ECS Tuning's Polyurethane Transmission Mounts are designed to address the vital role of transmission mounts in your vehicle's suspension. The factory mounts are notorious for failures that can result in over-revving, mis-shifts, and in extreme cases, potential chassis damage. Our polyurethane mounts provide a robust solution, engineered for both street and track applications, guaranteeing enhanced performance while eliminating concerns about torn mounts.

Polyurethane stands out with its exceptional toughness, durability, and impressive wear resistance compared to rubber. It also exhibits resistance to water, oil, and grease while retaining its original shape even when subjected to significant compression. By reducing deflection, polyurethane facilitates effective power transfer. While there may be a slight increase in NVH (Noise, Vibration, Harshness), the benefits far outweigh this minor compromise in ride comfort. With a polyurethane durometer of 70A, our street mounts are versatile, offering both daily driving comfort and track durability. For more track-oriented enthusiasts, we provide stiffer mounts with an 80A durometer rating.

For a hassle-free installation, we supply a comprehensive DIY guide. ECS Tuning ensures that you are fully supported from start to finish.

This braided stainless steel line replaces the stock hydraulic hose connecting your clutch slave cylinder to the clutch master cylinder. There are several deficiences with rubber, especially as it ages - when new the rubber expands and swells under pressure and the pedal can feel spongy. As rubber ages and is exposed to extreme temperatures the rubber can harden and even shrink (common on brake hoses), which results in a stiff pedal. Rubber clutch lines do not stand up to the stresses of hard use. ECS Exact-Fit stainless reinforced clutch lines provide more confident and dependable shifting by maintaining consistent line pressure, long lasting corrosion resistance, and increased protection from failure. These lines are reinforced with braided stainless steel mesh, affording superior expansion resistance. This resistance to expansion creates a firmer pedal, and a more direct clutch pedal feel. The signature red polymer coating provides additional protection from the elements and abrasion.

This particular stainless steel clutch line fits the following BMWs:
1999-2005 E46 3 Series (all) including 323i, 323Ci, 325i, 325xi, 325Ci, 328i, 328Ci, 330i, 330xi, 330Ci
2001-2006 E46 M3 (manual transmission only, no SMG)
2004-2009 X3 SAV including X3 2.5, X3 3.0

This braided stainless steel line replaces the stock hydraulic hose connecting your clutch slave cylinder to the clutch master cylinder. There are several deficiences with rubber, especially as it ages - when new the rubber expands and swells under pressure and the pedal can feel spongy. As rubber ages and is exposed to extreme temperatures the rubber can harden and even shrink (common on brake hoses), which results in a stiff pedal. Rubber clutch lines do not stand up to the stresses of hard use. ECS Exact-Fit stainless reinforced clutch lines provide more confident and dependable shifting by maintaining consistent line pressure, long lasting corrosion resistance, and increased protection from failure. These lines are reinforced with braided stainless steel mesh, affording superior expansion resistance. This resistance to expansion creates a firmer pedal, and a more direct clutch pedal feel. The signature red polymer coating provides additional protection from the elements and abrasion.

This particular stainless steel clutch line fits the following BMWs:
1992-1997 E36 BMW 318i 318is 318ic 318ti 325i 325is 325ic
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5 Z3 2.8
1998-2000 Z3 BMW M Roadster M Coupe (S52)

This braided stainless steel line replaces the stock hydraulic hose connecting your clutch slave cylinder to the clutch master cylinder. There are several deficiences with rubber, especially as it ages - when new the rubber expands and swells under pressure and the pedal can feel spongy. As rubber ages and is exposed to extreme temperatures the rubber can harden and even shrink (common on brake hoses), which results in a stiff pedal. Rubber clutch lines do not stand up to the stresses of hard use. ECS Exact-Fit stainless reinforced clutch lines provide more confident and dependable shifting by maintaining consistent line pressure, long lasting corrosion resistance, and increased protection from failure. These lines are reinforced with braided stainless steel mesh, affording superior expansion resistance. This resistance to expansion creates a firmer pedal, and a more direct clutch pedal feel. The signature red polymer coating provides additional protection from the elements and abrasion.

This particular stainless steel clutch line fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1988 E28 BMW M5
1987-1989 E24 BMW M6 

This braided stainless steel line replaces the stock hydraulic hose connecting your clutch slave cylinder to the clutch master cylinder. There are several deficiences with rubber, especially as it ages - when new the rubber expands and swells under pressure and the pedal can feel spongy. As rubber ages and is exposed to extreme temperatures the rubber can harden and even shrink (common on brake hoses), which results in a stiff pedal. Rubber clutch lines do not stand up to the stresses of hard use. ECS Exact-Fit stainless reinforced clutch lines provide more confident and dependable shifting by maintaining consistent line pressure, long lasting corrosion resistance, and increased protection from failure. These lines are reinforced with braided stainless steel mesh, affording superior expansion resistance. This resistance to expansion creates a firmer pedal, and a more direct clutch pedal feel. The signature red polymer coating provides additional protection from the elements and abrasion.

This particular stainless steel clutch line fits the following BMWs:
1996-1999 E36 BMW 323ic 323is 328i 328is 328ic
1995-1999 E36 BMW M3
1993-1995 E34 BMW 530i 540i 

This braided stainless steel line replaces the stock hydraulic hose connecting your clutch slave cylinder to the clutch master cylinder. There are several deficiences with rubber, especially as it ages - when new the rubber expands and swells under pressure and the pedal can feel spongy. As rubber ages and is exposed to extreme temperatures the rubber can harden and even shrink (common on brake hoses), which results in a stiff pedal. Rubber clutch lines do not stand up to the stresses of hard use. ECS Exact-Fit stainless reinforced clutch lines provide more confident and dependable shifting by maintaining consistent line pressure, long lasting corrosion resistance, and increased protection from failure. These lines are reinforced with braided stainless steel mesh, affording superior expansion resistance. This resistance to expansion creates a firmer pedal, and a more direct clutch pedal feel. The signature red polymer coating provides additional protection from the elements and abrasion.

This particular stainless steel clutch line fits the following BMWs:
2004-2010 E60/E61 5 Series 
2004-2010 E63/E64 6 Series (manual transmission only, no SMG)
2011-20116 F07/F10 5 Series 
2011-2016 F06/F12/F13 6 Series

All new hardware for installing your G260 on an M20 motor, including new dowels and 10mm bolt that goes from the engine side into the transmission.

Whether your refreshing the transmission, doing the clutch and flywheel or doing a manual swap get a new set of hardware for piece of mind and many more service intervals.

Kit Contents:

M12x45 Torx bolt - 23001222890 (QTY2)
M12x75 Torx bolt - 23001222893 (QTY2)
Washer - 07119906063 (QTY 4)
Dowel - 11117524470 (QTY2)
M8x50 ASA Bolt - 23001222887 (QTY 4)
Wave Washer - 07119904115 (QTY 4)
M6x16 Hex Bolt - 07119913015 (QTY 1)
M10x65 Torx Bolt - 07129904681 (QTY2)
Wave Washer - 07119904463 (QTY2)
Hex Nut - 07129904865 (QTY2)

Eliminate the factory clutch delay valve and enjoy faster, more precise clutch engagement with the ECS Clutch Delay Valve (CDV) Removal Tool Kit. Designed for F and G-Chassis manual BMWs, this kit makes removing the hydraulic restrictor safe, simple, and reliable, no slave cylinder removal required.

Most modern BMWs come from the factory with a plastic slave cylinder featuring a CDV, intended to smooth engagement and reduce driveline shock for less experienced drivers. In practice, this restrictor can dull pedal feedback, slow shifts, and increase clutch wear. Removing it restores the sharp, direct clutch feel that BMW enthusiasts expect.

Key Benefits:

Faster, more predictable clutch engagement
Sharper pedal response and connected driving feel
No need to remove the slave cylinder
Tool Design:

Machined from durable 304 stainless steel
Includes precision removal and insertion tools
Knurled grip for easy handling
Built-in depth and angle control protects internal surfaces and ensures proper grommet alignment
Removal and Installation:

Disconnect the Clutch Line
Remove the clutch line from the slave cylinder to access the factory clutch delay valve.
Remove the Restrictor Plate
Thread the removal tool into the center of the small grommet. Once engaged, carefully pull the tool to remove the grommet and restrictor plate. The small rubber sealing O-ring will come out along with the plate.
Reinstall the O-Ring
Place the rubber O-ring onto the installation tool. Insert the tool into the slave cylinder to properly seat the O-ring in its original position.
Reconnect and Bleed the Clutch
Reattach the clutch line, add fluid, and bleed the system according to your manufacturer’s instructions.
Enjoy Enhanced Clutch Feel
With the delay valve removed, your clutch now engages faster and more predictably, giving your manual transmission the sharp, connected feel it was designed for.

Enhance your driving experience with ECS Tuning's Performance Polyurethane Differential Bushings. These meticulously engineered bushings offer a direct connection between your right foot, the engine, and the chassis, making them an essential upgrade.

• Say goodbye to the softness of factory rubber differential bushings that absorb vibrations and reduce performance.
• ECS Tuning's polyurethane bushings eliminate the deflection found in factory rubber bushings, resulting in improved power transfer from the differential to the wheels.
• Experience enhanced throttle control, whether you're navigating a challenging canyon road, drag racing, or simply commuting.

Unlike delrin or solid differential mounts, these bushings deliver improved performance without introducing harshness or excessive vibration.

Crafted from durable 88A durometer polyurethane and enhanced with a black anodized 6061-T6 aluminum sleeve.

Resistant to chemicals, ozone degradation, road salt, and general wear and tear, ensuring a longer service life.

Upgrade Your BMW Shifter with the BMW Teflon Shifter Bushing Kit

• Enhanced shifting precision for a smoother driving experience
• Durable Teflon construction for long-lasting performance
• Reduces play and slop in the shifter mechanism
• Easy installation with included hardware and instructions

Enhance the performance of your BMW's shifter with the BMW Teflon Shifter Bushing Kit. This kit is designed to provide enhanced shifting precision, resulting in a smoother and more responsive driving experience. Crafted from durable Teflon material, these bushings offer long-lasting performance and reliability. By reducing play and slop in the shifter mechanism, this kit ensures precise gear changes every time you shift. Installation is quick and easy with the included hardware and detailed instructions, allowing you to enjoy the benefits of improved shifter performance in no time. Access Secret Premium Dashboard

This hand held Schwaben tool makes changing fluids an easy, quick task.The Schwaben fluid suction/fill pump suitable for oils, water and any non corrosive liquid.

Features 

• Comes with a flexible and a rigid tube. 
• Flow rate is adjustable for different functions.
• 350 ML capacity
• Cylinder is marked in 20 mL increments and fraction of quarts for accurate filling. 

Not for use with gasoline.

Checking or changing your MINI Cooper's transmission fluid can be a real challenge. But fear not, the Schwaben MINI Automatic Transmission Plug Socket is here to make your life easier.

Designed specifically for MINI Coopers, this Plug Socket Tool eliminates the struggle of accessing the fill plug. Its compact size allows easy maneuverability in tight spots, making transmission fluid checks and changes a breeze. Unlike standard sockets, our specialized socket fits snugly on the drain plug's outer diameter, ensuring stability during use.

The benefits are crystal clear: save time and effort when inspecting, altering, or adding transmission fluid. With our MINI plug socket, removing and installing the fill plug becomes a piece of cake. Say farewell to frustration and hello to efficiency, all thanks to this innovative socket solution.

Shifter slop is a common complaint among all BMW models. Some of that play comes from the bushings where the shifter carrier mounts to the transmission. The original rubber carrier bushings don't last very long and when they get too soft the shifter flops around. These Teflon bushings are not as stiff as Delrin so they won't transmit as much vibration and buzz in the shifter. Yet Teflon will last much longer than the factory rubber, giving you precise shifting for many years.

Note: this is only one part of the shift linkage and there may be other components that need replacing to improve shifting feel.

We advise getting a replacement bushing carrier pin as well. If the original rubber bushings are worn the pin will have wear too and you will still have slop in the shifter, even with the new bushings.

These are the ROUND shifter carrier bushings (some BMW models have oval bushings).

This item fits the following BMWs:
6/1986-1992 E30 BMW 318i 318is 325e 325es 325i 325is 325ic M3
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic
1999-2006 E46 BMW 323i 323ci 325i 325ci
1982-1988 E28 BMW 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 535i M5