Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Bavarian Autosport - Corporate Logo
T#:640209
Part#: 11368605123
In Stock
Sale - Save 20% $ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.99 USD
Free Shipping
Sale - Save 20%
$ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.99 USD
Free Shipping
If your VANOS solenoid has failed, you could experience a poor running condition as well as a loss of power. Two required per car.
Macht Schnell - Corporate Logo
T#:593749
Part#: 10.00.011
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation
Show More Show Less
Bavarian Autosport - Corporate Logo
T#:19560853
Part#: 11127848154
In Stock
Sale - Save 15% $ 453.99

This product was last offered at the strikethrough price on
05-03-2026

$ 385.89 USD
Free Shipping
Sale - Save 15%
$ 453.99

This product was last offered at the strikethrough price on
05-03-2026

$ 385.89 USD
Free Shipping

Bavarian Autosport - Corporate Logo
T#:19560852
Part#: 11127848153
Ships on Sep 15, 2026
Sale - Save 15% $ 453.99

This product was last offered at the strikethrough price on
05-03-2026

$ 385.89 USD
Free Shipping
Sale - Save 15%
$ 453.99

This product was last offered at the strikethrough price on
05-03-2026

$ 385.89 USD
Free Shipping

Revshift - Corporate Logo
T#:1120843
Part#: PMM-R36
Ships on Sep 3, 2026
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
These mounts are designed for the BMW E36 and E46 including the M3, Z3, and Z4 as well as the E90/E92 M3. Excluding the E46 XI. Revshift polyurethane motor mounts are made in the U.S.A. from high-grade polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevents the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. These mounts have removable screws for ease of installation. We recommend using Loctite on the threads during installation. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Febi - Corporate Logo
T#:363804
Part#: 11287838797
Ships on Nov 11, 2026
$ 83.99 USD
Free Shipping
$ 83.99 USD
Free Shipping
The Hydraulic Alternator Belt Tensioner is exposed to a lot of dirt, salt, and other debris due to its front lower location. This can cause the tensioner to seize and not allow the belt tensioner to adjust. Replace your belt tensioner with this OEM high quality hydraulic tensioner for many years of reliable operation to come.
Show More Show Less

Bavarian Autosport - Corporate Logo
T#:638073
Part#: 11127552281
In Stock
Sale - Save 20% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 235.19 USD
Free Shipping
Sale - Save 20%
$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 235.19 USD
Free Shipping
Years of excessive can cause the plastics of your valve cover to become warp or become hard and brittle, leading to cracking and potential oil leak issues. If you are experiencing oil loss, vacuum issues, or even poor running conditions, your valve cover may be the reason why. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less
Bavarian Autosport - Corporate Logo
T#:2119641
Part#: 13537574132KT1
In Stock
$ 239.99 USD
Free Shipping
$ 239.99 USD
Free Shipping

MINI R52 R53 JCW Fuel Injector - Set Of 4

Upgrade your MINI with the MINI R52 R53 JCW Fuel Injector - Set Of 4, designed for enhanced performance. Whether you're tuning your W11 Supercharged engine above 200HP+ or replacing injectors in JCW engines, these OEM-designed injectors deliver reliable fuel flow and efficiency.

Key Benefits:

  • OEM design ensures perfect fit and function
  • Suitable for W11 Supercharged engines with tuned setups
  • Direct replacement for JCW engines in R52 S and R53 models
  • Features a two-hole 380cc design for optimal fuel delivery

Bavarian Autosport served the needs of BMW and MINI enthusiasts from 1974-2019. In 2019, ECS Tuning acquired the Bavarian Autosport brand, committing to continuing the tradition of excellence Bav Auto is known for. Over the years, Bav developed their own brand of parts, accessories and upgrades. A lot of these parts are engineered and built by OEMs (Original Equipment Manufacturers – companies who make original parts for BMW, MINI, and other European marques). Just as MINI, we work with a variety of manufacturers in Europe, Asia and North America. In many cases, we have sourced parts that are superior to Original Equipment.

A lot of time and resources have been put into developing and evaluating these products, as well as the companies who produce them. We stand behind every product we sell. If any product fails to meet our standards — or our customers' expectations — we won't sell it, and we're certainly not going to put the Bavarian Autosport name on it. In fact, we're so confident in the quality of these parts that we back every Bavarian Autosport brand part with a 2-year warranty.

Show More Show Less

Bav Auto Variable Engine Timing Solenoid Switch - BMW E39 E46 E53 E83...
Requires use of open-ended wrench for installation - does not fit BMW specific socket tool
Bavarian Autosport - Corporate Logo
T#:599824
Part#: 11361432532
In Stock
Sale - Save 20% $ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 75.19 USD
Free Shipping
Sale - Save 20%
$ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 75.19 USD
Free Shipping
This solenoid works with the VANOS engine timing system to improve horsepower and torque throughout the RPM range. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less

Febi - Corporate Logo
T#:374103
Part#: 11311738700
In Stock at Vendor
$ 63.99 USD
Free Shipping
$ 63.99 USD
Free Shipping
Guide used to tension the timing chain
Bavarian Autosport - Corporate Logo
T#:638092
Part#: 11127512839
In Stock
Sale - Save 20% $ 252.99

This product was last offered at the strikethrough price on
05-03-2026

$ 202.39 USD
Free Shipping
Sale - Save 20%
$ 252.99

This product was last offered at the strikethrough price on
05-03-2026

$ 202.39 USD
Free Shipping
Direct replacement for cracked, leaky, warped, or otherwise failing plastic valve covers. Fits a variety of vehicles, including E39, E46, E53, E60, E83, and Z4 chassis' equipped with the M54 engine.
Active Autowerke Power Pulley Kit - E9x M3
For vehicles with production date 2007-5/2008
Active Autowerke - Corporate Logo
T#:397285
Part#: 13-001
Ships in 3 Business Days
5% off MSRP $ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD
Free Shipping
5% off MSRP
$ 399.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 379.99 USD
Free Shipping
Easy to install - reduces parasitic losses from belt driven auxiliary components. Engine crankshaft pulley remains the same, this modification simply unleashes untapped potential from your vehicle. Expect to see gains around 10 RWHP from your S65. All BMW power pulleys included, including alternator, water pump, and power steering pulleys.
Show More Show Less


Revshift - Corporate Logo
T#:1120842
Part#: PMM-N5X95A
Ships in 7 Business Days
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Engine Mount Right - Priced Each
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:592072
Part#: 22116780260
In Stock
$ 181.99 USD
Free Shipping
$ 181.99 USD
Free Shipping
An often overlooked bit of maintenance, the engine mounts in your vehicle are of paramount importance. Over the years and exposure to the elements, the rubber in these mounts can degrade. With bad engine mounts, excessive vibration and noise is transferred to the cabin. By replacing the mounts, there will be a noticeable improvement in overall driveability. Shifts will be smoother and more precise, idling will be quieter and less shaky, and vibration overall will be greatly reduced. Don't take a chance on doing damage to your vehicle with broken or worn motor mounts.
Show More Show Less
Febi - Corporate Logo
T#:363970
Part#: 11147507278
In Stock
$ 120.00

This product was last offered at the strikethrough price on
05-13-2026

$ 91.99 USD
Free Shipping
$ 91.99 USD
Free Shipping
Located in between the cylinder heads beneath the intake manifold.

Revshift - Corporate Logo
T#:1105944
Part#: PMM-F8X95A
Ships in 4 Business Days
$ 399.99 USD
Free Shipping
$ 399.99 USD
Free Shipping
Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevents the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces.
Show More Show Less

Febi Engine Mount - Left Side - E70, E71, F15, F16
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:592080
Part#: 22116865145
In Stock
$ 202.99 USD
Free Shipping
$ 202.99 USD
Free Shipping
Replace your worn out engine bushing!
Febi - Corporate Logo
T#:587397
Part#: 11288570439
Ships in 6 Business Days
$ 140.99

This product was last offered at the strikethrough price on
05-07-2026

$ 121.99 USD
Free Shipping
$ 121.99 USD
Free Shipping
Accessory belt tensioners provide tension to the belt drive system, ensuring the belt is able to properly turn engine accessories without slipping. If your tensioner has failed, replace it with a brand-new unit to ensure proper water pump and alternator functionality.
Show More Show Less

Febi Camshaft Timing Chain Tensioner - E31, E38, E39, E53
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:19295
Part#: 11311435026
In Stock
$ 100.99 USD
Free Shipping
$ 100.99 USD
Free Shipping


CHAIN TENSIONER 11311435026 Manufactured by Febi

Febi Camshaft Timing Chain Tensioner - E31, E38, E39, E53
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:19294
Part#: 11311435027
In Stock
$ 96.99

This product was last offered at the strikethrough price on
05-01-2026

$ 81.99 USD
Free Shipping
$ 81.99 USD
Free Shipping


CHAIN TENSIONER 11311435027 Manufactured by Febi


Febi - Timing Chain Guide Rail - M62TU E31, E38, E39, E53
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:363751
Part#: 11311741777
Ships in 1-2 days
$ 119.19

This product was last offered at the strikethrough price on
08-03-2026

$ 92.78 USD
Free Shipping
$ 92.78 USD
Free Shipping
U-shaped guide running between both cylinder banks

Revshift - Corporate Logo
T#:1105935
Part#: PMM-E30-95A
Ships in 4 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
These mounts are designed for a 1983-1991 E30 BMW 3-series with an M20 engine. Revshift polyurethane motor mounts are made in the U.S.A. from high-grade polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevent the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. These mounts have removable screws for ease of installation. We recommend using loctite on the threads during installation. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less
Ignition Projects - Corporate Logo
T#:1637696
Part#: IP-A122609
Ships in 3 Business Days
$ 1,055.00 USD
Free Shipping
$ 1,055.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less
Revshift - Corporate Logo
T#:13957872
Part#: PMM-F3XXI-80A
Back Ordered
$ 399.99 USD
Free Shipping
$ 399.99 USD
Free Shipping
The team at Revshift designed these motor mounts to be the most durable engine mounts on the market! Some key features of the mounts are their ability to be rebuilt and the high-quality polyurethane bushings being ab to be swapped out for harder or softer options.
Show More Show Less


OMP - Corporate Logo
T#:1614
Part#: EA-462
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less
Euro Solenoid Valve (SOLV) Vanos
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:594842
Part#: 11368610388
In Stock
$ 86.99

This product was last offered at the strikethrough price on
04-16-2026

$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
Adjustment Unit - Outlet Cam - 11367536085
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:591757
Part#: 11367536085
In Stock
$ 328.99

This product was last offered at the strikethrough price on
04-16-2026

$ 304.99 USD
Free Shipping
$ 304.99 USD
Free Shipping

Upgrade your BMW's timing chain camshaft gear with this thicker gear positioned at the front of the engine, situated off the outlet side. This gear is commonly changed when replacing the timing chain.

Benefits:

  • Enhanced durability and performance
  • Ideal for replacing timing chain components
  • Improved reliability for engine operation
Show More Show Less

Active Autowerke - Corporate Logo
T#:397307
Part#: 12-032
Ships in 3 Business Days
$ 240.00 USD
Free Shipping
$ 240.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml). 
Show More Show Less

Crank Pulley With Dampener
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:640241
Part#: 11237525135
In Stock
$ 221.99

This product was last offered at the strikethrough price on
03-31-2026

$ 156.99 USD
Free Shipping
$ 156.99 USD
Free Shipping
Active Autowerke - Corporate Logo
T#:340092
Part#: AARSC-E36M3
Ships in 10 Business Days
Starting at $ 8,074.00 USD
Free Shipping
Starting at $ 8,074.00 USD
Free Shipping
No one buys an M3 because they like limits. This carefully engineered kit matches the Rotrex C38 supercharger with the perfect hardware, software and tuning to take the factory 240 HP straight up to 360 HP (with the potential for even more power with additional upgrades). Best of all, if your craving for more power is still insatiable, there is a higher upgrade Level 2 featuring more boost and a front mounted air to air intercooler. The Active Autowerke supercharger systrem is truly modular and fully upgradeable. Running on 91-93 octane pump fuel with full emissions system intact, this system has stood the test of real world conditions and delivers thrill-worthy performance on demand while still retaining that BMW feel for a comfortable daily commute.
Show More Show Less

Febi timing chain - E30, E36, Z3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:381709
Part#: 11311247160
In Stock at Vendor
$ 138.99

This product was last offered at the strikethrough price on
05-07-2026

$ 88.99 USD
Free Shipping
$ 88.99 USD
Free Shipping
Replacement timing chain for required maintenance
Ignition Projects - Corporate Logo
T#:1637695
Part#: IP-A122602
Ships in 5 Business Days
$ 895.00 USD
Free Shipping
$ 895.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less

Revshift - Corporate Logo
T#:1120845
Part#: PMM-R300
Ships in 2 Business Days
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
These mounts are designed for the BMW E34 with an M30 or S38 engine and the BMW E39 with an M52 or M54 engine. Revshift polyurethane motor mounts are made in the U.S.A. from high-grade polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevents the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Febi Camshaft - E30, E34
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:19082
Part#: 11311716138
Ships in 2 Business Days
$ 368.34

This product was last offered at the strikethrough price on
05-15-2026

$ 292.43 USD
Free Shipping
$ 292.43 USD
Free Shipping


CAMSHAFT 11311716138 Manufactured by Febi

This item fits the following BMWs:
BMW 3 Series - 325i, 325i Convertible, 325is, 325ix
BMW 5 Series - 525i

--.
Show More Show Less
Ignition Projects - Corporate Logo
T#:1668637
Part#: IP-A132411
Ships in 5 Business Days
$ 695.00 USD
Free Shipping
$ 695.00 USD
Free Shipping
Active Autowerke - Corporate Logo
T#:397235
Part#: 12-001
Ships in 10 Business Days
5% off MSRP $ 8,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8,074.99 USD
Free Shipping
5% off MSRP
$ 8,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8,074.99 USD
Free Shipping

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. For over three decades, only one name has remained at the top of the BMW performance parts industry and Active Autowerke have built a lasting reputation as leaders in custom BMW tuning and accessories.

This supercharger kit will produce 310 horsepower and 300 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit. Additionally, this kit can be expanded to deliver even more horsepower with a few simple modifications. 


Key Features

  • Rotrex C38-81 Supercharger
  • Mounting bracket, pulleys and belt
  • 6 larger high-flow fuel injectors
  • Active Autowerke Air Filter
  • Active Autowerke Dyno-Tuned Software
  • All mounting hardware, plumbing, hoses and clamps
  • Illustrated instruction manual & installation guide
  • 2 Year Warranty with free tech support


Performance Specs

Power              :      310 BHP @ 6900 rpm
Torque             :      300 ft-lbs @ 5700 rpm
Boost Level      :      7.0 psi

This part fits the following BMWs:
1992-1999 E36 328i 328is 

Show More Show Less


Active Autowerke - Corporate Logo
T#:397239
Part#: 12-003
Ships in 10 Business Days
5% off MSRP $ 8,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8,074.00 USD
Free Shipping
5% off MSRP
$ 8,499.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 8,074.00 USD
Free Shipping
360HP/300TQ - a complete power solution for your M3!
Febi Engine Mount - Right - E46
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:381854
Part#: 22116750862
In Stock at Vendor
$ 146.99

This product was last offered at the strikethrough price on
04-06-2026

$ 107.99 USD
Free Shipping
$ 107.99 USD
Free Shipping
Standard replacement mount
Crank Pulley With Dampener
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:591627
Part#: 11237562801
In Stock
$ 97.71

This product was last offered at the strikethrough price on
05-11-2026

$ 68.99 USD
Free Shipping
$ 68.99 USD
Free Shipping

Smooth out rotational vibrations and maintain optimal engine performance with this pulley-driven unit for your Mini. Over time, wear and drying out can lead to unusual noises near the passenger's side oil pan, indicating the need for replacement. Ensure seamless operation by replacing this unit when necessary, and don't forget to change the hex bolts for comprehensive maintenance.

  • Reduces rotational vibrations for smoother engine operation
  • Prevents unusual noises near the passenger's side oil pan
  • Ensures optimal engine performance and longevity
  • Replacement recommended to maintain engine health
  • Hex bolts replacement advised for thorough maintenance
Show More Show Less

Ignition Projects - Corporate Logo
T#:1637693
Part#: IP-A122413
Ships in 5 Business Days
$ 695.00 USD
Free Shipping
$ 695.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less

Febi - Corporate Logo
T#:239
Part#: 11311405081
In Stock at Vendor
$ 395.99

This product was last offered at the strikethrough price on
05-07-2026

$ 384.99 USD
Free Shipping
$ 384.99 USD
Free Shipping

The timing chain tensioner from the 1995 E36 M3 is a great upgrade for other Motorsport models - 1988-1991 E30 M3 and 1989-1995 E34 M5! This tensioner virtually eliminates the cold start-up engine rattle so common with the S14 and S38 engines. It makes the whole engine quieter and smoother. Any new tensioner will accomplish that but the S50 tensioner has several new features that make it superior to the original design. This unit also has a internally loaded spring, so installation is much easier than the old style tensioner (no need to squeeze the spring and hold it while installing). Includes oil seal ring (not pictured).

Aftermarket Febi brand.

This item fits the following BMWs:
1985-1989 E24 BMW M635CSi M6 - M88/3, S38B35 engine
1988 E28 BMW M5 - M88/3, S38B35 engine
1988-1991 E30 BMW M3 - S14 engine
1989-1995 E34 BMW M5 - S38 engine
1995 E36 BMW M3 - S50B30US engine
1994-1999 E36 BMW M3 Euro - S50B30 and S50B32 engines

Show More Show Less
Febi Valley Pan With Gasket - E31, E32, E34, E38, E39, E53
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:366991
Part#: 11141742042
In Stock at Vendor
$ 116.99 USD
Free Shipping
$ 116.99 USD
Free Shipping
Experiencing a slow, mysterious, loss of coolant? Smell coolant when accelerating or braking? Time for a valley pan gasket service!

Active Autowerke - Corporate Logo
T#:397296
Part#: 12-023
Ships in 10 Business Days
5% off MSRP $ 11,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10,686.99 USD
Free Shipping
5% off MSRP
$ 11,249.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 10,686.99 USD
Free Shipping

Since getting their start in 1981, Active Autowerke has earned a well-respected reputation in the BMW community for engineering high-quality power solutions for popular BMW models. This supercharger kit will produce 525 horsepower and 335 ft.lbs. of torque on your BMW, while retaining platform integrity and daily driveability. Unique to the design of the Rotrex supercharger is the traction drive system, which eliminates the lag often found in other centrifugal supercharger setups. Power delivery is smooth and dependable, and 100% reversible to stock if you so choose, since each system is designed as a self-contained unit.

Kit features:

  • Rotrex 92 trim supercharger running 7 PSI of boost
  • Supercharger bracket, pulleys, & belt
  • Self-contained oiling system with front-mount oil cooler
  • 6 high-flow fuel injectors
  • Colder heat range spark plugs
  • Active Autowerke  Generation 7 intake manifold with dual bypass valve
  • Front mount air-to-air intercooler
  • Active Autowerke air filter
  • Active Autowerke dyno-tuned software
  • All mounting hardware, plumbing, hoses, & clamps
  • Illustrated instruction manual & installation guide
  • 2 year warranty with free tech support

Performance Specs:

  • Power   :   525 BHP @ 7650 rpm
  • Torque   :   335 ft/lbs @ 5400 rpm
  • Boost Level   :   7-8 psi
Show More Show Less
Febi Timing Chain Tensioner
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:359495
Part#: 11311743187
In Stock at Vendor
$ 146.99

This product was last offered at the strikethrough price on
05-07-2026

$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
This timing chain tensioner keeps the tension rail properly positioned on the BMW M42 and M44 4 cylinder engine.

This item fits the following BMWs:
1990-1991  E30 BMW  318i 318is 318ic
1992-1998  E36 BMW  318i 318is 318ti 318ic
1997-1999  Z3 BMW  Z3 1.9
Show More Show Less

Revshift - Corporate Logo
T#:1105937
Part#: SMK-E30
Ships in 4 Business Days
$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping
Solid bolt through 70D polyurethane motor and trans mounts. Recommended for race use only. These mounts are designed for a 1983-1991 E30 BMW 3-series with an M20 engine. Revshift motor mounts are made by Revshift in the U.S.A. from high-quality polyurethane. 70D polyurethane has a comparable hardness to plastics such as Delrin and UHMW. Unlike plastic, polyurethane is an elastomer which means it will return to its original shape if deformed and it will not crack. We do not recommend plastics for automotive use due to their inherent brittleness and inability to return to their original shape when deformed. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less

Ignition Projects - Corporate Logo
T#:1637692
Part#: IP-A122409
Ships in 5 Business Days
$ 695.00 USD
Free Shipping
$ 695.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less
Ignition Projects - Corporate Logo
T#:1637697
Part#: IP-A122613
Ships in 5 Business Days
$ 1,055.00 USD
Free Shipping
$ 1,055.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less
Revshift - Corporate Logo
T#:1105934
Part#: PMM-24V-95A
Ships in 7 Business Days
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
These mounts are designed for a 1983-1991 E30 BMW 3-series with a 24 valve M50/M52/S50/S52/S54 engine swap with an E21, 2002tii, or VW MK2 Golf brake booster. They use the OEM motor mount bolt holes on the E30 subframe. The mounts are angled with offset bolts to position the engine so that proper drivetrain alignment is maintained. They are used with E36 engine brackets. Revshift motor mounts are made by Revshift in the U.S.A. from high-quality polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevents the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. These mounts have removable screws for ease of installation. We recommend using Loctite on the threads during installation. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.
Show More Show Less


Active Autowerke - Corporate Logo
T#:28504210
Part#: 12-005
Ships in 6 Business Days
5% off MSRP $ 14,125.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13,418.99 USD
Free Shipping
5% off MSRP
$ 14,125.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 13,418.99 USD
Free Shipping

Active Autowerke, established in 1981, has become a highly regarded name in the BMW community, known for their top-notch power solutions for various BMW models. This supercharger kit they offer packs a punch, capable of generating over 400 horsepower for your BMW while ensuring the vehicle's structural integrity and suitability for daily driving. What sets this kit apart is the Rotrex supercharger's design, featuring a traction drive system that eliminates the lag commonly associated with other centrifugal superchargers. This results in a smooth and reliable power delivery experience.

Key components of the kit include the Rotrex C38-92 trim supercharger, an Active Autowerke front-mount air-to-air intercooler, a high-flow fuel pump, supercharger brackets, pulleys, and belts, six high-flow fuel injectors, an Active Autowerke air filter, dyno-tuned software, and all necessary mounting hardware, plumbing, hoses, and clamps. Additionally, the kit comes with an illustrated instruction manual and installation guide, ensuring a straightforward installation process. Active Autowerke also offers a 2-year warranty along with free technical support for added peace of mind.

Show More Show Less
Febi - Corporate Logo
T#:382330
Part#: 11237568345
Ships on Nov 11, 2026
$ 270.99 USD
Free Shipping
$ 270.99 USD
Free Shipping
Drives accessories; located at the end of the crankshaft