BMW Engine Parts

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

T#:49822557

Part#: VTTBS58BLOCK

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 3 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

Genuine BMW Oil Filter Gasket - S58

T#:50898995

Part#: 11428469100

Ships in 2 Business Days

4% off MSRP $ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Qty

4% off MSRP

$ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Gemini said Seal your S58 oiling system with this filter gasket and hardware!

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 1 Business Day

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Red B58 BMW Coil Upgrade Adapter Kit - N55

T#:57086690

Part#: BMSN55CUAK-R

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Upgrade your N55 ignition system with the N55 → B58 Coil Upgrade Adapter Kit, engineered for a seamless, plug-and-play conversion. This kit lets you run modern B58-style pencil coils on your N55 without modifying the factory harness or compromising valve cover integrity.

Show More Show Less

BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit - G2X/G42/A...

T#:49822554

Part#: BMSB58OCCFCDV

Ships on Sep 1, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Keep crankcase vapors in check and your intake air clean with the BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit for the Gen2 B58. This upgrade ditches the flimsy factory venting in favor of a precision CNC-machined billet oil filler cap and dual-vent fittings engineered to handle increased crankcase pressure under boost. By diverting oil-laden vapors into a catch can instead of back through the intake, this system helps minimize carbon buildup, reduces oily contamination, and promotes more consistent performance as power levels climb. High-quality hoses and fittings ensure a secure, leak-free install that won’t collapse under pressure and maintains a clean, OE-plus appearance in the engine bay. An easy, effective upgrade for B58 enthusiasts looking for cleaner operation, improved engine longevity, and proven performance-focused design

Show More Show Less

Blue B58 BMW Coil Upgrade Adapter Kit - N55

T#:49857415

Part#: BMSN55CUAK

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Upgrade your N55 ignition system with the N55 → B58 Coil Upgrade Adapter Kit, engineered for a seamless, plug-and-play conversion. This kit lets you run modern B58-style pencil coils on your N55 without modifying the factory harness or compromising valve cover integrity. Why Upgrade: While the N55 is a reliable platform, factory coils can struggle under high boost, heat, and load. B58 coils deliver stronger, more consistent spark, and this adapter kit ensures a clean, OEM-quality integration. Features & Benefits: Direct-fit adapter harness & mounts for straightforward B58 coil installation Plug-and-play design — no cutting, splicing, or permanent modifications Secure coil seating & alignment for consistent performance and reliability Improved ignition stability under high-load or tuned conditions, helping reduce misfires Applications: Stage 1–3 N55 builds, turbo upgrades, ethanol blends, track use, and aggressive daily driving Drivers looking to eliminate heat- and boost-related ignition issues Anyone seeking an OEM+ quality coil upgrade without a messy DIY install Result: A clean, professional installation that modernizes your ignition system and delivers reliable spark performance under all conditions. If you provide the kit’s brand/part number and whether your valve cover is stock or aftermarket, I can refine this description for precise fitment and application.

Show More Show Less

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

Acoustic Cover - High-Pressure Pump

T#:53608864

Part#: 13515B940B9

In Stock

3% off MSRP $ 31.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Qty

3% off MSRP

$ 31.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Turbocharger Heat Shield - F9x

T#:56471616

Part#: 11655B4A549

Ships in 8 Business Days

6% off MSRP $ 183.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 172.99 USD

Add to Wish List

Qty

6% off MSRP

$ 183.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 172.99 USD

Add to Wish List

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

JB4PRO Flex Fuel Add On Harness - B58/S58

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

Vargas Oil Feed Adapter - BMW N54

T#:51778141

Part#: VTT-N54-OFA

In Stock

$ 41.99

This product was last offered at the strikethrough price on
08-03-2026

$ 39.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 41.99

This product was last offered at the strikethrough price on
08-03-2026

$ 39.99 USD

Limited Qty Sale

Add to Wish List

The Vargas Oil Feed Adapter is designed to replace the stock front turbo oil feed line with a robust, CNC-machined solution.

Vargas Plug And Play S58 Single HPFP Conversion Kit - BMW G8X/F9X S58...

T#:51778123

Part#: VTT-S58-SINGLE-H

In Stock

$ 349.00

This product was last offered at the strikethrough price on
07-28-2026

$ 316.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 349.00

This product was last offered at the strikethrough price on
07-28-2026

$ 316.99 USD

Limited Qty Sale

Add to Wish List

The Vargas Turbo Technologies (VTT) S58 Single HPFP Conversion Kit is a revolutionary solution for high-horsepower BMW G8X and F9X builds.

Engine Valve Cover Gasket

T#:54852024

Part#: B46.360

In Stock

Sale - Save 11% $ 48.99

This product was last offered at the strikethrough price on
08-14-2026

$ 43.79 USD

Add to Wish List

Qty

Sale - Save 11%

$ 48.99

This product was last offered at the strikethrough price on
08-14-2026

$ 43.79 USD

Add to Wish List

Keep your B46 engine running at peak efficiency and free of messy oil leaks with this premium replacement valve cover gasket from Elring.

Oil Drain Plug With 4 Crush Washers

T#:55209893

Part#: 071199631KT

In Stock

$ 2.80 USD

Add to Wish List

Qty

$ 2.80 USD

Add to Wish List

The Genuine BMW Performance Sealing Washer Kit features the foundational hardware required to complete your top-end or track-day prep correctly.

Left Outer Engine Bay Partition Kit

T#:55317666

Part#: 51757LOEBPKT

In Stock

$ 54.04 USD

Add to Wish List

Qty

$ 54.04 USD

Add to Wish List

Keep your chassis protected from track day debris and daily road grime with the Genuine BMW Outer Left Engine Bay Partition Kit.

Dipstick Tube Sealing Kit

T#:55317660

Part#: 1143DTSKT

In Stock

$ 16.08 USD

Add to Wish List

Qty

$ 16.08 USD

Add to Wish List

Keep your BMW's engine bay dry and your crankcase pressure sealed properly with this Genuine BMW lower dipstick tube sealing kit.

Shifter Rebuild Hardware Kit

T#:55209882

Part#: 07119905KT

In Stock

$ 4.80 USD

Add to Wish List

Qty

$ 4.80 USD

Add to Wish List

Intake Manifold & Sensor Seal Refresh Kit

T#:55317699

Part#: 116117IMKT

In Stock

$ 51.74 USD

Add to Wish List

Qty

$ 51.74 USD

Add to Wish List

Turner Motorsport offers this direct-fit Intake Manifold and Air Temp Sensor Seal Kit to eliminate modern vacuum leaks before they spoil your driving experience.

Oil Cooler O-Ring Kit

T#:55245835

Part#: 11421703XKT

In Stock

$ 11.20 USD

Add to Wish List

Qty

$ 11.20 USD

Add to Wish List

This Genuine BMW Oil Cooler O-Ring Kit brings together the exact factory-spec seals needed to overhaul your lines and oil thermostat assembly.

Throttle Body & Intake Gasket Kit

T#:55317667

Part#: 1161TBIPGKT

In Stock

$ 28.70 USD

Add to Wish List

Qty

$ 28.70 USD

Add to Wish List

This Throttle Body and Intake Profile Gasket Kit features a factory Genuine BMW profile gasket paired with a robust Victor Reinz throttle body housing gasket.

Throttle Body & Valve Cover Gasket Kit

T#:55317701

Part#: 1161N47TBKT

In Stock

$ 56.01 USD

Add to Wish List

Qty

$ 56.01 USD

Add to Wish List

This Turner Motorsports Gasket Kit combines the throttle body profile gasket and the valve cover gasket set into a single, track-tested maintenance bundle.

Battery Tender Plus Advanced Battery Charging System

T#:49892371

Part#: BTT0210128

Back Ordered

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Elring Actuator Gasket - R55, R56, R57, R58, R59, R60, R61

T#:54388490

Part#: 11127560273

Ships in 2 Business Days

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Leaky valvetronic actuator gaskets are a rite of passage for modern BMW owners, but they don't have to sideline your ultimate driving machine. When that factory seal gets brittle from track days and daily commutes alike, oil starts weeping down the valve cover, creating a mess and potentially fouling critical sensors.

Show More Show Less

Rod Bearing Set - Standard (48.00 Mm)

T#:55821723

Part#: 11241715701

Ships in 2 Business Days

$ 151.99 USD

Add to Wish List

Qty

$ 151.99 USD

Add to Wish List

Turbo & Intake Heat Shield - Gen2 B58

T#:49857413

Part#: BMSG2B58THS

Ships on Sep 1, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Blue B58 BMW Coil Upgrade Adapter Kit - N54

T#:49857414

Part#: BMSN54CUAK

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Modernize your N54 ignition system with this N54 to B58 Coil Upgrade Adapter Kit, engineered to deliver an OEM-quality conversion for improved spark energy and consistency. Designed to pair B58-style pencil coils with the factory N54 engine harness, this kit provides a clean, reversible installation—no cutting, splicing, or guesswork required. Key Features & Benefits: Direct-fit adapter solution to run B58 coils on N54 applications Plug-and-play wiring integrates with the factory N54 harness for a factory-like install Secure coil positioning helps ensure proper seating and reliable long-term fitment Improved ignition stability under higher cylinder pressures—ideal for tuned, higher-boost setups Clean, serviceable conversion that maintains a tidy engine bay and simplifies future maintenance Ideal For: Stock to heavily modified N54 builds Vehicles running elevated boost, ethanol blends, or upgraded turbo systems Owners looking to reduce ignition-related misfires and improve combustion consistency under load If you share the brand/part number of the kit and which coils you’re pairing it with, I can tailor the write-up to match the exact components and fitment notes.

Show More Show Less

SNEED4SPEED MINI Cooper W11 Performance Engine - Super Sport 53SSCE ...

T#:54388498

Part#: 2028215

Ships in 1 Business Day

$ 8,295.00 USD

Add to Wish List

Qty

$ 8,295.00 USD

Add to Wish List

Rebuilt performance engines that are great for the street to track level

Turbo & Intake Heat Shield - Gen1 B58

T#:49857410

Part#: BMSB58THS

Ships on Sep 1, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

VTT Turbocharger Inlet Flange - 2" Sch 10 - Garrett G25/G30/G35 ...

T#:52270239

Part#: GARING25

Ships in 10 Business Days

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Unlock the full potential of your Garrett G-Series turbocharger with the VTT-FAB Precision Inlet Flange.

Timing Cover Gasket

T#:54388514

Part#: 11127566281

In Stock at Vendor

Sale - Save 30% $ 8.99

This product was last offered at the strikethrough price on
06-16-2026

$ 6.33 USD

Add to Wish List

Qty

Sale - Save 30%

$ 8.99

This product was last offered at the strikethrough price on
06-16-2026

$ 6.33 USD

Add to Wish List

Engineered for precision and reliability under demanding conditions. Whether you are maintaining a daily driven Ultimate Driving Machine or prepping your chassis for the next track day, maintaining proper engine sealing is critical to preventing vacuum leaks and oil pressure loss.

Show More Show Less

Vargas Port Injector Block Off Blanks - BMW G8X F9X S58

T#:52164927

Part#: S58PIBLOBLANKS

Ships in 10 Business Days

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

The PFS S58 Port Injection Block-Off Kit offers a robust and reliable way to seal secondary fuel ports in the S58 intake manifold.

Water Pump & Thermostat Housing Gasket Kit

T#:55209942

Part#: 1153175KT

Ships in 3 Business Days

$ 14.29 USD

Add to Wish List

Qty

$ 14.29 USD

Add to Wish List

This Genuine BMW Coolant Pipe and Thermostat Sealing Kit features the exact factory-issued rubber O-rings needed to seal the smaller engine block water line and the main thermostat unit housing.

Vargas Billet CNC Valve Cover - Black - BMW B58 TU & Toyota A90/91 Su...

T#:51813335

Part#: VTT-B58TU-BVC-BL

Ships in 10 Business Days

$ 1,769.99 USD

Add to Wish List

Qty

$ 1,769.99 USD

Add to Wish List

While the stock plastic cover looks uninspired and degrades over time, the VTT Billet cover serves as a centerpiece for any high-end engine bay.

Vargas GC-Mid Turbocharger Upgrade - BMW B58 TU 2-port

T#:52305479

Part#: B58-GCMID-2

Ships in 10 Business Days

$ 2,409.99 USD

Add to Wish List

Qty

$ 2,409.99 USD

Add to Wish List

Engineered specifically for the B58TU 2-port platform, the VTT GC-Mid (Game Changer - Mid) focuses on volumetric efficiency and thermal management.

Accessory Drive Belt Kit

T#:55281779

Part#: 10865ACDKT

Ships in 6 Business Days

$ 34.73 USD

Add to Wish List

Qty

$ 34.73 USD

Add to Wish List

The Turner Motorsport Accessory Drive Belt Refresh Kit is the ultimate preventive maintenance package for your classic chassis.

Vargas High Flow Catch Can System - BMW G8X M2, M3, M4

T#:51918851

Part#: VTT-HFCCG8X12

Ships in 10 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

The VTT High-Flow Catch Can System is engineered specifically for high-horsepower BMW G8X builds where standard PCV systems fail to keep up.

Black Forest Industries Engine Mount - Stage 1 (Pair) - BMW E8X / E9X...

T#:50934267

Part#: BFI-BMW-E9X-M1

Ships on Sep 8, 2026

$ 302.99 USD

Add to Wish List

Qty

$ 302.99 USD

Add to Wish List

These Stage 1 mounts provide the structural rigidity needed to handle increased boost levels and higher torque loads while dampening the vibrations typical of the BMW straight-six.

Vargas Coil Hold Down Kit - Clear Coat - BMW N54

T#:51918877

Part#: VTT-N54CBRAW

Ships in 10 Business Days

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

Upgrade your N54 engine bay with the VTT Stock Style Coil Hold-Down Kit, the ultimate marriage of form and function.

VTT GC-Lite 2.0 Stock Location Turbocharger - Black - BMW N54 335i ...

T#:52270256

Part#: GCLI335LHDBLK

Ships in 10 Business Days

$ 2,619.99 USD

Add to Wish List

Qty

$ 2,619.99 USD

Add to Wish List

The VTT N54 GC-Lite 2.0 is the solution for BMW 335i owners seeking a massive jump in power without sacrificing the rapid response of the factory setup.

Vargas High Flow Catch Can System - BMW F9X X3M, X4M

T#:51918845

Part#: VTT-HFCCF9X16

Ships in 10 Business Days

$ 649.00 USD

Add to Wish List

Qty

$ 649.00 USD

Add to Wish List

The Vargas High-Flow -16 Catch Can System is an essential for high-horsepower BMW X3M and X4M owners looking to manage crankcase pressure and oil blow-by.

VTT B58 Cylinder Head Port Check Valve Kit - B58 Gen1/2/3 (B58/B58TU/...

T#:49822558

Part#: VTTB58CHECK

Ships in 10 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The VTT B58 Head Port Check Valve Kit is designed to convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. VTT's Billet Check Valve kit converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.

Show More Show Less

Vargas Billet CNC Valve Cover - Silver - BMW B58 TU & Toyota A90/91 S...

T#:51813332

Part#: VTT-B58TU-BVC-SI

Ships in 10 Business Days

$ 1,769.99 USD

Add to Wish List

Qty

$ 1,769.99 USD

Add to Wish List

The Vargas B58 TU Billet Valve Cover is the ultimate engine bay centerpiece for the A90 Supra and G-Series BMW enthusiast.

Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, ...

T#:52094591

Part#: VTT-FAB-062

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.