BMW Suspension Bushings & Mounts

Upgrade your drivetrain performance with ECS Tuning Performance Polyurethane Differential Bushings—engineered specifically for BMW F8x/G8x models and designed to deliver superior power transfer, durability, and driving precision.

Factory rubber differential bushings are built for comfort, absorbing vibrations between the differential and chassis during everyday driving. However, they are a known wear item that degrade over time—especially under spirited or aggressive driving conditions. Many F8x/G8x owners experience premature cracking and wear, leading to excessive drivetrain movement, reduced throttle response, and unwanted wheel hop.

ECS Tuning’s in-house engineered polyurethane differential bushings provide a high-performance solution to these common issues. By significantly reducing drivetrain deflection, these upgraded bushings enhance throttle response, improve handling stability, and minimize wheel hop—resulting in a more connected and controlled driving experience.

Constructed from durable 95A durometer red polyurethane and paired with precision CNC-machined 6061-T6 aluminum sleeves, these bushings are built to withstand extreme driveline forces while maintaining street-friendly comfort. Unlike solid or delrin mounts, ECS polyurethane bushings strike the perfect balance between performance and daily drivability—delivering increased rigidity without excessive noise, vibration, or harshness (NVH).

Whether you're carving canyon roads, launching at the drag strip, or simply commuting, these performance differential bushings ensure more efficient power delivery from the differential to the wheels—giving you better throttle modulation, traction, and overall control.

Key Features & Benefits:

Performance polyurethane differential bushings for BMW F8X models
Reduces drivetrain movement and improves power transfer
Enhances throttle response and minimizes wheel hop
95A durometer polyurethane for optimal balance of performance and comfort
CNC-machined 6061-T6 aluminum inserts with Type II black anodizing for corrosion resistance
Resistant to oil, chemicals, ozone, and road salt for extended service life
Designed to handle high torque loads and extreme driving conditions
Engineered using real-world load data and worst-case operating scenarios
Maintains street-friendly NVH levels compared to solid mounts
Replace worn factory bushings with ECS Performance Polyurethane Differential Bushings and experience tighter handling, improved drivetrain response, and long-lasting reliability.

For all 2001 to 2005 325xi and 330xi. For convenience, we have assembled this bushing carrier bracket kit, to save you time when changing our control arm bushings. It includes two bushing carriers with pre-installed bushings (one left, one right) and mounting bolts.

 These bushing brackets fit all 2001, 2002, 2003, 2004, and 2005 model BMW 325xi and 330xi.

Want a race-spec rear shock mount but with the comfort of a factory bushing? This ECS rear shock mount combines the precision and articulation of a spherical bearing with the isolation of urethane bushings. The stainless monoball bearing is lined with PTFE lubricant and suspended in 80A urethane and housed in a hard anodized 6061-T6 aluminum mount. The spherical bearing is a better design than most rear shock mounts because it allows the shock to move and tilt without side-loading the shock shaft (which leads to premature failure of the shock). Most Genuine BMW and aftermarket shock mounts are not designed for shock angles and the stress that track or performance driving will put on the shock shaft. The ECS shock mount is properly designed to handle these loads. The internal bearing is also replaceable - it will be years before you have to replace the entire mount. The ECS mount is fully encapsulated to prevent the common shock mount failure of the stock mount design.

ECS RSM features:

• Maintenance free, PTFE lined, stainless steel monoball spherical bearing for full shaft articulation
• 80A polyurethane isolation bushings for NVH control
• Accommodates 10mm, 12mm, or 14mm damper shafts
• Fully constrained shaft mount makes RSM blow out impossible
• Hard anodized 6061-T6 construction
• Fully rebuildable design

* - the RSM comes with the BMW standard 10mm shock shaft bushings. 12mm is used on some performance shocks and 14mm is used on some true motorsport rear shocks.

This package of OEM E82 E90 E92 diff mounts replaces the stock rubber diff bushings. On a tuned 335i you may have noticed more driveline shudder or problems hooking up during hard launches. What happens is the stock rubber bushings are under constant flex as engine torque is transmitted through the differential. Under normal driving with a stock car the bushings are rarely stressed. But factor in significant additional torque from a tuned N54/N55 and the stock rubber will quickly show its weaknesses. You may have even broken a diff bolt or two as the heavy differential shifts around. Even non-turbo E82 and E9X models may benefit from fresh bushings.

This is a set of stock rubber bushings, made by OEM supplier Lemforder. They are the same as the Genuine BMW E9X diff mount bushings, but without the more expensive branding. If you're turned off by potential side effects of urethane or Delrin then the OEM diff mounts are your best option. The OEM mounts fit and perform just like the originals so there is no second guessing their quality. If you're looking for an upgrade we offer E9X solid Delrin and aluminum diff mounts that work well, even in street applications.

E9X Diff Mount Set includes:

• 33176760287 x 2, front differential mount
• 33176770866 x 1, rear differential mount
• (new hardware is optional and can be ordered separately below)
  
  This item fits the following BMWs:
  2008-2012 E82 BMW 128i 135i
  2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
  2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
  2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
  2007-2013 E93 BMW 328i 335i - Convertible

This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

We sell the basic strut and shock mount package, which includes:

• Front strut mounts (also known as guide support)
• Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
• Front strut tower paper washer gaskets
• Front and rear self-locking mounting nuts
• Rear Lifetime Warranty 'Repair Shop' shock mounts
• Rear shock mount reinforcements (to prevent cracking of shock towers)
• Rear shock mount gaskets

In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.

We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

This item fits the following BMWs:
1996-1999 E36 BMW M3
1996-2002 Z3 BMW 2.5 2.5i 2.8 3.0i M Coupe