Find Parts That Fit Your Vehicle

BMW Performance Clutch Kits & Parts

These heavy-duty clutch kits use aluminum lightweight flywheels with sport clutch components to give your clutch the grip and clamping force it needs to cope with high torque upgrades. Our kits were developed through racing programs by companies affiliated with our own race team - JB Racing, Sachs Sport, OS Giken, and UUC Motorwerks. JB Racing is the leader in aluminum lightweight flywheel upgrades. They are direct replacements for the stock dual-mass flywheels with steel contact surfaces and computer balanced to 14,000 RPM. JB has partnered with Sachs to spec sport/HD clutch discs and pressure plates that work seamlessly with their aluminum flywheels. The result is a clutch/flywheel upgrade package that functions a lot like the original clutch combo with near-stock levels of effort and engangement but with a much higher torque capacity. Don't let the clutch be your weak link in a highly tuned car!

Sub-Categories

Sort By:

Genuine BMW - Corporate Logo
T#:22686
Part#: 23111224845
In Stock
$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping

Replace this tube whenever the bearing or clutch kit is replaced.


Genuine BMW Guide Tube
This item fits the following BMW Chassis:
E36 M3,E34,E36,E39,E46,E53 X5
 

 

Show More Show Less
Genuine BMW - Corporate Logo
T#:49238
Part#: 21526785964
In Stock
3% off MSRP $ 113.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 109.99 USD
Free Shipping
3% off MSRP
$ 113.92

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 109.99 USD
Free Shipping
On vehicles that have hydraulic clutches, the slave cylinder transmits pedal movements to the clutch pack. The hydraulic aspect of this system makes clutch engagement much more comfortable. Like any hydraulic system though, the corrosive brake fluid can wear out seals and cause leaking and failure. If this is the case on your car, the best solution for repair is replacing the defective part.
Show More Show Less
Genuine BMW - Corporate Logo
T#:48901
Part#: 21207603248
In Stock
34% off MSRP $ 772.37

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 509.99 USD
Free Shipping
34% off MSRP
$ 772.37

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 509.99 USD
Free Shipping

This Genuine BMW OE replacement clutch kit from BMW comes stock for the 335is, 550i, and 650i. A lot of our customers install this as an upgrade for the 135i 335i and 535i!

Includes:

  • Clutch friction disc
  • Throwout/release bearing
  • Clutch fork lever
  • Pressure plate
  • Pressure plate bolts

 
Genuine BMW Clutch Kit for your 6 Speed Manual Transmission vehicle - 
This item fits the following BMW Chassis:
E92,E93,F10,F12,F13

 

Show More Show Less

Clutch Kit - E30 325i/is 1987-1991, E34 525i 1989-1990
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Sachs - Corporate Logo
T#:1665
Part#: 21211223102
In Stock
$ 261.99 USD
Free Shipping
$ 261.99 USD
Free Shipping
Kit includes Clutch Disc, Pressure Plate, and T/O Bearing. Call for applications not listed above. SACHS is the OEM supplier for BMW.

This item fits the following BMWs:
1987-1991 E30 BMW 325i 325ic 325is
1989-1990 E34 BMW 525i
Show More Show Less

Genuine BMW - Corporate Logo
T#:367982
Part#: 21511223582
In Stock
8% off MSRP $ 109.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 100.99 USD
Free Shipping
8% off MSRP
$ 109.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 100.99 USD
Free Shipping

Ensure smooth clutch operation in your BMW with the Turner Motorsport Genuine BMW Clutch Release/Throw-out Bearing. This crucial component, situated between the clutch pressure plate and release fork lever, is essential for optimal performance. When renewing your clutch, don't overlook the importance of replacing this genuine BMW bearing.

Key Benefits:

  • Genuine BMW quality guarantees a perfect fit.
  • Prevents clutch-related issues for reliable performance.

Upgrade your BMW's clutch system with the Turner Motorsport Genuine BMW Clutch Release/Throw-out Bearing.

Show More Show Less
JB Racing - Corporate Logo
T#:3771
Part#: 520-010-240
Ships in 10 Business Days
$ 602.00 USD
Free Shipping
$ 602.00 USD
Free Shipping
As Used on Project E36 M3
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.5lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1995-1999 E36 BMW M3
1998-2002 Z3 BMW Z3 M Roadster M Coupe
Show More Show Less

Sachs - Corporate Logo
T#:374821
Part#: 21212226428
In Stock
$ 336.99 USD
Free Shipping
$ 336.99 USD
Free Shipping
240mm clutch kit
Genuine BMW - Corporate Logo
T#:49734
Part#: 23017838938
In Stock
2% off MSRP $ 603.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 592.99 USD
Free Shipping
2% off MSRP
$ 603.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 592.99 USD
Free Shipping
This is a Genuine BMW clutch slave cylinder for E60 M5 and E63 MN6 with the SMG II GS7S47BG transmission. The slave draws fluid from the brake reservoir and applies it to the clutch fork/throw-out bearing. A bad slave cylinder could leave you stranded.

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 BMW M6
Show More Show Less

OEM LUK Clutch Kit - E39 M5, E52 Z8
We Price Match - Give Us A Call or Chat!
LUK - Corporate Logo
T#:1627
Part#: 21217515146
In Stock
$ 615.99

This product was last offered at the strikethrough price on
03-05-2026

$ 419.99 USD
Free Shipping
$ 419.99 USD
Free Shipping
The clutch on the E39 M5 V8 is designed to take a lot of abuse but be user-friendly at the same time. However, this means that it can wear "qucikly" when the car is driven hard. When treated with consideration there's no reason why the stock OEM clutch can't last 75k-100k miles. This is the direct replacement clutch kit for the 2000, 2001, 2002, and 2003 M5 and Z8. The kit comes complete with clutch disc, pressure plate, and throw-out bearing. This is the best choice when you want to maintain a reliable and efficient clutch system without the need for a different flywheel, additional parts, or awkward clutch engagement. This is the OEM clutch kit, manufactured by Luk.
Show More Show Less

HD/Perf Street Sprung
Must be used with ACT Flywheel 601010 or 601015
ACT - Corporate Logo
T#:567299
Part#: BM9-HDSS
In Stock
$ 897.00 USD
Free Shipping
$ 897.00 USD
Free Shipping
This kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability.
Show More Show Less
OEM LuK Twin Mass Flywheel -- E39 M5 S62
We Price Match - Give Us A Call or Chat!
LUK - Corporate Logo
T#:13220
Part#: 21212229190
In Stock
$ 709.99 USD
Free Shipping
$ 709.99 USD
Free Shipping

This is an OEM LuK stock twin mass flywheel for E39 M5 with the S62 engine. When your clutch starts to experience engagement chatter because of hot spots and wear, replacing it with this OEM dual mass flywheel will restore your vehicles driveability and have you clutch shifting smoothly again. OEM replacement for BMW part # 21212229190.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
JB Racing - Corporate Logo
T#:3769
Part#: 520-040-215
Back Ordered
11% off MSRP $ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD
Free Shipping
11% off MSRP
$ 765.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 27.0lbs
JB Flywheel Weight = 9.0lbs

This item fits the following BMWs:
1989-1992 E30 BMW 318i 318is 318ic
1992-1997 E36 BMW 318i 318is 318ti 318ic
1996-1997 Z3 BMW Z3 1.9
Show More Show Less


JB Racing - Corporate Logo
T#:2801
Part#: 520-200-240
In Stock
$ 714.00 USD
Free Shipping
$ 714.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

Stock Flywheel Weight = 24-31.0lbs
JB Flywheel Weight = 12.0lbs

This item fits the following BMWs:
2006-2010 E60 BMW - 525i, 528i, 530i
2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
2007-2013 E82 BMW - 125i, 128i
2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
2009-later E89 BMW - Z4 3.0i
Show More Show Less
Genuine BMW - Corporate Logo
T#:16213
Part#: 61319122700
In Stock
$ 99.67 USD
Free Shipping
$ 99.67 USD
Free Shipping

If your clutch switch is bad, it will prevent the car from starting and seem similar to a bad starter, you will turn the key and nothing will happen. Replace yours to start your vehicle again.


Genuine BMW Module, Clutch Switch
This item fits the following BMW Chassis:
E39 M5,E46 M3,E85 Z4M,E39,E46,E85 Z4,E86 Z4
 

 

Show More Show Less
JB Racing - Corporate Logo
T#:302739
Part#: 520-180-240
Ships in 9 Business Days
$ 602.00 USD
Free Shipping
$ 602.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
2001-2006  E46 BMW  M3 (6-speed manual only, not for SMG)
Show More Show Less

OEM LuK Clutch Kit - E30, E36 318i/is, Z3 1.9 with AC
We Price Match - Give Us A Call or Chat!
LUK - Corporate Logo
T#:4182
Part#: 21211223571
Ships in 1-2 days
$ 324.99

This product was last offered at the strikethrough price on
05-07-2026

$ 315.99 USD
Free Shipping
$ 315.99 USD
Free Shipping

OEM LuK Clutch Kit includes Clutch Disc, Pressure Plate, and T/O Bearing. Call for applications not listed above. SACHS is the OEM supplier for BMW. This kit fits all 1990-1999 4 cylinder BMW's (which all have the M42 or M44 engine). Only for cars with Air Conditioning.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ti 318ic
1997-1998 Z3 BMW Z3 1.9

Show More Show Less

Genuine BMW - Corporate Logo
T#:49244
Part#: 21526795713
Ships in 3 Business Days
4% off MSRP $ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 108.99 USD
Free Shipping
4% off MSRP
$ 113.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 108.99 USD
Free Shipping


Genuine BMW Output Cylinder Clutch - D=22,20Mm
This item fits the following BMW Chassis:
F22,F30,F32,F33,F36,F80 M3,F82 M4,F83

Genuine BMW - Corporate Logo
T#:19645
Part#: 21512226729
Ships in 3 Business Days
6% off MSRP $ 116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 109.99 USD
Free Shipping
6% off MSRP
$ 116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 109.99 USD
Free Shipping


Genuine BMW Clutch Release Bearing - H=25mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E30,E34,E36


Genuine BMW - Corporate Logo
T#:367993
Part#: 21526773670
In Stock
9% off MSRP $ 233.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 213.99 USD
Free Shipping
9% off MSRP
$ 233.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 213.99 USD
Free Shipping
A leaking master cylinder often feels like a failing clutch or a problematic transmission
Genuine BMW - Corporate Logo
T#:367994
Part#: 21526775924
In Stock
7% off MSRP $ 190.39

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 177.99 USD
Limited Qty Sale
Free Shipping
7% off MSRP
$ 190.39

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 177.99 USD
Limited Qty Sale
Free Shipping

OEM LuK Clutch Kit - 5 Speed -- E46 E39 Z3 Z4
We Price Match - Give Us A Call or Chat!
LUK - Corporate Logo
T#:374092
Part#: 21217523620
In Stock
$ 218.99 USD
Free Shipping
$ 218.99 USD
Free Shipping

OEM LuK Clutch Kit includes Clutch Disc, Pressure Plate, and T/O Bearing. Call for applications not listed above. SACHS is the OEM supplier for BMW. 

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

JB Racing - Corporate Logo
T#:4227
Part#: 520-140-240
In Stock
$ 602.00 USD
Free Shipping
$ 602.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch). In addition to the standard replacement clutches, we also sell Sachs Performance sprung hub clutches that also work with the JB flywheels.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.0lbs

This item fits the following BMWs:
1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (with 5-speed manual transmission)
2001-2005 E46 BMW 325xi 330xi
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
Show More Show Less
OEM LuK Clutch Kit -- E9X BMW
We Price Match - Give Us A Call or Chat!
LUK - Corporate Logo
T#:384292
Part#: 21212284034
In Stock
$ 571.99 USD
Free Shipping
$ 571.99 USD
Free Shipping

OEM LuK clutch kit made to replace BMW part number 21212284034. Replace your slipping clutch with a brand new kit to restore your vehicles drive-ability.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
OEM LuK Clutch Twin Mass Flywheel -- E46 E39 E53 Z3
We Price Match - Give Us A Call or Chat!
LUK - Corporate Logo
T#:12683
Part#: 21217512474
Ships in 1-2 days
$ 801.63

This product was last offered at the strikethrough price on
08-12-2026

$ 605.99 USD
Free Shipping
$ 605.99 USD
Free Shipping

This is an OEM LuK stock twin mass flywheel. When your clutch starts to experience engagement chatter because of hot spots and wear, replacing it with this OEM dual mass flywheel will restore your vehicles driveability and have you clutch shifting smoothly again. OEM replacement for BMW part # 21217512474, 21217509078, and 21207508456.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less


JB Racing - Corporate Logo
T#:3768
Part#: 520-050-228
Ships in 5 Business Days
$ 630.00 USD
Free Shipping
$ 630.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB flywheel includes ignition trigger wheel.

Stock Flywheel Weight = 19.5lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1987-1991 E30 BMW M3
Show More Show Less
JB Racing - Corporate Logo
T#:3474
Part#: 520-190-240
Ships in 3 Business Days
$ 672.00 USD
Free Shipping
$ 672.00 USD
Free Shipping
This is a performance replacement for BMW Part # 21207533868 Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB Flywheel includes the pilot bearing mounted in the flywheel hub, just like the factory configuration.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.5lbs

This item fits the following BMWs:
2002-2005 E46 BMW 325i 330i (with 6-speed manual transmission)
Show More Show Less
JB Racing - Corporate Logo
T#:385699
Part#: 520-060-228
Ships on Aug 31, 2026
$ 581.00 USD
Free Shipping
$ 581.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325i up to 12/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 18.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1984-1991  E30 BMW  325i 325ic 325is (with single-mass flywheel)
1989-1990  E34 BMW  525i (with single-mass flywheel)
Show More Show Less

Genuine MINI - Corporate Logo
T#:49039
Part#: 21517570228
In Stock
8% off MSRP $ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Free Shipping
8% off MSRP
$ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Free Shipping
Genuine MINI CLUTCH RELEASE BEARING

JB Racing - Corporate Logo
T#:3772
Part#: 520-090-240
Ships in 10 Business Days
$ 581.00 USD
Free Shipping
$ 581.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable.

Stock Flywheel Weight = 16.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1991-1995 E34 BMW M5
Show More Show Less
JB Racing - Corporate Logo
T#:3647
Part#: 520-110-215
Ships in 3 Business Days
$ 581.00 USD
Free Shipping
$ 581.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can be rebuilt too with a new clutch contact surface.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 16.5lbs
JB Flywheel Weight = 8lbs

This item fits the following BMWs:
1974-1976 2002 BMW 2002
1977-1983 E21 BMW 320i
1984-1985 E30 BMW 318i
Show More Show Less

Genuine BMW - Corporate Logo
T#:12563
Part#: 21517521471
In Stock
4% off MSRP $ 110.53

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 106.39 USD
Free Shipping
4% off MSRP
$ 110.53

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 106.39 USD
Free Shipping


Genuine BMW Clutch Release Bearing -
This item fits the following BMW Chassis:
E30,E34,E36,E39,E46,E53 X5,E85

Genuine BMW - Corporate Logo
T#:49868
Part#: 23117531354
Ships in 3 Business Days
2% off MSRP $ 84.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 82.99 USD
Free Shipping
2% off MSRP
$ 84.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 82.99 USD
Free Shipping


Genuine BMW Guide Tube
This item fits the following BMW Chassis:
E85 Z4M,E46,E53 X5,E83 X3,E85 Z4,E86 Z4,E90,E92


OEM LuK Dual Mass Flywheel -- BMW N55
We Price Match - Give Us A Call or Chat!
LUK - Corporate Logo
T#:388428
Part#: 21207640733
In Stock
$ 1,239.99 USD
Free Shipping
$ 1,239.99 USD
Free Shipping

This is an OEM LuK stock dual mass flywheel. When your clutch starts to experience engagement chatter because of hot spots and wear, replacing it with this OEM dual mass flywheel will restore your vehicles driveability and have you clutch shifting smoothly again. OEM replacement for BMW part # 21207640733 and 21207598460.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Clutch Kit - SMG Transmission
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Sachs - Corporate Logo
T#:374524
Part#: 21212283089
In Stock
$ 989.99 USD
Free Shipping
$ 989.99 USD
Free Shipping
Clutch kit contains a clutch friction disc, pressure plate, and release (throw out) bearing. Inspect your flywheel for wear and damage prior to reinstallation. High mileage flywheels warrant replacement due to possibly of failure in dual-mass components. For vehicles with SMG transmission only.
Show More Show Less
OEM LuK Clutch Kit -- E30 E34
We Price Match - Give Us A Call or Chat!
LUK - Corporate Logo
T#:393577
Part#: 21211223102
Ships in 4 Business Days
$ 265.99 USD
Free Shipping
$ 265.99 USD
Free Shipping

OEM LuK Clutch Kit includes Clutch Disc, Pressure Plate, and T/O Bearing. Call for applications not listed above. SACHS is the OEM supplier for BMW. 

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
LUK - Corporate Logo
T#:585944
Part#: 21208631999
In Stock
$ 454.99 USD
Free Shipping
$ 454.99 USD
Free Shipping
Clutch kit includes clutch disc, pressure plate, fork, release bearing, and bolts.


LUK Clutch Kit - E46
We Price Match - Give Us A Call or Chat!
LUK - Corporate Logo
T#:376242
Part#: 21212282393
In Stock
$ 462.99 USD
Free Shipping
$ 462.99 USD
Free Shipping
E46 M3 LUK OEM Clutch Kit. Disc, Pressure Plate and Throw-out bearing. Fits manual gearbox and SMG.
Genuine BMW - Corporate Logo
T#:20446
Part#: 83300493749
In Stock
$ 224.99 USD
Free Shipping
$ 224.99 USD
Free Shipping
Genuine BMW AUXILIARY MATERIALS, FLUIDS / COLORSYSTEM TEMPLATE
JB Racing - Corporate Logo
T#:1339
Part#: 520-150-240
In Stock
$ 903.00 USD
Free Shipping
$ 903.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 33.0lbs
JB Flywheel Weight = 13.0lbs

This item fits the following BMWs:
1997-2003 E39 BMW 540i
Show More Show Less

ACT - Corporate Logo
T#:567293
Part#: BM9-XTSS
In Stock at Vendor
$ 949.00 USD
Free Shipping
$ 949.00 USD
Free Shipping
### **BM9-XTSS Clutch Kit – Engineered for Peak Performance** The **BM9-XTSS Clutch Kit** is designed for enthusiasts who demand maximum performance and durability. Featuring an **ACT Xtreme pressure plate**, this kit delivers **higher clamp load, reduced deflection, and extended clutch life**—ideal for spirited street driving and track use. Each diaphragm undergoes a **four-stage heat-treatment process**, ensuring superior strength and longevity. **Precision cover stampings** enhance rigidity, providing a significant upgrade over stock components. Paired with **ACT’s Performance Street Disc**, this kit utilizes **steel-backed organic friction material** with **high copper content** for **better heat dissipation and burst strength**. Its **reduced marcel design** allows for **quicker, smoother shifts**, perfectly complementing the Xtreme pressure plate. Expect **quiet operation, enhanced durability, and long-term reliability**, making it a top choice for performance-driven drivers. ### **Key Features:** - **Pedal Feel:** Moderate to heavy effort, smooth engagement, and minimal gear rattle. - **Extended Lifespan:** ACT’s exclusive diaphragm design ensures longer-lasting friction material. - **Precision Engineering:** Optimized for **heat resistance, fade reduction, and maximum durability**. Upgrade your drivetrain with confidence—the **ACT BM9-XTSS Clutch Kit** is built to handle the pressure. 🚗💨
Show More Show Less

Clutch Kit - E36 328i / 328is, E39 528i 1997, Z3 2.8 97-98
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Sachs - Corporate Logo
T#:4185
Part#: 21211223602
In Stock at Vendor
$ 364.99

This product was last offered at the strikethrough price on
03-05-2026

$ 333.99 USD
Free Shipping
$ 333.99 USD
Free Shipping
This OEM Sachs clutch kit includes the clutch disc, pressure plate and throw out bearing.

This item fits the following BMWs:
1992-1998 E36 BMW 328i 328is 328ic
1997 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
Show More Show Less
LUK Clutch Kit - 5 Speed Transmission - E46, E60, Z4
We Price Match - Give Us A Call or Chat!
LUK - Corporate Logo
T#:371549
Part#: 21207551576
In Stock at Vendor
$ 344.77 USD
Free Shipping
$ 344.77 USD
Free Shipping
Does not include pressure plate bolts

JB Racing - Corporate Logo
T#:3770
Part#: 520-080-240
Ships in 9 Business Days
$ 630.00 USD
Free Shipping
$ 630.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

Stock Flywheel Weight = 22.0lbs
JB Flywheel Weight = 8.5lbs

This flywheel includes the ignition trigger wheel.

This item fits the following BMWs:
1982-1987 E23 BMW 733i 735i
1982-1989 E24 BMW 633csi 635csi M6
1985-1988 E28 BMW 535i 535is M5
Show More Show Less
Sachs Clutch Kit - E36 M3 95
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Sachs - Corporate Logo
T#:3777
Part#: 21212227536
In Stock at Vendor
$ 573.80

This product was last offered at the strikethrough price on
04-09-2026

$ 511.23 USD
Free Shipping
$ 511.23 USD
Free Shipping
The best clutch that we have found for your 1995 M3 is the same as what's in your car. Manufactured in Germany and includes a clutch disc, pressure plate, and throw-out bearing.

Optional items:
Exhaust Gaskets & Hardware:
  • 18301716888 - exhaust gasket x 2
  • 18301737774 - nuts x 6
    Transmission Seals:
  • 23121282394 - shift shaft seal
  • 23111224799 - output seal
  • 23211224820 - input seal
    Additional Clutch Parts:
  • 21511223328 - clutch pivot pin
  • 11211720310 - pilot bearing
  • 07119906045 - pressure plate bolts x 6

    This item fits the following BMWs:
    1995 E36 BMW M3 with S50 engine
  • Show More Show Less

    ACT - Corporate Logo
    T#:567303
    Part#: 601010
    In Stock at Vendor
    $ 748.00 USD
    Free Shipping
    $ 748.00 USD
    Free Shipping
    This Streetlite flywheel is considerably lighter than stock and is the most durable flywheel offering from ACT. This is preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts. Noticeably improved engine response and acceleration, OE to mild gear rattle LifeHeat-treated forging for strength and toughness, induction-hardened ring gears for maximum life One-piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears CNC machined and dynamically computer balanced for smooth high RPM reliability
    Show More Show Less

    Genuine BMW - Corporate Logo
    T#:12267
    Part#: 21526785966
    Ships in 3 Business Days
    6% off MSRP $ 223.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 210.99 USD
    Free Shipping
    6% off MSRP
    $ 223.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 210.99 USD
    Free Shipping
    GENUINE BMW OUTPUT CYLINDER,CLUTCH:211042

    We sell an aftermarket version of this part for considerable less # 21526766279
     
    Show More Show Less
    Genuine BMW - Corporate Logo
    T#:1482
    Part#: 11517838118
    In Stock
    6% off MSRP $ 632.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 595.99 USD
    Free Shipping
    6% off MSRP
    $ 632.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 595.99 USD
    Free Shipping
    The E46 M3 does not suffer from the cooling nightmares of the previous E36 models. The original water pump uses a composite impeller, not plastic or metal, so the BMW pump will typically last 85,000+ miles before the bearings show signs of wear (the composite impeller is not the reason for preventative maintenance - it's the bearings). We prefer the OE BMW pump to the aftermarket brands because it uses the composite impeller, it has a proven reliability record, and the pricing represents a solid value upgrade. The pump is located on the front of the engine with the fan attached to it. The complexity of the S54 engine means the water pump has multiple gaskets and seals that should also be replaced. And if the thermostat has not been changed then this is the best time for a new one as well.

    Composite vs Metal
    BMW designed this water pump to use a composite impeller. It is much stronger than the plastic pieces that were so problematic in the mid-90s. The aftermarket solution to the plastic issues was to use a metal impeller. This solved the impeller issues but created some others. The metal impeller is heavier than composite or plastic and that led to quicker bearing failure on the E36 pump (sometimes within a year). The possibility exists that the same premature bearing failure can happen on the E46 M3 metal impeller pumps as well. The heavier weight also has the drawback of using more horsepower since it requires more effort to move the heavier piece. The composite materials solve all of these issues - light weight, strong, long lasting, and relatively inexpensive. They also come with a two-year warranty (most aftermarket pumps are one year). Original BMW water pumps for the E36 (and most other modern BMWs) now use a composite impeller so any issues with factory pumps are long gone. Original BMW water pumps for the E46 M3 are known to last over 100,000 miles and the composite is still in excellent condition (failure is usually typical leaks from worn bearings). For preventative maintenance we recommend a replacement around 85,000 miles. Alternate part numbers: 11517838118, 11517838159.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3
    Show More Show Less
    Genuine BMW - Corporate Logo
    T#:5362914
    Part#: 21219505034
    Ships in 3 Business Days
    15% off MSRP $ 1,433.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,220.99 USD
    Free Shipping
    15% off MSRP
    $ 1,433.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,220.99 USD
    Free Shipping
    This Genuine BMW replacement clutch kit includes a clutch disc, pressure plate, fork, release bearing, and bolts. No core charge


    Genuine BMW - Corporate Logo
    T#:174558
    Part#: 21521157212
    Ships in 3 Business Days
    6% off MSRP $ 242.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 228.99 USD
    Free Shipping
    6% off MSRP
    $ 242.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 228.99 USD
    Free Shipping


    Genuine BMW Output Cylinder Clutch - D=20,64mm
    This item fits the following BMW Chassis:
    E30 M3,E30

    Genuine BMW - Corporate Logo
    T#:367991
    Part#: 21526758829
    Ships in 3 Business Days
    6% off MSRP $ 257.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 242.99 USD
    Free Shipping
    6% off MSRP
    $ 257.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 242.99 USD
    Free Shipping