BMW Engine Parts

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the current replacement for some BMW 6 and 8-cylinder engines built in the late 2000s and after. BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. It's listed as a replacement coil for N20, N55, and S55 engines. In March 2015 BMW approved it for N51/N52 engines. This part number replaces the previous BMW part number 12137594937 for the cars listed below.

Sold per coil. Includes boot and connector.

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Valve Cover Spark Plug Tube Gaskets 15 Rubber Grommets/Sealing Washers Ultra-Black RTV Gasket Maker Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

BMW N20 N52 N54 N55 Connecting Rod Bearing Set of 2 Pairs - 0.25mm Oversized provides an exceptional upgrade for enhancing engine performance and reliability. Crafted by King, these bearings are engineered to withstand the rigorous demands of high-performance driving.

• Premium Quality Construction: Made from lead-free, silver-based tri-metal material, offering superior durability and load-bearing capabilities.
• 0.25mm Oversized Design: Features an oversized specification to accommodate slight engine wear and ensure a precise fit for optimal performance.
• Enhanced Engine Stability: Provides exceptional support and stability to the connecting rods, reducing wear and extending engine life.
• Precision Engineering: Designed to meet exacting standards, ensuring perfect compatibility with BMW N20, N52, N54, and N55 engines.
• Improved Engine Operation: Delivers smoother and more efficient engine performance, enhancing the overall driving experience.

Turner Motorsport's BMW N20 N52 N54 N55 Connecting Rod Bearing Set of 2 Pairs - 0.25mm Oversized is ideal for those seeking high-quality components to boost engine reliability and performance.

Elevate your custom installation with the ECS -10AN O-Ring Boss fitting, a crucial component that connects your ECS Tuning Catch Can to a 3/4" ID hose. This fitting simplifies your plumbing setup, ensuring a seamless solution.

Featuring a pre-installed Viton O-ring, this fitting is engineered for excellence, providing a leak-proof seal that resists the effects of oil and fuel exposure, guaranteeing long-term durability.

The 3/4" nipple is thoughtfully designed with barbs to secure hose position effectively, minimizing the risk of hose disconnection. Keep in mind that clamps and hoses are available for separate purchase. These fittings are sold individually, with most installations requiring a pair of them.

BMW N20 N52 N54 N55 S55 Connecting Rod Bearing Set of 2 Pairs - 0.50mm Oversized is designed to elevate your engine’s performance and reliability. Developed with high-performance driving in mind, this connecting rod bearing set from Turner Motorsport offers superior durability and support. Each set includes 2 upper and 2 lower bearing shells, crafted from a lead-free, silver-based tri-metal material that is specifically engineered for extreme load applications. These bearings are meticulously designed to meet exact standards, ensuring optimal fitment and compatibility with your BMW engine, resulting in smoother and more reliable operation.

• Enhanced Engine Performance: Provides superior support and stability for high-performance driving.
• Durable Construction: Lead-free, silver-based tri-metal material designed for extreme loads.
• Precise Fitment: Engineered to exact standards for compatibility with BMW N20, N52, N54, N55, and S55 engines.
• Improved Reliability: Ensures smoother engine operation and reduced wear over time.
• Complete Set: Includes 2 upper and 2 lower bearing shells for 2 connecting rods.

Upgrade your stock oil cooler thermostat for improved performance. Swap out your existing cover with ease, replacing it with a durable billet cover. Upgrade from your 110-degree Celsius thermostat to a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly unlike thermostat bypass kits.

Kit contents:

Billet thermostat housing cover
Replacement gasket
Hardware
Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring