Drivetrain Mounts and Upgrades

Upgrade your drivetrain performance with ECS Tuning Performance Polyurethane Differential Bushings—engineered specifically for BMW F8x/G8x models and designed to deliver superior power transfer, durability, and driving precision.

Factory rubber differential bushings are built for comfort, absorbing vibrations between the differential and chassis during everyday driving. However, they are a known wear item that degrade over time—especially under spirited or aggressive driving conditions. Many F8x/G8x owners experience premature cracking and wear, leading to excessive drivetrain movement, reduced throttle response, and unwanted wheel hop.

ECS Tuning’s in-house engineered polyurethane differential bushings provide a high-performance solution to these common issues. By significantly reducing drivetrain deflection, these upgraded bushings enhance throttle response, improve handling stability, and minimize wheel hop—resulting in a more connected and controlled driving experience.

Constructed from durable 95A durometer red polyurethane and paired with precision CNC-machined 6061-T6 aluminum sleeves, these bushings are built to withstand extreme driveline forces while maintaining street-friendly comfort. Unlike solid or delrin mounts, ECS polyurethane bushings strike the perfect balance between performance and daily drivability—delivering increased rigidity without excessive noise, vibration, or harshness (NVH).

Whether you're carving canyon roads, launching at the drag strip, or simply commuting, these performance differential bushings ensure more efficient power delivery from the differential to the wheels—giving you better throttle modulation, traction, and overall control.

Key Features & Benefits:

Performance polyurethane differential bushings for BMW F8X models
Reduces drivetrain movement and improves power transfer
Enhances throttle response and minimizes wheel hop
95A durometer polyurethane for optimal balance of performance and comfort
CNC-machined 6061-T6 aluminum inserts with Type II black anodizing for corrosion resistance
Resistant to oil, chemicals, ozone, and road salt for extended service life
Designed to handle high torque loads and extreme driving conditions
Engineered using real-world load data and worst-case operating scenarios
Maintains street-friendly NVH levels compared to solid mounts
Replace worn factory bushings with ECS Performance Polyurethane Differential Bushings and experience tighter handling, improved drivetrain response, and long-lasting reliability.

As your E30 ages, the rear differential bushing can crack, dry rot, and split. It's time for an upgrade. The ECS Tuning Heavy Duty Differential Bushing is crafted with performance in mind. Instead of using polyurethane, which is known for increasing NVH, the enthusiasts at ECS chose HD 70D rubber. This material offers a close-to-factory feel without the excess deflection of softer bushings, ensuring a pleasurable driving experience free from differential whine and excess movement.

Features & Benefits:

Eliminates Weak OEM Mount: The aging E30 chassis deserves an upgrade. Replace your old, cracked, and worn factory bushing with this HD alternative for improved performance. Perfect for Street or Track: Constructed from HD rubber instead of polyurethane or Delrin, this bushing provides comfort for daily driving while remaining effective in performance applications. Added Responsiveness: The 70D HD rubber compound is stiffer than the stock material, reducing drivetrain movement and effectively locking down your rear differential. Easy Installation: Precision-manufactured to the exact specifications of your OEM differential bushing, the ECS heavy-duty replacement installs just like the factory component. Whether you are replacing an aging factory bushing, removing excess driveline movement, or balancing performance and comfort, ECS Tuning has you covered with their Heavy Duty Rear Differential Bushing.

A sloppy shifter is one of the common complaints of older BMWs. In addition to the shifter linkage the transmission mounts contribute to rough and clunky shifting. BMW transmission mounts are rubber and get softer over time. This allows the transmission to dance around which changes the geometry of the shift linkage and could make it harder to shift. These urethane transmission bushings are stiffer than the stock rubber mounts and won't let the transmission shift around as much. The round design also has more surface area than the stock mounts which helps spread the load. Because the urethane is stiffer, expect more vibration to make its way into the shift lever area. Engine motor mounts should also be considered as a cause for driveline vibration, transmission movement, and poor shifting. Consider replacing your motor mounts at the same time as your tranny mounts.

Price is for the pair of transmission mounts with hardware.

This item fits the following BMWs: 
1989-1995  E34 BMW  525i 530i 535i 540i M5 
1992-1998  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 
1997-2003  E39 BMW  525i 528i 530i 540i M5 
1999-2005  E46 BMW  323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 
2008-2012  E82 BMW  128i 135i 1M Coupe 
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan 
2006-2012  E91 BMW  328i - Wagon 
2007-2013  E92 BMW  328i 335i 335is - Coupe 
2007-2013  E93 BMW  328i 335i - Convertible 
1997-2002  Z3 BMW  Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 

Your rear differential is indirectly connected to your right foot through the engine and driveline, and connected to the seat of your pants through the chassis. Soft factory rubber differential bushings absorb vibrations between chassis and differential, providing comfort and softness in both of these connections.

Enter ECS Tuning's In-House Engineered Performance Polyurethane Differential Bushings. By eliminating the deflection factory rubber bushings permit, the connection between your right foot (and your seat) to the wheels is improved. Removal of this slop allows for crisper power transfer from differential to wheels, which means better throttle control while carving a canyon road, drag racing, sliding the rear end out, or just driving to work. This is achieved without the harshness or vibration associated with delrin or solid differential mounts.

Featuring a tough 88A durometer polyurethane and Black anodized 6061-T6 aluminum Sleeve, our Performance Polyurethane Differential Bushings are more resistant to chemicals, ozone degradation, road salt, and general wear and tear than factory rubber bushings, resulting in a longer service life.

URO Lower Engine Mount / Rubber - Stabilizer Link - BMW F39 F48 MINI F54

URO Lower Engine Mount / Rubber - Stabilizer Link - BMW F39 F48 MINI F54 is a premium replacement component designed to restore optimal performance to your vehicle’s drivetrain. When the engine mount fails, it can lead to increased vibration and poor engine operation. Replacing the mount with this high-quality part reduces vibration and ensures smooth, reliable engine operation. Manufactured to align and support the engine in accordance with OEM specifications, this part helps keep your vehicle running like new.

• Guaranteed fitment for BMW F39 F48 and MINI F54 models
• Replacing the failed engine mount reduces drivetrain vibration for a smoother ride
• Aligns and supports the engine according to OE specifications
• High-quality alloy and elastomer materials are heat and ozone resistant for maximum durability
• Restores proper engine alignment and function, promoting longevity of the engine and related components
• 24 Month Unlimited Mileage Warranty for peace of mind