BMW Engine Parts for BMW 3 Series G20 (2019+)

Our B Series ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Ignition coils are responsible for 1/3 the operation your engine and it would be smart to weigh the options when shopping. Turner B Series ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
Direct fitment
Signature Turner Blue finish

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)

At Turner we love the B58 and we love carbon fiber. The answer was clear we need to combine the two and the result is amazing. Our carbon ECU cover looks so great along side of the B58 and can transform the appearance of your engine bay in just minutes. One of the first things you do with a new car is take care of all the simple modifications to get the best out car without taking it apart. Simply remove your factory ECU cover and install the carbon cover in the factory location!

Our Turner B58 Carbon ECU cover starts with mold of the original ECU cover to get the best factory-form fitment possible. The cover is made from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. Be sure to check out our other incredible carbon fiber pieces we offer to enhance your B58.

Reduces chassis flex for improved handling and control. Beautiful carbon weave for both a functional and aesthetic enhancing upgrade for your G20 or G42!

The G20 and G42 come in a variety of different models offering a variety of performance options. Whether you have a B48 or B58 they both provide an exhilarating driving experience but are missing a key component found on the M3 and M4, chassis bracing. Taking performance cues from the more performance based "M" chassis we are able to bring an immense value add to your new 2 or 3 series to get the most out of your driving experience with our new 3-point strut brace. This is the only strut brace on the market that takes the handling characteristics from the M3 and puts them to use on your vehicle.

An instant upgrade with no modification needed. Fits directly on your vehicle utilizing factory hardware and supplied stud kit. Designed for both street and track use this 2 piece strut brace is mounted together to create one uniform brace for the best improvement in handling.

Strut tower braces are an excellent and common handling upgrade that work by bracing the shock towers together to reduce chassis flex during cornering. Our engineers designed and tested our one of a kind carbon fiber strut brace in-house to increase chassis rigidity and improve handling during aggressive driving in your 2 or 3 series G chassis BMW. Turner Motorsport has engineered a lightweight* and extremely rigid strut brace kit comprised of carbon fiber with billet aluminum end brackets that will not only enhance your driving experience but also provide an eye-catching addition to your engine bay. This addition gets your chassis once step closer to competing with the BMW M cars that come equipped with factory strut braces!

Our Turner Carbon Fiber Strut Tower Brace for your G20/G42 is incredible! Not just a show piece, This front strut brace is a precision engineered structural component that ensures power is transferred properly and not lost through chassis flex, without any increase in NVH. Adding the strut tower brace allows cornering load to be distributed more competently between both strut towers to reduce chassis flex, preventing changes in wheel alignment geometry that can negatively impact handling.

Carbon fiber is an excellent addition on any vehicle, and offers a very unique look that is found on some of the most exotic vehicles on the road today. This strut brace kit features a clean woven design that is sure to look phenomenal for years to come, and will absolutely compliment your engine bay. This kit includes everything you need for installation.

Design:

CAD designed for perfect integration with the stock mounting locations and features in the engine bay.
Utilizes the factory mounting hardware and supplied mounting studs
Designed with an oval cross-sectional area for increased rigidity
Manufactured using structural carbon fiber with a 2x2 twill weave outer layer for increased rigidity and a great look in the engine bay.
The aluminum chassis mounts are machined from 6061-T6, type II black anodized and bonded to the carbon structure to ensure secure and strong mounting of the strut brace to the chassis.
Performance and Benefits:

Increases structural rigidity of the chassis
Direct fitment
Functional and aesthetic upgrade
Hand-laid Gloss Carbon Fiber
Billet aluminum mounting

Upgrade your engine build with Turner's WPC-treated Race Series Bearings, engineered for serious performance enthusiasts. Starting with ACL’s high-performance bearing shells, these Race Series bearings are built to withstand extreme RPMs and stress. Utilizing a "Duraglide" tri-metal construction and a high-strength overlay plate, these bearings offer superior oiling and heat resistance for high-RPM operation.

Our WPC-treated bearings take ACL’s already impressive design and enhance it even further. The WPC treatment process strengthens and smooths the bearing surface by firing high-speed, ultra-fine particles at the bearing shells, reducing friction and improving durability. This advanced surface treatment ensures smoother operation and improved heat dissipation, which are critical for any high-performance engine.

Key Features:

Duraglide Tri-Metal Construction: ACL's Race Series bearings feature a high-strength overlay for enhanced performance. Optimized Oiling: Designed to promote better oil flow during high-RPM conditions. Precise Fitment: Manufactured with OEM-level precision using micron tolerance machining. WPC-Treated for Strength: Surface treatment adds strength and reduces friction for improved engine performance. No Flash Plating: Allows for better heat transfer and bearing retention. Thermal Discharge Process: Smoother, stronger components through WPC’s unique thermal discharge technology. Enhanced Heat and Friction Resistance: Built to combat the biggest enemies of high-performance engines. Don’t settle for standard bearings—choose Turner Motorsport WPC-treated Race Series Bearings for the ultimate engine performance upgrade. Perfect for your next engine rebuild or rod bearing service!