BMW E36 E46 M50 M52 In-Tank Fuel Pump DeatschWerks DW300 340 LPH With Install Kit is a high-performance fuel pump engineered for BMW models requiring a reliable and efficient fuel system upgrade. The DW300 is DeatschWerks' flagship in-tank pump, delivering superior flow and compatibility with ethanol fuels. It includes an installation kit for select 6-Cylinder E36 and E46 models, including the E36 and E46 M3.

• High Flow Rate: Delivers 340 liters per hour at 40 psi, ideal for high-performance and E85 applications.
• Quiet Operation: Features a turbine impeller and computer-balanced armature for minimized noise.
• E85 Compatible: Built with carbon commutators and a fully encapsulated armature to handle ethanol fuels.
• Comprehensive Kit: Includes a complete installation kit for select BMW E36 and E46 models.
• Durable Design: Backed by a 3-year no-fault warranty for reliable performance.

Features:

• Weight: 12.6 oz (360 grams)
• Inlet Fitting: 7.7mm ID / 11mm OD
• Outlet: 5/16" Hose Clamp
• Turbine Type: Single Scroll Composite
• Installation instructions are available on DeatschWerks' website.

These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP).  They provide approximately 50% more flow when combined with your stock pump.

Kit includes the following:

• SAE J30R10 E85 compatible fuel line
• 14ga fuel resistant wiring harness
• Quick connect female bullet connectors (2)
• Vent tube replacement clip
• Nylon cable ties (10)
• Stainless steel lock nuts (2)
• 10ga/14ga step-down butt splices w/E85 compatible heat-shrink tubing (2)
• Pushlock pump retention fittings (2)
• 14ga butt connectors w/heat-shrink tubing for pump removal to return to stock if/when desired (2)

  *Note:  Walbro does not warranty this pump for E85 use.  If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.

  ** IMPORTANT:  Do NOT attempt to run this kit inline with a Stage 2 kit.  The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.  

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol. 

The Stage 2 bucketless kit includes the following:

• • A custom anodized billet fitting for the pump output and stock fuel line connection.
  • Our custom billet aluminum anodized bracket for the pump and float assembly
  • Two cotter pins to secure your float assembly
  • A new E85 compatible Walbro 450 pump
  • Spare vent tube clip
  • A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

• • A complete plug and play solution by simply adding the secondary module
  • Our custom billet aluminum fitting to run both pumps in parallel
  • A new E85 compatible Walbro 450 pump
  • Wiring harness for the secondary pump
  • Spare vent tube clip
  • A new Walbro filter

• Recommended accessories:
  • Lock Ring Removal Tool
  • Hobb's switch 
     
• NOTE: These kits include a basic filter assembly.  When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump.  In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns.  Again for those applications we'd recommend one of our standard pump applications.

BMW F8X S55 Flex Fuel Kit | Fuel-It! from Turner Motorsport is essential for those running E85 or ethanol blends in their BMW. This comprehensive kit offers a plug-and-play solution for installing a Bluetooth ethanol sensor in your S55-powered vehicle.

• Complete Upgrade: Replaces stock fuel lines with -6an E85-compatible lines from the fuel tank to the engine bay.
• Advanced Monitoring: Includes an ethanol sensor and Bluetooth analyzer for real-time ethanol content monitoring.
• Versatile Compatibility: Supports both Bluetooth App and 5v analog output for integration with JB4 or flash tuning.
• Custom Fitment: Options available for stock HPFP setups, port injection kits, or non-Fuel-It! port injection systems.
• High-Quality Components: Features BMS custom billet aluminum fittings for a seamless integration without modifications.
• Off-Road Use Only: Designed for off-road applications, ensuring high performance for enthusiasts.

The DW65v bridges the gap for a fuel pump that seamlessly fits like stock while delivering the necessary flow capacity to support the potent power capabilities of the 1.8t engine. Prior solutions were limited to pumps with power restrictions or complex installations.

Part of the esteemed DW65 pump series, which includes the DW65c and DW65a, the "v" version boasts an impressive 265lph flow rate, making it capable of supporting up to 500hp. The DW65 series is renowned for its specialty fitment, ensuring a 100% drop-in fit for applications that deviate from standard fuel pump sizing. The DW65v maintains the factory pump's pickup points and utilizes a system mirroring stock configurations to ensure consistent fuel levels, effectively eliminating fuel starvation concerns during low fuel conditions or high-speed cornering. Additionally, all DeatschWerks fuel pumps are accompanied by an industry-leading 3-year warranty.

Key Features:

• Effortless drop-in fit
• Power support for up to 500hp
• Impressive 265 LPH flow rate, outperforming the TT225 by 40%
• Resolves fuel starvation issues often associated with high-flow pumps
• No additional wiring required; the connector matches the factory setup
• Benefit from a 3-year no-fault warranty
• Operates with a quiet and reliable turbine impeller

Compatible with 2002-2008 MINI Cooper S/JCW Supercharged Engines.

This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one.  The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs.

• Trade-in:
  • This option allows you to receive a rebuilt/upgraded stock bucket with a new Walbro 450 pump, filter, and fittings to swap out your stock LPFP assembly.  A $150 core deposit is included in the price that will be refunded when we receive your *stock bucket.
• New Build:
  • This option includes a new LPFP bucket that is upgraded with a new Walbro 450 pump, filter, and fittings.  No core deposit is required but you are eligible for a core refund of $50 should you elect to return your *stock bucket.

Both options include the following:

• A complete plug and play solution by simply replacing your stock bucket
• A new E85 compatible Walbro 450 pump
• A new Walbro filter
• A custom fitting that is tuned to optimize the venturi and pump output
• Spare vent tube clip
• Flow testing prior to shipping
• Recommended accessories:
  • Lock Ring Removal Tool 

 To be eligible for a core return, the bucket must be completely stock and undamaged. (Pump itself does not have to be functioning) 

+ International customers:  Due to different emissions requirements, the top portion of your fuel bucket (top hat) is different and doesn't have a large vent tube connection.  For this reason, we are no longer sending the top hat to international customers as this often causes confusion.  Those customers will simply re-use their current top hat when installing their Stage 2 pump.

- All Stage 2 assemblies are stock buckets that have been rebuilt and may show signs of being disassembled and rebuilt.  They are all flow tested and verified before being shipped.