AFE BMW Intake Parts

Looking for a bolt-in upgrade to outflow your stock intercooler tubes? This intercooler tube from aFe outflows the stock tube by 16%! Made from mandrel-bent, black powdercoated aluminum tube, it utilizes factory-style attachments for simpler installation.

Fits the Following BMWs:

E90 E92 E93 335i N55

A simple 30-minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high-quality case & wire harness with factory style connectors for an easy plug & play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red). This performance module increase turbo boost. It improves vehicle performance and throttle response. In testing, this module resulted in significant +33 horsepower and up to +50 lbs. x ft. of torque verified by our in-house dyno.

Direct Plug & Play Power:
This quick and easy plug & play SCORCHER GT module adds significant power by altering pressure sensor signals to increase turbo boost to improve vehicle efficiency, power and throttle response.

In-Cabin On-the-Fly Power Adjustments:
SCORCHER GT modules feature In-Cabin On-the-Fly power adjustment to accommodate any situation. This adjustment is controlled by via LED light switch with a button that can be easily mounted in any location in the cabin.

High-Quality Case & Wire Harness:
aFe SCORCHER GT modules use high-quality aluminum extrusion black powder-coated enclosure casing and factory style connectors which requires no modification to your factory harness. These factory style connectors plug directly into the stock wiring harness connectors and sensors.

High Precision and Quality:
SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products.

aFe POWER does not recommend to use with any other tuners or modules.

This SCORCHER GT is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

This part fits the following BMWs:
2016-2018 F87 M2 N55

This fully TIG-welded bar & plate design intercooler from aFe is 25% larger than stock, outflowing the factory intercooler and tubes by 21% and substantially lowering intake temperatures. Intercooler and tubes bolt into place with factory-style connections.

Fits the Following BMWs:

F30 335i N55 manual transmission only

7" Tall "Oil Free" Air Filter:
This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance.

High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Carbon Fiber Look Cover w/ Auxiliary Air Inlet:
This carbon fiber look cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. A urethane plug is also included if you wish to block off the auxiliary air inlet.

Hassle-Free Installation:
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Note 1:
Does NOT fit Convertible models.

Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

Reinforced Silicone:
These couplings feature high temperature 5-Ply polyester reinforced silicone material which meet or exceed SAEJ20 Standard.

Durable Couplings:
Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having your hard pipe or other equipment break.

Note: This coupling kit fits aFe intercooler tube (46-20239-B, 46-20229-B/R, 46-20222-B) Only.

On turbocharged motors, the intake piping is put under constant pressure while the engine is running, and has to hold that pressure without leaking. Unfortunately the smallest amount of damage or defect on the intake hoses and the pressure can cause a leak, leaving you without proper boost pressure.  Replace your leaking pressure pipe and stop loosing boost.

Product Features and Specifications:

• +13 HP / +13 lbs. x ft. Torque max gains
• Outflows factory intercooler tube by 18%
• Retains the factory style throttle body and intercooler quick connections made from 6061-T6 Billet Aluminum
• 2-1/2" to 3" Cold-Side mandrel-bent aluminum tubing
• Powder-coated wrinkle-black for heat resistance
• 1/8" NPT ports, are provided for connecting pressure sensors or water methanol injection
• 5-Ply Polyester Reinforced Silicone coupling for strength
• Includes premium stainless steel clamps for a secure fit
• For use with the factory or aFe intercooler (46-20231)
• Includes hardware for a hassle-free installation
• For use with manual transmission vehicles ONLY

Boost the performance of your Mini with the Stage-2 intake system, delivering up to 18HP and 20lbs. x ft. of torque over stock, while increasing airflow by 49%. This advanced system features a large 360-degree high flow PRO DRY S air filter for maximum filtration and convenience. The heat shield, made of durable 16-gauge steel, positions under the factory hood scoop to provide cool, dense air for optimal performance.

• Increased horsepower and torque for enhanced performance
• Superior airflow and filtration with the 360-degree high flow PRO DRY S air filter
• No-oil design of the air filter allows for easy cleaning with soap and water
• Top-mounted heat shield design ensures hassle-free installation using factory mounting locations
• Bump lock filter mounting design securely mounts the air filter to the heat shield without additional hardware
• Simple installation process eliminates the need for couplers and reduces installation time

This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2012-2016 BMW 328i (F3X) 12-16 L4-2.0L (t) with the N20 engine, this BladeRunner intercooler utilizes a 5" bar and plate core design. This design outflows the factory tube and fin core design, while the 3/16" TIG-Welded end tanks offer superior strength and durability. In testing, this intercooler showed flow gains up to 21% and lowered the intake air temperatures.

End Tanks: 
The unique BladeRunner end tanks are constructed out of 3/16" thick aluminum plates and include two 1/8" NPT ports for sensors or water-methanol injection.

5" Bar and Plate Core Design:
The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory.

TIG-Welded:
100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks.

Pressure Tested: 
The BladeRunner Intercooler is test pressure rated at 200psi.

Cold Side Tube:
Constructed of 2-1/2" to 2-3/4" mandrel-bent aluminum tubing and powder-coated wrinkle-black for heat and corrosion resistance. The smooth transition mandrel bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tube from engine heat and protects the tube from corrosion. Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone coupling for strength.

Perfect Fit:
Utilizes the factory mounting locations for a hassle-free installation. The intercooler and tubes utilize billet factory style quick connects to assure a leak-free connection.

Also Fits:
2014-2016 BMW 128i/ix (F20/21) L4-2.0L (turbo) N20
2014-2016 BMW 228i/ix/220i (F22/23) 14-16 L4-2.0L (turbo) N20
2013-2016 BMW 320i/ix (F30/31/34) L4-2.0L (turbo) N20
2012-2016 BMW 328ix (F30) L4-2.0L (turbo) N20
2013-2016 BMW 328i/ix (F31/34) L4-2.0L (turbo) N20
2014-2016 BMW 420i/ix (F32/33) L4-2.0L (turbo) N20
2014-2016 BMW 428i/ix (F32/33/36) L4-2.0L (turbo) N20

Note: This intercooler kit is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.

This Momentum intake system produced up to 28hp and 31lbs. x ft. torque and outflows the factory intake by 29%. This intake system uses twin black rotomolded airboxes that keeps warm engine air out for maximum performance. The housing uses a unique Patent Pending filter to housing interface that enables us to use the largest filters possible while maintaining a simple hassle-free installation. The kit comes complete will all necessary hardware. This intake utilizes dual, 6-1/2" tall conical The PRO 5R performance air filter features 5-layers of progressively finer mesh cotton gauze media and is constructed with 100% polyurethane for long life and multiple cleaning cycles.

Unique One-Piece Dual Housings:
The smooth one-piece high quality sealed dual housings with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style.

High Quality Tubes:
This system uses a high quality plastic CAD designed, dyno-tuned, roto-mold intake tubes to achieve maximum power gains while maintaining a perfect fit.

Large 5-Layer Performance Air Filter:
The Momentum intake is designed around a pre-oiled, large 6-1/2" Tall round inverted top 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

Premium Hardware:
Premium clamps and reinforced silicone couplings are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Features and Specifications:

• +28 HP / +31 lbs. x ft. Torque max gains
• Outflows factory intake system by 29%
• CAD-Designed Roto-Molded Intake Tubes
• High Quality One-Piece Sealed Dual Housings with Auxiliary Air Scoop
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Pro 5R pre-oiled, washable/reusable air filter for maximum performance
• Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
• No Cutting or Drilling on OEM Parts for Faster Installation

Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

This fully TIG-welded bar & plate design intercooler from aFe is 25% larger than stock, outflowing the factory intercooler and tubes by 21% and substantially lowering intake temperatures. Intercooler and tubes bolt into place with factory-style connections.

Fits the Following BMWs:

F30 335i N55 automatic transmission only