Showing 6599 results for ""

Sort By:

B3X/B4X Oil Filter Splash Shield
On vehicles with the transverse mounted B46 or B48 engine variants
Genuine BMW - Corporate Logo
T#:19230373
Part#: 83305A7B9D5
Ships in 8 Business Days
$ 68.99 USD
Free Shipping on orders $49 and up
$ 68.99 USD
Free Shipping on orders $49 and up
Splash Shield for oil filter removal on B46 and B48 engine variants
Air Lift - Corporate Logo
T#:384246
Part#: 27703
In Stock
$ 173.99 USD
Free Shipping
$ 173.99 USD
Free Shipping
Integrate an Additional Compressor with Air Lift Performance 3H/3P Control System for your BMW. This specialized harness is designed for BMW enthusiasts who want to enhance their Air Lift Performance 3H/3P Control System by seamlessly integrating a second compressor. Elevate your BMW's air suspension capabilities to new heights with this innovative kit. Key Features: Pre-wired 50/30 Amp Relay: The harness includes a pre-wired 50/30 amp relay with a weather-tight connector, ensuring optimal electrical performance and protection. 30 Amp Fuse with Holder: A 30 amp fuse with a holder is provided to safeguard the electrical system and components, preventing any potential overloads. Solderless Wire Connectors: The kit includes solderless wire connectors, simplifying the installation process and ensuring secure electrical connections without the need for intricate soldering. Upgrade your BMW's air suspension system with this easy-to-install harness, allowing for the integration of a second compressor into your Air Lift Performance 3H/3P Control System. Experience improved performance and control with this essential addition.
Show More Show Less

Schumacher - Corporate Logo
T#:383699
Part#: SHUSP200
Ships in 7 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Charge/maintain your 12 volt battery with sunshine

5150 Autosport - Corporate Logo
T#:25241787
Part#: ARP-MSK-B58
Ships in 4 Business Days
$ 229.99 USD
Free Shipping on orders $49 and up
This ARP Main Stud Kit is designed to replace BMW part numbers 11128644674 and 11127613127 for the B58; B58A, B58C, B58D engines found in varies BMW chassis One significant advantage of these main studs is their ability to prevent main cap walk, which can occur when the main caps shift or move out of position, potentially causing damage to the engine. In addition, ARP Main Studs can safeguard the threads of your engine block, providing an extra layer of protection against potential damage. When opting for main studs instead of factory bolts, it's important to note that the engine builder should mic the bores. Using studs may require a line hone to ensure proper fitment and alignment. A line hone is a machining process that can be used to resize and reshape the main bearing bores, ensuring that they are perfectly round and concentric. This is crucial for ensuring proper oil clearance and preventing premature bearing wear. By mic'ing the bores and performing a line hone if necessary, engine builders can ensure that the main studs are installed correctly and that the engine will perform reliably and at its best.
Show More Show Less
Gear Wrench - Corporate Logo
T#:3729711
Part#: KDT81354
Ships in 4 Business Days
$ 14.99

This product was last offered at the strikethrough price on
06-18-2026

$ 8.99 USD
Free Shipping on orders $49 and up
$ 8.99 USD
Free Shipping on orders $49 and up
Adapts 1/2" to 3/8"

OEM Tools - Corporate Logo
T#:641228
Part#: OEM24481
Ships in 7 Business Days
$ 255.99 USD
Free Shipping
$ 255.99 USD
Free Shipping
Try the convenience of cordless power tools.

Innovate Motorsports - Corporate Logo
T#:26038548
Part#: INN3851
In Stock at Vendor
15% off MSRP $ 221.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 189.00 USD
Free Shipping on orders $49 and up
15% off MSRP
$ 221.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 189.00 USD
Free Shipping on orders $49 and up
Upgrade your BMW's monitoring capabilities with the new Innovate Motorsports MTX Digital Series “Dual Function” Gauges. These 2 1/16” (52mm) gauges offer versatile performance monitoring with interchangeable faceplates and bezels. Featuring locking connectors for simplified installation and MTS serial connections for seamless integration with other Innovate devices, these gauges provide comprehensive data logging capabilities.
  • Versatile display range for Boost and Shift monitoring
  • Interchangeable faceplates and bezels for customization
  • Simplified installation with locking connectors
  • Seamless integration with other Innovate devices for logging
  • Over Boost Warning for added safety
  • Progressive or Single Stage Shift Light options
Show More Show Less

AGA Tools - Corporate Logo
T#:42638595
Part#: AGA-JR-14-24
Ships in 8 Business Days
$ 140.99 USD
Free Shipping on orders $49 and up
Transform your floor jack into a reliable, stable jack stand with the AGA Jack Rod Stand XL.
Rennline - Corporate Logo
T#:28637274
Part#: I77.86.BBL
Ships in 6 Business Days
$ 450.00 USD
Free Shipping on orders $49 and up

Upgrade the steering wheel of your BMW or MINI with the Rennline Leather Steering Wheel - Black Spokes & Black Horn Ring. This leather steering wheel features black spokes and a black horn ring, adding a sleek and stylish touch to your vehicle's interior. Engineered for durability and comfort, this steering wheel provides a comfortable grip and precise control. Elevate the driving experience of your BMW or MINI with this premium leather steering wheel.

  • Sleek and stylish design with black spokes and horn ring
  • Engineered for durability and comfort
  • Provides a comfortable grip for enhanced driving experience
  • Compatible with both BMW and MINI models
Show More Show Less
QuickJack - Corporate Logo
T#:40748601
Part#: 5175638
Ships in 5 Business Days
$ 2,225.00 USD
$ 2,225.00 USD
This QuickJack package deal includes the 6000TLX extended car lift, a set of QuickJack wall hangers (T#913727), and a set of four pinch weld blocks (T#840364). The 6000TLX has a maximum lifting capacity of 6,000-lb. It is the highly anticipated sequel to QuickJack's popular 5000TLX car lift. With its extended lift point reach of 6 inches more than the 6000TL for longer wheelbases and the ability to lift an extra 3 inches, the 6000TLX portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 6,000-lbs. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook-up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all. Working in a garage can become troublesome when stuck with only a jack and a few jack stands. Not only are jack-stands very unsteady at raised heights, but they also require the long, tedious process of raising each corner individually. Eliminate this issue with a vehicle lift that is unlike any other lifting system you have seen! QuickJack can raise your vehicle with the push of a button, raising your vehicle to the lift's maximum height in just seconds. This allows you complete access to service your vehicle's suspension, drivetrain, and underbody, without any crossbeams to get in your way. Also, keeping safety paramount, QuickJack uses rugged, welded steel construction for strength and rock-solid stability, and features auto-locking bars that lock the lift and vehicle at a set height until you are finished. This ensures the lift will never fail with you underneath, standing up to the toughest real-world garage and track conditions. **INTERNATIONAL CUSTOMERS NOTE** We are unfortunately unable to offer QuickJack internationally at this time. All international orders will be cancelled.
Show More Show Less


Gear Wrench - Corporate Logo
T#:5760284
Part#: KDT81230T
Ships in 7 Business Days
$ 267.99 USD
Free Shipping on orders $49 and up
90 teeth deliver a 4° swing arc for easy access
Race Ramps - Corporate Logo
T#:641862
Part#: RR-FS-16-SC
Ships on Jul 31, 2026
$ 342.99 USD
$ 342.99 USD
16" with flatstoppers car storage ramps - 4 PACK
Permatex - Corporate Logo
T#:2958748
Part#: 82112
Ships in 2 Business Days
$ 18.99 USD
Free Shipping on orders $49 and up
A self-fusing silicone repair tape that has been used by the Military for years!

Titan - Corporate Logo
T#:5760302
Part#: TTN42173
Ships in 7 Business Days
$ 321.99 USD
Free Shipping on orders $49 and up
1/2" drive extension set

19" APEX SM-10 Square Wheel Set - Pick Your Finish
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:19627034
Part#: SM10191140Q
Ships in 5 Business Days
Starting at $ 2,016.00 USD
Free Shipping
Starting at $ 2,016.00 USD
Free Shipping
19x11 ET40 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
OEM Tools - Corporate Logo
T#:585148
Part#: OEM24836
Ships in 7 Business Days
$ 444.99 USD
$ 444.99 USD
Features a quick lift foot pedal

AGA Tools - Corporate Logo
T#:5175721
Part#: AGA-8HP-TA
Ships in 8 Business Days
$ 304.99 USD
Free Shipping
$ 304.99 USD
Free Shipping
Securely pull your 8HP Transmission knowing it wont fall.
Vargas Turbo Technologies - Corporate Logo
T#:20749254
Part#: VTT-DHPLS
Ships on Jul 31, 2026
$ 32.99 USD
Free Shipping
$ 32.99 USD
Free Shipping
These are made from molded plastic for a perfect fit. Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features Stop your Dragy from flying off the dash and having to search for it Position your Dragy in the optimal position for the best satellite coverage VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite The charging port is not blocked and can be accessed with the cover on
Show More Show Less

ESOTERIC Car Care - Corporate Logo
T#:41998808
Part#: ESO.MFWASH.32
Ships in 2 Business Days
$ 22.99 USD
Free Shipping on orders $49 and up
Microfiber wash detergent removes the residues and oils that can be embedded in the fibers of microfiber towels. Esoteric Microfiber Wash is a concentrated cleaner that safely cleans your microfiber towels without damaging the fibers themselves.
Show More Show Less

CSF Universal Large Single-Pass Oil Cooler - Universal Application ...
Universal fitment design - modifications may be necessary to run this cooler
CSF - Corporate Logo
T#:53608839
Part#: 8371
Ships in 4 Business Days
New Item
$ 499.00 USD
Free Shipping
$ 499.00 USD
Free Shipping
CSF redesigned this cooler and went with a more traditional inlet/outlet orientation. The new single pass design features high efficiency and high durability, but with vertically oriented inlet and outlet connections.
Show More Show Less


Rennline - Corporate Logo
T#:37251096
Part#: CC01
Ships in 6 Business Days
$ 121.00 USD
Free Shipping on orders $49 and up
Small VTF Adjuster 100 - 105mm
We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:37925857
Part#: 860100002
In Stock
9% off MSRP $ 32.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 30.00 USD
Free Shipping
9% off MSRP
$ 32.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 30.00 USD
Free Shipping
OEM Tools - Corporate Logo
T#:1362398
Part#: OEM24852
Ships in 7 Business Days
$ 120.99 USD
Free Shipping
$ 120.99 USD
Free Shipping
Safe and secure for Garage use

BavSound Stage One Speaker Upgrade - G29 Z4(Harmon Kardon)
For Vehicles equipped with Harmon Kardon Audio
BavSound - Corporate Logo
T#:5663675
Part#: S1.G29.HK
Ships on Jul 31, 2026
$ 799.00 USD
Free Shipping on orders $49 and up
$ 799.00 USD
Free Shipping on orders $49 and up
This Speaker upgrade dramatically increases output from the OEM audio system. It allows for a tighter, punchier base and crystal clear sound that plays much louder. These speakers are meticulously tuned for your BMW, and provide exceptional clarity, detail, and richness. From woven fiberglass cones, to butyl rubber surrounds and silk composite tweeters, these speakers were designed with ultra-premium quality in mind! This is a simple way to transform your audio without upgrading the amplifier or subwoofers! If you do crave more, you can get even more out of these speakers with the upgraded amplifier from BavSound. Take it one step further with the Ghost Subwoofers also available from BavSound. Features Include: Premium construction for crystal clear sound quality Tighter, Punchier base and treble Easy Installation - DIY/Plug and Play Works with factory amplifier/subwoofers Works with BavSound amplifier/subwoofers 100 Day In-Car Trial with Satisfaction Guarantee Bulletproof 4-year warranty Improve your subpar BMW audio system with a premium sound upgrade from BavSound. BavSound is the industry leader in audio upgrades for BMW applications. This audio equipment is 100% plug and play, resulting in effortless installation and OEM finish. Whether you're hoping to future-proof your classic BMW, or improve the quality of your newer BMW, look no further than BavSound!
Show More Show Less

POR-15 - Corporate Logo
T#:3657965
Part#: POR45408
Ships in 7 Business Days
$ 86.99 USD
Free Shipping on orders $49 and up
Protect your investment with Rust Preventive Paint
MaxJax - Corporate Logo
T#:3165721
Part#: 5215752
Ships in 5 Business Days
$ 194.99 USD
Free Shipping
$ 194.99 USD
Free Shipping
Planning to lift light trucks and SUVs? Get yourself a set of these 5.5" tall height adapters to get the most lifting height from your high-reach lifting points. These optional height adapters are available in sets of 4.
Show More Show Less

SPL Parts - Corporate Logo
T#:587629
Part#: SPL-RTA-G29
Ships in 2 Business Days
$ 404.00 USD
Free Shipping
$ 404.00 USD
Free Shipping
SPL Parts Rear Toe Arms for the 2020+ Toyota Supra increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will effect toe settings, and the wide range of adjustments allows you to maximize grip on a track car and extend tire life on a streetcar.
Show More Show Less
Performance Tool - Corporate Logo
T#:2242230
Part#: M200DB
Ships in 2 Business Days
$ 45.99 USD
Free Shipping on orders $49 and up
Professional style.

Bilstein - Corporate Logo
T#:4469689
Part#: 19-304472
Ships in 4 Business Days
$ 165.00 USD
Free Shipping
$ 165.00 USD
Free Shipping
Bilstein B4 OE Replacement shocks are designed to maintain original ride quality of your vehicle, while meeting or exceeding OE standards. These shocks are an excellent replacement for OE with regard to both cost and quality and Bilstein's world-renown reputation. If your rear end ride quality is becoming increasingly poor over time, it may be time to replace your strut assemblies. Bilstein's B4 series gas shocks are the perfect replacement for a driver looking to replace their worn suspension parts with a reputable aftermarket offering. Can be paired with OE springs. Fits rear both sides. Cross Reference: Autozone 19304472 BMW 33526879207 BMW 33526879208 Toyota 48530-WAA03
Show More Show Less

QuickJack - Corporate Logo
T#:403158
Part#: 5585448
Ships in 5 Business Days
$ 975.00 USD
Free Shipping
$ 975.00 USD
Free Shipping
This power unit kit includes everything you need to operate your QuickJack frames.
Valvetronic Designs - Corporate Logo
T#:28537516
Part#: VTDTIPSLVE3040RC
Ships in 2 Business Days
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
Show More Show Less
Rennline - Corporate Logo
T#:587066
Part#: FE23.76-2IN
Ships in 6 Business Days
$ 85.00 USD
Free Shipping on orders $49 and up
Need to mount a lap timer, communications device, Accessport, or some other device? Rennline now has a quick and easy solution. This accessory mounting plate utilizes the Rennline billet roll cage clamps and has a variety of mounting slots to accommodate all sorts of accessories. Fully CNC machined and anodized, this setup comes with all necessary hardware for a quick and easy installation. Includes two billet roll cage clamps, and 1 accessory mounting plate along with all necessary hardware.
Show More Show Less


Rein Silicone Vaccum Hose - Black - 65 Feet
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Rein - Corporate Logo
T#:378475
Part#: 5173125797120BLK
Ships in 4 Business Days
$ 175.99 USD
Free Shipping
$ 175.99 USD
Free Shipping
Replace your cracked or frayed vacuum lines. 3.5mm
Suvneer Wheel Hanger - M12 X 1.25 - Red
Specifically for vehicles using M12 x 1.25 wheel bolts
Suvneer - Corporate Logo
T#:51356108
Part#: WHLHGR-12125-RD
Ships in 6 Business Days
New Item
$ 17.00 USD
Free Shipping on orders $49 and up
$ 17.00 USD
Free Shipping on orders $49 and up
Take the heavy lifting out of your next wheel rotation with the Suvneer Motorsports™ Wheel Hanger in Red.
CSF - Corporate Logo
T#:23648670
Part#: 8400
EO#: D-770
Ships in 4 Business Days
$ 5,599.00 USD
Free Shipping
$ 5,599.00 USD
Free Shipping
When CSF released the Gen 2 B58 “Super Manifold” for G-Chassis BMW and Supra, it was a smash hit (CSF #8200/8200B). It quickly became the go-to manifold for racers and enthusiasts looking to get the most out of their B58. Over the past two years, people have been pushing the limits of the Gen 2 B58. While the Gen 2 B58 “Super Manifold” has held up amazingly to countless 1000hp builds, customers still wanted more. Well, the wait is over and CSF is proud to introduce the “Race X” Charge-Air-Cooler manifold. Another industry-leading design by the trio of CSF, VF Engineering, and Custom Plenum Creations. The Race X Manifold has many of the features and specs as the Super Manifold in addition to some new race-focused features. The Race X Manifold is designed for high-level motorsports competition and racing applications. The limits of the current Super Manifold are very high and more than enough for many enthusiasts, tuners, and racers. However, those looking to push their Gen 2 B58s to the maximum have been asking for more. Race X features a 25% larger core, additional parameter ports, and an optimized water flow system. The manifold can be used in either dual or single-pass configurations and features a new front port that has been optimized for ice box setups. This is the most versatile and largest manifold available on the market and has been race-tested on some of the fastest B58-powered drag cars in the world. Biggest/Best Core in the Industry Once you get into that 1000hp+ range on the B58, most aftermarket manifolds have reached their limits in terms of flow and cooling capacity. To resolve both limitations, CSF increased the size of the core by 25% over the #8200. The larger core has 15 cooling rows (vs 12 rows on the CSF #8200) and keeps up with the air flow demand while also increasing the cooling capacity. Dual or Single Pass CSF specifically designed the front water end plate of the manifold to allow for a single pass setup or ice box setup. This -16 ORB bung found on the front water plate is the largest available on any aftermarket B58 manifold (competitor’s unit uses a -12 fitting). CSF has teamed up with industry-leading fitting and hose experts Brown and Miller (BRMS) to optimize the water flow out of the front plate. CSF recommends using the following BRMS fittings with a maximum fitting angle of 120 degrees. BRMS is recommended by CSF because there are no flow restrictions on their fittings and are highly regarded as the best in the motorsport industry. Top Feed Port Injection with Included Fuel Rail The CSF Manifold includes an extruded fuel rail which attaches to the outlet side of the manifold. The AN-8 fuel rail comes with a -8 internal hex plug fitting. This allows you to run a returnless fuel system or a full loop setup. Fuel rail aperture for each cylinder is an optimized 7mm opening for compatibility with most commonly used high performance injectors CSF recommends using Injector Dynamics (ID) injectors for the best performance – the most commonly used injector for this engine has been ID model # 1050.34.14.14.6 (qty 6) Anodized CNC machined injector hats (qty 6) are included in the supplied hardware kit to accommodate short height injectors aka “shorties” Individual Nitrous / Methanol Injector Ports A 1/8' NPT port on each cylinder runner can be used for nitrous or methanol injection. The CSF manifold allows for maximum spray control and even spray distribution throughout the engine. A nitrous system set-up specifically for the CSF manifold is available from industry leaders Nitrous Express through Titan Motorsports. Expanded Vacuum and Parameter Pad CSF has included a port pad into the machining of the tank on the manifold inlet side. The ports can be used to measure additional parameters or as an additional vacuum source. The Race X Manifold has two additional 1/4' NPT ports to go along with the standard three 1/8' NPT ports. Each port can be plugged with the included hardware kit if they are not used. Easy Access to Spin-Off Oil Filter CSF incorporated a recessed design towards the back of the manifold that allows easy access to the spin-off oil filter. This means you do not have to remove your manifold every time you want to change your oil. Air Inlet Divider The inclusion of an air divider welded into the inlet side tank of the manifold is another exclusive feature of the CSF manifold. With the length of the manifold, the engineers at VF Engineering wanted to make sure that the volume and velocity of air was consistent to all cylinders. The inlet has an air divider to ensure the best possible airflow and equal cooling performance to each cylinder. Airflow to the back of the manifold (cylinders four, five, and six) should be equal to the airflow to the front of the manifold (cylinders one, two, and three) for the best possible performance. Breather Ports for Inlet/Outlet of Water Tanks Two 1/8' NPT ports are located on the top of the back water plate. These ports can be used to measure inlet/outlet water temps as well as used as breather ports to help in the bleeding procedure. 1/8th NPT plugs come included in the supplied hardware kit. Please follow OEM BMW or Toyota bleeding procedure which takes roughly 15 minutes to complete. Slotted Mounting Tabs Positioning the manifold in the engine bay is fairly straightforward. However, it can be a little frustrating to get the bolt holes on the intake side mounting tabs lined up perfectly. After doing a few test fittings CSF realized this could be resolved by slotting the mounting tabs. This allows the bolts to be installed before final positioning adjustments and makes installation a bit easier. Thermal Rejection Competition Spacer Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The CSF Manifold is made from Billet Aluminum and 100% TIG Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. Hardware Kit, Well Thought-Out Instruction Manual The supplied hardware kit includes all of the brackets, bolts, washers, and CNC machined fittings for installation. This is an industry-exclusive feature to the CSF x VF Engineering design, and was extremely difficult to not only engineer, but to manufacture as well. An array of items come vacuum packaged with corresponding letters listed on an easy to use Bill-of-Materials List (BOM) along with exploded diagrams and a simple order of operation procedure list to follow for installation. Made with mechanics, technicians, racers and DIY enthusiasts in mind. This is a Racing Product and intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Features: Utilizes a High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core 25% larger than the standard Gen-2 B58 Super Manifold (CSF#8200) – 15 Rows of Water Cooling vs. CSF #8200 12 Rows and OEM 6 Rows Core can be setup for dual or single pass configuration The -16 ORB bung on front water end plate can be used to adjust the flow configuration to single-pass and/or to be used with an ice-box setup. Comes with CNC machined plug to use in dual-pass configuration Designed in SolidWorks Using Computational Fluid Dynamics (CFD) Integrated Air Divider in Inlet Tank Evenly Distributes Airflow Throughout the Core Improved slotted mounting holes on throttle body side for easier installation Easy Access to Spin-Off Oil Filter for Quick Oil Changes Integrated Sensor Pad with Two 1/4' and Three 1/8' NPT Ports to Measure Additional Parameters or Extra Sources of Vacuum Included Fuel Rail for Top Feed Port Injection Individual 1/8' NPT Ports on the Top of Each Cylinder Runner for Nitrous or Meth Injection Allows for Even Spray Distribution and Control for Maximum Performance Individual 1/8' NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Bleeding Included KIYLEX Thermal Rejection Manifold Spacer* Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Some modifications to install – this product is intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Includes Hardware and Installation Kit with Picture Diagrams and Instructions Finish: Raw Billet – Made by World-Leading Automotive Machinist Custom Plenum Creations in Australia Optional Powder-Coating and Thermal Rejection Finishes Available – CSF #8400C / #8400B OEM Part Number: Toyota: 17101-WAA01 BMW: 11-61-8-647-977 Applications: B58TU (B58 Gen 2 – B58B30M1, B58B30C, & B58B30O1) 2020+ Toyota GR Supra 3.0L incl Base, Launch, Premium, & A91 2022+ BMW M240i & M240i xDrive (G42) 2018+ BMW M340i & M340i xDrive (G20) 2020+ BMW M440i & M440i xDrive (G22/23/26) 2018+ BMW 540i & 540i xDrive (G30/31) *B85C (2nd gen) motor only 2018+ BMW 640i & 640i xDrive (G32) 2018+ BMW X3 M40iX (G01) 2018+ BMW X4 M40iX (G02) 2018+ BMW Z4 M40i (G29) 2018+ BMW X5 45i, 45iX, 45eX (G05) 2018+ BMW X6 40i 40iX (G06) 2018+ BMW X7 40iX (G07)
Show More Show Less

Valvetronic Designs - Corporate Logo
T#:53149924
Part#: VTDTIPSLVE2535FC
Ships in 2 Business Days
New Item
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
The perfect cherry on top! Our selection of Valvetronic Designs Exhaust Tips gives your vehicle that perfect look, and with various styles and finishes, the customization is endless. Whether you're looking to upgrade your full system or add a set to your universal kit, these exhaust tips help ensure your vehicle looks as good as it sounds!
Show More Show Less

Loctite - Corporate Logo
T#:54388370
Part#: 37564
In Stock at Vendor
New Item
$ 16.99 USD
Free Shipping on orders $49 and up
Track days, scheduled maintenance, suspension tuning if you're wrenching on your BMW or MINI, certain hardware is bound to come off more than once. Brake caliper bolts, suspension arms, and subframe fasteners take a beating from heat, road grime, and time. Don't let your next upgrade turn into a nightmare of sheared bolts and stripped threads.
Show More Show Less
Sunex - Corporate Logo
T#:385984
Part#: 6603ASJD
Ships in 7 Business Days
$ 720.99 USD
$ 720.99 USD
Need a light weight(under 60 Lbs) and heavy duty floor jack? This is the one for you

MMX Magnetic Gear Shifter Paddles - Titanium Silver - BMW F & G Chass...
For models with an M Performance steering wheel only
MMX Performance - Corporate Logo
T#:34415638
Part#: MMR04-0002-TITAN
Ships in 2 Business Days
$ 420.99 USD
Free Shipping
$ 420.99 USD
Free Shipping

Welcome to the ultimate pair of billet magnetic shift paddles for BMW F & G-Series vehicles. Put yourself back in control of your BMW and boost your interior aesthetics with these exquisitely engineered billet magnetic aluminum paddles. Unlike some options, these are fully engineered replacements, not just stick-on covers.

It’s easy to see why the OEM paddle shift can feel weak and spongy—almost underwhelming. That’s where MMX's magnetic system truly stands out. With advanced magnetic shift technology, you’ll experience crisp, responsive gear transitions. Each shift delivers a satisfying click with instant engagement, making every drive more enjoyable and precise.

Manufactured from Aircraft grade T6-6061 aluminum billet, MMX's gear shift paddle set puts you back in control of your BMW to make grabbing the next gear more intuitive and certainly more pleasurable. This added feel and ease of use makes MMX's paddles the natural choice over the slightly disappointing OEM Paddles.

MMX developed these paddle blades with the track in mind, making it easy for you to select gears no matter the steering angle. Because, unlike some stick-on alternatives, they have engineered these to be complete replacement blades, along with new control units.

These shifter blades are available in three anodized finishes to complement the interior of your BMW: Red, Black, or Titanium Silver

Features:

Magnetic shift technology

Kit complete with everything you need

Precise fitment for F & G-Series BMWs

Manufactured from Aircraft grade T6-6061 aluminium billet

Complete replacement blades

Kit supplied with new control units

Designed, engineered and manufactured in the UK

Total rigidity for each gear change and avoiding the horrible bendy/wobbly feel that less rigid paddles offer

The choice of three anodized colors: red, black, or titanium silver

Show More Show Less
BavSound Stage One Speaker Upgrade - G29 Z4(Standard Hi-Fi)
For Vehicles equipped with Standard Hi-Fi
BavSound - Corporate Logo
T#:5663674
Part#: S1.G29.HIFI
Ships on Jul 31, 2026
$ 649.00 USD
Free Shipping on orders $49 and up
$ 649.00 USD
Free Shipping on orders $49 and up
This Speaker upgrade dramatically increases output from the OEM audio system. It allows for a tighter, punchier base and crystal clear sound that plays much louder. These speakers are meticulously tuned for your BMW, and provide exceptional clarity, detail, and richness. From woven fiberglass cones, to butyl rubber surrounds and silk composite tweeters, these speakers were designed with ultra-premium quality in mind! This is a simple way to transform your audio without upgrading the amplifier or subwoofers! If you do crave more, you can get even more out of these speakers with the upgraded amplifier from BavSound. Take it one step further with the Ghost Subwoofers also available from BavSound. Features Include: Premium construction for crystal clear sound quality Tighter, Punchier base and treble Easy Installation - DIY/Plug and Play Works with factory amplifier/subwoofers Works with BavSound amplifier/subwoofers 100 Day In-Car Trial with Satisfaction Guarantee Bulletproof 4-year warranty Improve your subpar BMW audio system with a premium sound upgrade from BavSound. BavSound is the industry leader in audio upgrades for BMW applications. This audio equipment is 100% plug and play, resulting in effortless installation and OEM finish. Whether you're hoping to future-proof your classic BMW, or improve the quality of your newer BMW, look no further than BavSound!
Show More Show Less

QuickJack - Corporate Logo
T#:40748600
Part#: 5175634
Ships in 5 Business Days
$ 2,175.00 USD
$ 2,175.00 USD
This QuickJack package deal includes the 6000TL car lift, a set of QuickJack wall hangers (T#913727), and a set of four pinch weld blocks (T#840364). The 6000TL has a maximum lifting capacity of 6,000-lb. It is the highly anticipated sequel to QuickJack's 5000TL. With the ability to lift an extra 3-inches, the 6000TL portable car lift provides more room to tackle every repair and maintenance task on vehicles weighing up to 6,000-lbs. It also takes seconds to get up and running following initial one-time assembly. Just drop it on the ground and hook up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all. Working in a garage can become troublesome when stuck with only a jack and a few jack stands. Not only are jack-stands very unsteady at raised heights, but they also require the long, tedious process of raising each corner individually. Eliminate this issue with a vehicle lift that is unlike any other lifting system you have seen! QuickJack can raise your vehicle with the push of a button, raising your vehicle to the lift's maximum height in just seconds. This allows you complete access to service your vehicle's suspension, drivetrain, and underbody, without any crossbeams to get in your way. Also, keeping safety paramount, QuickJack uses rugged, welded steel construction for strength and rock-solid stability, and features auto-locking bars that lock the lift and vehicle at a set height until you are finished. This ensures the lift will never fail with you underneath, standing up to the toughest real-world garage and track conditions. **INTERNATIONAL CUSTOMERS NOTE** We are unfortunately unable to offer QuickJack internationally at this time. All international orders will be cancelled.
Show More Show Less

Supersprint - Corporate Logo
T#:588887
Part#: 525826
Ships in 4 Business Days
$ 3,651.99 USD
Free Shipping
$ 3,651.99 USD
Free Shipping
Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price, Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long-lasting construction, and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preference. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!
Show More Show Less
ATD Tools - Corporate Logo
T#:385276
Part#: ATD387
Ships in 7 Business Days
$ 143.99 USD
Free Shipping
$ 143.99 USD
Free Shipping
You never know when you will need another O-ring
Additional Shock Absorber - Front
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:35964553
Part#: 31336854700
In Stock at Vendor
$ 19.99 USD
Free Shipping on orders $49 and up
The bump stop limits strut travel to prevent suspension bottoming. Fits either left or right; one per strut. Replace when installing new strut inserts. Genuine BMW Additional Shock Absorber, Front - This item fits the following BMW Chassis: F31,F33,F36
Show More Show Less


AC Hydraulic - Corporate Logo
T#:558013
Part#: TOL-25-1H
Ships in 4 Business Days
$ 2,911.99 USD
$ 2,911.99 USD

If you have a situation where no amount of positioning or floor jack extensions seem to work to lift your vehicle, you may just finally need that specialty jack. This AC Hydraulic Single-Stage Air Hydraulic Jack for high clearance applications is a top of the line, straight lift design floor jack that is both extremely durable and extremely reliable. Plus, unlike traditional jacks, there is no lifting arm that may come in contact with any part of the the vehicles body or other components that would result in damage. With a lift height of up to 24.06 inches, or up to 33.9 inches with an F250 extension, this air hydraulic jack is perfect for high lift, tight clearance needs.

Features:

  • Minimum height of 14.21 in
  • Maximum height of 24.06 in, the F250 (optional) extension offers a total extended height of 33.90 in
  • Hard chromium plated piston rod for long life
  • Built-in safety overload valve
  • Hand-operated dead-man’s control for optimum safety whilst lifting and lowering
  • Ergonomic handle with push buttons
  • With 2 extensions (1.97/3.94 in)

Specifications:

  • Capacity:  55000 lb 
  • Min. height:  14.21 in 
  • Max. height:  24.06 in 
  • Frame length:  32.17 in 
  • Handle length:  45.67 in 
  • Width:  9.06 in 
  • Width (with wheels):  12.28 in 
  • Air supply:  9 - 12 bar 
  • Air consumption:  350 l/min
  • Weight:  157lbs
Show More Show Less
Valvetronic Designs Electronic Exhaust Valve Control Kit - 1 Valve Ac...
Please visually confirm the exhaust valve actuator installed on your vehicle prior to p...
Valvetronic Designs - Corporate Logo
T#:53114628
Part#: VTD.EVH
Ships in 2 Business Days
New Item
$ 299.99 USD
Free Shipping
$ 299.99 USD
Free Shipping
This system allows you to control your BMW's OEM or aftermarket exhaust valves with the touch of a button. This kit enables the control of a single electronic exhaust valve.