Differential Mounts

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. Genuine BMW bushings are the perfect option to restore suspension back to day 1 quality.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Genuine BMW Rubber Mounting Rear -
This item fits the following BMW Chassis:
E83 X3,E85,E86,E89 Z4

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

The Powerflex Rear Sway Bar Bushing - 18.5 mm Street for the BMW X3 (2003-2010) is a premium suspension upgrade designed to replace the factory rubber bushings with high-performance polyurethane. This bushing specifically fits rear sway bars with a 18.5 mm diameter, providing better durability and handling for street-focused driving.

Product Features:

1. The Powerflex Rear Diff Front Mount Bushing - Flat Type for the BMW E38 7 Series and E39 5 Series is a premium suspension component designed to replace the factory rubber bushing in the front mount position of the rear differential. This high-performance polyurethane bushing is engineered to enhance drivetrain stability and improve overall vehicle performance, making it an ideal upgrade for drivers seeking longevity and sharper handling.

   Product Details:

   1. Flat-Type Design: This bushing is built with a flat-type design, which ensures a direct replacement fit for the factory-installed bushing in the front mount of the rear differential. It aligns perfectly with the BMW E38 and E39 chassis, providing an accurate and secure fit without the need for modifications.

   2. Polyurethane Material: Powerflex bushings are constructed from high-quality polyurethane, which offers superior durability compared to traditional rubber. This material is highly resistant to wear, heat, and degradation from oils and road contaminants, ensuring that the bushing remains effective for a much longer period under both normal and performance driving conditions.

   3. Enhanced Drivetrain Control: The rear diff front mount bushing plays a critical role in controlling the movement of the rear differential during acceleration, deceleration, and cornering. Powerflex's polyurethane bushing limits excessive movement and reduces drivetrain flex, leading to more consistent power delivery, reduced differential "clunking," and a smoother, more precise ride.

   4. Improved Handling: By stiffening the front mount of the rear differential, this bushing enhances the stability and control of the rear suspension, particularly during aggressive driving. Drivers will notice a reduction in body movement and improved handling characteristics, allowing for more confident cornering and better overall vehicle dynamics.

   5. Direct Replacement for OEM Bushings: Designed to replace the original rubber bushing without any additional modifications, this bushing fits seamlessly into the existing suspension setup of the BMW E38 7 Series and E39 5 Series. Installation is straightforward, and the bushing is engineered to match the factory specifications while offering a significant performance upgrade.

   6. Long-Lasting Durability: Polyurethane bushings are designed to withstand harsh conditions and prolonged use, far outlasting the OEM rubber components. This bushing resists cracking, warping, and deterioration over time, ensuring that it maintains its structural integrity and performance even after years of use.

   Advantages:

   • Increased Drivetrain Stability: Reduces differential movement, providing a smoother and more stable power transfer to the rear wheels.
   • Better Handling Response: Enhances rear-end control during acceleration, deceleration, and cornering, improving overall vehicle dynamics.
   • Long-Lasting Material: Outlasts rubber bushings, offering a cost-effective, long-term suspension upgrade.
   • Direct OEM Fitment: Simple replacement with no modification required, ensuring an easy installation process.

   Fitment:

   • BMW E38 7 Series (1994-2001)
   • BMW E39 5 Series (1995-2003)

   Key Benefits:

   • Reduced Drivetrain Slack: Minimizes play in the rear differential, eliminating clunks and improving overall ride quality.
   • Durable and Resilient: Made from high-performance polyurethane that resists damage from road debris, oils, and extreme temperatures.
   • Perfect for Daily or Performance Driving: Balances improved handling with everyday comfort, making it a suitable upgrade for both street and spirited driving.

   For BMW E38 7 Series and E39 5 Series owners looking for a reliable, long-lasting upgrade, the Powerflex Rear Diff Front Mount Bushing - Flat Type delivers improved handling, enhanced drivetrain control, and a more responsive driving experience. This is a vital upgrade for maintaining the performance and reliability of your rear suspension system.

The perfect upgrade for any E46, this finned differential cover increases cooling to the rear differential to prevent over heating and possible damage. This is a complete kit including fluid and drain plugs.

Includes the following

• Aluminum finned differential cover
• Drain & fill plug with sealing o-ring
• 2 Quarts of Redline 75w90

Absorbs vibration in the drive-train to help dampen noise that would be transferred to the cabin of the vehicle.

Genuine BMW Vibration Absorber -
This item fits the following BMW Chassis:
E36,E38,E39
 

This kit includes Turner Motorsport solid aluminum differential race mounts pre installed in the differential cover for a quick install. These mounts where developed by Turner Motorsport for their Grand-Am Cup E46 M3 race cars, the advantages of solid aluminum mounts is increased suspension & drivetrain response, less drivetrain loss resulting in more wheel horsepower, and longevity - they effectively last forever. These CNC-machined mounts are a direct replacement for the stock rubber pieces, and have been lightened to remove excess weight.