BMW Performance Clutch Kits & Parts

Turner Motorsport Lightweight N54 Flywheel & Upgraded Clutch Kit

Unlock the full potential of your N54-powered BMW with our performance-driven clutch and flywheel kit. Designed to enhance daily drivability while delivering increased power handling and improved throttle response, this kit is the ultimate upgrade for enthusiasts seeking more from their vehicle.

Why Choose This Kit?
This setup features the Turner Lightweight N54 Flywheel, precision-engineered for quicker acceleration, faster rev-matching, and a more responsive driving experience. Paired with an upgraded OE clutch from the high-performance 335is and F10 550i(V8 Bi-Turbo), this combo is capable of handling over 500 ft-lbs of torque while maintaining smooth, factory-like engagement and durability.

The factory dual-mass flywheel may prioritize smoothness and efficiency, but it comes at the cost of responsiveness and is prone to failure in high-performance applications. The Turner Lightweight Flywheel solves these issues with a single-mass design that strikes the perfect balance between comfort, performance, and reliability making it ideal for both daily driving and spirited track use.

Kit Contents:

Turner Lightweight N54 Single-Mass Flywheel (18.6 lbs, 10 lbs lighter than stock)
Upgraded OE Clutch – Supports 500 ft-lbs+
OE Clutch Fork - P# 21517564027
OE Throwout Bearing
Clutch Alignment Tool - P# 056212LA01A
Brass Clutch Fork Pivot Pin - P# 21511223328
OE Flywheel Bolts - P# 11227520706
OE Pressure Plate Screws - P# 21207548052
Pivot Pin Retaining Spring - P# 21517570284
Transmission Mating Dowels - P# 11117524470
Flywheel Features:

Precision-machined 4140 HT heat-treated chromoly steel for durability
Black oxide coating to resist corrosion
8620 steel pilot bearing pin for maximum wear resistance
Precision balanced to exceed OEM standards
Optimized step height for longer clutch life and consistent performance
Clutch:

Upgrade for 135i/335i/535i models from the 335is! Featuring a heavy-duty clutch with more holding power and a stock-like pedal feel. Excellent solution for If your clutch is slipping, or the engagement isn't what it used to be, it's time for a replacement. Slipping clutches won't allow your BMW to accelerate properly and can pose problems under a load such as going up large inclines. Also, a worn clutch can cause less precise and engaging shifts. By replacing your clutch you will restore performance and driving pleasure.

This clutch is an excellent upgrade for non 335is/550i/650i models. It features a more heavy-duty clutch disc and more holding power with stock-like pedal effort.

Transform your driving experience with this Turner Motorsport clutch and flywheel kit - engineered for power, performance, and everyday reliability.

Improved bearing from Sachs Performance that is designed for a performance oriented clutch system. Resists wear and damage from increased spring pressure and higher engagement RPM's.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

Performance equivalent of BMW part #'s:

• 1 207 275
• 1 208 423
• 1 223 168
• 1 223 366
• 1 225 203

When installing a new clutch, it is important to replace old hardware and common wear items. This ensures both a smooth and reliable installation. This also allows you to perform maintenance while everything is apart as opposed to a needing to make future repairs when everything is back together.

Included in this kit:

• Flywheel bolts
• Bolts bell housing, one time use!
• All hardware to re-mount the driveshaft
• Pilot Bearing
• Clutch fork pivot pin
• Clutch alignment tool
• Metal Guibo
• Center support bearing 

Fits the following BMWs:
E9X BMW 335i/is N54 N55

Looking to upgrade your clutch disc? This Sachs Performance clutch disc is a great option. Allowing for higher torque and horsepower, this disc is perfect for aggressive track applications such as endurance racing, clubsport, autocross, hill climbing and 1/4 mile racing.

Sachs Performance is the racing and performance oriented selection of high quality parts from Sachs and ZF Engineering. Supplying countless brands with OE parts and offering one of the widest selection of OEM replacement parts, they are known for their exceptionally high quality products. You can purchase these performance parts with confidence, knowing they will resist heavy wear and tear for much longer than most other aftermarket options.

600315 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.

Feel: Noticeably improved engine response and acceleration, OE to mild gear rattle;

Life: Heat-treated forging for strength and toughness, induction-hardened ring gears for maximum life;

Quality: One piece construction allows less opportunity for failure and provides uniform efficient heat transfer from the clutch disc. No more warped inserts or loose ring gears;

Recommended Use: Recommended for street and race use;

ACT Difference: Forged, CNC machined and dynamically computer balanced for smooth high RPM reliability;

For use with ACT clutch kits only.

When installing a new clutch, it is important to replace old hardware and common wear items. This ensures both a smooth and reliable installation. This also allows you to perform maintenance while everything is apart as opposed to a needing to make future repairs when everything is back together.

Included in this kit:

• M3 upgraded transmission mounts with all mounting hardware
• Pilot bearing
• Giubo/universal flex disc with mounting hardware
• Driveshaft center mount
• Necessary gaskets and hardware for re-mounting the exhaust system
• Clutch fork lever and pivot pin
• All bellhousing bolts, and dowels
• Pressure plate screws, flywheel bolts
• Loctite 271 high strength thread locker for flywheel bolts

Fits the following BMWs:
E46 BMW  M54 325i/Ci, 330i/Ci (up to 03/2003)

BMW E39 M62 4.4L 9" Twin Disc Clutch Kit - Solid Organic Discs is designed for those seeking exceptional performance in high-torque and high-heat environments. Manufactured by Turner Motorsport, this clutch kit is engineered to meet the demands of high horsepower motorsport applications.

• High Torque Capacity: Capable of handling up to 890 ft-lbs of torque, ideal for high-performance and track use.
• Solid Organic Discs: Features solid organic friction discs for improved heat management and durability.
• Enhanced Performance: Utilizes advanced pressure plate design and friction material composition for optimal drivability and performance.
• Positive Pedal Feel: Carefully designed pivot point and diaphragm ensure a responsive and comfortable pedal feel.
• Complete Kit: Includes everything needed for installation: a single mass flywheel, two solid organic clutch discs, a pressure plate assembly, flywheel bolts, pressure plate bolts, pilot bearing, release bearing, and clutch spline grease.

Advanced Clutch Technology (ACT) designs, engineers and develops products by leveraging decades of track and performance street experience. Advanced CAD, FEA simulation, and CAM tools help ensure highly optimized performance, reliability, and repeatability. These key advantages are produced by combining the best engineering and design methodologies with the latest in materials and manufacturing techniques.

ACT clutch kits stand unequaled in terms of consistent pedal feel, high torque capacity, long wear life and durability. In-house manufacturing is critical in tuning components specifically to each individual application while maintaining the predictable ACT pedal feel across the entire catalog.

This clutch kit is their most popular and features a Heavy Duty pressure plate and a Performance Street sprung clutch disc.

**Must be used with an ACT XACT Streetlite Flywheel, Part number: 600315**

The heavy duty pressure plate included offers a 20-50% clamp load increase, stock-moderate  pedal feel, and heat treated diaphragms for increased strength and performance.

Next in this kit is the Performance Street clutch disc. This is the most popular sprung clutch disc and features high quality organic friction material with a high copper content for improved heat transfer and a steel backed lining for increased strength in burst load circumstances. This organic clutch disc has a significantly higher torque capacity than a stock disc but still retains a long life span and operates quietly and reliably.

Clutch Kit Specifications:

• Part Number: BM2-HDSS
• Description: HD/Perf Street Sprung
• Torque Capacity (ft/lbs.): 270
• Torque Capacity Over OE: 20%
• Disc Type: Street Disc
• Spline Count: 14
• Spline Size (in.): 1
• Disc Diameter (in.): 8.4
• Disc Diameter (mm.): 214
• Pressure Plate Type: Heavy Duty
• Product Weight (lbs.): 11.1
• Kit Contents: 3000802, ATGM06, B012, RB131
• Warranty (Product Warranty): One (1) Year from Retail Purchase

Every design is thoroughly researched and tested prior to release to guarantee their products meet and exceed the customer's expectations. Careful attention is payed to factors such as engine torque, maximum RPM, drive type (FWD, RWD, AWD), and the type of driving being done, such as street, sport, track events, racing, etc. ACT's clutch kits are competitively priced, often with  specifications greater than competitor's and at a higher quality.

This clutch kit features a Xtreme pressure plate, an G6 racing clutch disc, and an XACT Streetlite Flywheel.

Their Xtreme pressure plate offers a 50-120% clamp load increase, moderate to heavy pedal feel, and is recommended for high performance street and racing applications. All diaphragms went through a four stage heating process for increased strength and unparalleled performance.

The G6 clutch disc is a sprung, 6-pad racing disc that is recommended for high horsepower street and race us and is better at handling high heat than the 4-pad disc. Its material composition is high quality, ceramic friction materials and a heavy duty torsional dampening springs that are rate for this clutch disc's size and expected uses. It has an increased torque capacity, and is better for faster shifting with its low weight and inertia. Being a racing disc, it has good durability and its ceramic composition allows for high heat tolerances. It also has a fast, aggressive engagement in comparison to standard street-use clutch discs.

The XACT Streetlite Flywheel is their most popular flywheel as it is great for both street and drag racing. It allows your engine to rev quicker, giving you increased throttle response, and is considerably lighter than your stock flywheel thanks to its light single-mass design, all while still being very durable!

Clutch Kit Specs:

• Torque Rating: 465 ft/lbs
• 52% torque capacity increase over stock!
• Type of Disc: Street
• 10-count spline
• Spline Size: 1-3/8" inch
• Flywheel Weight: 15.1 lbs
• 1 year Warranty from retail purchase date!