Subframe

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Upgrade your E46's rear subframe with the Revshift Combo Kit, featuring 80A durometer polyurethane rear subframe bushings and a comprehensive weld-in reinforcement plate kit. Designed to address the notorious cracking and ripping of rear subframe mounting points over time, this kit provides a robust solution to prevent costly damage to your vehicle.

Key Features:

Complete Solution: Includes 95A durometer polyurethane rear subframe bushings and precision laser-cut 14-gauge steel reinforcement plates for comprehensive subframe reinforcement. Prevents Damage: Weld-in reinforcement plates protect against cracks and damage to the chassis, ensuring long-term durability and stability. Enhanced Handling: Revshift polyurethane rear subframe bushings replace OEM rubber bushings, stiffening mounting points to improve handling and performance. Durable Construction: Polyurethane bushings are designed to last and do not wear out like rubber OEM bushings, providing consistent performance over time. Proper Dampening: Polyurethane bushings properly dampen the rear subframe, enhancing overall vehicle stability and control. Benefits:

Improved handling capabilities Long-lasting durability compared to OEM rubber bushings Protection against bending or cracking of subframe mounts The comprehensive kit includes all necessary components for installation Upgrade your E46's rear subframe with the Revshift Combo Kit for superior handling, durability, and protection against chassis damage. Boost your driving experience with enhanced performance and stability.

The Powerflex Front Sway Bar Bushings and Strengthening Support Plate for the BMW E60/E61 M5 and E63/E64 M6 offer enhanced suspension performance.

• Improved Handling: Firmly secures the sway bar to reduce body roll and improve cornering stability.
• Durable Polyurethane: Lasts longer than rubber, resisting wear and contaminants.
• Strengthening Plate: Adds rigidity to the sway bar mounts, reducing flex under heavy loads for more precise handling.
• Better Stability: Provides sharper, more responsive handling during aggressive driving.

Perfect for M5 and M6 owners seeking enhanced handling and suspension support.

.

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

The Powerflex Rear Subframe Rear Bushing Insert for the BMW E36 3 Series (1990-1998) is an innovative performance enhancement designed to improve the stability and handling of the rear suspension. This insert works in conjunction with the existing rubber bushings, providing significant upgrades in responsiveness and durability.

Key Benefits:

1. Improved Rear Suspension Control: The insert is crafted from high-performance polyurethane, which reduces the amount of flex and movement in the rear subframe. This increased stiffness enhances stability during cornering, resulting in better traction and handling, especially under dynamic driving conditions.

2. Durability and Longevity: Unlike factory rubber bushings, which can wear out and degrade over time due to exposure to heat and road conditions, Powerflex inserts are built to withstand harsh environments. Their robust construction ensures that they maintain performance levels longer, providing reliable support to the subframe.

3. Enhanced Handling Characteristics: By minimizing unwanted movement, these inserts help to optimize the alignment of the rear suspension components. This leads to improved handling response and cornering capabilities, giving drivers more confidence and control during spirited driving.

4. Simple Installation Process: Specifically designed for the E36 3 Series, these inserts fit directly into the original subframe bushings without any need for modification. The installation is straightforward, making it an accessible upgrade for DIY enthusiasts and professionals alike.

5. Versatile Application: Whether for daily driving, track use, or spirited weekend rides, these inserts are suitable for various driving styles. They enhance the overall performance of the rear suspension, making them a great addition for both casual drivers and performance enthusiasts.

This upgrade is ideal for BMW E36 3 Series owners seeking to elevate their vehicle's rear suspension performance and responsiveness. The Powerflex Rear Subframe Rear Bushing Insert offers a reliable solution for improving handling, stability, and overall driving enjoyment, making it an excellent choice for enhancing the driving experience.