BMW Performance Clutch Kits & Parts

Turner Motorsport Lightweight N54 Flywheel & Upgraded Clutch Kit

Unlock the full potential of your N54-powered BMW with our performance-driven clutch and flywheel kit. Designed to enhance daily drivability while delivering increased power handling and improved throttle response, this kit is the ultimate upgrade for enthusiasts seeking more from their vehicle.

Why Choose This Kit?
This setup features the Turner Lightweight N54 Flywheel, precision-engineered for quicker acceleration, faster rev-matching, and a more responsive driving experience. Paired with an upgraded OE clutch from the high-performance 335is and F10 550i(V8 Bi-Turbo), this combo is capable of handling over 500 ft-lbs of torque while maintaining smooth, factory-like engagement and durability.

The factory dual-mass flywheel may prioritize smoothness and efficiency, but it comes at the cost of responsiveness and is prone to failure in high-performance applications. The Turner Lightweight Flywheel solves these issues with a single-mass design that strikes the perfect balance between comfort, performance, and reliability making it ideal for both daily driving and spirited track use.

Kit Contents:

Turner Lightweight N54 Single-Mass Flywheel (18.6 lbs, 10 lbs lighter than stock)
Upgraded OE Clutch – Supports 500 ft-lbs+
OE Clutch Fork - P# 21517564027
OE Throwout Bearing
Clutch Alignment Tool - P# 056212LA01A
Brass Clutch Fork Pivot Pin - P# 21511223328
OE Flywheel Bolts - P# 11227520706
OE Pressure Plate Screws - P# 21207548052
Pivot Pin Retaining Spring - P# 21517570284
Transmission Mating Dowels - P# 11117524470
Flywheel Features:

Precision-machined 4140 HT heat-treated chromoly steel for durability
Black oxide coating to resist corrosion
8620 steel pilot bearing pin for maximum wear resistance
Precision balanced to exceed OEM standards
Optimized step height for longer clutch life and consistent performance
Clutch:

Upgrade for 135i/335i/535i models from the 335is! Featuring a heavy-duty clutch with more holding power and a stock-like pedal feel. Excellent solution for If your clutch is slipping, or the engagement isn't what it used to be, it's time for a replacement. Slipping clutches won't allow your BMW to accelerate properly and can pose problems under a load such as going up large inclines. Also, a worn clutch can cause less precise and engaging shifts. By replacing your clutch you will restore performance and driving pleasure.

This clutch is an excellent upgrade for non 335is/550i/650i models. It features a more heavy-duty clutch disc and more holding power with stock-like pedal effort.

Transform your driving experience with this Turner Motorsport clutch and flywheel kit - engineered for power, performance, and everyday reliability.

A lightweight aluminum flywheel is a great way to increase throttle response and free up horsepower by reducing drivetrain loss. Factory flywheels are built to minimize engine and transmission vibrations, making them heavier and requiring more energy to make them spin. An aluminum flywheel can save lots of weight over the stock steel unit - sometimes over 50%. While the dampening effect of the stock flywheel is reduced, most enthusiasts would agree that the increase in performance is well worth it. In addition, the lighter flywheel allows the engine to spin more freely, improving throttle response.

This JB Racing lightweight aluminum flywheel kit and is designed to be used with the included factory clutch, making replacement and service easy and inexpensive, especially compared to specialized racing clutches. It also preserves the driveability of your car on the street, and enthusiasts tolerant of a mild to moderate NVH increase will be especially taken with this setup. In addition, the JB Racing flywheel can be easily rebuilt with a new clutch contact surface, allowing you to enjoy faster revs and superior response for many years to come.

Stock Flywheel Weight: 24-31 lbs.

JB Racing Lightweight Aluminum Flywheel: 12 lbs.

This item fits the following BMW Chassis:
E61/1, E82/88, E9x, Z4

Fits the follow engines:
N52 3.0L

Looking to eliminate your dual-mass flywheel? Overwhelmed with all the options, but hearing complaints about so many of them with rattling or chatter from them? Problem solved. Introducing the all-new Lightweight Performance Flywheel from ECS Tuning. Engineered in-house with the enthusiast daily driver in mind, this is the perfect option for those wanting a lightweight flywheel without the annoying chatter heard from so many other options on the market. Designed to accommodate all conditions: from Sunday drives through the country, to the abuse of the track. No matter your driving style or ability, this is the flywheel and clutch kit for you.

Key Features:

Eliminates factory dual-mass flywheel for:
Crisper shifts
Improved throttle response
Improved acceleration (We measured a .4s decrease in 0-60 times on an otherwise-stock E36 328i!)
Lower replacement cost
Hardened 4140 Chromoly Steel for excellent engagement feel and wear resistance; zinc plated for corrosion resistance
Designed for use with any E34 M5 pressure plate and clutch for OE-type clutch feel
Sprung-hub clutch disc to eliminate chatter at idle and reduce driveline shock loading
Weighs in at just 16.5lbs!
SFI tested and certified to ensure safe operation under all conditions
Includes ECS performance flywheel, clutch kit with throwout bearing, pilot bearing and all flywheel and pressure plate hardware
Why is SFI testing and certification important?

The SFI Foundation, Inc. (SFI) is a non-profit organization established to issue and administer standards for the quality assurance of specialty performance and racing equipment. SFI certification indicates a flywheel has been certified using industry-standard SFI Spec 1.1 standards by an independent testing body to ensure quality of both design and materials for flywheels utilized in competitive motorsports.

Having successfully passed SFI certification, this flywheel has an individual SFI serial number found in a laser etching, and on an affixed sticker. This certification means the ECS-engineered flywheel is safe and reliable during the rigors of competitive racing; it's also safe and reliable for years and years of street use.

Lightweight flywheels have proven themselves to be a worthwhile performance enhancement. But with the quicker throttle response and horsepower improvement comes one serious drawback: flywheel chatter. Without the dual-mass flywheel's rubber isolators, a lightweight aluminum flywheel has more rattle than stock. ECS has designed this flywheel using chrom-moly steel and it weighs almost ten pounds less than the stock DMF but not as extreme as full aluminum flywheels. The steel helps dampen vibration and noise so you get near-factory refinement and most of the benefits of a lightweight flywheel: quicker throttle response, better reliability, and more power to the wheels. Zero-balanced and SFI 1.1 certified (material and design has been independently burst tested to ensure quality and safety). This flywheel requires the E34 M5 sprung hub clutch kit. Choose below from the flywheel only or a complete kit.

Modern flywheels are built with additional components that are designed to dampen and minimize vibrations from the engine and transmission. Weight has increased and reliability has decreased. With additional weight more energy is required for it to move. A lightweight flywheel does away with the dual mass design and its additional mass so more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance. And with a single-mass flywheel the unreliable DMF design is eliminated.

Stock flywheel weight - 25.0lbs
ECS flywheel weight = 16.55lbs

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (5-speed)
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i (5-speed) 

From the factory, the E46 M3 featured a dual-mass flywheel and self-adjusting clutch kit. While this provided an easy, comfortable driving experience, it lacks the durability and performance features of an upgraded clutch and flywheel kit. ECS Tuning's all-new S54 performance clutch kit is designed to address these issues. Featuring a full-face clutch disc and heavy-duty pressure plate, this kit offers increased power-holding capability, exceptional pedal feel, and superior durability.

The factory dual-mass flywheel weighs 24.2 lbs. This heavyweight component favors dampened vibrations and smooth gear changes—not performance. The 16.5 lb. E34 M5 flywheel designed by ECS omits the bulky dual-mass design for a single-mass, chromoly steel flywheel. For the performance-minded enthusiast, this translates to quicker RPM changes, easier "heel-toe" downshifts, and improved acceleration.

Engineered in-house with the enthusiast in mind, this is the perfect option for those wanting a lightweight flywheel and performance clutch, without the heavy pedal feel commonly associated with aggressive clutch kits. The ECS S54 performance clutch and lightweight flywheel are designed to accommodate all conditions: from Sunday drives through the country to the abuse of the track. No matter your driving style or ability, this is the flywheel and clutch kit for you.

PART DESIGN

ECS S54 Performance Clutch Kit:

Compatible with any performance flywheel that is designed to accept an E34 M5 architecture clutch Sprung-hub clutch disc Includes ECS performance pressure plate, performance clutch disc, throwout bearing, pilot bearing, alignment tool, and all flywheel and pressure plate hardware ECS Single-Mass Lightweight Flywheel:

Eliminates the factory dual-mass flywheel for: Improved throttle response Improved acceleration Lower replacement cost Hardened 4140 Chromoly Steel for excellent engagement feel and wear resistance Zinc-plated for added corrosion resistance Weighs in at just 16.5 lbs! SFI tested and certified to ensure safe operation under all conditions Why is SFI testing and certification important?

The SFI Foundation, Inc. (SFI) is a non-profit organization established to issue and administer standards for the quality assurance of specialty performance and racing equipment. SFI certification indicates a flywheel has been certified using industry-standard SFI Spec 1.1 standards by an independent testing body to ensure the quality of both design and materials for flywheels utilized in competitive motorsports.

Having successfully passed SFI certification, this flywheel has an individual SFI serial number found in a laser etching, and on an affixed sticker. This certification means the ECS-engineered flywheel is safe and reliable during the rigors of competitive racing; it's also safe and reliable for years and years of street use.

PRODUCT DEVELOPMENT

This Performance Clutch Kit & Lightweight Flywheel was designed, engineered, tested, and quality inspected by the ECS Research and Development team. ECS Tuning strives for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing an in-house 3D printer, and rigorous long-term product testing.

The factory dual-mass flywheel in your MINI N14 was built with comfort in mind—absorbing drivetrain vibrations and smoothing shifts—but at the cost of performance. Weighing in at a hefty 28.3 lbs., the OEM flywheel adds excessive rotational mass, dulling throttle response, slowing acceleration, and complicating precise rev-matching. Worse yet, it's known to be unreliable in modified or tuned setups and expensive to replace when it fails.

This single-mass design from ECS Tuning weighs just 18.8 lbs. It cuts nearly 10 lbs. of rotational weight to significantly enhance throttle response, acceleration, and overall driving feel. Built for durability and spirited driving, it's the ultimate upgrade for enthusiasts who want to make the most of every gear change.

Key Features:

Precision CNC-machined from 4140 HT Chromoly Steel: Ensures outstanding toughness, consistent wear, and long-term durability.

Heat Treated and Tempered: Achieves HRC 28-32 for improved strength, stress relief, and dimensional stability—even at elevated temperatures.

Black Oxide Coated: Resists corrosion for long-lasting protection and a professional finish.

Precision Balanced: Exceeds OEM standards (G16, 175 g-mm) to ensure smooth, safe operation at all RPMs.

SFI 1.1 Certified: Tested and approved for extreme use—track or street.

Direct Fit for OE N14 Clutch Kits: Maintains compatibility with factory-style components for hassle-free installation.

Performance Benefits:

Substantial Weight Reduction

​OEM Flywheel: 28.3 lbs.

ECS Lightweight Flywheel: 18.8 lbs.

Net Savings: Nearly 10 lbs.

Faster Revving and Sharper Throttle Response: Reducing rotational mass translates into a more dynamic and responsive driving experience.

Improved Clutch Engagement and Longevity: Optimized step height delivers better clamp load and extends service life.

Ideal for Modified MINIs: Built to handle increased power and spirited driving with confidence.

Replaces MINI OEM Part #: 21207575069

When installing a new clutch, it is important to replace old hardware and common wear items. This ensures both a smooth and reliable installation. This also allows you to perform maintenance while everything is apart as opposed to a needing to make future repairs when everything is back together.

Included in this kit:

• Flywheel bolts
• Bolts bell housing, one time use!
• All hardware to re-mount the driveshaft
• Pilot Bearing
• Clutch fork pivot pin
• Clutch alignment tool
• Metal Guibo
• Center support bearing 

Fits the following BMWs:
E9X BMW 335i/is N54 N55

BMW E36 328i, Z3 2.8 JB Racing Lightweight Aluminum Flywheel offers a significant performance upgrade by replacing the heavy stock steel flywheel with a much lighter aluminum version. This JB Racing flywheel is designed to deliver faster acceleration, improved throttle response, and enhanced overall performance for your BMW.

The modern stock flywheels are burdened with additional components meant to dampen vibrations, which unfortunately adds unnecessary weight. The JB Racing aluminum flywheel, weighing just 10.0 lbs compared to the stock 25.0 lbs, eliminates this excess mass, allowing more power to reach the wheels and reducing the energy wasted on spinning the flywheel. Engine builders prioritize lightweight flywheels when optimizing race engines for maximum efficiency, and the difference is especially noticeable in how quickly the engine revs and reaches its power band.

This JB Racing lightweight flywheel is a direct replacement for the stock flywheel and is compatible with the factory BMW organic clutch. This compatibility ensures that you can use standard replacement clutches, making maintenance simple and cost-effective. The flywheel can also be resurfaced for a fresh contact surface, so there’s no need to buy a new one when it’s time to replace the clutch.

While single-mass aluminum flywheels like this one may result in slightly more noise and vibration compared to dual-mass designs, this can be managed with heavier transmission oil and sprung hub clutches, such as the Sachs Performance clutch available through Turner Motorsport.

• Faster acceleration: Reduces the rotational mass for quicker engine response.
• Improved throttle response: Engine revs more freely and builds RPM faster.
• Enhanced performance: More power delivered to the wheels for better driving dynamics.
• Cost-effective maintenance: Compatible with factory BMW organic clutches and can be resurfaced.
• Direct replacement: Easy upgrade with no modifications required.

Vehicle Compatibility:

• 1996-1999 E36 BMW 328i, 328is, 328ic
• 1997-1998 Z3 BMW Z3 2.8

BMW E60 E9X XACT Flywheel Streetlite is an advanced performance flywheel engineered to offer substantial improvements over stock components. This lightweight flywheel is designed for durability and enhanced performance, making it an excellent choice for both street driving and drag racing.

• Lightweight Construction: Significantly lighter than the stock flywheel, reducing rotational mass for improved engine response and acceleration.
• Durable Design: Crafted for maximum strength, lower inertia, and excellent heat tolerance, ensuring long-lasting performance.
• Versatile Use: Ideal for street or drag racing applications, providing reliable performance across various driving conditions.
• Serviceable: Can be resurfaced, eliminating the need for additional parts and extending the lifespan of the flywheel.
• Included Hardware: Comes with flywheel bolts (M12-1.5 X 30mm) for convenient installation.

Upgrade your BMW with the BMW E60 E9X XACT Flywheel Streetlite for enhanced performance and durability.

When installing a new clutch, it is important to replace old hardware and common wear items. This ensures both a smooth and reliable installation. This also allows you to perform maintenance while everything is apart as opposed to a needing to make future repairs when everything is back together.

Included in this kit:

• M3 upgraded transmission mounts with all mounting hardware
• Pilot bearing
• Giubo/universal flex disc with mounting hardware
• Driveshaft center mount
• Necessary gaskets and hardware for re-mounting the exhaust system
• Clutch fork lever and pivot pin
• All bellhousing bolts, and dowels
• Pressure plate screws, flywheel bolts
• Loctite 271 high strength thread locker for flywheel bolts

Fits the following BMWs:
E46 BMW  M54 325i/Ci, 330i/Ci (up to 03/2003)

600315 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.

Feel: Noticeably improved engine response and acceleration, OE to mild gear rattle;

Life: Heat-treated forging for strength and toughness, induction-hardened ring gears for maximum life;

Quality: One piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears;

Recommended Use: Recommended for street and race use;

ACT Difference: Forged, CNC machined and dynamically computer balanced for smooth high RPM reliability;

For use with ACT clutch kits only.

Advanced Clutch Technology (ACT) designs, engineers and develops products by leveraging decades of track and performance street experience. Advanced CAD, FEA simulation, and CAM tools help ensure highly optimized performance, reliability, and repeatability. These key advantages are produced by combining the best engineering and design methodologies with the latest in materials and manufacturing techniques.

ACT clutch kits stand unequaled in terms of consistent pedal feel, high torque capacity, long wear life and durability. In-house manufacturing is critical in tuning components specifically to each individual application while maintaining the predictable ACT pedal feel across the entire catalog.

This clutch kit is their most popular and features a Heavy Duty pressure plate and a Performance Street sprung clutch disc.

**Must be used with an ACT XACT Streetlite Flywheel, Part number: 600315**

The heavy duty pressure plate included offers a 20-50% clamp load increase, stock-moderate  pedal feel, and heat treated diaphragms for increased strength and performance.

Next in this kit is the Performance Street clutch disc. This is the most popular sprung clutch disc and features high quality organic friction material with a high copper content for improved heat transfer and a steel backed lining for increased strength in burst load circumstances. This organic clutch disc has a significantly higher torque capacity than a stock disc but still retains a long life span and operates quietly and reliably.

Clutch Kit Specifications:

• Part Number: BM2-HDSS
• Description: HD/Perf Street Sprung
• Torque Capacity (ft/lbs.): 270
• Torque Capacity Over OE: 20%
• Disc Type: Street Disc
• Spline Count: 14
• Spline Size (in.): 1
• Disc Diameter (in.): 8.4
• Disc Diameter (mm.): 214
• Pressure Plate Type: Heavy Duty
• Product Weight (lbs.): 11.1
• Kit Contents: 3000802, ATGM06, B012, RB131
• Warranty (Product Warranty): One (1) Year from Retail Purchase

Every design is thoroughly researched and tested prior to release to guarantee their products meet and exceed the customer's expectations. Careful attention is payed to factors such as engine torque, maximum RPM, drive type (FWD, RWD, AWD), and the type of driving being done, such as street, sport, track events, racing, etc. ACT's clutch kits are competitively priced, often with  specifications greater than competitor's and at a higher quality.

This clutch kit features a Xtreme pressure plate, an G6 racing clutch disc, and an XACT Streetlite Flywheel.

Their Xtreme pressure plate offers a 50-120% clamp load increase, moderate to heavy pedal feel, and is recommended for high performance street and racing applications. All diaphragms went through a four stage heating process for increased strength and unparalleled performance.

The G6 clutch disc is a sprung, 6-pad racing disc that is recommended for high horsepower street and race us and is better at handling high heat than the 4-pad disc. Its material composition is high quality, ceramic friction materials and a heavy duty torsional dampening springs that are rate for this clutch disc's size and expected uses. It has an increased torque capacity, and is better for faster shifting with its low weight and inertia. Being a racing disc, it has good durability and its ceramic composition allows for high heat tolerances. It also has a fast, aggressive engagement in comparison to standard street-use clutch discs.

The XACT Streetlite Flywheel is their most popular flywheel as it is great for both street and drag racing. It allows your engine to rev quicker, giving you increased throttle response, and is considerably lighter than your stock flywheel thanks to its light single-mass design, all while still being very durable!

Clutch Kit Specs:

• Torque Rating: 465 ft/lbs
• 52% torque capacity increase over stock!
• Type of Disc: Street
• 10-count spline
• Spline Size: 1-3/8" inch
• Flywheel Weight: 15.1 lbs
• 1 year Warranty from retail purchase date!

When installing a new clutch, it is important to replace old hardware and common wear items. This ensures both a smooth and reliable installation. This also allows you to perform maintenance while everything is apart as opposed to a needing to make future repairs when everything is back together. Included in this kit are all necessary clutch installation components and parts that should be replaced while easily accessible.

Fits the following BMWs:
E9X BMW 328i N52 3.0L