Port Injector Plugs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

Spark Plug Gapper Tool BMS Billet

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW B58TU (B5...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:43378540

Part#: B58G2OFH

Back Ordered

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.

Billet Oil Filter Cap

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21045500

Part#: BMS-BOFC

In Stock

Starting at $ 79.00 USD

Add to Wish List

Starting at $ 79.00 USD

Add to Wish List

The Burger Motorsports billet aluminum B58 oil filter cover directly replaces your weak OE plastic cap for greater protection, ease of removal/install, and great looks under the hood. You can use a 3/8" inch drive ratchet or torque wrench to install and remove. The built-in 32mm hex head does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter insert. Anodized for protection. This quality part is a must for any serious BMW owner. Install: After removing the OEM oil filter cap, remove the filter and be sure to remove the plastic oil filter bypass valve and transfer it to the new BMS billet oil filter cap. Be sure to replace the exterior o-ring gasket also when installing. Features and Benefits Solid aluminum design is much stronger than brittle plastic Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter insert and o-ring Anodized for protection Looks great under the hood Available in black, red, silver, and blue Made in the USA

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:583132

Part#: BMSBSPGT14MM

Ships in 7 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

Burger Motorsports Blow Off Valve Adapter - Gen3 B58

For the later Gen3 B58 engine only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38655170

Part#: BMS-BOVA-G3B58

In Stock

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

The Burger Motorsports Blow-Off Valve (BOV) Adapter for Gen3 BMW B58TU2 installs between the OE bypass solenoid and the vehicle, venting unused charge air to the atmosphere for the iconic "Pshhhh" turbo sound that enthusiasts love.

Show More Show Less

BMS Oil Catch Can Kit - B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21045538

Part#: BMS-CC-GB58

Ships in 1 Business Day

Starting at $ 248.00 USD

Add to Wish List

Starting at $ 248.00 USD

Add to Wish List

It's no secret that the B58 BMW turbo motors can suffer from oil control problems causing the oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller/lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems Burger Motorsports designed their oil catch can kit from the ground up specifically for the B58 turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in the USA. KIT INCLUDES (1) BMS N54 Oil Catch Can (1) Billet B58 bracket (1) 90º billet fitting/nipple (1) Custom Silicone inlet hose (1) 3.5" Straight hose (2) Stainless steel bracket screws #10-32 x 1/2" internal hex socket head Includes BMS intake silencer delete for installation with factory intake.

Show More Show Less

BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit - G2X/G42/A...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49822554

Part#: BMSB58OCCFCDV

Ships on Jul 28, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Keep crankcase vapors in check and your intake air clean with the BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit for the Gen2 B58. This upgrade ditches the flimsy factory venting in favor of a precision CNC-machined billet oil filler cap and dual-vent fittings engineered to handle increased crankcase pressure under boost. By diverting oil-laden vapors into a catch can instead of back through the intake, this system helps minimize carbon buildup, reduces oily contamination, and promotes more consistent performance as power levels climb. High-quality hoses and fittings ensure a secure, leak-free install that won’t collapse under pressure and maintains a clean, OE-plus appearance in the engine bay. An easy, effective upgrade for B58 enthusiasts looking for cleaner operation, improved engine longevity, and proven performance-focused design

Show More Show Less

BMS Oil Catch Can - BMW G2X G42 B46/B48 2.0L

For models with the Gen2 B48 (B48D / B48TU) engine only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46959262

Part#: BMSOCCB48G2X

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

For turbocharged BMWs, oil control issues have always been a slight headache. Burger Motorsports has designed a new oil catch can system specifically for the BMW Gen2 B46/B48 engine to address these issues. Featuring 100% CNC machining with zero welding for a precision fit and long life, the can itself is guaranteed for the life of the vehicle. The included hose exceeds the OEM PCV piping in diameter, and that flow rate is maintained throughout the entire oil catch can, ensuring no horsepower-robbing crankcase pressure buildup. The BMS oil separator maintains the factory's fully closed-loop PCV operation, preventing any PCV vapor from escaping into the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. The install takes around 10 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in the USA.

Show More Show Less

CP Carrillo Pro-Xtreme Connecting Rod Set - BMW B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:40478118

Part#: CAR-CRS-B58-XT

Back Ordered

$ 2,299.99 USD

Add to Wish List

Qty

$ 2,299.99 USD

Add to Wish List

Ensure your engine can handle the power and all the boost thrown at it with these 5150 AutoSport Pro-Xtreme connecting rods manufactured by CP Carrillo. These rods are precision-engineered for high horsepower and high RPM applications, ensuring superior durability for turbocharged builds, drag racing, or street/strip use.

Show More Show Less

JB4PRO Flex Fuel Add On Harness - B58/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

Turbo & Intake Heat Shield - Gen2 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49857413

Part#: BMSG2B58THS

Ships on Jul 28, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

Burger Motorsport Oil Catch Can - G-Chassis Gen 3 B58

For 2025+ models with the Gen3 B58 engine

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46993589

Part#: G3B58OCC

Ships on Jul 28, 2026

Starting at $ 219.00 USD

Add to Wish List

Starting at $ 219.00 USD

Add to Wish List

It's no secret that B58 BMW turbo motors can suffer from oil control problems, causing the oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels and the higher the mileage, the more apparent these problems become. The solution to this problem has finally arrived. The Burger Motorsports oil catch can. While there are other catch cans on the market, they all fall short in various areas. Some are mounted on the hot/turbo side of the motor, preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation, causing internal motor/ring sealing issues. Some have insufficient or no internal baffle systems, while others have internal baffle systems that are too restrictive. Some even bypass the PCV system altogether, venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller/lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems, Burger Motorsports designed their oil catch can kit from the ground up specifically for the 2025 and newer Gen 3 B58 turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter, and that flow rate is maintained throughout the entire oil catch can, ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation, preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Installation takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes.

Show More Show Less

Turbo & Intake Heat Shield - Gen1 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49857410

Part#: BMSB58THS

Ships on Jul 28, 2026

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Keep heat where it belongs and boost where it counts with a B58 Turbo & Intake Heat Shield for BMW and Toyota Supra—an OE-plus style upgrade that helps your setup stay cooler, more consistent, and happier when you’re leaning on it. BMW’s factory heat management is fine at stock-ish levels, but once you start turning the wick up, the turbo becomes a rolling space heater. That radiant heat soaks the nearby intake tract, nudging IATs up and making performance less repeatable pull after pull. This shield steps in as a dedicated barrier between the turbo and intake components, helping reduce heat soak so you can keep intake air cooler and denser when you’re driving it like you mean it. Built with a clean, factory-inspired mindset, it’s precision-formed to wrap neatly around the B58 turbo and intake area, and it mounts using factory locations for a tidy, OEM-level install. No cutting, no permanent changes, and fully reversible—just a straightforward bolt-on that looks right at home in the engine bay. Made from durable, heat-resistant materials, it’s designed to handle the heat long-term without turning into a crispy science project. Why it matters Cuts down radiant heat from the turbocharger into the intake area Helps reduce intake air temperature creep Improves consistency during repeated pulls and hard driving Adds protection for surrounding components exposed to turbo heat Features & highlights Designed for BMW B58 and Toyota Supra applications Precision-formed for OEM-level fitment Heat-resistant construction for long-term durability Bolt-on install using factory mounting points Clean, OE-plus under-hood appearance

Show More Show Less

CP Carrillo PRO-H Performance Connecting Rod Set - w/ 3/8" CARR Bolts...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:50521388

Part#: SCR13034-6

In Stock at Vendor

$ 2,189.99 USD

Add to Wish List

Qty

$ 2,189.99 USD

Add to Wish List

CP Carrillo's PRO-H connecting rods offer exceptional strength and durability for use in high-performance racing engines, capable of withstanding extreme, abusive forces. These rods are made from a proprietary alloy called Carrilloy and utilize an H-beam design for lower weight without compromising strength. This connecting rod set also includes CARR bolts, a multi-phase bolt rated to 285 KSI, which are good for unlimited torque cycles if not overstretched or overheated.

Show More Show Less

CP Carrillo PRO-H Performance Connecting Rod Set - w/ 3/8" WMC Bolts ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49648346

Part#: SCR13492-6

In Stock at Vendor

$ 1,845.99 USD

Add to Wish List

Qty

$ 1,845.99 USD

Add to Wish List

CP Carrillo's PRO-H connecting rods offer exceptional strength and durability for use in high-performance racing engines, capable of withstanding extreme, abusive forces. These rods are made from a proprietary alloy called Carrilloy and utilize an H-beam design for lower weight without compromising strength. This connecting rod set also includes WMC bolts, made from H11 tool steel and rated to 220 KSI, which are good for 15-18 torque cycles.

Show More Show Less

Carrillo B48 Forged Connecting Rod Set - Includes WMC Rod Bolts - BMW...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7624642

Part#: CAR-CRS-B48-WMC

Ships on Jul 28, 2026

$ 1,399.99 USD

Add to Wish List

Qty

$ 1,399.99 USD

Add to Wish List

Carrillo connecting rods are well known within pro racing and street performance circles for good reason; they produce a premium product that winning racers around the world depend on. Quality and pride go hand-in-hand at Carrillo Industries. Manufacturing a Carrillo rod is much more than cutting a forging, meeting production goals, and shipping deadlines. Every Carrillo rod is made with the goal of winning in mind and the Carrillo rods are a proven performer in both street and racing B48 engines. Carillo's fasteners and "Carrilloy" rods have proven popular with all racers who want the best. Special Chrome-Moly based alloy Forged Rods Lightweight Design for low mass Vs. Stock Strong and proven in racing Excellent quality control Tight tolerances and balancing Includes High-Quality Non-stretch WMC Rod Bolts

Show More Show Less

Carrillo Connecting Rod Set - With WMC Bolts - B58 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22591958

Part#: CAR-CRS-B58-WMC

Ships on Jul 28, 2026

$ 2,057.99 USD

Add to Wish List

Qty

$ 2,057.99 USD

Add to Wish List

Unleash Performance with Carrillo Connecting Rods

Carrillo connecting rods enjoy a well-deserved reputation among pro racing and street performance enthusiasts. The reason is simple: Carrillo Industries consistently delivers a top-tier product that racers worldwide depend on for their victories.

At Carrillo Industries, a deep commitment to quality and excellence is at the heart of everything they do. Crafting a Carrillo rod transcends mere production; it's about the pursuit of victory. Carrillo rods have demonstrated their performance prowess in both street and racing applications, especially in B58 engines, making them a trusted choice for performance aficionados.

Key Features:

Special Chrome-Moly based alloy Forged Rods
Lightweight design for reduced mass compared to stock
Proven strength in racing
Exceptional quality control
Precise tolerances and balancing
Includes high-quality Non-stretch WMC Rod Bolts

Tech Notes:

WMC Bolts are the standard hardware included and serve as excellent fasteners. For applications demanding extreme output and all-out racing, the CARR bolt option excels in maintaining maximum RPMs and HP levels.

Show More Show Less

Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46924974

Part#: B58OFBC-BO

Back Ordered

$ 82.00 USD

Add to Wish List

Qty

$ 82.00 USD

Add to Wish List

The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. A removable black block off cap is included to use the cap with no ventilation, but any custom ventilation solution using a -10ORB fitting can be used with this oil filler breather cap.

Show More Show Less

Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Brea...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46924977

Part#: B58OFBC-90F

Back Ordered

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. This kit includes a -10ORB 90º breather to -10AN Fitting to connect to an oil catch can of your choice.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 4 Series G22 (2021+)

Sub-Categories

Port Injector Plugs

Spark Plug Gapper Tool BMS Billet

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW B58TU (B5...

Billet Oil Filter Cap

Billet Spark Plug Gapper Tool - 14mm - BMS

Burger Motorsports Blow Off Valve Adapter - Gen3 B58

BMS Oil Catch Can Kit - B58

BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit - G2X/G42/A...

BMS Oil Catch Can - BMW G2X G42 B46/B48 2.0L

CP Carrillo Pro-Xtreme Connecting Rod Set - BMW B58

JB4PRO Flex Fuel Add On Harness - B58/S58

Turbo & Intake Heat Shield - Gen2 B58

Burger Motorsport Oil Catch Can - G-Chassis Gen 3 B58

Turbo & Intake Heat Shield - Gen1 B58

CP Carrillo PRO-H Performance Connecting Rod Set - w/ 3/8" CARR Bolts...

CP Carrillo PRO-H Performance Connecting Rod Set - w/ 3/8" WMC Bolts ...

Carrillo B48 Forged Connecting Rod Set - Includes WMC Rod Bolts - BMW...

Carrillo Connecting Rod Set - With WMC Bolts - B58 3.0L

Unleash Performance with Carrillo Connecting Rods

Key Features:

Tech Notes:

Burger Motorsport Billet Oil Filler Breather Cap - W/ Removable Block...

Burger Motorsport Billet Oil Filler Breather Cap - W/ -10ORB 90* Brea...

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results