Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Goldenwrench Supply Co - Corporate Logo
T#:641289
Part#: FXXCET-R
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Coolant Expansion Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired red color. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Coolant Expansion Tank Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 engine with the large coolant tank found in the following vehicles E90/E91/E92 M3 LCI, F22 M235i, F87 M2/M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more (check your coolant cap ensuring that it is the same shape as seen in the product photos). Each kit comes with a Billet Coolant Expansion Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:641286
Part#: FXXOCC-R
In Stock
$ 60.00 USD
Free Shipping
$ 60.00 USD
Free Shipping
Give the plain plastic factory oil cap unit an upgrade with the brand new BLACKLINE Performance Billet Oil Cap Cover. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired red color. Featuring an all new Drip G logo, with the BLACKLINE insignia engraved in the cap handle with a reminder to fill the engine with Synthetic Oil Only. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Oil Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 with the round shaped oil cap found in the following vehicles E90/E91/E92 M3 LCI, F22 M235i, F87 M2/M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more (check your oil cap ensuring that it is the round shape as seen in the product photos). Each kit comes with a Billet Oil Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Oil Cap Cover affixes to the top of your factory oil cap installing easily in minutes.
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:641287
Part#: FXXCCT-R
In Stock
$ 52.00 USD
Free Shipping on orders $49 and up
Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Charge Cooler Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired red color. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Charge Cooler Reservoir Cap Cover will fit most BMW vehicles equipped with the S55 and S63 engines with the charge cooler reservoir tank found in the following vehicles: F87 M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more. Check your coolant cap ensuring that it is the same shape as seen in the product photos. Each kit comes with a Billet Charge Cooler Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:5691134
Part#: FXXOCC-B
In Stock
$ 60.00 USD
Free Shipping
$ 60.00 USD
Free Shipping
Give the plain plastic factory oil cap unit an upgrade with the brand new BLACKLINE Performance Billet Oil Cap Cover. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired blue color. Featuring an all new Drip G logo, with the BLACKLINE insignia engraved in the cap handle with a reminder to fill the engine with Synthetic Oil Only. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Oil Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 with the round shaped oil cap found in a variety of vehicles(check your oil cap ensuring that it is the round shape as seen in the product photos). Each kit comes with a Billet Oil Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Oil Cap Cover affixes to the top of your factory oil cap installing easily in minutes.
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:5802164
Part#: S58ECS-R
In Stock
$ 178.00 USD
Free Shipping
$ 178.00 USD
Free Shipping

BMW S58 Blackline Performance Edition Red Cap Set introduces a stylish upgrade for the factory oil and coolant caps on BMW M vehicles. Meticulously designed and crafted to the highest standards, this cap set enhances the look of your engine bay with a race-inspired red finish.

  • Premium Materials: Each cap is CNC machined from T6 aluminum and anodized in a striking red color for a sleek, race-inspired appearance.
  • Precision Detailing: Logos and decorations are applied through a precision 3D milling process, providing a high-quality, premium finish.
  • Easy Installation: The billet cap covers easily affix to the top of the factory caps, allowing for quick and straightforward installation.
  • Exclusive Fitment: Designed specifically for BMW vehicles equipped with the S58 engine, including models like the F97 X3M, F98 X4M, G80 M3, and G82 M4.
  • Enhanced Aesthetics: Upgrades the plain plastic factory caps with a sophisticated and visually appealing design.
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:7244442
Part#: FXXOFH-R
Ships in 4 Business Days
$ 147.00 USD
Free Shipping
$ 147.00 USD
Free Shipping
OEM factory oil filter housing caps are made of plastic which can be prone to failure over time. Bring form, function and design to your engine with GoldenWrench's highly anticipated 2022 product release. Introducing the BLACKLINE Performance RED Billet Oil Filter Housing Cap which is designed to increase the functioning longevity and improve aesthetics over the factory plastic part while offering superior built in maintenance features.
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:3586293
Part#: FXXWFCR
In Stock
$ 47.00 USD
Free Shipping on orders $49 and up
Full replacement Billet Washer Fluid Cap for BMW F Series vehicles!

Goldenwrench Supply Co - Corporate Logo
T#:5691129
Part#: FXXCET-B
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Coolant Expansion Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired blue color. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Coolant Expansion Tank Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 engine with the large coolant tank found in a variety of M vehicles(check your coolant cap ensuring that it is the same shape as seen in the product photos). Each kit comes with a Billet Coolant Expansion Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:7355611
Part#: FXXWFC-B
In Stock
$ 47.00 USD
Free Shipping on orders $49 and up

BMW F30 Blackline Washer Fluid Cap Performance - Motorsport Blue

The BMW F30 Blackline Washer Fluid Cap Performance - Motorsport Blue offers a premium upgrade for BMW F Series vehicles. This high-quality billet washer fluid cap features a no-spill seal technology, addressing common issues with washer fluid leakage from the factory reservoir. Designed and manufactured with precision, this cap replaces the factory unit with a stylish and functional enhancement.

Benefits:

  • No-Spill Seal Technology: Prevents leakage from the factory washer fluid reservoir.
  • Premium Construction: CNC machined from T6 Aluminum for durability and strength.
  • Eye-Catching Design: Anodized in Motorsport Blue for a striking appearance.
  • Precision Finish: Logos and details are 3D milled for a refined look.
  • Easy Installation: Direct replacement for the factory cap, installs in minutes.
  • Wide Compatibility: Fits most BMW F Series models (check the application guide).
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:641268
Part#: FXXOCC
In Stock
$ 60.00 USD
Free Shipping
$ 60.00 USD
Free Shipping
Give the plain plastic factory oil cap unit an upgrade with the brand new BLACKLINE Performance Billet Oil Cap Cover. Each cap is CNC formed from T6 Aluminum and anodized with an Anthracite Gray color to compliment the factory engine cover. Featuring an all new Drip G logo, with the BLACKLINE insignia engraved in the cap handle with a reminder to fill the engine with Synthetic Oil Only. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Oil Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 with the round shaped oil cap found in the following vehicles E90/E91/E92 M3 LCI, F22 M235i, F87 M2/M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more (check your oil cap ensuring that it is the round shape as seen in the product photos). Each kit comes with a Billet Oil Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Oil Cap Cover affixes to the top of your factory oil cap installing easily in minutes.
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:7750497
Part#: G8XWFC-R
In Stock
$ 47.00 USD
Free Shipping on orders $49 and up
Introducing the full replacement Billet Washer Fluid Cap for BMW G8x M3/M4! Built-in with a no spill seal technology to solve for the leaking of washer fluid from the factory washer fluid reservoir. These are the most complex Goldenwrench pieces created to date. Meticulously designed and created in-house to the highest precision and quality seen on our other products replacing the factory unit with an all-new form factor. We bring to you the newest addition to the BLACKLINE Performance product line for BMW G8x M3/M4. Give the plain plastic factory cap an upgrade with our brand new BLACKLINE Performance Washer Fluid Cap. Each cap is CNC formed from T6 Aluminum and anodized with a Motorsport Red color. All logos and decorations are finalized through our precision 3D milling process, machined into each cap for the ultimate premium finish. Each kit comes with the Billet Washer Fluid Cap, and an Installation Instruction Card. This is a full replacement unit getting rid of the factory cap installing easily in minutes.
Show More Show Less


Goldenwrench Supply Co - Corporate Logo
T#:5691131
Part#: FXXCCT-B
In Stock
$ 52.00 USD
Free Shipping on orders $49 and up
Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Charge Cooler Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized in a limited release race inspired blue color. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Charge Cooler Reservoir Cap Cover will fit most BMW vehicles equipped with the S55 and S63 engines with the charge cooler reservoir tank found in a variety of M Vehicles. Check your coolant cap ensuring that it is the same shape as seen in the product photos. Each kit comes with a Billet Charge Cooler Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:5802170
Part#: S58ECS-B
In Stock
$ 178.00 USD
Free Shipping
$ 178.00 USD
Free Shipping

BMW G8X S58 3.0L Blackline Performance Motorsport Blue Cap Set provides a premium upgrade for the engine bay of BMW's latest M vehicles. Designed with meticulous attention to detail, this cap set elevates the appearance of factory oil and coolant caps to a motorsport-inspired look. Each cap is CNC machined from T6 aluminum and finished with a striking Motorsport blue anodize, perfectly complementing the factory engine cover.

  • High-Quality Construction: CNC machined from T6 aluminum for durability and precision.
  • Distinctive Design: Anodized in Motorsport blue for a striking, high-end look.
  • Precision Finish: Logos and decorations are precision 3D milled for a premium finish.
  • Easy Installation: Billet cap covers affix directly to factory caps for a simple upgrade.
  • Compatibility: Designed specifically for BMW S58 engine models, including the F97 X3M, F98 X4M, G80 M3, and G82 M4.

Please note that these caps are not full replacements but cover the existing factory caps. Installation is straightforward and can be completed in minutes.

Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:9901260
Part#: FXXOFH-G
In Stock
$ 147.00 USD
Free Shipping
$ 147.00 USD
Free Shipping

BMW Gray Filter Housing Cap - Blackline Performance Edition Oil is a premium upgrade designed to replace the standard OEM plastic oil filter housing cap. This high-quality billet aluminum cap enhances both the aesthetics and functionality of your BMW's engine.

  • Durable Construction: Made from 6061 T6 aluminum with a hard anodized finish for superior strength and longevity.
  • Improved Performance: Features better heat dissipation compared to the factory plastic cap, enhancing engine performance and reliability.
  • Enhanced Aesthetics: Adds a sleek, high-performance look to your engine bay with 3D precision post-milled detailing and the G Insignia Oil Filter Cage Stabilizer.
  • Easy Installation: CNC-formed hand grips and a 10mm Allen key maintenance port with a built-in scratch plate simplify the installation and maintenance process.
  • Direct Replacement: Retains the factory oil filter stalk and is compatible with BMW S55 and most N series engines using BMW part 11427525334.
  • Increased Longevity: Designed to increase the life span of your oil filter cap and provide a more reliable seal.
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:797049
Part#: FXXFCC
Ships in 4 Business Days
$ 47.00 USD
Free Shipping on orders $49 and up
$ 47.00 USD
Free Shipping on orders $49 and up
Give your gas cap a much-needed upgrade with the all new BMW M Car Series Billet Aluminum Fuel Cap Cover from Goldenwrench Supply Co. This performance Fuel Cap Cover Kit comes with a Billet Aluminum Fuel Cap Cover, and Installation Instructions. Please note this a cover that affixes on top of your factory fuel cap installing easily in minutes.
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:11366500
Part#: FXXOFH-B
In Stock
$ 147.00 USD
Free Shipping on orders $49 and up
OEM factory oil filter housing caps are made of plastic which can be prone to failure over time. Bring form, function and design to your engine with GoldenWrench's highly anticipated 2022 product release. Introducing the BLACKLINE Motorsport Blue Billet Oil Filter Housing Cap which is designed to increase the functioning longevity and improve aesthetics over the factory plastic part while offering superior built in maintenance features.
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:6635763
Part#: FXXFCC-B
In Stock
$ 47.00 USD
Free Shipping on orders $49 and up
$ 47.00 USD
Free Shipping on orders $49 and up
Give your gas cap a much-needed upgrade with the all new BMW M Car Series Billet Aluminum Fuel Cap Cover from Goldenwrench Supply Co. This performance Fuel Cap Cover Kit comes with a Billet Aluminum Fuel Cap Cover, and Installation Instructions. Please note this a cover that affixes on top of your factory fuel cap installing easily in minutes.
Show More Show Less

Mishimoto - Corporate Logo
T#:380389
Part#: MMOCF-BMW
In Stock
$ 88.99 USD
Free Shipping
$ 88.99 USD
Free Shipping
Install a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Features: Allows for use of -10AN fittings for custom oil cooler setup 100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate Includes durable stock BMW O-rings for leak-free installation Provides additional engine bay space for applications with an oil accumulator or supercharger setup Included as part of the Mishimoto BMW E46 M3 Oil Cooler Kit Mishimoto Lifetime Warranty Included: (1) Stainless Steel Fitting Clamp (2) -10AN Fittings (2) BMW Oil O-rings (1) M8 x 1.25 x 25mm Button-Head Bolt Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov. ​
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:10486187
Part#: G8XWFC-B
In Stock
$ 47.00 USD
Free Shipping on orders $49 and up
Introducing the full replacement Billet Washer Fluid Cap for BMW G8x M3/M4! Built-in with a no spill seal technology to solve for the leaking of washer fluid from the factory washer fluid reservoir. These are the most complex Goldenwrench pieces created to date. Meticulously designed and created in-house to the highest precision and quality seen on our other products replacing the factory unit with an all-new form factor. We bring to you the newest addition to the BLACKLINE Performance product line for BMW G8x M3/M4. Give the plain plastic factory cap an upgrade with our brand new BLACKLINE Performance Washer Fluid Cap. Each cap is CNC formed from T6 Aluminum and anodized with the Motorsport Blue color. All logos and decorations are finalized through our precision 3D milling process, machined into each cap for the ultimate premium finish. Each kit comes with the Billet Washer Fluid Cap, and an Installation Instruction Card. This is a full replacement unit getting rid of the factory cap installing easily in minutes.
Show More Show Less

Mishimoto - Corporate Logo
T#:597051
Part#: MMOCCLA
In Stock
$ 127.99 USD
Free Shipping
$ 127.99 USD
Free Shipping
WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less

Mishimoto - Corporate Logo
T#:637363
Part#: MMBCC-F80-15CBE
In Stock
$ 306.99 USD
Free Shipping
$ 306.99 USD
Free Shipping
Give your 2015–2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition—blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Two aluminum, 3/4” barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either. *After installation, Mishimoto recommends checking the contents of the baffled catch cans every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle* Features: Direct fit for the 2015–2020 F8X BMW M3 and M4 Single can mounts in line with the CCV system to separate oil from air using a 50-micron bronze filter Helps reduce carbon buildup on intake valves Patent-pending billet 6061 aluminum can sealed with Viton™ O-rings Installs in under 30 minutes Robust CNC-machined anodized aluminum bracket mounts the can in a serviceable location Includes pre-molded hoses for simplified installation Defends Vanos system and essential engine components from oil blow-by CNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can Catch can has a 3 oz. capacity for longer servicing intervals Internal air diverter increases air turbulence to improve oil separation Helps maintain proper octane levels to reduce potential detonation Filter and can are fully serviceable Mishimoto Lifetime Warranty Included: (1) Compact Baffled Oil Catch Can (1) Application-Specific Mounting Bracket (2) Direct-Fit Hoses (2) 3/4" Aluminum Barbed Fittings (4) Worm Gear Clamps Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:641288
Part#: FXXCET
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Coolant Expansion Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized with an Anthracite Gray color to compliment the factory engine cover. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Coolant Expansion Tank Cap Cover will fit most BMW vehicles equipped with the N55, S55, S63, and S65 engine with the large coolant tank found in the following vehicles E90/E91/E92 M3 LCI, F22 M235i, F87 M2/M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more (check your coolant cap ensuring that it is the same shape as seen in the product photos). Each kit comes with a Billet Coolant Expansion Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.
Show More Show Less
Mishimoto - Corporate Logo
T#:637357
Part#: MMOC-F80-15
Ships in 3 Business Days
$ 609.99

This product was last offered at the strikethrough price on
08-13-2026

$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping
Add some much-needed durability and cooling power to your M3 or M4 with the Mishimoto 2015-2020 BMW M3/M4 Oil Cooler. True to form, the engineers at BMW designed the M3/M4’s oil cooler with efficient use of space in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer’s aerodynamics in order to cool the oil, all while putting the lightweight, tube-and-fin cooler in harm's way of road hazards. We here at Mishimoto made sure to beef up the oil cooler design for the F80/82 with our performance oil cooler. We ditched the lightweight design for a full aluminum, TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris, keeping your oil temps down, and where it should be. We also added 10mm to the core’s thickness, equating in a 46% increase in core volume, and increased the oil capacity by .4 qt. The Mishimoto 2015-2020 BMW M3/M4 Oil Cooler fits directly in place of the stock unit, and includes the Mishimoto Lifetime Warranty for a simplified and worry-free installation. Features: Direct fit for the 2015–2020 BMW F8X M3, M4, and M2 Competition Full aluminum TIG-welded construction 46% increase in core volume Increases oil capacity by .44 quarts Robust bar-and-plate construction for improved durability and heat rejection Silver powder-coated finish for maximum protection No cutting or modifications required Mishimoto Lifetime Warranty Included: (1) Performance Oil Cooler (2) Replacement O-Rings Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less


Active Autowerke Power Pulley Kit - E9x M3
For vehicles with production date 2007-5/2008
Active Autowerke - Corporate Logo
T#:397285
Part#: 13-001
Ships in 3 Business Days
5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD
Free Shipping
5% off MSRP
$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD
Free Shipping
Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.
Show More Show Less
Mishimoto - Corporate Logo
T#:372557
Part#: MMOCCCF
In Stock
$ 162.99 USD
Free Shipping
$ 162.99 USD
Free Shipping
Universal kit with a catch can and rubber hose; for retrofitting on a variety of vehicles. Carbon fiber catch can prevents a harmful buildup of oil inside of the turbocharger, intake manifold, intercooler and piping. Separates oil particles from PCV/CCV air Defends intercooler, intake system, and essential components from oil blow-by Made from lightweight carbon fiber Compact design makes for easy engine bay placement Checking fluid levels made easy with built in sight tube Comes complete with mounting bracket, hose, all necessary clamps, fittings, and mounting hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39971047
Part#: BM-0007
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

Goldenwrench Supply Co - Corporate Logo
T#:5229441
Part#: E9XWFC-R
In Stock
$ 47.00 USD
Free Shipping on orders $49 and up
Introducing the full replacement Billet Washer Fluid Cap for BMW E9X (3 Series) vehicles! Built-in with a no spill seal technology to solve for the leaking of washer fluid from the factory washer fluid reservoir. These are Goldenwrench's most complex pieces created to date. Meticulously designed and created in-house to the highest precision and quality seen on their other products replacing the factory unit with an all-new form factor. We bring to you the newest addition to the BLACKLINE Performance product line for BMW E9X (3 Series) vehicles.
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:8997689
Part#: G8XWFC-G
In Stock
$ 47.00 USD
Free Shipping on orders $49 and up
Introducing the full replacement Billet Washer Fluid Cap for BMW G8x M3/M4! Built-in with a no spill seal technology to solve for the leaking of washer fluid from the factory washer fluid reservoir. These are the most complex Goldenwrench pieces created to date. Meticulously designed and created in-house to the highest precision and quality seen on our other products replacing the factory unit with an all-new form factor. We bring to you the newest addition to the BLACKLINE Performance product line for BMW G8x M3/M4. Give the plain plastic factory cap an upgrade with our brand new BLACKLINE Performance Washer Fluid Cap. Each cap is CNC formed from T6 Aluminum and anodized with a Motorsport Gray color. All logos and decorations are finalized through our precision 3D milling process, machined into each cap for the ultimate premium finish. Each kit comes with the Billet Washer Fluid Cap, and an Installation Instruction Card. This is a full replacement unit getting rid of the factory cap installing easily in minutes.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39971051
Part#: BM-0032
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
A premium dry carbon fiber engine bay upgrade that enhances the performance styling of compatible BMW models with a sleek, UV-resistant finish and easy OEM-style installation.

Goldenwrench Supply Co - Corporate Logo
T#:4565848
Part#: FXXWFCG
Ships in 4 Business Days
$ 47.00 USD
Free Shipping on orders $49 and up
Full replacement Billet Washer Fluid Cap for BMW F Series vehicles!
Goldenwrench Supply Co - Corporate Logo
T#:641290
Part#: FXXCCT
In Stock
$ 52.00 USD
Free Shipping on orders $49 and up
Give the plain plastic factory coolant caps an upgrade with the brand new BLACKLINE Performance Charge Cooler Tank Cap Cover from Goldenwrench. Each cap is CNC formed from T6 Aluminum and anodized with an Anthracite Gray color to compliment the factory engine cover. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Charge Cooler Reservoir Cap Cover will fit most BMW vehicles equipped with the S55 and S63 engines with the charge cooler reservoir tank found in the following vehicles: F87 M2 Competition, F80 M3, F82 M4, F10/F90 M5, and more. Check your coolant cap ensuring that it is the same shape as seen in the product photos. Each kit comes with a Billet Charge Cooler Tank Cap Cover, and an Installation Instruction Card. This is a not a full cap replacement. The Billet Cap Cover affixes to the top of your factory coolant cap installing easily in minutes.
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:6460296
Part#: S58ECS-G
Ships in 4 Business Days
$ 178.00 USD
Free Shipping
$ 178.00 USD
Free Shipping
Each cap is CNC formed from T6 Aluminum and anodized with the signature grey color to compliment the factory engine cover. All logos and decorations are finalized through a precision 3D milling process, machined into each cap for the ultimate premium finish.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:46203538
Part#: ATK-BM-0408-V2
Ships in 7 Business Days
$ 795.00 USD
Free Shipping on orders $49 and up
Transform your G8X engine bay into a true centerpiece with the AutoTecknic Version II Dry Carbon Fiber Engine Cover. Expertly crafted using pre-preg dry carbon and cured in an autoclave, this cover offers a lightweight yet durable upgrade that elevates both performance and aesthetics. The precision 3K twill weave carbon delivers a flawless, uniform pattern, enhanced by a deep gloss UV-resistant clear coat for long-lasting protection against fading and yellowing. What sets this Version II cover apart is the bold tri-colored ///M-inspired stripes, perfectly integrated into the design. Combined with the iconic ///M emblem, the cover captures BMW’s motorsport heritage while adding a modern, aggressive edge to your engine bay. Every detail is engineered for a seamless OEM fit—simply transfer the factory M emblem for a complete installation. Upgrade your G80 M3 or G82/ G83 M4 with this stunning centerpiece and let your engine bay reflect the same dynamic spirit as the car itself.
Show More Show Less
OMP - Corporate Logo
T#:1614
Part#: EA-462
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39971046
Part#: BM-0006-BCG
In Stock
$ 65.00 USD
Free Shipping on orders $49 and up
AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.
Show More Show Less


Goldenwrench Supply Co - Corporate Logo
T#:53820895
Part#: S54OCCS
In Stock
New Item
$ 118.99

This product was last offered at the strikethrough price on
05-15-2026

$ 83.00 USD
Free Shipping on orders $49 and up
$ 83.00 USD
Free Shipping on orders $49 and up
Designed for Seamless Integration the Heritage Motorsport Oil Cap provides a Solid Aluminum Replacement for Aging Plastic units
Mishimoto - Corporate Logo
T#:31092530
Part#: MMODP1615B
Ships in 3 Business Days
$ 22.99 USD
Free Shipping on orders $49 and up

MINI R55 to R61 Magnetic Engine Oil Drain Plug M16X1.5 removes abrasive metal particles from drivetrain fluid to ensure longevity. The magnet attracts and holds minute abrasive and ferrous metal particles, preventing their circulation through lubrication systems. Metal particles can appear in lubricating or hydraulic systems due to normal wear, machining residues, sub-surface casting flaws, and stress usage. Mishimoto Drain Plugs help prevent excessive wear to internal components by holding these particles.

  • Enhanced Engine Protection: Removes metal particles to reduce wear
  • Magnetic Attraction: Holds abrasive and ferrous particles securely
  • Improved Lubrication: Prevents circulation of harmful particles
  • Durable Construction: Built to last and withstand harsh conditions
  • Easy Installation: Simple to replace with standard drain plug

Safety Note: This product may be subject to Proposition 65, a California law requiring warnings for products containing chemicals known to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto - Corporate Logo
T#:383384
Part#: MMBCCN5406CBE
In Stock
$ 253.99 USD
Free Shipping
$ 253.99 USD
Free Shipping
Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media and chemical blasting of the intake valves to strip away the oily buildup we have seen. Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine. The Mishimoto Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles. This item fits the following BMWs with the N54 twin-turbo engine: 2008-2010 E82 E88 BMW 135i 2007-2010 E9X BMW 335i 335xi 2006-2010 E60 BMW 535i 535xi WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less

Mishimoto - Corporate Logo
T#:378421
Part#: MMOCU
In Stock
$ 410.99 USD
Free Shipping
$ 410.99 USD
Free Shipping
This universal oil cooler from Mishimoto is far superior to the factory unit with its 11" x 2.76" x 1.97" core. Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes 4 feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Mishimoto Automotive is a leading manufacturer of aftermarket performance cooling products. The company was established back in 2003 with one goal. That goal was to provide customers with quality cooling system upgrades that work on the track and on the road. At Mishimoto, you never have to worry about the quality of the product you are installing. This kit is universal and is not a direct bolt on. *For custom applications only. Not a direct bolt on. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Mishimoto - Corporate Logo
T#:23020165
Part#: MMBCC-CBTWO
In Stock
$ 160.99 USD
Free Shipping on orders $49 and up

Optimize your vehicle's performance and shield crucial components with the Mishimoto Compact 2-Port Baffled Oil Catch Can. This innovative solution effectively separates oil particles from PCV/CCV air using a 50-micron bronze filter, ensuring defense against oil blow-by for your intercooler, intake system, and vital parts. Constructed with a patented billet 6061 aluminum can sealed with Viton™ O-Rings, this catch can guarantees both durability and effectiveness.

Equipped with a universal mounting bracket, it allows adaptable installation and comes complete with two CNC-machined aluminum 1/2" barbed hose fittings. With an enhanced 3 oz internal capacity, service intervals are prolonged, while its fully serviceable filter and can ensure enduring functionality.

Engineered for safety in pressurized applications, the internal air diverter enhances oil separation by amplifying air turbulence. Available in black, red, or polished finishes, this catch can preserves proper octane levels, reducing potential detonation and promoting extended engine life.

The product package includes the Compact 2-Port Baffled Oil Catch Can, two Aluminum 1/2" Barbed Fittings, and a Universal Mounting Bracket, all backed by the Mishimoto Lifetime Warranty.

WARNING! Prop 65 may apply to this product.

Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California.

Prop 65 mandates listing any chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.

For more information about California Prop 65 warning, visit: www.P65Warnings.ca.gov.

Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:8123165
Part#: E9XWFC-B
Ships in 4 Business Days
$ 47.00 USD
Free Shipping on orders $49 and up
Introducing the full replacement Billet Washer Fluid Cap for BMW E9x vehicles! Built-in with a no spill seal technology to solve for the leaking of washer fluid from the factory washer fluid reservoir. These are the most complex Goldenwrench pieces created to date. Meticulously designed and created in-house to the highest precision and quality seen on our other products replacing the factory unit with an all-new form factor. We bring to you the newest addition to the BLACKLINE Performance product line for BMW E9x vehicles. Give the plain plastic factory cap an upgrade with our brand new BLACKLINE Performance Washer Fluid Cap. Each cap is CNC formed from T6 Aluminum and anodized with a Motorsport Blue color. All logos and decorations are finalized through our precision 3D milling process, machined into each cap for the ultimate premium finish. The BLACKLINE Performance Billet Washer Fluid Cap will fit most BMW E9x model cars (please see application guide below). Each kit comes with the Billet Washer Fluid Cap, and an Installation Instruction Card. This is a full replacement unit getting rid of the factory cap installing easily in minutes.
Show More Show Less
Goldenwrench Supply Co - Corporate Logo
T#:3121419
Part#: F5XECS
Ships in 4 Business Days
$ 107.00 USD
Free Shipping
$ 107.00 USD
Free Shipping

Goldenwrench Supply Co - Corporate Logo
T#:30364175
Part#: FXXOFH
Ships in 4 Business Days
$ 147.00 USD
Free Shipping on orders $49 and up
Replace your factory plastic oil filter housing cap, which is prone to failure over time, with the BLACKLINE Performance BMW F Series Billet Oil Filter Housing Cap. This upgrade enhances the form, function, and design of your engine bay. Designed to outlast and improve upon the stock plastic part, this cap also offers superior built-in maintenance features. Meticulously designed and manufactured in-house with a completely new form factor, the cap provides significant functional and design improvements over the original. Each cap is CNC-machined from T6 aluminum and finished with a hard anodized coating in our signature anthracite grey color. The precision post-3D milling process engraves all text decorations, ensuring a premium finish. The BLACKLINE Performance Billet Oil Filter Housing Cap is compatible with most BMW F series vehicles equipped with S55 and most N Series engines that use BMW Part 11427525334, including the OG M2, M2 Competition, M3, M4, and many others. Each kit includes a Billet Oil Filter Cap and an Installation Instruction Card. This is a plug-and-play full replacement unit. Upgrade your engine's performance and appearance with this essential enhancement.
Show More Show Less

Active Autowerke - Corporate Logo
T#:397307
Part#: 12-032
Ships in 3 Business Days
$ 240.00 USD
Free Shipping
$ 240.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml). 
Show More Show Less
Mishimoto - Corporate Logo
T#:363342
Part#: MMOCE4601
In Stock at Vendor
$ 1,032.99 USD
$ 1,032.99 USD
The S54 is an incredible feat of engineering. Smooth power delivery, individual throttle bodies, and an 8,000 rpm redline make for an unforgettable driving experience. As with any BMW, maintaining optimal oil temperatures is key to extending the life of your vehicle and ensuring that you're getting an unparalleled driving experience. As many of these vehicles see frequent track time, the team at Mishimoto decided to develop a performance oil cooler kit that would provide improved durability and deliver the power needed for track driving. The result: an extremely efficient core with a proven 30°F (16.7°C) drop in oil temperature. With an increase in core thickness of 110%, this oil cooler kit raises your oil capacity by 0.44 qt. The oil cooler end tanks, cast from a single piece of aluminum and TIG-welded to the core, have been designed for maximum reliability, giving you the confidence you need to push your E46 M3 to the limits.
Show More Show Less
Mishimoto - Corporate Logo
T#:389788
Part#: MMBCCN20N2612CB
In Stock at Vendor
$ 278.95 USD
Free Shipping
$ 278.95 USD
Free Shipping
il venting and circulation continues to be a problem on BMW engines and the N20 engine is not immune from this. The existing stock system does a poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. Performance issues are caused by oil sneaking by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media and chemical blasting of the intake valves to strip away the oily buildup we have seen. Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine. The Mishimoto Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles. This item fits the following BMWs with the N20 or N26 turbo engine: 2014-2016 F2X 228i 228i xDrive 2012-2016 F3X 320i 320i xDrive 328i 328i xDrive 428i 428i xDrive WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less


Mishimoto - Corporate Logo
T#:6258386
Part#: MMOC-F10-12SL
In Stock at Vendor
$ 887.99 USD
Free Shipping
$ 887.99 USD
Free Shipping
The BMW M5 power and handling statistics are completely mind-blowing for a car tipping the scales at well over two tons. The S63 twin-turbo V8 is underrated from the factory and responds well to tuning and bolt on modifications. Calling it the ultimate super sedan would not do this car justice, it’s just that good. But every amazing automobile must have an Achilles’ heel, right? Some investigation into this model told us that enthusiasts were seeing elevated oil temperatures during track driving conditions. Our team set out to create a replacement, high-performance oil cooler that could handle the rigors of extreme driving conditions and the abuse of daily commuting. The Mishimoto S63 M5/M6 oil cooler features extremely precise CNC-machined billet-aluminum end tanks which are professionally TIG-welded to our robust bar-and-plate core. Our strategically designed 55mm-thick core provides a massive 24% increase in core volume, and a 40% increase in external fin surface area. This added surface area promotes greater heat transfer, which directly impacts internal fluid temperatures. Our performance oil cooler is a complete bolt-on solution that includes everything needed for an easy installation such as hardware and replacement O-rings for the oil lines. Our heat exchanger is finished in a durable silver powder coat, providing both corrosion resistance and improved aesthetics. Whether your M5 sees frequent track time or just the occasional back-road jaunt, upgrading the oil cooler is a great way to extend the life of your S63 and ensure maximum engine output when you need it most. As with all our BMW products, this oil cooler includes our signature Mishimoto Lifetime Warranty. Direct fit for 2012+ BMW M5/M6 models CNC-machined billet aluminum end tanks provide improved durability over stock stamped tanks Robust bar-and-plate core resists damage from road debris and provides optimal cooling efficiency 24% increase in core volume over stock for improved cooling capacity 40% increase in external fin area provides improved heat transfer during extreme driving conditions Precision CNC-machined inlet and outlet prevent leaks Includes new OEM-quality oil line O-rings for easy installation Durable silver powder coated finish prevents corrosion Mishimoto Lifetime Warranty Purchase Includes: (1) Performance Oil Cooler (4) Mounting Bracket Grommets (2) Oil Line Connection M8 X 1.25 Bolts (2) Oil Line O-rings Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov. The Mishimoto S63 M5/M6 oil cooler features extremely precise CNC-machined billet-aluminum end tanks which are professionally TIG-welded to our robust bar-and-plate core. Our strategically designed 55mm-thick core provides a massive 24% increase in core volume, and a 40% increase in external fin surface area. This added surface area promotes greater heat transfer, which directly impacts internal fluid temperatures. Our performance oil cooler is a complete bolt-on solution that includes everything needed for an easy installation such as hardware and replacement O-rings for the oil lines. Our heat exchanger is finished in a durable silver powder coat, providing both corrosion resistance and improved aesthetics. Whether your M5 sees frequent track time or just the occasional back-road jaunt, upgrading the oil cooler is a great way to extend the life of your S63 and ensure maximum engine output when you need it most. As with all our BMW products, this oil cooler includes our signature Mishimoto Lifetime Warranty. Direct fit for 2012+ BMW M5/M6 models CNC-machined billet aluminum end tanks provide improved durability over stock stamped tanks Robust bar-and-plate core resists damage from road debris and provides optimal cooling efficiency 24% increase in core volume over stock for improved cooling capacity 40% increase in external fin area provides improved heat transfer during extreme driving conditions Precision CNC-machined inlet and outlet prevent leaks Includes new OEM-quality oil line O-rings for easy installation Durable silver powder coated finish prevents corrosion Mishimoto Lifetime Warranty Purchase Includes: (1) Performance Oil Cooler (4) Mounting Bracket Grommets (2) Oil Line Connection M8 X 1.25 Bolts (2) Oil Line O-rings Mishimoto Lifetime Warranty
Show More Show Less
Mishimoto - Corporate Logo
T#:15544955
Part#: MMOC-G80-21SL
In Stock at Vendor
$ 776.99 USD
Free Shipping on orders $49 and up
Keep your 2021+ BMW M3/M4 cool and collected with the Mishimoto 2021+ BMW M3/M4 performance oil cooler. Much like their predecessors, the G8X M3 and M4 were designed with efficiency in mind. This can be a double-edged sword, as the optimally arranged engine bay has components placed in precarious positions. Most notably, the oil cooler is placed on the undercarriage, parallel to the road's surface. This placement increases air flow and uses aerodynamics to pull air through the core, but it also makes the stock cooler vulnerable to scrapes, bumps, and other road hazards. With this in mind, the engineers at Mishimoto set out to design a robust G8X oil cooler to keep your M3 or M4 running cool on and off the track. We started by swapping the stock tube-and-fin cooler for a bar-and-plate with CNC-machined end tanks. Our cooler boasts a 35.7-percent thicker core and a 41-percent increase in core volume for superior cooling efficiency. Our cooler fits directly in place of the stock unit and retains the stock seals and bash guards for optimal airflow and additional protection. The Mishimoto performance oil cooler for the 2021+ BMW G8X M3/M4 includes everything needed for installation and, as with all Mishimoto products, it's protected by the Mishimoto Lifetime Warranty for a lifetime of protection and cooling. Product Features: Direct fit for the 2021+ BMW G8X M3/M4 Full aluminum TIG-welded construction 41-percent increase in core volume and 35.7-percent thicker core than stock for improved cooling efficiency Robust bar-and-plate core provides superior pressure tolerance and durability Retains stock seals for optimal air flow from fresh air ducts Retains bash guards to protect cooler from bumps and curbs Silver powder coated finish for maximum corrosion resistance No cutting or modifications required Includes everything needed for installation Mishimoto Lifetime Warranty
Show More Show Less