Find Parts That Fit Your Vehicle

BMW Drivetrain Parts

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:

IRP - Individual Racing Parts - Corporate Logo
T#:569029
Part#: IRPSS-3BCS
In Stock
$ 475.99 USD
Free Shipping
$ 475.99 USD
Free Shipping
IRP (Individual Race Parts) is a performance aftermarket parts company that focuses on high quality and long term reliability. The Universal Short Shifter V3 CS was developed to express their belief and compete with the much more expensive CAE Ultra Shifter, but at half the cost. The entire shifter assembly is made from all anodized aluminum and stainless steel for strength, durability, and looks. The V3 CS is a perfect replacement when looking for a shifter that gives you short, crisp, precise shifts with a 60% reduction in travel, plus a new return to center feature.
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:569037
Part#: IRPSS-DB
In Stock
$ 52.99 USD
Free Shipping on orders $49 and up
Developed specifically for the IRP V2, V3, and V3 CS Short shifters, this Dust Boot mounts to the short shifters base to keep out dirt and noise that would normally come through the otherwise unprotected opening in your center console.
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:401413
Part#: IRPEGS-2
In Stock
$ 185.99 USD
Free Shipping
$ 185.99 USD
Free Shipping

Stock mounts are made from soft rubber and are sometimes filled with fluid to give a car the most comfortable ride possible. The soft rubber and fluid helps to reduce the total amount of vibration, noise, and harshness (NVH) that is transferred into the cabin. The problem with this is driveline slop. The stock mounts allow a lot of excess movement and increases the amount of time it takes to transfer power to the wheels.

In order to address this issue, performance mounts can be substituted to reduce the amount of slop and transfer power to the wheel quicker. Two options for this are polyurethane mounts and solid mounts.

Solid mounts are great for an immediate transfer of power but allow for a ton of noise and vibration to be felt and heard in the cabin of the vehicle. This is great for the track where there aren't any issues with excess harshness, but as a daily driver, this can become an annoying pain in the neck.

The best middle ground is Polyurethane. Polyurethane is much stiffer than rubber and gives you the much stiffer feel you may be looking for. This allows for the increase in responsiveness, but isn't so extreme that it transfers all of the sound and vibrations into the cabin. This makes it much more comfortable for daily use while still reinforcing your driveline.

Features:

  • Aluminum and Polyurethane Construction
  • 80A Durometer Rating
  • New Hardware
Show More Show Less

Whiteline - Corporate Logo
T#:26938502
Part#: KDT919
Ships in 4 Business Days
$ 96.99 USD
Free Shipping on orders $49 and up
After thorough development and material testing aimed at achieving strength, durability, geometry retention, and memory without compromising comfort, WHITELINE has introduced a progressive, long-chain Synthetic Elastomer. This groundbreaking material combines the advantages of solid bushings with the flexibility characteristics of rubber, striking an optimal balance between performance and comfort.
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:401430
Part#: IRPFD-78-12
In Stock
$ 123.99 USD
Free Shipping
$ 123.99 USD
Free Shipping

Stock rubber flex discs allow for a slight amount of give, especially under heavy acceleration and, depending on the amount of force applied, could potentially tear or split. This slight flex/give can prevent instantaneous transfer of force to the wheels, making accelerations unpredictable, or even lead to your vehicle being stuck on the side of the track. To combat this, IRP's Performance Flex Disc was developed. Made of CNC machined aluminum, this flex disc won't actually flex, and the polyurethane bushings will only provide a enough give to dampen some vibrations and prevent damaging the transmission. This is perfect for high torque applications such a drag cars and dedicated track cars that want immediate response and long term reliability.

78mm Diameter with fitment for M12 nuts/bolts.

Applicatons: 
1992-1998 E36 BMW 318i 318is 318ti 318ic - Manual Transmission 
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic - Manual and Automatic Transmission 
1992-1998 E36 BMW 328i 328is 328ic - Automatic Transmission 
1999-2005 E46 BMW 323i 323ci 325i 325ci - Manual Transmission 
1997-2002 Z3 BMW Z3 1.9 - Manual Transmission 
1999-2000 Z3 BMW Z3 2.3 M52TU - Manual and Automatic Transmission 
2001-2002 Z3 BMW Z3 2.5i - Manual Transmission 
1997-4/1999 Z3 BMW Z3 2.8 - Automatic Transmission 
2003-2006 Z4 BMW Z4 2.5i - Manual and Automatic Transmission 

Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:401428
Part#: IRPFD-96
In Stock
$ 165.00 USD
Free Shipping
$ 165.00 USD
Free Shipping

Stock rubber flex discs allow for a slight amount of give, especially under heavy acceleration and, depending on the amount of force applied, could potentially tear or split. This slight flex/give can prevent instantaneous transfer of force to the wheels, making accelerations unpredictable, or even lead to your vehicle being stuck on the side of the track. To combat this, IRP's Performance Flex Disc was developed. Made of CNC machined aluminum, this flex disc won't actually flex, and the polyurethane bushings will only provide a enough give to dampen some vibrations and prevent damaging the transmission. This is perfect for high torque applications such a drag cars and dedicated track cars that want immediate response and long term reliability.

96mm Diameter

Fits the following BMWs:
2008+ E82 BMW 128i
5/1986-1991 E30 BMW 325e 325es M3 - Manual Transmission 
1987-1991 E30 BMW 325ix - Between Transmission & Transfer Case
1996-1998 E36 BMW 328i 328is 328ic - Manual Transmission only 
1999-2005 E46 BMW 323i 323ci 325i 325ci - Automatic & SMG Transmissions only 
1999-2005 E46 BMW 328i 328ci 330i 330ci - Manual, Auto, and SMG
2006+ E90 BMW 325i 328i 330i - Manual or Automatic Transmission 
2006+ E91 BMW 328i - Manual or Automatic Transmission 
2007+ E92 BMW 328i - Manual or Automatic Transmission 
2007+ E93 BMW 328 - Manual or Automatic Transmission 
1982-1983 E28 BMW 528e - Manual Transmission
5/1986-1988 E28 BMW 528e - Manual Transmission
1982-1988 E28 BMW 533i 535i 535is M5 - Manual Transmission 
1991-1995 E34 BMW 525i - Automatic Transmission
1989-6/1992 E34 BMW 525i - Manual Transmission
1993-1995 E34 BMW 530i - Manual or Automatic Transmission
1989-1993 E34 BMW 535i - Manual Transmission
2001-2003 E39 BMW 525i - Automatic Transmission
1997-2003 E39 BMW 528i 530i - Manual or Automatic Transmission 
1980-1989 E24 BMW 633csi 635csi M6 - Manual Transmission
2000-2006 E53 BMW X5 3.0i - for Rear Driveshaft
2000-2003 E53 BMW X5 4.4i X5 4.6is - for Rear Driveshaft
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive48i - for Rear Driveshaft 
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i - Automatic Transmission 
1997-2002 Z3 BMW Z3 2.8 Z3 3.0i - Manual or Automatic Transmission 
2003-2008 Z4 BMW Z4 2.5i - Automatic or SMG Transmission
2003-2008 Z4 BMW Z4 3.0i Z4 3.0si 

Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:401279
Part#: IRPSS-3B
Ships on Oct 19, 2026
$ 536.99 USD
Free Shipping
$ 536.99 USD
Free Shipping
The shifter in manual BMWs are said to provide a perfect blend of a sporty and comfortable feel. For some, this is perfect. For others that daily drive or track their BMW, they want shorter shifter travel and a much tighter feel. If you are one of these people, then we have a great option for you, the Short Shifter V3 from IRP, the successor of the V2.
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:4469704
Part#: IRPSS46-MB
Ships on Oct 19, 2026
$ 110.99

This product was last offered at the strikethrough price on
05-27-2026

$ 95.99 USD
Free Shipping on orders $49 and up
$ 95.99 USD
Free Shipping on orders $49 and up
Already own an IRP V2 or V3 short shifter but want a cleaner installation? This E46 Mounting plate can transform your universal-style short shifter into a direct-fit bolt-on shifter specifically for your E46! CNC milled and Anodized coated, this shifter plate is designed to allow your shifter to be upgraded to a Plug & Play style, utilizing the factory shifter mounting points for a simple and reliable install. NOTE: Does not fit BMW V3 Self Centering short shifters, only standard V2 and V3 shifters.
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:401427
Part#: IRPFD-110
Special Order: No Guaranteed ETA
$ 178.99 USD
Free Shipping
$ 178.99 USD
Free Shipping

Stock rubber flex discs allow for a slight amount of give, especially under heavy acceleration and, depending on the amount of force applied, could potentially tear or split. This slight flex/give can prevent instantaneous transfer of force to the wheels, making accelerations unpredictable, or even lead to your vehicle being stuck on the side of the track. To combat this, IRP's Performance Flex Disc was developed. Made of CNC machined aluminum, this flex disc won't actually flex, and the polyurethane bushings will only provide a enough give to dampen some vibrations and prevent damaging the transmission. This is perfect for high torque applications such a drag cars and dedicated track cars that want immediate response and long term reliability.

110mm Diameter

This item fits the following BMW Chassis: 
E60 M5,E63 M6,E63,E90,E92,E93 

Show More Show Less

Fall Line - Corporate Logo
T#:5498480
Part#: FLM-DCT-HC
In Stock
$ 899.99

This product was last offered at the strikethrough price on
06-01-2026

$ 845.99 USD
Limited Qty Sale
Free Shipping
$ 899.99

This product was last offered at the strikethrough price on
06-01-2026

$ 845.99 USD
Limited Qty Sale
Free Shipping
Like the DCT oil pan, the plastic OEM hydraulics cover is prone to fatiguing from heat cycling; not ideal considering the important parts that reside behind it. And also like it's oil pan sibling, the Fall-Line hydraulics cover uses a bespoke Viton O-Ring that resides within a clever internal channel. Viton O-Rings, due to their exceptional resistance to temperature extremes (-20°F to 400°F operating temp) and low gas permeability, have incredible aging characteristics and therefore eliminate the need for regular replacement.
Show More Show Less
Whiteline - Corporate Logo
T#:26671635
Part#: W92623
In Stock at Vendor
$ 32.99 USD
Free Shipping on orders $49 and up
The subframe serves as the mounting point for your rear suspension system. It connects to the body using bushings designed to absorb vibrations at all attachment points. These bushings play a crucial role in dampening vibrations that could otherwise be transmitted to the cabin, ensuring the subframe remains stable. Additionally, they provide a secure mounting surface, maintaining tightness throughout the assembly. If you notice excessive vibration inside your cabin or hear clunking or knocking sounds when driving over bumps, the issue may be related to your subframe bushings.
Show More Show Less


AAF Race Shifter w/Adjustable Shift Shaft - E30 5-Speed
For vehicles with 5-speed transmissions
Advanced Auto Fabrication - Corporate Logo
T#:7624623
Part#: 116149
Ships in 4 Business Days
$ 1,245.00 USD
Free Shipping on orders $49 and up
AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. E30 Applications: Race: bolts in on the sides of the transmission tunnel to eliminate any flex in the sheet metal Street: precision water-jet cut flat plate that reinforces the chassis from directly beneath the shifter All other information and installation details available on AAF's website!
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:5189134
Part#: ATK-BM-0110
Ships in 7 Business Days
$ 250.00 USD
Free Shipping on orders $49 and up
AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. Autotecknic has designed gear selector trim for the G05 X5, G06 X6, and G07 X7 composed of 3k twill weave carbon fiber. Includes guide for installation. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.
Show More Show Less
AAF Race Shifter W/Adjustable Shift Shaft - E46 6-Speed
For vehicles with 6-speed transmissions
Advanced Auto Fabrication - Corporate Logo
T#:7624620
Part#: 116147-6
Ships in 4 Business Days
$ 1,244.99 USD
Free Shipping on orders $49 and up
AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. All other information and installation details available on AAF's website!
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:2423579
Part#: IRPEM-9XAL
Special Order: No Guaranteed ETA
$ 264.99 USD
Free Shipping on orders $49 and up
Direct replacement performance mounts. Features: CNC machined lightweight high quality anodized aluminum Replaces OE: 22116760330; 22116773744 Includes: 2 pcs. aluminum engine mounts

IRP - Individual Racing Parts - Corporate Logo
T#:401261
Part#: IRPSS-2B
Special Order: No Guaranteed ETA
$ 420.99 USD
Free Shipping
$ 420.99 USD
Free Shipping
The shifter in manual BMWs are said to provide a perfect blend of a sporty and comfortable feel. For some, this is perfect. For others that daily drive or track their BMW, they want shorter shifter travel and a much tighter feel. If you are one of these people, then we have a great option for you, the Short Shifter V2 from IRP.
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:587016
Part#: IRPDB-9XMAL
Special Order: No Guaranteed ETA
$ 133.99 USD
Free Shipping
$ 133.99 USD
Free Shipping
These aluminum mounts are a direct replacement for the stock rubber bushings and have been lightened to remove excess weight. Using aluminum instead of rubber eliminates the "wind up" inherent in rubber mounts, and this deflection slows suspension & drivetrain response. The tradeoff is an increase in NVH. Features: Stiffens chassis/Improves stability Less wear of other components Better durability Provides better control of chassis geometry Replaces OE: 33312284019, 33312283384 Recommended for racing use only Includes: 1 rear aluminum bushing 2 front aluminum bushings
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:401429
Part#: IRPFD-78-10
Ships on Sep 16, 2026
$ 123.99 USD
Free Shipping
$ 123.99 USD
Free Shipping

Stock rubber flex discs allow for a slight amount of give, especially under heavy acceleration and, depending on the amount of force applied, could potentially tear or split. This slight flex/give can prevent instantaneous transfer of force to the wheels, making accelerations unpredictable, or even lead to your vehicle being stuck on the side of the track. To combat this, IRP's Performance Flex Disc was developed. Made of CNC machined aluminum, this flex disc won't actually flex, and the polyurethane bushings will only provide a enough give to dampen some vibrations and prevent damaging the transmission. This is perfect for high torque applications such a drag cars and dedicated track cars that want immediate response and long term reliability.

78mm Diameter with fitment for M10 nuts/bolts.

Fits the following BMWs:
1977-1983  E21  - 320i 
1983-5/1986  E28  - 528e - Manual Transmission 
5/1986-1988  E28  - 528e - Manual or Automatic Transmission 
1984-1991  E30  - 318i, 318is, & 318ic 
1984-1986  E30  - 325e/es (thru 04/1986) 
1986-1991  E30  - 325i, 325is, 325ic 
1987-1991  E30  - 325ix 
1992-1997  E36  - 318i 318is 318ic - For Automatic Transmission only 
1996-1998  Z3  - Z3 1.9 liter roadster

Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:401414
Part#: IRPEGS-1
Special Order: No Guaranteed ETA
$ 185.99 USD
Free Shipping
$ 185.99 USD
Free Shipping

Stock mounts are made from soft rubber and are sometimes filled with fluid to give a car the most comfortable ride possible. The soft rubber and fluid helps to reduce the total amount of vibration, noise, and harshness (NVH) that is transferred into the cabin. The problem with this is driveline slop. The stock mounts allow a lot of excess movement and increases the amount of time it takes to transfer power to the wheels.

In order to address this issue, performance mounts can be substituted to reduce the amount of slop and transfer power to the wheel quicker. Two options for this are polyurethane mounts and solid mounts. 

The middle ground is Polyurethane. Polyurethane is much stiffer than rubber, but these still let a large amount of movement in comparison to solid mounts. These are great for sporty, aggressive street driving, but for the track are not ideal.

For the track, solid mounts are great. Solid mounts give you an immediate transfer of power, at the cost of increase NVH. This is great for the track where comfort is the least of your worries and power is all that is important.

Features:

  • Aluminum and Polyurethane Construction
  • 80A Durometer Rating
  • New Hardware
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:4469703
Part#: IRPSS46-3B
Special Order: No Guaranteed ETA
$ 505.00 USD
Free Shipping
$ 505.00 USD
Free Shipping
A direct-fit performance, manual short shifter that gives you the quick and easy shifts you are looking for, without breaking the bank!

Fall Line - Corporate Logo
T#:5498483
Part#: FLM-DCT-PKG
Back Ordered
$ 1,999.00 USD
Free Shipping
$ 1,999.00 USD
Free Shipping
The Ultimate DCT Track Package. Period! Fall-Line has designed an incredible 6061-T6 aluminum oil pan and matching hydraulics cover for DCT cars. The plastic OEM parts are prone to failure from heat-cycling and use a brittle gasket that requires replacement over time. The Fall-Line parts use a bespoke Viton O-Ring that resides within a clever internal channel. Viton O-Rings, due to their exceptional resistance to temperature extremes (-20°F to 400°F operating temp) and low gas permeability, have incredible aging characteristics and therefore eliminate the need for regular replacement.
Show More Show Less
Fall Line - Corporate Logo
T#:5498479
Part#: FLM-DCT-PAN
Back Ordered
$ 899.00 USD
Free Shipping
$ 899.00 USD
Free Shipping
The plastic OEM pan is prone to leaking and uses a brittle gasket that requires replacement over time. The Fall-Line pan uses a bespoke Viton O-Ring that resides within a clever internal channel. Viton O-Rings, due to their exceptional resistance to temperature extremes (-20°F to 400°F operating temp) and low gas permeability, have incredible aging characteristics and therefore eliminate the need for regular replacement.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39599355
Part#: TO-0264-DCG-W
Ships in 7 Business Days
$ 394.99 USD
Free Shipping on orders $49 and up
Upgrade the driving experience and interior aesthetics of your A90 Toyota Supra with the AutoTecknic Dry Carbon Battle Version Shift Paddles, engineered for precision, style, and performance.


AUTOTECKNIC - Corporate Logo
T#:39059234
Part#: BM-0264-DCG-R
Ships in 7 Business Days
$ 395.00 USD
Free Shipping on orders $49 and up
Upgrade your BMW G05 X5, G06 X6, or G07 X7 with the AutoTecknic Dry Carbon Battle Version Shift Paddles from Turner Motorsport and enjoy a refined, high-performance driving experience.
AUTOTECKNIC - Corporate Logo
T#:39059237
Part#: BM-0264-DCG-W
Ships in 7 Business Days
$ 395.00 USD
Free Shipping on orders $49 and up
We understand all car enthusiasts' goals—to go as fast as possible while maintaining safety and a comfortable position in the pilot’s seat at the same time. When it comes to piloting a vehicle, the driver is at optimum control when they become one with the car. These paddle shifters are offered in a gloss finish with White Indicators.
Show More Show Less
AAF Race Shifter W/Adjustable Shift Shaft - E36 6-Speed
For vehicles with 6-speed transmissions
Advanced Auto Fabrication - Corporate Logo
T#:7624621
Part#: 116148-6
Ships in 4 Business Days
$ 1,245.00 USD
Free Shipping on orders $49 and up
AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. All other information and installation details available on AAF's website!
Show More Show Less

AAF Race Shifter w/Adjustable Shift Shaft - E36 5-Speed
For vehicles with 5-speed transmissions
Advanced Auto Fabrication - Corporate Logo
T#:7624622
Part#: 116148
Ships in 4 Business Days
$ 1,245.00 USD
Free Shipping on orders $49 and up
AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. All other information and installation details available on AAF's website!
Show More Show Less

AAF Street Shifter W/Adjustable Shift Shaft - E30 6-Speed
For vehicles with 6-speed transmissions
Advanced Auto Fabrication - Corporate Logo
T#:7624628
Part#: 116149.1-6
Ships in 4 Business Days
$ 1,245.00 USD
Free Shipping on orders $49 and up
AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's Street Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Street Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Street Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Street Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Street Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. E30 Applications: Race: bolts in on the sides of the transmission tunnel to eliminate any flex in the sheet metal Street: precision water-jet cut flat plate that reinforces the chassis from directly beneath the shifter All other information and installation details available on AAF's website!
Show More Show Less
AAF Race Shifter W/Adjustable Shift Shaft - E30 6-Speed
For vehicles with 6-speed transmissions
Advanced Auto Fabrication - Corporate Logo
T#:7624624
Part#: 116149-6
Ships in 4 Business Days
$ 1,245.00 USD
Free Shipping on orders $49 and up
AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. E30 Applications: Race: bolts in on the sides of the transmission tunnel to eliminate any flex in the sheet metal Street: precision water-jet cut flat plate that reinforces the chassis from directly beneath the shifter All other information and installation details available on AAF's website!
Show More Show Less

AAF Street Shifter W/Adjustable Shift Shaft - E30 5-Speed
For vehicles with 5-speed transmissions
Advanced Auto Fabrication - Corporate Logo
T#:7624627
Part#: 116149.1
Ships in 4 Business Days
$ 1,245.00 USD
Free Shipping on orders $49 and up
AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's Street Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Street Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Street Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Street Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Street Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. E30 Applications: Race: bolts in on the sides of the transmission tunnel to eliminate any flex in the sheet metal Street: precision water-jet cut flat plate that reinforces the chassis from directly beneath the shifter All other information and installation details available on AAF's website!
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39599352
Part#: TO-0264-DCG-R
Ships in 7 Business Days
$ 394.99 USD
Free Shipping on orders $49 and up
Elevate your Toyota Supra A90’s interior with the AutoTecknic Dry Carbon Battle Version Shift Paddles, and experience a superior driving experience with enhanced performance and bold style.

AAF Race Shifter w/Adjustable Shift Shaft - E46 5-Speed
For vehicles with 5-speed transmissions
Advanced Auto Fabrication - Corporate Logo
T#:7608883
Part#: 116147
Ships in 4 Business Days
$ 1,245.00 USD
Free Shipping on orders $49 and up
AAF Racing have been building race cars for more than 8 years and have been installing all types and brands of after market shifters. Using all of that knowledge, AAF has incorporated all of this into their new innovative design. AAF's BMW Race Shifter with Adjustable Shift Shaft has a very wide array of available adjustments allowing you the ability to tune it exactly to your liking. If you want to change something about the way it works, most likely there is an adjustment for it! Adjustable Features: Throw Ratio: The knob height must remain at the same height and position for obvious ergonomic reasons. This means in order to incorporate a throw ratio adjustment WITHOUT changing the position of the knob or the pivot point, the location of the shift shaft connection must move closer or farther from the pivot point. This is done in the lower section of the shift lever. Adjustable Shift Shaft Included: Included is the AAF Adjustable Shift Shaft as they believe this allows for optimal shifting. With an adjustable shift shaft, you are able to move the shift knob forwards or backwards, as well as left or right (closer or farther from the steering wheel). You can make all these changes without affecting the spring position of 3rd and 4th gears. The shift shaft has an adjustment range from 165mm to 245mm. Knob Height: The AAF Race Shifter is capable of a total knob height change of 50mm while still having 3 different options for throw ratio. There are two knob spacers included, a 25mm and 50mm. This allows you to thread the knob down tight and lock it into place. Spring Center: Coupled with the AAF Adjustable Shift Shaft, the position of where your AAF Shifter springs to center is totally adjustable. There are two screws per center locator that can be used when setting your center position, then the upper cap will be locked down to ensure your center preference position never moves out of adjustment. Spring Pressure: One of the most unique features of the AAF Race Shifter is the centering spring mechanism. Unlike most shifters that use a typical steel spring, the AAF Race Shifter uses a polyurethane spring. This polyurethane spring absorbs shock and vibration load that a typical steel spring would magnify and resonate. This gives the AAF Race Shifter a connected feel to the transmission that is unmatched. It features two polyurethane springs. This allows the adjustment of the centering location of each spring independently which gets rid of any slack but also allows for preloading of the spring. AAF also offers multiple different spring rates of polyurethane which are preloaded in house. Mounting and Installation: AAF's Race Shifter is centered directly over the factory shifter hole. This allows it to be to be installed in many BMW applications. All other information and installation details available on AAF's website!
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39599356
Part#: TO-0264-SA
Ships in 7 Business Days
$ 294.99 USD
Free Shipping on orders $49 and up
Upgrade the look and feel of your A90 Supra with AutoTecknic Competition Shift Paddles, engineered for precision shifting and an unparalleled driving experience.
AUTOTECKNIC - Corporate Logo
T#:39599358
Part#: TO-0264-SG
Ships in 7 Business Days
$ 294.99 USD
Free Shipping on orders $49 and up
$ 294.99 USD
Free Shipping on orders $49 and up
Upgrade your A90 Supra with the AutoTecknic Competition Shift Paddles and enjoy the perfect blend of style, performance, and driving precision.
AUTOTECKNIC - Corporate Logo
T#:39599357
Part#: TO-0264-SB
Ships in 7 Business Days
$ 294.99 USD
Free Shipping on orders $49 and up
$ 294.99 USD
Free Shipping on orders $49 and up
Upgrade your A90 Supra with AutoTecknic Competition Shift Paddles finished in Stealth Black and experience the perfect blend of style, performance, and control.


Advanced Auto Fabrication - Corporate Logo
T#:52129730
Part#: E30ZFTSK55
Ships in 4 Business Days
New Item
$ 1,198.00 USD
Free Shipping on orders $49 and up
Upgrade your E30’s drivetrain with the AAF ZF Transmission Swap Kit, a turnkey solution for those demanding more reliability and smoother gear engagement.
IRP - Individual Racing Parts - Corporate Logo
T#:44461480
Part#: IRPSS-SC-3BB
Special Order: No Guaranteed ETA
$ 466.99 USD
Free Shipping on orders $49 and up
For BMW owners looking to elevate their driving experience, the IRP Short Shifter BMW V3 Self Centering - Black With Blue Button from Turner Motorsport is the ultimate choice, combining performance, style, and reliability in one premium package.
Show More Show Less
IRP - Individual Racing Parts - Corporate Logo
T#:587020
Part#: IRPDB-46MAL
Special Order: No Guaranteed ETA
$ 151.99 USD
Free Shipping
$ 151.99 USD
Free Shipping
These aluminum mounts are a direct replacement for the stock rubber bushings and have been lightened to remove excess weight. Using aluminum instead of rubber eliminates the "wind up" inherent in rubber mounts, and this deflection slows suspension & drivetrain response. The tradeoff is an increase in NVH. Features: Stiffens chassis/Improves stability Less wear of other components Better durability Provides better control of chassis geometry Replaces OE: 33172282484 Recommended for racing use only Includes: 2 rear aluminum bushing 1 front aluminum bushings
Show More Show Less