve cover gasket service kit!

This comprehensive kit addresses the common issue of deteriorating valve cover gaskets in the S65 engine. Over time, heat exposure and engine oil can cause these gaskets to degrade, leading to leaks that result in smoke and unpleasant odors from burning oil.

Engineered for seamless integration and hassle-free operation, this kit streamlines the valve cover gasket replacement process, saving you valuable time and money.

Kit Includes:

Genuine BMW Valve Cover Gaskets - Bank 1 (11127838271) & Bank 2 (11127838272)
8x URO Parts Plastic Spark Plug Tubes (11127835170)
26x NRW Design Silicone Valve Cover Grommet/Seal (replaces 11127841217)

Each component has been meticulously selected to ensure optimal durability and leak prevention. Whether you're a professional mechanic or a DIY enthusiast, rest assured that every part in this kit is of the highest quality and precision-engineered for peak performance.

Show More Show Less

Complete Valve Cover Gasket Replacement Kit - M50

T#:30164630

Part#: 11120034108KT5

In Stock

Sale - Save 22% $ 80.99

This product was last offered at the strikethrough price on
04-01-2026

$ 62.87 USD

Add to Wish List

Qty

Sale - Save 22%

$ 80.99

This product was last offered at the strikethrough price on
04-01-2026

$ 62.87 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Valve Cover Spark Plug Tube Gaskets 15 Rubber Grommets/Sealing Washers Ultra-Black RTV Gasket Maker Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Athena Cut Ring Head Gasket S63/N63

T#:26238393

Part#: ATH-HG-CR-S63-90

Ships in 3 Business Days

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

Athena-SCE's gasket body is composed of Motorgasket, a reinforced material developed by Athena's R&D department. This consists of a steel core covered with two layers of asbestos-free aramid fibre and offers excellent thermal and mechanical resistance without compromising its ability to adapt to mating surfaces. To ensure maximum sealing under all conditions, a silicone bead is also applied to critical sealing areas, such as oil and coolant passages. The AISI 304 stainless steel cooper rings bite into the aluminum head, providing maximum sealing around the cylinder bore and optimizing engine performance, even on engines with nitrous and/or turbo applications that exceed 2 bar boost. Please be aware that the gasket should be 0.5mm to 1mm larger than the piston. For example, if the piston measures 84mm, then the gasket should be the next size up, either 84.5mm or 85mm. Before installation, it is crucial to have the mating surfaces of the cylinder head and block professionally cleaned and resurfaced to ensure they are completely flat. Sold as a set - Includes Bank 1 and Bank 2 Gaskets Make sure that the engine block and cylinder head surfaces are clean, flat, and free from any debris, oil, or coolant. Install the Cut Ring gasket on the engine block and ensure that it is properly aligned. Avoid twisting or bending the gasket during installation. Place the cylinder head on top of the gasket and install the head bolts or studs in their correct positions. Follow the manufacturer's recommended torque specifications and tighten the bolts or studs in the proper sequence to ensure even clamping force across the gasket. After the initial tightening, re-torque the head bolts or studs after the engine has been started and then allowed to cool to room temperature. This will ensure that the gasket is properly seated and compressed. It is recommended to not use any additional sealant on the MLX gasket, as it is already coated with a Viton rubber sealant. Using additional sealant can hinder the performance of the gasket.

Show More Show Less

URO Engine Oil Pan Gasket - BMW E84 F3X F10 E89 N20 N26 2.0L ...

2X Entries For Our G87 M2 Sweepstakes!

T#:32781447

Part#: 11137618512PRMK

In Stock

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

When removing your oil pan, it is always a good idea to replace the gasket to ensure you don't experience leaks when the pan is re-installed. This gasket is designed specifically for the URO Premium Aluminum Oil Pan Improved profile and upgraded AEM material to eliminate leaks. Only works on URO Premium Oil Pan Limited Lifetime / Unlimited Mileage Warranty Guaranteed fitment Replaces hardened or cracking engine oil pan gaskets that allow vacuum leakage and degrade engine performance OE-style seal profile and durometer ensures proper compression seal between the engine block and oil pan High-quality seal material resists engine heat and oil degradation 24-Month Unlimited Mileage Warranty

Show More Show Less

5150 AutoSport Pro-Series Turbo Build Kit - BMW N55 Stage 2

T#:31755188

Part#: 5150-TBK-N55-100

Ships in 3 Business Days

$ 6,099.99 USD

Add to Wish List

Qty

$ 6,099.99 USD

Add to Wish List

The 5150 AutoSport Pro-Series Turbo Build Kit is made for high horsepower and turbocharged performace.

Eccentric Shaft Replacement Kit - N55/S55

T#:21735862

Part#: CAMGSKTN55S55KT

In Stock

$ 1,209.99 USD

Add to Wish List

Qty

$ 1,209.99 USD

Add to Wish List

When it comes to optimizing the performance and longevity of your BMW N55 or S55 engine, few upgrades can rival the impact of replacing the camshaft, bearings, and gaskets. These essential components play a pivotal role in your engine's overall health and performance, and upgrading them can deliver a host of benefits, from increased power to enhanced reliability. In this article, we'll explore the advantages of investing in these critical upgrades for your BMW N55 or S55 engine. Improved Performance: Upgrading your BMW N55 or S55 engine with a new camshaft can significantly boost its performance. A high-quality camshaft can optimize valve timing, leading to improved airflow and combustion efficiency. This, in turn, results in increased horsepower and torque, providing you with a more exhilarating driving experience. If you're seeking that extra punch when you hit the gas pedal, a new camshaft is the way to go. Enhanced Durability: The camshaft, bearings, and gaskets are fundamental components of your engine's internal structure. Over time, wear and tear can cause these parts to degrade, potentially leading to catastrophic engine failure. By replacing these components with high-quality, performance-oriented alternatives, you're not only increasing horsepower but also reinforcing the engine's durability. This can help prevent costly breakdowns and extend the life of your BMW engine. Optimal Efficiency: Efficiency is a key factor in engine performance. Worn-out bearings and gaskets can lead to oil leaks and reduced engine efficiency. Replacing them ensures a tighter seal, minimizing oil leaks and maintaining the proper lubrication for all moving parts. This leads to better fuel efficiency and a smoother, more reliable engine operation, all while reducing maintenance costs in the long run. Increased Resale Value: Investing in high-quality components like camshafts, bearings, and gaskets not only enhances your driving experience but also adds value to your BMW. When it's time to sell or trade-in your vehicle, potential buyers or dealerships will recognize the value of these upgrades, making your car more desirable and potentially increasing its resale value. Kit for All N55/S55 Engines

Show More Show Less

E90 / E92 / E93 M3 S65 WPC Bearing / ARP Rod Bolt Replacement Kit ...

T#:22196336

Part#: BEARINGBOLTARPKT

Ships in 3 Business Days

$ 1,806.99

This product was last offered at the strikethrough price on
02-28-2026

$ 1,799.99 USD

Add to Wish List

Qty

$ 1,799.99 USD

Add to Wish List

If you're the proud owner of a BMW E90 / E92 / E93 M3, chances are you're passionate about enhancing your vehicle's performance and longevity. One crucial upgrade that can significantly improve your driving experience is Turner Motorsport's WPC Rod Bearing Replacement Kit, coupled with ARP S65 Connecting Rod Bolts. Enhanced Durability: The WPC Performance Rod Bearing Replacement Kit is designed with superior materials and manufacturing processes. WPC treatment reinforces the surface of the bearings, making them highly resistant to wear, which is essential for high-revving engines like those found in the BMW E9X M3. This durability ensures your engine will stand the test of time, even under strenuous driving conditions. Improved Performance: By reducing friction and wear, WPC-treated rod bearings allow for smoother and more efficient engine operation. This translates into increased power and responsiveness, providing you with a more exhilarating driving experience. Whether you're tearing up the track or enjoying a spirited weekend drive, you'll notice a difference in your vehicle's performance. Precision Engineering: ARP S65 Connecting Rod Bolts are renowned for their precision engineering. Crafted from premium quality materials, these bolts offer exceptional tensile strength and structural integrity. This guarantees that your connecting rods will stay securely in place, even during high-stress situations. Your engine's components will work in perfect harmony, minimizing the risk of catastrophic engine failure. Preventative Maintenance: Proactively replacing your rod bearings and bolts with the WPC Performance Kit and ARP Rod Bolts can prevent potential engine failures. As engines age and accumulate miles, wear and tear become inevitable. These components help you address this issue head-on, preventing costly engine damage and repairs down the road. This is especially crucial for BMW E9X M3 owners who value their investment. Long-Term Cost Savings: While the initial investment in a WPC Performance Rod Bearing Replacement Kit and ARP Rod Bolts may seem substantial, it's a small price to pay for the long-term benefits. Preventing engine failure and costly repairs can save you thousands of dollars over the life of your vehicle, not to mention the peace of mind that comes with knowing your BMW is built for reliability. Extended Engine Life: With the combination of WPC-treated rod bearings and ARP Rod Bolts, you'll significantly extend your engine's life. This ensures that your beloved BMW E90 / E92 / E93 M3 remains in top condition for many more miles and years to come, preserving its value and performance. Included in the kit: 6 - WPC Treated Genuine BMW Bearings - Single Bearing 6 - WPC Treated Genuine BMW Bearings - Single Bearing 4 - Self-Locking Collar Nut - Priced Each 1 - Oil Pan Gasket 1 - Oil Filter Kit 1 - Oil Drain Plug 1 - ARP S65 Connecting Rod Bolt Kit 1 - Liqui Moly Race Tech GT1 10w-60 Engine Oil - 5 Liters 4 - Liqui Moly Race Tech GT1 10w-60 Engine Oil - 1 Liter 1 - Assembly Lube - 4 oz

Show More Show Less

Oil Pan Gasket - With Bolts

T#:15644297

Part#: 11132210959-KT

In Stock

Sale - Save 3% $ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.42 USD

Add to Wish List

Qty

Sale - Save 3%

$ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.42 USD

Add to Wish List

A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Valve Cover Gasket Set - E36 E34 with M50 VANOS

T#:337950

Part#: 11120034107

In Stock

Sale - Save 3% $ 98.99

This product was last offered at the strikethrough price on
07-06-2026

Starting at $ 96.34 USD

Add to Wish List

Sale - Save 3%

$ 98.99

This product was last offered at the strikethrough price on
07-06-2026

Starting at $ 96.34 USD

Add to Wish List

Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits M50 (M50TU) engine with VAN0S. This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others.

Alternate BMW part numbers:
11129070531

This item fits the following BMWs:
1993-1995 E36 BMW 325i 325is 325ic
1995 E36 BMW M3
1993-1995 E34 BMW 525i

Show More Show Less

S14 Bottom End Gasket Kit - E30 M3

T#:2587338

Part#: S14BOTTOMENDKT

Ships in 3 Business Days

$ 86.99 USD

Add to Wish List

Qty

$ 86.99 USD

Add to Wish List

All of the components necessary when servicing the bottom end or rod bearings of your S14 engine.

BMW M50 M52 S50 S52 Cut Ring Head Gasket

T#:45176130

Part#: ATH-CR330014

Back Ordered

$ 324.99 USD

Add to Wish List

Qty

$ 324.99 USD

Add to Wish List

Oil Filter Housing Gasket Kit

T#:15677487

Part#: 11427542983-KT

In Stock

$ 122.99 USD

Add to Wish List

Qty

$ 122.99 USD

Add to Wish List

Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.

Show More Show Less

Valve Cover replacement Kit

T#:15677546

Part#: 11121437395-KT

In Stock

Sale - Save 23% $ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.63 USD

Add to Wish List

Qty

Sale - Save 23%

$ 285.99

This product was last offered at the strikethrough price on
05-03-2026

$ 219.63 USD

Add to Wish List

Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. Years of exposure to extreme temperature change degrades the cover and the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.

Show More Show Less

Valve Cover Gasket kit

T#:15710829

Part#: 11127513195-KT

In Stock

Sale - Save 4% $ 264.99

This product was last offered at the strikethrough price on
03-26-2026

$ 253.07 USD

Add to Wish List

Qty

Sale - Save 4%

$ 264.99

This product was last offered at the strikethrough price on
03-26-2026

$ 253.07 USD

Add to Wish List

Keep oil in and abrasives out with a fresh valve cover gasket set. Replace heat-hardened, cracked gasket material and eliminate unsightly and potentially dangerous oil leaks. This OE kit contains everything you need to properly reseal the valve cover Includes valve cover gasket set and spark plug tubes

Show More Show Less

Ultimate Valve Cover Gasket Kit

T#:15677566

Part#: 11127528242-KT

In Stock

Sale - Save 11% $ 125.99

This product was last offered at the strikethrough price on
04-15-2026

$ 111.65 USD

Add to Wish List

Qty

Sale - Save 11%

$ 125.99

This product was last offered at the strikethrough price on
04-15-2026

$ 111.65 USD

Add to Wish List

Kit includes original equipment Elring brand valve cover gaskets and new Febi aluminum hardware. Replacing hardware is especially important during this repair job as the aluminum fasteners found securing your valve cover are torque to yield (one time use) hardware. Add an oil change kit to your cart for a comprehensive service.

Show More Show Less

Oil Cooler thermostat replacement kit

T#:41391173

Part#: 11428637820TKT

In Stock

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

BMW’s legendary turbocharged inline-6 engines demand consistent cooling to perform at their best. With the Oil Cooler Thermostat Replacement Kit - N54, N55, BMW enthusiasts can enjoy more reliable oil temperature regulation and enhanced performance both on the street and the track.

Show More Show Less

WPC Performance Rod Bearing Replacement Kit

T#:15677519

Part#: 112478345220KT

In Stock

Sale - Save 2% $ 1,596.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,572.45 USD

Add to Wish List

Qty

Sale - Save 2%

$ 1,596.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,572.45 USD

Add to Wish List

What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both. What are you waiting for? Use WPC-treated bearings on your next engine build or rod bearing service! Kit includes Upper and lower WPC Treated Genuine BMW Rod Bearings Hardware Oil filter Castrol TWS Edge Professional Oil pan gasket RedLine assembly lube

Show More Show Less

Valve Cover Replacement Kit

T#:15744072

Part#: 111214373950-KT

In Stock

Sale - Save 20% $ 278.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.87 USD

Add to Wish List

Qty

Sale - Save 20%

$ 278.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.87 USD

Add to Wish List

Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. Years of exposure to extreme temperature change degrades the cover and the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.

Show More Show Less

Valve Cover Replacement Kit

T#:15777295

Part#: 11127512839-KT

In Stock

Sale - Save 20% $ 278.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.87 USD

Add to Wish List

Qty

Sale - Save 20%

$ 278.99

This product was last offered at the strikethrough price on
05-03-2026

$ 223.87 USD

Add to Wish List

Keeping the oil inside your engine is extremely important to performance. Between oil change intervals, your oil can dip to dangerous levels if there is a leak you may not be aware of. The valve cover is an extremely common place for this to happen. Years of exposure to extreme temperature change degrades the cover and the gaskets and causes failure. Replace yours to keep your engine oil in your vehicle.

Show More Show Less

Alternator Gasket

2X Entries For Our G87 M2 Sweepstakes!

T#:587671

Part#: 12317507808PRM

In Stock

$ 5.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 5.99 USD

Limited Qty Sale

Add to Wish List

Common cause of leaks

Oil Filter Housing Gasket Replacement Kit

T#:15744018

Part#: 11427537293-KT

In Stock

$ 170.99 USD

Add to Wish List

Qty

$ 170.99 USD

Add to Wish List

If you have a leaking oil filter housing seal why not replace it while doing a oil service also and save down time on you car. The kit incudes a Oil service kit along with oil filter housing gasket, thermostat housing gasket.

Show More Show Less

Valley Pan Service Kit - Level 2

T#:15777315

Part#: 11141742042-KT

Ships on Sep 16, 2026

$ 464.99

This product was last offered at the strikethrough price on
04-06-2026

$ 458.99 USD

Add to Wish List

Qty

$ 458.99 USD

Add to Wish List

Valley pan gaskets are a common failure on the M62 motors, Symptoms can include a smell of coolant regularly or a mysterious loss of coolant with no identifiable leaks. This kit contains the basics need to be replaced when doing a valley pan gasket. The included Geba water pump has a metal impeller to replace the failure prone plastic OEM impeller. It is always a good idea to replace the accessory belts when ever they need to be removed to ensure proper tension and belt integrity. Kit includes Valley pan with rubber gasket: updated valley pan alleviates the core of the issue - the design! Valley pan securing hardware Valley pan heat shield Water pipe o-rings Water cross over gaskets Throttle body gasket Geba water pump with gasket Intake gaskets Accessory belt A/C belt

Show More Show Less

Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55

T#:56038085

Part#: 11137600482KT4

In Stock

$ 130.99 USD

Add to Wish List

Qty

$ 130.99 USD

Add to Wish List

This Hardware & Gasket Refresh Kit takes the guesswork out of maintenance. This kit bundles a high quality replacement oil pan gasket with a fresh, complete set of factory spec aluminum hardware. Whether you are dropping the subframe for a preventative overhaul or chasing down an active oil leak

Show More Show Less

Genuine BMW Oil Pan Replacement Kit with Gasket and Hardware - N55 ...

T#:56038088

Part#: 11137600482KT5

In Stock

$ 267.72 USD

Add to Wish List

Qty

$ 267.72 USD

Add to Wish List

This overhaul kit tackles the oil pan leak head-on while giving you a complete, high-performance oil service in one shot. It features a heavy-duty oil pan gasket paired with the mandatory single-use aluminum stretch bolts that must be replaced during installation.

Show More Show Less

Elring Oil Pan Gasket And CRP Hardware Set

T#:56218592

Part#: 1137548031ELRKT2

In Stock

$ 82.99 USD

Add to Wish List

Qty

$ 82.99 USD

Add to Wish List

This Oil Pan Refresh Kit pairs a high tier Elring sealing gasket with the complete factory spec aluminum bolt set required for proper reassembly.

Project Cars

SELECT YOUR BMW

BMW Gaskets, Gasket Sets, Seals, & O-Rings

Sub-Categories

Enhance the performance and longevity of your BMW S65 engine with this all-inclusive valve cover gasket service kit!

Kit Includes:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results