BMW Engine Parts

N54/N55 Low Temp Oil Thermostat Kit - 70c

T#:52621839

Part#: 008731KT1

In Stock

Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Qty

Sale - Save 23%

$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

T#:49822557

Part#: VTTBS58BLOCK

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

Performance Oil Separator Kit - M52/S52

T#:51356040

Part#: 059015LA02KT2KT

Ships on Oct 5, 2026

Sale - Save 19% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.77 USD

Add to Wish List

Qty

Sale - Save 19%

$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.77 USD

Add to Wish List

On M52/S52-equipped BMWs, the factory crankcase ventilation (CCV) system is a notorious weak link. Between brittle plastic corrugated hoses that crumble from heat soak and an internal cyclone diaphragm prone to tearing, a failing CCV leads to massive oil consumption, vacuum leaks, and that dreaded "howling" whistle.

This kit addresses these issues with all new components and hardware. Both oil separator hoses, the cyclone separator itself, the mounting grommet, and the retaining bolts are included. Servicing this system is guaranteed to restore performance lost as a result of worn CCV components.

Kit includes:

Cyclone Separator/Crankcase Pressure Regulator Valve High Performance Silicone Breather Hose Return Hose Mounting Grommet Hex Bolt (3)

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 3 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

Bosch Starter Motor With Hardware

T#:56110332

Part#: SR0492NKT4

In Stock

$ 273.99

This product was last offered at the strikethrough price on
08-14-2026

$ 261.99 USD

Add to Wish List

Qty

$ 261.99 USD

Add to Wish List

At the core is a brand-new Bosch Starter Motor, engineered to withstand extreme operating conditions while delivering immediate cranking speed. This kit includes also the required Genuine BMW Aluminum Mounting Screw Set.

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

S65 Timing Chain Kit - E90, E92, M3

T#:55353596

Part#: 11317838479KT2

Ships in 5 Business Days

$ 1,495.99 USD

Add to Wish List

Qty

$ 1,495.99 USD

Add to Wish List

Fuel Injector Replacement Kit - N52

T#:53044116

Part#: 13537531634RKT2

In Stock

Sale - Save 22% $ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 247.50 USD

Add to Wish List

Qty

Sale - Save 22%

$ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 247.50 USD

Add to Wish List

Restore engine performance and drivability by replacing those old, high mileage fuel injectors. Includes injector clips.

VANOS Rebuild Kit & Exhaust Hub Upgrade - E46 M3, Z3 M, Z4 M (S54) ...

T#:53608871

Part#: 11367832031KT5

Ships on Dec 24, 2026

Sale - Save 31% $ 703.99

This product was last offered at the strikethrough price on
05-30-2026

$ 484.10 USD

Add to Wish List

Qty

Sale - Save 31%

$ 703.99

This product was last offered at the strikethrough price on
05-30-2026

$ 484.10 USD

Add to Wish List

Take the guesswork out of S54 ownership. This all-inclusive kit targets the two most notorious failure points on the BMW S54 engine: broken exhaust hub tabs and degraded internal seals.

Turner Motorsport S54 VANOS Exhaust Hub Upgrade

The factory S54 exhaust hub is a ticking time bomb. Excessive play between the drive tabs and the oil pump disk creates a rhythmic rattling that eventually shears the tabs off, risking catastrophic engine failure.

While other kits require deep-engine surgery, our Turner Motorsport Hub Upgrade offers a "work smarter" approach.

Precision Engineering: Developed using 3D scanning and CAD modeling for a perfect, interference-free fit.

Superior Materials: Machined from high-strength 4340 steel and hardened to OEM specifications.

No Re-Timing Required: This bolt-on fix eliminates the failure point without the need to disassemble the VANOS unit or disturb engine timing, saving hours of labor.

ECS Tuning VANOS Seal Kit

The original BMW seals are made of Buna-N rubber, which quickly hardens and loses its sealing properties when exposed to synthetic oil and high heat. Our ECS engineering team has corrected this flaw.

Viton™ Upgrade: We utilize high-performance Viton O-rings for the internal seals, seal plate, and solenoid.

Chemical Resistance: These seals are designed to remain pliable and effective for the life of the engine, restoring lost low-end torque and smoothness.

ECS Tuning Rattle Repair Kit

Eliminate the dreaded "marbles in a can" sound. This kit addresses the axial play in the VANOS helical gears.

Hardened Steel: Our rings and washers are precision-ground to resist the wear and deformation that lead to engine rattle.

Silent Operation: Restores the refined sound and feel of your S54 across the entire RPM range.

Show More Show Less

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

T#:52586654

Part#: 135175888791KTKT

In Stock

$ 1,575.99 USD

Add to Wish List

Qty

$ 1,575.99 USD

Add to Wish List

Includes $413.00 core charge.

Vargas Oil Feed Adapter - BMW N54

T#:51778141

Part#: VTT-N54-OFA

Ships in 10 Business Days

$ 41.99

This product was last offered at the strikethrough price on
08-03-2026

$ 39.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 41.99

This product was last offered at the strikethrough price on
08-03-2026

$ 39.99 USD

Limited Qty Sale

Add to Wish List

The Vargas Oil Feed Adapter is designed to replace the stock front turbo oil feed line with a robust, CNC-machined solution.

VANOS Exhaust Hub Upgrade Kit - E46 M3, Z3 M, Z4 M (S54)

T#:53608869

Part#: 11367832031KT3

In Stock

Sale - Save 37% $ 410.99

This product was last offered at the strikethrough price on
05-30-2026

$ 257.29 USD

Add to Wish List

Qty

Sale - Save 37%

$ 410.99

This product was last offered at the strikethrough price on
05-30-2026

$ 257.29 USD

Add to Wish List

The factory VANOS exhaust hub on the S54 engine is known to develop excessive play where the drive tabs interface with the oil pump disk. Over time, this imprecise fitment causes a back-and-forth rattling motion that can result in the tabs shearing off inside the engine, risking catastrophic damage or complete engine failure. Unlike other aftermarket solutions that require full VANOS disassembly, retiming, or replacement of the oil pump disk, the Turner Motorsport S54 VANOS Hub Upgrade offers a smarter approach. Our bolt-on fix eliminates the common failure point without opening the VANOS unit or disturbing engine timing.

Our solution involves removing the worn tabs from your stock exhaust hub and installing our precision-fit replacement, which is precision-machined from 4340 steel and hardened to meet OEM specifications. Designed using 3D scanning and CAD modeling, the Turner Motorsport VANOS Exhaust Hub Upgrade provides a tight, interference-free fit into the oil pump disc, completely resolving the issue without unnecessary labor.

Features & Benefits:

Direct bolt-on solution for S54 VANOS oil pump drive tab failure, preventing potentially catastrophic damage to engine internals Precision-machined from high-strength 4340 steel and heat-treated to match OEM specifications Designed using 3D scanning and CAD modeling to ensure precise fitment within the OEM oil pump disc Engineered to eliminate the play that exists between the exhaust hub and oil pump disc from factory Backed by extensive real-world testing and our lifetime replacement program! Kit Contents:

Turner Motorsport Exhaust VANOS Hub Upgrade 4x Extended Length Hex Head Bolts (M6x30 Gr. 10.9) 8x OEM BMW VANOS Hub Hex Head Bolts (M6x25) 12x Fillister Head Torx Screw (M6x16) OEM Valve Cover Gasket OEM VANOS to Cylinder Head Gasket

Show More Show Less

Vargas Plug And Play S58 Single HPFP Conversion Kit - BMW G8X/F9X S58...

T#:51778123

Part#: VTT-S58-SINGLE-H

In Stock

$ 349.00

This product was last offered at the strikethrough price on
07-28-2026

$ 316.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 349.00

This product was last offered at the strikethrough price on
07-28-2026

$ 316.99 USD

Limited Qty Sale

Add to Wish List

The Vargas Turbo Technologies (VTT) S58 Single HPFP Conversion Kit is a revolutionary solution for high-horsepower BMW G8X and F9X builds.

Bosch Oxygen Sensors - Bank 1 And 2 Pre-Cat - N52

T#:56110313

Part#: 11787558055KT

In Stock

$ 307.99

This product was last offered at the strikethrough price on
08-13-2026

$ 304.99 USD

Add to Wish List

Qty

$ 304.99 USD

Add to Wish List

Your engine's air fuel ratio needs to be dead on. Worn out factory pre-cat oxygen sensors delay vital data to the DME, leading to sub optimal fueling, lost horsepower, and dangerous hesitation under load.

Show More Show Less

Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55

T#:56038085

Part#: 11137600482KT4

In Stock

$ 130.99 USD

Add to Wish List

Qty

$ 130.99 USD

Add to Wish List

This Hardware & Gasket Refresh Kit takes the guesswork out of maintenance. This kit bundles a high quality replacement oil pan gasket with a fresh, complete set of factory spec aluminum hardware. Whether you are dropping the subframe for a preventative overhaul or chasing down an active oil leak

Show More Show Less

Mitsubishi Turbocharger With Manifold And Gasket - F39, F48 - B48 ...

T#:56254773

Part#: 11658626637KT3

In Stock

$ 1,317.99 USD

Add to Wish List

Qty

$ 1,317.99 USD

Add to Wish List

This turnkey replacement package pairs the genuine Mitsubishi OEM Turbocharger with a new Exhaust Manifold Gasket to restore instant boost delivery and leak free performance.

Bosch Oxygen Sensor Set - Pre and Post Catalytic Converter - N55 ...

T#:55857772

Part#: 11787589475KT2

In Stock

$ 335.99 USD

Add to Wish List

Qty

$ 335.99 USD

Add to Wish List

Extreme exhaust heat and carbon buildup degrade your factory oxygen sensors over time, sending lazy data to your DME and robbing you of performance.

T#:55317713

Part#: BFR1/2O2SKT2

In Stock

$ 400.99

This product was last offered at the strikethrough price on
07-14-2026

$ 333.99 USD

Add to Wish List

Qty

$ 333.99 USD

Add to Wish List

Over time, that degradation robs your BMW of its crisp throttle response, tanks your fuel economy, and leaves you staring at a failed emissions ticket

Rear Oxygen Sensor Set - N52, N54

T#:55353594

Part#: 11787545074/5KT2

In Stock

$ 366.99 USD

Add to Wish List

Qty

$ 366.99 USD

Add to Wish List

Sluggish oxygen sensors do a lot more than just light up your dashboard with an annoying Check Engine Light—they directly choke your BMW’s performance.

T#:55317700

Part#: S85RBKT2

In Stock

$ 1,103.00 USD

Add to Wish List

Qty

$ 1,103.00 USD

Add to Wish List

From the factory, the S85’s rod bearing clearances are notoriously tight. Over time, this lack of adequate oil clearance leads to premature wear, accelerated friction, and the looming threat of catastrophic engine failure.

Show More Show Less

Fuel pump and level sensor kit

T#:56471664

Part#: 16116768788KT2

Ships in 1 Business Day

$ 664.00 USD

Add to Wish List

Qty

$ 664.00 USD

Add to Wish List

This targeted refresh package to completely restore your E46’s fuel tank module. Built around a high grade Continental fuel pump assembly this kit ensures maximum fuel flow stability, precise fuel gauge readings, and a leak free installation.

Show More Show Less

Rod Bearing Set - Standard (48.00 Mm)

T#:55821723

Part#: 11241715701

Ships in 2 Business Days

$ 151.99 USD

Add to Wish List

Qty

$ 151.99 USD

Add to Wish List

Oil Separator kit - N63

T#:56291074

Part#: 11158636540KT2

Ships in 3 Business Days

$ 429.67 USD

Add to Wish List

Qty

$ 429.67 USD

Add to Wish List

If your BMW is burning oil, showing unmetered air faults, or suffering from degraded throttle response, a compromised breather system is usually the culprit. The N63 Crankcase Breather Package pairs Genuine BMW oil separators with OE tier Rein connecting pipes. Designed to restore factory level oil separation and sealed vacuum integrity across both cylinder banks

Show More Show Less

DRY Level 3 Timing Chain Kit (no fluids) - M62TU

T#:53149921

Part#: 11311435026NFKT

Ships in 1-2 days

Sale - Save 5% $ 1,070.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,020.67 USD

Add to Wish List

Qty

Sale - Save 5%

$ 1,070.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,020.67 USD

Add to Wish List

VTT Turbocharger Inlet Flange - 2" Sch 10 - Garrett G25/G30/G35 ...

T#:52270239

Part#: GARING25

Ships in 10 Business Days

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Unlock the full potential of your Garrett G-Series turbocharger with the VTT-FAB Precision Inlet Flange.

Supercharger Kit Level 1 - E46 3330i

For model years 1999-2002 ~ Call in to provide vin before purchase

T#:50899198

Part#: 12-016M430

Ships in 10 Business Days

$ 9,856.00 USD

Add to Wish List

Qty

$ 9,856.00 USD

Add to Wish List

Add proven forced induction performance to your E46 330i with the Active Autowerke Supercharger Kit. Designed to deliver a significant horsepower increase without sacrificing daily usability, this system operates safely on 91 to 93 octane pump fuel and integrates directly with the factory ECU. Active Autowerke’s dyno developed calibration manages ignition timing, fueling, VANOS function, and rev limits through the stock DME for consistent, predictable results. Power delivery remains smooth and repeatable with OEM like drivability, and the system can be returned to stock configuration if needed. The included self contained oil cooling circuit keeps installation straightforward without modifying the factory oil system. For E46 owners seeking a complete, well engineered bolt on solution, this kit offers substantial, reliable gains. Key Features Rotrex C38-81 trim supercharger 8 PSI boost pressure CNC machined supercharger bracket with hardware Self contained oil system with front mount oil cooler Six higher flow fuel injectors Active Autowerke/Bosch bypass valve High temperature silicone hoses with stainless clamps Mandrel bent aluminum tubing for improved flow Active Autowerke performance air filter (K&N on select models) Active Autowerke dyno tuned software Complete mounting hardware, plumbing, hoses, and clamps Illustrated installation manual and guide 1 year warranty with technical support Performance Specifications Power: 320 BHP @ 7000 RPM Torque: 260 lb ft @ 5400 RPM Boost Level: 8.0 PSI

Show More Show Less

Supercharger Kit Level 1 - E46 330 2003+

For model years 2003+ ~ Call in to provide vin before purchase

T#:50899201

Part#: 12-016M45

Ships in 10 Business Days

$ 9,856.00 USD

Add to Wish List

Qty

$ 9,856.00 USD

Add to Wish List

Add proven forced induction performance to your E46 330i with the Active Autowerke Supercharger Kit. Designed to deliver a significant horsepower increase without sacrificing daily usability, this system operates safely on 91 to 93 octane pump fuel and integrates directly with the factory ECU. Active Autowerke’s dyno developed calibration manages ignition timing, fueling, VANOS function, and rev limits through the stock DME for consistent, predictable results. Power delivery remains smooth and repeatable with OEM like drivability, and the system can be returned to stock configuration if needed. The included self contained oil cooling circuit keeps installation straightforward without modifying the factory oil system. For E46 owners seeking a complete, well engineered bolt on solution, this kit offers substantial, reliable gains. Key Features Rotrex C38-81 trim supercharger 8 PSI boost pressure CNC machined supercharger bracket with hardware Self contained oil system with front mount oil cooler Six higher flow fuel injectors Active Autowerke/Bosch bypass valve High temperature silicone hoses with stainless clamps Mandrel bent aluminum tubing for improved flow Active Autowerke performance air filter (K&N on select models) Active Autowerke dyno tuned software Complete mounting hardware, plumbing, hoses, and clamps Illustrated installation manual and guide 1 year warranty with technical support Performance Specifications Power: 320 BHP @ 7000 RPM Torque: 260 lb ft @ 5400 RPM Boost Level: 8.0 PSI

Show More Show Less

Vargas Port Injector Block Off Blanks - BMW G8X F9X S58

T#:52164927

Part#: S58PIBLOBLANKS

Ships in 10 Business Days

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

The PFS S58 Port Injection Block-Off Kit offers a robust and reliable way to seal secondary fuel ports in the S58 intake manifold.

PRIMA Supercharger Kit (Non-Intercooled) - E46 M3

For SMG Transmissions Only ~ Call in to provide vin before purchase

T#:50899202

Part#: 12-021S

Ships in 10 Business Days

$ 8,906.00 USD

Add to Wish List

Qty

$ 8,906.00 USD

Add to Wish List

Co-developed with Frank Smith of TuningTechFS, the Active Autowerke PRIMA Supercharger Kit delivers a proven entry point into forced induction for the E46 M3. The system is engineered around efficiency, repeatability, and upgrade potential, with a baseline configuration that can grow beyond 500 WHP through available Level 1 and Level 2 packages. PRIMA focuses on clean, practical design. This is a fully bolt-on, non intercooled setup that installs without custom fabrication and can be reverted to stock if required. The modular architecture also allows straightforward progression to higher output configurations. As expected from Active Autowerke, the kit enhances overall performance while preserving the sharp throttle response and balanced character of the S54-powered M3. PRIMA Supercharger Kit Key Features Rotrex C38-92 supercharger assembly Active Autowerke GEN 9 intake manifold plenum Active Autowerke dual blow off valve configuration Active Autowerke green performance filter with cover Alpha N calibration with SIMON 4 interface included High capacity fuel injectors Colder heat range spark plugs Dedicated self contained oil cooling circuit Pre assembled hoses, clamps, and installation hardware Compatible with Level 1 and Level 2 upgrade paths Baseline Dynojet Results Boost: 5.8 PSI Stock Power: 285.4 WHP @ 7500 RPM Stock Torque: 232.36 lb ft @ 5250 RPM Supercharged Power: 426.69 WHP @ 8150 RPM Supercharged Torque: 297.99 lb ft @ 7200 RPM

Show More Show Less

Accessory Belt Service Kit - N55

T#:56218611

Part#: N55BMWKT4

Ships in 2 Business Days

$ 185.68 USD

Add to Wish List

Qty

$ 185.68 USD

Add to Wish List

This comprehensive drive service kit is built around high grade Continental and INA original equipment parts. Designed to handle high load operation, this kit restores factory belt geometry and dynamic tensioning

Show More Show Less

Mitsubishi Turbochargers With Manifolds - Front And Rear Position ...

T#:56218577

Part#: 11657849650/1KT2

Ships in 2 Business Days

$ 2,259.99 USD

Add to Wish List

Qty

$ 2,259.99 USD

Add to Wish List

This Twin Turbo Kit includes brand new, factory original Mitsubishi front and rear turbochargers with built in manifolds. These are identical to the units supplied through dealer networks, offering perfect fitment and factory balanced assemblies.

Show More Show Less

Vargas Billet CNC Valve Cover - Black - BMW B58 TU & Toyota A90/91 Su...

T#:51813335

Part#: VTT-B58TU-BVC-BL

Ships in 10 Business Days

$ 1,769.99 USD

Add to Wish List

Qty

$ 1,769.99 USD

Add to Wish List

While the stock plastic cover looks uninspired and degrades over time, the VTT Billet cover serves as a centerpiece for any high-end engine bay.

Vargas GC-Mid Turbocharger Upgrade - BMW B58 TU 2-port

T#:52305479

Part#: B58-GCMID-2

Ships in 10 Business Days

$ 2,409.99 USD

Add to Wish List

Qty

$ 2,409.99 USD

Add to Wish List

Engineered specifically for the B58TU 2-port platform, the VTT GC-Mid (Game Changer - Mid) focuses on volumetric efficiency and thermal management.

Vargas High Flow Catch Can System - BMW G8X M2, M3, M4

T#:51918851

Part#: VTT-HFCCG8X12

Ships in 10 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The VTT High-Flow Catch Can System is engineered specifically for high-horsepower BMW G8X builds where standard PCV systems fail to keep up.

Vargas Coil Hold Down Kit - Gold - BMW N54

T#:51918876

Part#: VTT-N54CBGOLD

Ships in 10 Business Days

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

Upgrade your N54 engine bay with the VTT Stock Style Coil Hold Down Kit in Billet Gold.

King Bearings S65 Performance Rod Bearing Replacement Kit

T#:56218621

Part#: CR8066GPCKT2

In Stock at Vendor

$ 976.99

This product was last offered at the strikethrough price on
08-14-2026

$ 974.99 USD

Add to Wish List

Qty

$ 974.99 USD

Add to Wish List

We built this S65 Rod Bearing Refresh Kit to deliver proven reliability under severe operating conditions. Anchored by King’s Coated GPC Rod Bearings, this kit utilizes specialized polymer coatings to resist scuffing, handle elevated oil temperatures

Show More Show Less