Find Parts That Fit Your Vehicle

BMW Differential and Gearing Upgrades

Upgrading various parts of the differential can have tremendous benefits in your car's performance. It's easy to forget that the differential is a source for making your car faster and handle better so it's often overlooked. The engine is not the only place to make the car faster. Our differential options vary from gearing upgrades to limited slip conversions. You can purchase the ring & pinion gear sets on their own (professional installation required) or have us build a diff around your own specifcations. The options are almost endless! Every custom-built diff is fully rebuilt with seals and bearings. We also design and supply bushing options to reduce driveline wind-up, finned differential covers for better cooling, and more!

Ratio Changes - Changing the differential gearing is one of the best and most-effective upgrades you can make on any BMW (old or new). By using a shorter (numerically higher) final drive ratio you are increasing your RPM relative to road speed - this puts you in a more powerful RPM range than before! Since you're in a 'meatier' part of the power band you're now putting down more power/torque to the ground. If you can trade outright top speed for faster acceleration at daily speeds then this is the perfect upgrade for you.

Limited Slip Upgrades - Sadly, many BMWs today are not equipped with a limited slip (posi-traction) differential. BMW has tried to compensate by using traction control that cuts power at the engine or applies the brakes to retard wheel spin (or a combination of both). But nothing beats the function and feel of a a true LSD which may be why BMW continues to use them in M cars. Our LSD upgrades can be done a number of different ways - a factory-type limited slip unit with either 2 or 3 clutch packs, helical type, OS Giken unit, or something truly custom. We can also vary ramp angles and setup to change the limited-slip behavior under acceleration, deceleration, and cornering. Need a custom diff? Call or e-mail to have a quote.

Sub-Categories

Sort By:

URO Speedometer Impulse Sender E24, E30, Z3, Z1
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:37993402
Part#: 62168355008
In Stock
$ 46.99 USD
Free Shipping on orders $49 and up
$ 46.99 USD
Free Shipping on orders $49 and up
This electronic sensor generates electrical pulses based on the final drive. These signals are then processed by the vehicle’s ECU or speedometer gauge to display real-time speed readings on the dashboard.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:339943
Part#: E46-MY-DIFF
In Stock
$ 88.99

This product was last offered at the strikethrough price on
02-26-2026

Starting at $ 56.99 USD
Free Shipping on orders $49 and up
Starting at $ 56.99 USD
Free Shipping on orders $49 and up
These rubber bushings from Meyle are a direct replacement for the stock differential bushings in the E46 3-series, E83 X3 SAV, and Z4 Roadster. If your original bushings are worn (likely around 100,000 miles) these are a great replacement upgrade. The front bushings are the stock OEM type rubber bushings. The rear bushing is a Meyle HD upgrade over stock - about 15% stiffer than the originals. This means the bushing will not flex and twist as much. This puts more power to the wheels since power is no longer used up for 'torquing' the bushing. These are not race bushings; the rubber material is perfectly suitable for street use.

The non-M E46/E83/Z4 models use three differential mounts - two front bushings in the subframe and one rear mount in the diff cover. This set of bushings covers all three. You can opt to include new mounting hardware in the Options list below.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Roadster
Show More Show Less
Burger Motorsports - Corporate Logo
T#:637547
Part#: BMS-DSBB-F
Back Ordered
Starting at $ 129.00 USD
Free Shipping
Starting at $ 129.00 USD
Free Shipping
The BMS differential brace attaches the rear differential to the subframe allowing better launches, less wheel hop, and a more stable feeling rear chassis. Their unique one-piece construction eliminates welding weak points common on similar units. No logos or markings are visible for a stealth OEM appearance.
Show More Show Less

URO Differential Cover for E46 M3
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:37993429
Part#: 33112282482
In Stock
$ 241.99 USD
Free Shipping on orders $49 and up
Differential bushing failure is a common weak point of the E46 M3. Bushings are not sold separately, you will need the whole rear cover.

URO Rear Differential Mount - BMW E24 E28
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:639176
Part#: 33171129784
In Stock
$ 37.41 USD
Free Shipping on orders $49 and up
This mount connects to the rear differential cover and secures the rear differential to the subframe.
Premium Differential Service Kit - E46 M3, E9X M3, E82 1 M Coupe ...
Includes BMW SAF-XJ limited slip differential fluid with FM booster
Packaged by Turner - Corporate Logo
T#:598688
Part#: E46M3DIFSERTMSKT
In Stock
Sale - Save 8% $ 301.99

This product was last offered at the strikethrough price on
05-03-2026

$ 277.83 USD
Free Shipping
Sale - Save 8%
$ 301.99

This product was last offered at the strikethrough price on
05-03-2026

$ 277.83 USD
Free Shipping
Servicing your differential is an important job and should only be completed using high quality components! To ensure our customers are getting exactly what they need, we have put together this limited-slip differential service kit that includes all new fluid from BMW, a new BMW drain plug, and one of our new Titanium Magnetic Differential Drain Plugs!
Show More Show Less

Burger Motorsports - Corporate Logo
T#:49822560
Part#: BMSDSBBG
Ships on Aug 28, 2026
New Item
$ 229.00 USD
Free Shipping on orders $49 and up
For G-Chassis BMW & A90/A91 Toyota Supra High torque loads, hard launches, and aggressive driving expose the factory differential mounting’s built-in compliance. Under power, the differential can shift excessively, resulting in wheel hop, inconsistent traction, and increased stress on drivetrain components—issues that become more pronounced on tuned or track-driven cars. The BMS Differential Support Bracket Brace corrects this weakness by reinforcing the differential mounting point and securely tying it to the subframe. By controlling unwanted movement, the brace improves rear-end stability and ensures power is transferred to the ground more efficiently. Why Upgrade? OEM differential mounts favor NVH reduction over control. As torque output increases, that compliance translates into drivetrain shock and lost traction. This brace stiffens the system where it matters most, reducing flex and improving load management under acceleration. Performance Benefits Improved launch consistency Significant reduction in wheel hop Increased rear-end stability under load More precise and predictable power delivery Engineered for Demanding Use Designed around factory mounting points, the BMS Differential Support Bracket delivers precise OE-level fitment with increased structural rigidity. Its robust construction resists deflection under high torque, while upgraded hardware provides greater clamping force for long-term reliability. Fully bolt-on for straightforward installation on both stock and modified vehicles. Key Features Reinforces rear differential mounting Limits differential movement under load Enhances traction and drivetrain response Heavy-duty construction for high-performance applications Bolt-on installation using factory locations Compatible with G-chassis BMW and A90/A91 Supra A focused drivetrain upgrade for drivers who demand consistency, control, and durability at higher performance levels.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:1316771
Part#: E9XDIFFBRACE-LG
Ships in 1 Business Day
$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping

Packaged by Turner - Corporate Logo
T#:42133544
Part#: 835225790TKT
In Stock
Sale - Save 2% $ 60.99

This product was last offered at the strikethrough price on
08-04-2026

$ 59.72 USD
Free Shipping on orders $49 and up
Sale - Save 2%
$ 60.99

This product was last offered at the strikethrough price on
08-04-2026

$ 59.72 USD
Free Shipping on orders $49 and up
The kit includes 2 Quarts of Red line 75w90 - 57904 and brand new Rein rear diff oil drain plug M22x1.5

Differential Bushing - Priced Each
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:641882
Part#: 33171134871
Ships in 1 Business Day
$ 27.99 USD
Free Shipping on orders $49 and up
OS Giken - Corporate Logo
T#:200230
Part#: MN024-HA
In Stock
$ 1,650.00 USD
Free Shipping
$ 1,650.00 USD
Free Shipping
If your MINI is only for competition use - autocross, time trial, or racing - this OS Giken LSD may be a better option than the standard 1.5-way unit. This race-spec LSD was developed over several seasons of competitive autocross. It uses a new high pressure ring for quicker response time and faster lockup. This makes it ideal for quick transitions and rapid on/off throttle motions typically encountered on the track. It's a one-way lockup so the car stays predictable under braking and gives the driver more feedback. For street use we prefer the normal 1.5-way setup because it's more progressive during lockup.

The biggest shortcoming of any MINI is not the lack of power - it's being able to put all of its useable power to the ground! The Cooper S is basically a one-wheel drive car and sending 200+ hp through that one tire does not live up to its full potential. A limited-slip differential is essential to any highly-tuned FWD car. The OS Giken Super-Lock is one of the most advanced clutch-type differentials on the market, and a favorite of autocrossers and road racers. The OS LSD for the MINI features ten clutch discs for a smooth and progressive lockup. By putting all of your available power to the ground you're at an instant advantage over the stock open-type differential. You'll be able to power through corners and on rough surfaces instead of uselessly spinning a wheel. Understeer is reduced by giving more bite to the tire that has the most traction. With an LSD in your MINI Cooper S you'll wonder why it wasn't first on your list to begin with (or why MINI/BMW left it out in the first place...).

The MNI OS Giken LSD uses a special 80W250 fluid that must be purchased separately.

This item fits the following BMWs:
2002-2006 R53 MINI MINI Cooper S (6MT manual transmission only)
2007-2013 R56 MINI MINI Cooper S (6MT manual transmission only)
Show More Show Less
Packaged by Turner - Corporate Logo
T#:15710761
Part#: 33117525064-KT
In Stock
Sale - Save 2% $ 100.76

This product was last offered at the strikethrough price on
06-15-2026

$ 98.71 USD
Free Shipping on orders $49 and up
Sale - Save 2%
$ 100.76

This product was last offered at the strikethrough price on
06-15-2026

$ 98.71 USD
Free Shipping on orders $49 and up
Often overlooked, scheduled rear differential service is very important. Over time gear lube breaks down causing bearings and internal components fail. Regular maintenance will keep your vehicle running properly for years to come. Kit includes 3 Bottles of Castrol SAF-XJ 75w140 2 Drain plugs
Show More Show Less


Genuine BMW M Performance - Corporate Logo
T#:402424
Part#: 33108659989
In Stock
2% off MSRP $ 3,370.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,310.99 USD
Free Shipping
2% off MSRP
$ 3,370.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,310.99 USD
Free Shipping
Ensure your getting all the power you can to the road with this LSD from BMW Performance
URO Speedometer Sensor
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:35863158
Part#: 62161369906
Ships in 1 Business Day
$ 70.99 USD
Free Shipping on orders $49 and up
$ 70.99 USD
Free Shipping on orders $49 and up
BMW URO speedometer / pulse generator is mounted in the back of the differential and provides wheel speed information to the instrument cluster speedometer.

This item fits the following BMWs:
1984-1987 E30 BMW 318i 325e 325es 325i 325ic 325is
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1983-6/1987 E24 BMW 633csi 635csi M6
1981-1987 E23 BMW 733i 735i
Show More Show Less
OS Giken - Corporate Logo
T#:34382136
Part#: BM237HAKT
Ships in 2 Business Days
$ 2,100.00 USD
Free Shipping on orders $49 and up
Upgrade to a better performing LSD, includes tune.

Rear Differential Bushing - Priced Each
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:385088
Part#: 33171090950
Ships in 1 Business Day
$ 50.99 USD
Free Shipping on orders $49 and up

OS Giken - Corporate Logo
T#:1387
Part#: BM237-HA
Ships in 2 Business Days
$ 1,950.00 USD
Free Shipping
$ 1,950.00 USD
Free Shipping
The M Dynamic limited slip unit on the M3 is designed to be a pure street car differential. It's simply not up to the rigors of professional or amateur racing. The OS Giken Super Lock LSD is giant step up in from a stock M3 lsd unit. It's ready for the extreme conditions of racing, offers 100% progressive locking capability, and is able to do this while operating smoothly and quietly. It's use of advanced technologies that make it perfect for both street cars AND pro race cars... and everything in between. We're excited to be carrying the OS Giken LSD unit in our performance catalog, as we've been using them in our own Championship winning M3 race cars.

OS Giken incorporated revolutionary new ideas when developing the their own limited slip diff, utilizing their accumulated racing knowledge and experience and over 4 years of development. Their design uses an unprecedented number of friction plates (up to 28 total!) for better locking force, better engagement/disengagement, and less generated heat. The end result of their efforts is the OS Giken's OS Super Lock LSD which offers incredible durability and reliability on street and track driven BMWs. The use of highest quality materials, precise machining, forged gears and sound engineering makes this LSD durable and reliable enough for road racing performance (which we can personally vouch for!). This is such a great design, in that it can be used in any situation -- whether it's for a street car, or a 100% Professional race car. Zero break-in required. Super smooth and quiet engagement, and 100% progressive locking capability. Professional installation is recommended.

This Limited Slip Differential Unit fits the following BMWs:
2001-2006 E46 M3 coupe & convertible
2008-2013 E9X M3 coupe & convertible
1991-1995 E34 M5 sedan
1999-2003 E39 M5 sedan
2006-2008 E85 Z4M Z4 M Coupe, Z4 M Roadster
Show More Show Less
Packaged by Turner - Corporate Logo
T#:386282
Part#: E9X-DIFF-MOUNTS
Ships in 1 day
$ 193.25 USD
Free Shipping
$ 193.25 USD
Free Shipping

This package of OEM E82 E90 E92 diff mounts replaces the stock rubber diff bushings. On a tuned 335i you may have noticed more driveline shudder or problems hooking up during hard launches. What happens is the stock rubber bushings are under constant flex as engine torque is transmitted through the differential. Under normal driving with a stock car the bushings are rarely stressed. But factor in significant additional torque from a tuned N54/N55 and the stock rubber will quickly show its weaknesses. You may have even broken a diff bolt or two as the heavy differential shifts around. Even non-turbo E82 and E9X models may benefit from fresh bushings.

This is a set of stock rubber bushings, made by OEM supplier Lemforder. They are the same as the Genuine BMW E9X diff mount bushings, but without the more expensive branding. If you're turned off by potential side effects of urethane or Delrin then the OEM diff mounts are your best option. The OEM mounts fit and perform just like the originals so there is no second guessing their quality. If you're looking for an upgrade we offer E9X solid Delrin and aluminum diff mounts that work well, even in street applications.

E9X Diff Mount Set includes:

  • 33176760287 x 2, front differential mount
  • 33176770866 x 1, rear differential mount
  • (new hardware is optional and can be ordered separately below)

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
Show More Show Less

Genuine BMW M Performance - Corporate Logo
T#:25805756
Part#: 33108659989KTKT
Ships in 1 day
$ 3,366.99 USD
$ 3,366.99 USD
Looking to upgrade your stock differential to the BMW M Performance differential? This kit includes the M Performance limited slip diff plus all the hardware necessary to install the diff in your BMW! What exactly does an LSD do you ask? Well, without an LSD your car is effectively only 1 wheel drive, in that it can't supply torque to both wheels at the same time and will only supply torque to the wheel with less grip, which is what the shortfall is to an open differential (what most vehicles have). An LSD only lets the wheels spin at different speeds by a limited amount, which is typically a percentage difference, which is when the differential locks and both wheels get power. This is not how locked differentials work such as in off-road trucks which supply equal torque and rotational speed to both rear wheels at the same time, which can cause issues with handling.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:401688
Part#: 33117512980KT
Ships in 1 day
$ 367.99 USD
Free Shipping
$ 367.99 USD
Free Shipping

The perfect upgrade for any E46, this finned differential cover increases cooling to the rear differential to prevent over heating and possible damage. This is a complete kit including fluid and drain plugs.

Includes the following

  • Aluminum finned differential cover
  • Drain & fill plug with sealing o-ring
  • 2 Quarts of Redline 75w90
Show More Show Less

Genuine BMW M Performance - Corporate Logo
T#:222981
Part#: 33108659987
Ships in 1 day
8% off MSRP $ 3,370.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,100.35 USD
8% off MSRP
$ 3,370.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,100.35 USD
For the ultimate in track day performance, the M Performance Limited Slip Differential is here! The clutch-type mechanical differential features a 30% lockup on acceleration and 9% lockup on deceleration. The differential works with the existing DSC system to provide excellent traction wet or dry. It uses the stock 3.08 final drive ratio that the stock M235i uses, so fuel economy will not be affected.  This item fits the following BMWs:
2014+  F22 BMW  228i M235i
Show More Show Less

Packaged by Turner - Corporate Logo
T#:24344778
Part#: ECSTMSPDBKT
In Stock
Sale - Save 8% $ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD
Free Shipping on orders $49 and up
Turner recommends running drivetrain mounts of all the same variety - if you are using poly engine mounts, you should also use poly transmission mounts. This kit is your solution to make sure all components of your vehicle are working with each other to achieve the performance you're looking for. Polyurethane material is more resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber. Keep your vehicle planted for spirited driving while having crisper throttle response and reduce drivetrain movement along with wheel hop. Kit includes: Turner Engine Mount Set - 60A Polyurethane ECS Transmission Mount Set - Street 70A Polyurethane ECS Differential Bushing Set - 95A Polyurethane ECS Subframe Mount Set - 95A - Polyurethane
Show More Show Less
Packaged by Turner - Corporate Logo
T#:556968
Part#: 33112282482KT3
Ships on Aug 28, 2026
Sale - Save 7% $ 676.14

This product was last offered at the strikethrough price on
05-03-2026

$ 627.61 USD
Free Shipping
Sale - Save 7%
$ 676.14

This product was last offered at the strikethrough price on
05-03-2026

$ 627.61 USD
Free Shipping

This kit includes Turner Motorsport solid aluminum differential race mounts pre installed in the differential cover for a quick install. These mounts where developed by Turner Motorsport for their Grand-Am Cup E46 M3 race cars, the advantages of solid aluminum mounts is increased suspension & drivetrain response, less drivetrain loss resulting in more wheel horsepower, and longevity - they effectively last forever. These CNC-machined mounts are a direct replacement for the stock rubber pieces, and have been lightened to remove excess weight. 

 

Show More Show Less
URO - Corporate Logo
T#:43750219
Part#: 33107505604
In Stock
$ 10.00 USD
Free Shipping on orders $49 and up
$ 10.00 USD
Free Shipping on orders $49 and up
Maintaining a proper amount of fluid in the rear differential is vital to the performance and longevity of the differential. If a leaking shaft seal is left untouched, the results could be catastrophic. Two seals required per vehicle.
Show More Show Less


URO - Corporate Logo
T#:49335120
Part#: 33121213949
In Stock
$ 18.99

This product was last offered at the strikethrough price on
07-27-2026

$ 15.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 18.99

This product was last offered at the strikethrough price on
07-27-2026

$ 15.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Replaces cracked or hardened valve body seals
Packaged by Turner - Corporate Logo
T#:56327180
Part#: F3XAWDFDKT5
In Stock
New Item
Sale - Save 1% $ 104.99

This product was last offered at the strikethrough price on
08-04-2026

$ 103.54 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 104.99

This product was last offered at the strikethrough price on
08-04-2026

$ 103.54 USD
Free Shipping on orders $49 and up
This kit combines Red Line 75W85 GL-5 Synthetic Gear Oil with Rein OEM replacement plugs in order to perform a full drain and fill service on both of your differentials
Packaged by Turner - Corporate Logo
T#:15744025
Part#: 331175250640-KT
In Stock
Sale - Save 8% $ 274.99

This product was last offered at the strikethrough price on
05-03-2026

$ 252.18 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 274.99

This product was last offered at the strikethrough price on
05-03-2026

$ 252.18 USD
Free Shipping on orders $49 and up
Often overlooked, scheduled rear differential service is very important. Over time gear lube breaks down causing bearings and internal components fail. Regular maintenance will keep your vehicle running properly for years to come. Three bottle of Genuine BMW Limited Slip Gear Lube 1 New Genuine BMW Drain/Fill plugs 1 ECS Magnetic Differential Oil Drain Plug Drain plug O-ring
Show More Show Less

Packaged by Turner - Corporate Logo
T#:56038061
Part#: E9XSBFRDFFBKT2
In Stock
New Item
$ 491.99 USD
Free Shipping on orders $49 and up
This complete upgrade package is designed to put an end to steering slop. Utilizing a high performance 95A durometer polyurethane formulation, this kit replaces the mushy OEM rubber with proven rigidity.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:56327200
Part#: F3XAWDFDKT6
Ships in 1 Business Day
New Item
$ 154.99

This product was last offered at the strikethrough price on
08-07-2026

$ 154.52 USD
Free Shipping on orders $49 and up
$ 154.52 USD
Free Shipping on orders $49 and up
This kit combines Motul 75W85 GL-5 Synthetic Gear Oil with Rein OEM replacement plugs in order to perform a full drain and fill service on both of your differentials
Packaged by Turner - Corporate Logo
T#:42099854
Part#: 07512293972T3KT
Ships in 1-3 days
Sale - Save 13% $ 303.99

This product was last offered at the strikethrough price on
05-03-2026

$ 264.15 USD
Free Shipping on orders $49 and up
Sale - Save 13%
$ 303.99

This product was last offered at the strikethrough price on
05-03-2026

$ 264.15 USD
Free Shipping on orders $49 and up
Maintain smooth power distribution, protect your drivetrain, and extend the life of your BMW xDrive system with the Complete Xdrive Differential And Transfer Case Service Kit - E90, E91, E92, E60, E61, E70.
Show More Show Less

OS Giken - Corporate Logo
T#:338590
Part#: BM531-HA
Ships in 2 Business Days
Starting at $ 3,700.00 USD
Starting at $ 3,700.00 USD
video: E92 335i with limited slip

click for high quality
A turbocharged BMW such as the 135i or 335i needs traction to put that power to the ground. The stock differential of both the 135i and 335i only put power to one wheel -- this just won't cut it! Upgrading to a limited slip differential means power to BOTH wheels, for better lauch, acceleration, and track handling. We're excited to be carrying the OS Giken LSD unit in our performance catalog, as we've used their products on our own Championship winning E46 and E92 race cars.

With the 135i/335i LSD unit, they have incorporated revolutionary new ideas into the design (4 years in the making!) which uses an unprecedented number of friction plates (up to 28 total!) for better locking force, better engagement/disengagement, and less generated heat. The end result of their efforts is the OS Giken's OS Super Lock LSD which offers incredible durability and reliability on street and track driven BMWs. The use of highest quality materials, precise machining, forged gears and sound engineering makes this LSD durable and reliable enough for road racing performance (which we can personally vouch for!). Zero break-in required. Super smooth and quiet engagement, and 100% progressive locking capability.

Installation note: BMW differentials use many unique and BMW-only parts and components. Only technicians who are experienced and familiar with BMW parts should perform the installation. The OS Giken LSD is the limited slip unit (or 'chunk') only. It replaces the stock non-LSD chunk but the original ring and pinion and other internals must be installed with the OS Giken unit. This unit will only work on 335i manual differentials with a bolt-in or modified ring gear. Proper setup and spacing is critical for long life operation. Incorrect installation will void the warranty. We also offer the TCD unit pre-installed - see our performance diff catalog for more info.

The OS Giken Superlock Diff unit fits the following BMWs:
2008-2012 E82 BMW 135i with manual transmission
2007-2011 E90 BMW 335i - Sedan with manual transmission
2007-2013 E92 BMW 335i 335is - Coupe with manual transmission
2007-2013 E93 BMW 335i - Convertible with manual transmission
Show More Show Less
OS Giken - Corporate Logo
T#:338591
Part#: BM531-HC
Ships in 2 Business Days
Starting at $ 2,550.00 USD
Starting at $ 2,550.00 USD
video: E92 335i with limited slip
click for high quality

As Used on Project E92 335i
A turbocharged BMW such as the 135i or 335i needs traction to put that power to the ground. The stock differential of both the 135i and 335i only put power to one wheel -- this just won't cut it! Upgrading to a limited slip differential means power to BOTH wheels, for better launch, acceleration, grip, and track handling. We're excited to be carrying the OS Giken LSD unit in our performance catalog, as we've used their products on our own Championship winning E46 and E92 race cars.

OS Giken's newest innovation is their quietest and smoothest limited slip unit yet - the Traction Control Differential (TCD). TCD is similar to their excellent Superlock differentials but with additional oil channels and pathways. The added lubrication makes diff operation smoother and quieter than before (not that there were many complaints to begin with). The locking engagement is more progressive than before which makes this diff more suitable for street driving. Track cars and drift cars should still use the Superlock LSD as it will transition to lock sooner. TCD is an evolution of a diff that was already extremely well-engineered for road and track use. Not willing to rest on their laurels, they took their superior engineering a step further.

With the 135i/335i LSD unit, they have incorporated revolutionary ideas into the overall limited-slip design which uses an unprecedented number of friction plates (up to 28 total!) for better locking force, better engagement/disengagement, and less generated heat. The use of highest quality materials, precise machining, forged gears, and sound engineering makes this LSD durable and reliable enough for road racing performance (which we can personally vouch for!). Zero break-in required. 100% progressive locking capability. 

Installation note: BMW differentials use many unique and BMW-only parts and components. Only technicians who are experienced and familiar with BMW parts should perform the installation. The OS Giken LSD is the limited slip unit (or 'chunk') only. It replaces the stock non-LSD chunk but the original ring and pinion and other internals must be installed with the OS Giken unit. This unit will only work on 335i manual differentials with a bolt-in or modified ring gear. Proper setup and spacing is critical for long life operation. Incorrect installation will void the warranty. We also offer the TCD unit pre-installed -  see our performance diff catalog for more info.

The OS Giken TCD Diff unit fits the following BMWs:
2008-2012  E82 BMW   135i with manual transmission
2007-2011  E90 BMW   335i - Sedan with manual transmission
2007-2013  E92 BMW   335i 335is - Coupe with manual transmission
2007-2013  E93 BMW   335i - Convertible with manual transmission
Show More Show Less

Rogue Engineering - Corporate Logo
T#:54388516
Part#: RE.484.FIX
Ships in 8 Business Days
New Item
$ 64.00 USD
Free Shipping on orders $49 and up
A common failure point on the BMW E46 M3 platform occurs when the side differential mounting bolt backs out, leading to stripped threads in the differential cover.

OS Giken - Corporate Logo
T#:34382134
Part#: LSD-TUNE
Ships in 2 Business Days
$ 150.00 USD
Free Shipping
$ 150.00 USD
Free Shipping
Packaged by Turner - Corporate Logo
T#:56471654
Part#: 27102413711KT2
Ships in 4 Business Days
New Item
$ 228.99 USD
Free Shipping on orders $49 and up
This Transfer Case Repair Kit provides an exact-fit, OEM grade solution engineered to rebuild the servomotor assembly back to factory operating specifications. Designed for enthusiasts who demand crisp power transfer and exact mechanical feedback from their drivetrain.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:56471655
Part#: 27102413711KT3
Ships in 4 Business Days
New Item
$ 228.99 USD
Free Shipping on orders $49 and up
This Transfer Case Repair Kit provides an exact-fit, OEM grade solution engineered to rebuild the servomotor assembly back to factory operating specifications. Designed for enthusiasts who demand crisp power transfer and exact mechanical feedback from their drivetrain.
Show More Show Less


Packaged by Turner - Corporate Logo
T#:56471657
Part#: 27102413711KT4
Ships in 4 Business Days
New Item
$ 228.99 USD
Free Shipping on orders $49 and up
This Transfer Case Repair Kit provides an exact-fit, OEM grade solution engineered to rebuild the servomotor assembly back to factory operating specifications. Designed for enthusiasts who demand crisp power transfer and exact mechanical feedback from their drivetrain.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:56471658
Part#: 27102413711KT5
Ships in 4 Business Days
New Item
$ 228.99 USD
Free Shipping on orders $49 and up
This Transfer Case Repair Kit provides an exact-fit, OEM grade solution engineered to rebuild the servomotor assembly back to factory operating specifications. Designed for enthusiasts who demand crisp power transfer and exact mechanical feedback from their drivetrain.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:55353632
Part#: 33108659987KT2
Ships in 1 day
New Item
$ 3,481.99 USD
$ 3,481.99 USD
Under hard acceleration, that stock rear diff twists, flexes, and deflects. Robbing your car of power

Packaged by Turner - Corporate Logo
T#:56616382
Part#: 27111226467KT3
Ships in 5 Business Days
New Item
$ 48.99 USD
Free Shipping on orders $49 and up
This Transfer Case Service Kit replaces degraded fluid and sealing hardware to maintain proper lubrication within the all wheel drive transfer case. Unserviced transfer case fluid breaks down into sludge and deposits, causing lubrication loss and internal component wear; this service kit prevents internal wear by renewing fluid properties and drain hardware.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:56616376
Part#: 27111226467KT2
Ships in 5 Business Days
New Item
$ 48.99 USD
Free Shipping on orders $49 and up
This Transfer Case Service Kit replaces degraded fluid and sealing hardware to maintain proper lubrication within the all wheel drive transfer case. Unserviced transfer case fluid breaks down into sludge and deposits, causing lubrication loss and internal component wear; this service kit prevents internal wear by renewing fluid properties and drain hardware.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:55965861
Part#: 30309175WKWVTKT2
Ships in 10 Business Days
New Item
$ 1,269.99 USD
Free Shipping on orders $49 and up
This AutoTech LSD Upgrade Kit pairs AutoTech’s highly engineered 188mm limited-slip differential carrier with a pair of Corteco output shaft seals, giving you everything you need for a leak-free install.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:41289766
Part#: 31521428678TKT
Back Ordered
$ 52.99

This product was last offered at the strikethrough price on
07-23-2026

$ 50.99 USD
Free Shipping on orders $49 and up
$ 50.99 USD
Free Shipping on orders $49 and up
This kit comes with the seal and both dust covers needed to re-seal your vehicles input shaft on the front differential.