BMW Suspension Parts for BMW Z Series G29 (2019+)

Turner Monoball Front Thrust Arm Bushings Upgrade - A90 / G20 / G29 ...

T#:599479

Part#: 005654LA01

In Stock

Sale - Save 20% $ 454.99

This product was last offered at the strikethrough price on
06-14-2026

$ 363.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 454.99

This product was last offered at the strikethrough price on
06-14-2026

$ 363.99 USD

Add to Wish List

BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

Show More Show Less

Performance Rear Swaybar Endlinks - Pair - F22/23 F3X G29 G20 ...

T#:5471059

Part#: 00501TMS018

In Stock

$ 286.99 USD

Add to Wish List

Qty

$ 286.99 USD

Add to Wish List

Turner's new Performance Rear End Links feature massive Teflon-lined FK 1/2" Bearings to provide the highest load capacity for use with stiffer aftermarket sway bars. Custom heat-treated Chromoly High Misalignment studs connect to the sway bar and offer extreme articulation capability (65 degrees) to prevent the end link from binding when used with different adjustment holes on aftermarket sway bars. The end links are length adjustable to eliminate preload on the sway bars, which can result from uneven settling of springs or uneven suspension heights from corner weighting. Blue Anodized 6061-T6 aluminum turnbuckles work in conjunction with the left and right-hand threaded rod ends for simple and precise adjustment. These end links are perfect for street or race applications. Sold as a pair Made in the USA Replaces BMW # 33506785607 & 33506785608

Show More Show Less

Rear Sway Bar End Links - G20 / G29 / A90 / A91

T#:22525948

Part#: WAS-427

In Stock

$ 245.00

This product was last offered at the strikethrough price on
05-03-2026

$ 230.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 245.00

This product was last offered at the strikethrough price on
05-03-2026

$ 230.99 USD

Limited Qty Sale

Add to Wish List

Verkline is dedicated to delivering top-tier quality to enhance your driving experience. Their rear sway bar end links are the result of meticulous engineering, starting with a comprehensive 3D laser scan of your vehicle and CAD development of the wishbone. What sets their product apart is the extensive testing it undergoes, including Finite Element Analysis (FEA) and real-world road trials, ensuring you get a premium, high-performance solution. Key Advantages: User-Friendly Adjustability: Achieve precise corner weights without sway bar preload, maintaining consistent suspension heights for improved handling. Enhanced Strength and Rigidity: Enjoy a substantial increase in strength, which translates to superior handling performance. Replaceable High-Quality Uniballs: Say goodbye to the inconvenience of replacing the entire link due to ball joint wear. Our easily obtainable, high-quality uniballs make maintenance hassle-free. Outstanding Features: Bolt-In Installation: No need for vehicle modifications; our kit is designed for straightforward installation. Pre-Assembled Links: Ready to install out of the box, saving you time and effort. Robust High-Strength Pins: Precision-machined from high-strength steel for long-lasting durability. CNC Machined Turnbuckles: Crafted from 6082 T6 aluminum, ensuring top-notch quality and resilience. High-Quality Spherical Bearings and Uniballs: Offering exceptional articulation to prevent bending in any suspension setup. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of your end links. Comprehensive Mounting Kit: Everything you need for a seamless installation is included. OEM Sway Bar and Upright Compatibility: Seamlessly integrates with your existing setup. What's Included: A pair of CNC billet 6082 aluminum front sway bar links turnbuckles (two pieces) Four CNC machined Cr-Mo uniball pins Thin locking nuts High-quality motorsport uniballs Rubber uniball boots for dust protection Printed installation instructions Compatible with: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces OEM Part Numbers: 33506785607 / 33506785608 48830-WAA01

Show More Show Less

Rear Upper Adjustable Lateral Straight Links

T#:22525950

Part#: WAS-422

In Stock

Sale - Save 21% $ 579.00

This product was last offered at the strikethrough price on
05-03-2026

$ 457.11 USD

Add to Wish List

Qty

Sale - Save 21%

$ 579.00

This product was last offered at the strikethrough price on
05-03-2026

$ 457.11 USD

Add to Wish List

Verkline is excited to introduce their Rear Upper Adjustable Lateral Straight Links, the culmination of an extensive development and testing process. These cutting-edge components have undergone a meticulous journey, including 3D laser scanning, CAD wishbone development, FEA (Finite Element Analysis) testing, and rigorous road trials. Now, enthusiasts have the opportunity to elevate their driving experience with these high-performance parts. Notable Advantages: Bump Steer and Anti-Squat Adjustability: Users can fine-tune their vehicle's bump steer and anti-squat characteristics for enhanced handling precision. Extended Camber Adjustment Range: These links provide a broader camber adjustment range, offering greater flexibility for alignment customization. Enhanced Strength and Rigidity: Verkline's design boasts increased strength and rigidity, resulting in an overall improvement in handling performance. Consistent Geometry: With no rubber components to flex, these links maintain consistent geometry during alignment adjustments, ensuring accuracy. Efficient Weight Design: Despite the additional functionality, these links maintain a weight profile similar to OEM components. Key Features: Bolt-In Kit: Installation is seamless, requiring no modifications for a hassle-free setup. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, simplifying installation. High-Quality T45 Tubing: Verkline employs T45 tubing, directly sourced from the steel mill, to ensure durability and lightweight performance. Premium Motorsport Uniballs: These components feature high-quality motorsport uniballs for reliable and high-performance articulation. Uniball Rubber Boots: Protect against dust and water, extending the lifespan of the components. Comprehensive Mounting Kit: Everything needed for installation is included, making setup efficient and straightforward. OEM Knuckle and Subframe Compatibility: The design effortlessly integrates with existing setups. Included Components: Four T45 lightweight steel arms (two pairs) Thin locking nuts High-quality motorsport uniballs Spacer sleeves for assembling the arm with the subframe and upright Rubber uniball boots for dust protection Printed installation instructions Compatible with the following vehicles: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces the following part numbers: 33326878631 / 33326878632

Show More Show Less

Rear Spring Wishbone Bushings With Lockout Kit - G20 / G29 / A90 / A9...

T#:22492999

Part#: WAS-425

Special Order: No Guaranteed ETA

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Unlock the full potential of your BMW G20, G29, and Supra A90/A91 with Verkline's rear spring wishbone bushings. This product is the culmination of extensive development and testing, featuring 3D laser scanning, CAD design, FEA analysis, and rigorous road trials. Experience a range of benefits, including: Enhanced strength and rigidity for superior handling performance Eliminate rubber deformations, preserving precise alignment during maintenance Key Features: A user-friendly bolt-in kit that requires no vehicle modifications Pre-assembled inserts for straightforward installation Included tool to prevent wishbone bending during insert replacement Precision CNC machining from durable 6082 T6 aluminum Equipped with high-quality motorsport spherical bearings Comprehensive kit with all necessary components for seamless mounting Compatible with OEM wishbone and subframe components Please note that if you use lockout plates to block wishbone movement on the subframe, it's essential to correct the camber setting within the adjustable upper bent link. What's Included: Two pairs of Verkline's CNC-machined 6082 aluminum spherical bearing housings High-quality motorsport spherical bearings Lightweight aluminum spacer sleeves for arm assembly with the subframe A tool to prevent wishbone bending during insert replacement Printed installation instructions Fits these BMW models: BMW G20 330i, M340i BMW G29 Z4 M40i, 30i Toyota Supra A90 / A91

Show More Show Less

Rear Upper Adjustable Lateral Bent Links - G20 / G29 / A90 / A91 ...

T#:22525951

Part#: WAS-423

Ships on Aug 5, 2026

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

Verkline proudly introduces their Rear Upper Adjustable Lateral Bent Links, the result of a comprehensive development and testing program. These cutting-edge components have undergone a meticulous journey, including 3D laser scanning, CAD wishbone development, Finite Element Analysis (FEA) testing, and rigorous road trials. Now, automotive enthusiasts can elevate their driving experience with these high-performance parts. Key Advantages: User-Friendly Camber Adjustability: Enthusiasts can effortlessly fine-tune their vehicle's camber settings, enabling precise alignment adjustments for improved handling. Enhanced Strength and Rigidity: Verkline's design ensures increased strength and rigidity, resulting in superior handling performance. Consistent Geometry: With no rubber components to flex, these links maintain unaltered geometry during alignment adjustments, ensuring precision. Efficient Weight Design: Despite the added functionality, these links maintain a weight profile similar to OEM components. Notable Features: Bolt-In Kit: Installation is straightforward, requiring no modifications, ensuring a hassle-free setup. Pre-Assembled Wishbone: The wishbone comes pre-assembled with a predefined length, simplifying the installation process. CNC Machined Arm: Expertly crafted from 6082 T6 aluminum, these arms offer superior strength and durability. High-Quality Motorsport Uniballs and Spherical Bearings: These components feature top-tier uniballs and spherical bearings, ensuring reliable and high-performance articulation. Uniball Rubber Boots: Provide protection against dust and water, extending the lifespan of the components. Comprehensive Mounting Kit: Everything required for installation is included, streamlining the setup. OEM Knuckle and Subframe Compatibility: The design seamlessly integrates with existing setups. Included Components: Two pairs of CNC billet 6082 aluminum wishbones (camber arms) Two pairs of CNC machined high-strength steel adjustment turnbuckles Thin locking nuts High-quality motorsport uniballs and spherical bearings Lightweight aluminum spacer sleeves for easy assembly of the arm with the subframe and upright Rubber uniball boots for dust protection Printed installation instructions Compatible with: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91 Replaces OEM Part Numbers: 33326881199

Show More Show Less

Rear Adjustable Toe Links With Lockout Kit - G20 / G29 / A90 / A91 ...

T#:22492998

Part#: WAS-424

Ships in 3 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

Verkline proudly offers a top-notch solution for BMW G20, G29, and Supra A90/A91 enthusiasts – our high-performance rear spring wishbone bushings. These precision-engineered components have undergone meticulous development, including 3D laser scanning, CAD design, FEA testing, and demanding road trials, ensuring uncompromising quality. With this kit, you can effortlessly upgrade the second bearing (number 13 on the picture) from rubber to uniball, perfectly complementing the factory uniball (mount number 18 on the picture). Enjoy a wide array of benefits, including: Augmented strength and rigidity for unmatched handling performance Maintain precise geometry during alignments by eliminating rubber deformation Key Features: A user-friendly bolt-in kit, requiring no vehicle modifications Pre-assembled inserts for a hassle-free installation Includes a specialized tool for easy insert replacement Precision CNC machining from durable 6082 T6 aluminum Equipped with top-quality motorsport spherical bearings A comprehensive kit with all necessary components for straightforward mounting Compatible with OEM wishbone and upright components What's Included: Two pairs of Verkline's CNC-machined 6082 aluminum spherical bearing housings High-quality motorsport spherical bearings Lightweight aluminum spacer sleeves for upright and arm assembly A tool for easy insert replacement Printed installation instructions Fits these BMW models: BMW G20 BMW G29 Toyota Supra A90 / A91

Show More Show Less

Turner Rear Control Arm Monoball Upgrade - Pre-Installed Arms - BMW G...

T#:599476

Part#: 005654LA09

Ships in 9 Business Days

$ 738.99 USD

Add to Wish List

Qty

$ 738.99 USD

Add to Wish List

BMW's are notorious for their failure-prone control arm bushings. The pliable rubber bushings, present even in M performance models, allow substantial movement of the front wheels to enhance everyday driving comfort. However, they also permit significant alignment changes, leading to a disconnected and numb road feel that detracts from a confidence-inspiring driving encounter. Over time, the fluid-filled rubber bushings succumb to fatigue and cracking due to continual deflection and ozone degradation, ultimately resulting in the leakage of damping fluid and complete failure.

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set, and are available (T599476) if you would prefer that option.

Watch to learn more about Turner Monoball Bushings

Design:

OEM sealed, greased ball joint for exceptional durability and service life, even in the most severe operating conditions
6061-T6 anodized housing for excellent corrosion resistance
Turner designed knurled OD to provide the perfect fit for the wide range of thrust arm bore
CNC machined 304ss bearing inserts, providing a precision fit between the ball joint and the subframe
Performance Advantages:

Immediate, precise steering and breaking feedback
Long-lasting performance with minimal maintenance requirements
Enhanced road feedback minus any unnecessary noise, vibration, harshness

Show More Show Less

Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Square Seat...

T#:340477

Part#: TSU998062A

Ships on Nov 27, 2026

Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

Sale - Save 25%

$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Show More Show Less

Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Tapered Sea...

T#:340476

Part#: TSU9980548

Ships on Nov 27, 2026

Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

Sale - Save 25%

$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Show More Show Less

Meyle Shock Absorber Bump Stop

T#:40275156

Part#: 3147400021

Back Ordered

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Engineered to guard your rear shock absorbers against dirt, debris, and moisture, helping to extend their service life and preserve peak suspension performance.

Ultimate Full Suspension Set Bundle - A90 / A91 / G29 Z4

T#:22525972

Part#: WAS-400

Back Ordered

$ 7,922.99 USD

Add to Wish List

Qty

$ 7,922.99 USD

Add to Wish List

Verkline's journey to develop an exceptional suspension set for the Supra A9X and BMW Z4 G29 began from day one, and it was significantly influenced by Robert from Apex Nürburgring YouTube video. With a profound understanding of high-speed driving dynamics, Verkline collaborated with Apex to craft a suspension set that pushes the boundaries of performance. Key Components in the Full Set: Rear Lightweight Tubular Subframe (WAS-401) Front Caster Adjustable Control Arms (WAS-410) Front Lower Adjustable Control Arms (WAS-411) Front Bump Steer Adjustable Tie Rod Ends (WAS-412) Front Sway Bar End Links (WAS-413) Rear Adjustable Traction Links (WAS-421) Rear Upper Adjustable Lateral Straight Links (WAS-422) Rear Upper Adjustable Lateral Bent Links (WAS-423) Rear Adjustable Toe Links with a lockout kit (WAS-424) Rear Spring Wishbone Bushings with lockout kit (WAS-425) Rear Knuckle Bushings (WAS-426) Rear Sway Bar End Links (WAS-427) Comprehensive installation and suspension setup instructions (66 printed pages) Toyota Supra A9X and BMW Z4 G29 were designed for an exhilarating driving experience on the streets, but their factory settings may not suffice for those seeking high-performance capabilities. The issue lies in rear-end bump steer, which affects the toe angle during suspension travel. The Consequences of Bump Steer: Rear toe changes unpredictably, impacting stability and handling. During hard acceleration, the rear end tilts, resulting in toe-in. Under hard braking, the rear suspension rises, leading to toe-out. Verkline's Solution: To address these issues and enhance performance, Verkline offers three suspension setup presets (Track, Street, Drag) tailored to various driving styles. These presets provide precise alignment, ride height suggestions, and arm lengths, ensuring optimal kinematics for every designated use of the car. Say goodbye to unpredictable handling issues and experience stable and controlled driving with Verkline's Suspension Set for Toyota Supra A9X and BMW Z4 G29. Transform your car's performance with the expertise of Verkline and Apex Nürburgring. Fits these models: Toyota Supra A90 Toyota Supra A91 BMW Z4 G29

Show More Show Less

Rear Adjustable Traction Links - G20 / G29 / A90 / A91

T#:22525949

Part#: WAS-421

Back Ordered

$ 579.00 USD

Add to Wish List

Qty

$ 579.00 USD

Add to Wish List

Following an extensive development and testing process, Verkline is pleased to offer their rear adjustable toe links to all automotive enthusiasts. The brand's unwavering commitment to quality and performance is evident in every aspect of these meticulously engineered components. Key Benefits: User-Friendly Toe Adjustability: Enthusiasts can effortlessly achieve precise toe settings, ensuring optimal alignment for enhanced handling. Lockout Plates: Included to prevent wishbone movement on the subframe, preserving desired alignment settings. Enhanced Strength and Rigidity: Verkline's design provides a significant boost in strength and rigidity, resulting in improved handling performance. Consistent Geometry: Verkline guarantees that alignment settings remain unaffected during adjustments, eliminating the effects of rubber-induced deviations. Outstanding Features: Bolt-In Kit: No modifications are required, simplifying the installation process for users' convenience. Pre-Assembled Wishbone: The wishbone arrives pre-assembled with a predefined length, saving both time and effort. High-Quality T45 Tubing: Verkline employs T45 tubing, directly sourced from the steel mill, to ensure both durability and lightweight performance. Premium Motorsport Uniballs: Verkline's components feature reliable and high-performance articulation. Uniball Rubber Boots: These boots offer protection against dust and water, extending the lifespan of the components. Complete Mounting Kit: Verkline includes all the necessary components for installation, streamlining the setup process. OEM Knuckle and Subframe Compatibility: The design effortlessly integrates with existing setups. What's Included: Two pairs of T45 lightweight steel arms (four arms in total) Two pairs of clevises (four clevises in total) Thin locking nuts High-quality motorsport uniballs Lightweight aluminum spacer sleeves for easy arm assembly in the rear subframe Rubber uniball boots for dust protection Printed installation instructions Enthusiasts can experience the precision and performance of Verkline's Rear Adjustable Toe Links, allowing them to elevate their vehicle's handling and alignment for a smoother and more controlled driving experience. Compatible with the following vehicles: BMW 3 Series G20 BMW 3 Series G21 BMW Z4 G29 Toyota Supra A90 Toyota Supra A91

Show More Show Less

Rod End Boot (14-18mm) - Priced Each

T#:599632

Part#: RERS3

In Stock

Sale - Save 43% $ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Qty

Sale - Save 43%

$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.

Show More Show Less

Febi-Bilstein Front Bump Stop / Additional Shock Absorber - 313368577...

We Price Match - Give Us A Call or Chat!

T#:27871811

Part#: 31336857729

In Stock

$ 19.99

This product was last offered at the strikethrough price on
05-07-2026

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Positioned between the strut mount and spring pad, the bump stop provides crucial support for your vehicle's shock absorber. Its primary role is to prevent the strut from over-compressing when encountering significant bumps or rough terrain, which could otherwise lead to damage to the strut and other suspension components.

Constructed from a soft rubber material, bump stops are designed for maximum impact absorption. However, they are susceptible to dry-rotting and general wear over time. ECS recommends replacing bump stops whenever the spring strut is disassembled for maintenance or replacement.

Show More Show Less

Additional Shock Absorber - Front

We Price Match - Give Us A Call or Chat!

T#:35964553

Part#: 31336854700

In Stock at Vendor

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

The bump stop limits strut travel to prevent suspension bottoming. Fits either left or right; one per strut. Replace when installing new strut inserts. Genuine BMW Additional Shock Absorber, Front - This item fits the following BMW Chassis: F31,F33,F36

Show More Show Less

Rear Lightweight Tubular Subframe

T#:22525970

Part#: WAS-401

Ships on Aug 5, 2026

$ 3,069.00 USD

Add to Wish List

Qty

$ 3,069.00 USD

Add to Wish List

Following extensive development and testing, Verkline is thrilled to introduce this cutting-edge rear subframe to the global automotive community. Crafted with precision and performance in mind, this subframe is the result of a comprehensive process that includes 3D laser scanning, CAD development, Finite Element Analysis (FEA) testing, and rigorous road trials. Key Benefits: Significant Weight Reduction: This lightweight subframe is 6.5 kg lighter than the OEM rear subframe, resulting in a remarkable 33% reduction in weight on the rear axle, delivering enhanced vehicle performance. Optimized Rear Final Drive Position: The rear final drive has been strategically repositioned 10 mm upward to alleviate stress on the C.V. joints. This adjustment safeguards against premature joint wear, especially when lowering the vehicle. Robust Mounting: The subframe has eliminated rubber mounts in favor of a single, bolted mounting position. This design choice prevents rear subframe shifts during high-load situations. Bump Steer Adjustment: The subframe is equipped with additional bump steer adjustment capabilities, enabling users to fine-tune the bump steer by adjusting the rear toe link pickup point up and down. Polyurethane Mounts: Factory rubber mounts have been replaced with race car-grade black polyurethane mounts, substantially reducing movement during torque transfer and improving drivetrain performance. Key Features: Ample Underbody Access: The subframe provides more space for underbody access, facilitating easier maintenance and upgrades. Enhanced Chassis Rigidity: Constructed with a tubular frame design using T45 tubing and S355 metal sheets, this subframe bolsters chassis rigidity for superior handling. OEM Compatibility: Verkline has retained the OEM mounting points for wishbones, sway bars, brake lines, exhaust systems, and headlight range sensors, ensuring a seamless plug-and-play installation. Quality Assurance: Designed, fabricated, validated, and tested in Poland, each piece undergoes rigorous inspection by trained staff. Weldings are rigorously checked for cracks, and the entire product is meticulously examined before shipping. Aesthetically Pleasing: In addition to exceptional performance, the subframe boasts a visually appealing design that complements the vehicle's overall aesthetics. Included Components: Pre-assembled rear subframe powder coated in black (other color options available for an additional cost). Set of steel lockout wishbone positioning shims (24 pcs.) for precise Toe Link positioning and bump steer adjustment. Bolt and nut kit for easy installation of Toe Links (Zinc plated, grade 10.9). Set of steel lockout wishbone positioning shims (8 pcs.) for precise Camber wishbones positioning. Race polyurethane mounts for the rear differential. Mounting bolt for the exhaust system (Zinc plated, grade 10.9). Comprehensive printed installation instructions for a trouble-free setup. Elevate your vehicle's performance with Verkline's New Lightweight Tubular Adjustable Rear Subframe, which offers substantial weight reduction, improved handling, and enhanced rigidity. This innovative subframe ensures a precise, responsive, and high-performance driving experience. OEM Replacements for: – 33316794865 – 33316795830 – 51206WAA04 – 51206WAA05 Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91 BMW Z4 G29 Key Benefits: Significant Weight Reduction: This lightweight subframe is 6.5 kg lighter than the OEM rear subframe, resulting in a remarkable 33% reduction in weight on the rear axle, delivering enhanced vehicle performance. Optimized Rear Final Drive Position: The rear final drive has been strategically repositioned 10 mm upward to alleviate stress on the C.V. joints. This adjustment safeguards against premature joint wear, especially when lowering the vehicle. Robust Mounting: The subframe has eliminated rubber mounts in favor of a single, bolted mounting position. This design choice prevents rear subframe shifts during high-load situations. Bump Steer Adjustment: The subframe is equipped with additional bump steer adjustment capabilities, enabling users to fine-tune the bump steer by adjusting the rear toe link pickup point up and down. Polyurethane Mounts: Factory rubber mounts have been replaced with race car-grade black polyurethane mounts, substantially reducing movement during torque transfer and improving drivetrain performance. Key Features: Ample Underbody Access: The subframe provides more space for underbody access, facilitating easier maintenance and upgrades. Enhanced Chassis Rigidity: Constructed with a tubular frame design using T45 tubing and S355 metal sheets, this subframe bolsters chassis rigidity for superior handling. OEM Compatibility: Verkline has retained the OEM mounting points for wishbones, sway bars, brake lines, exhaust systems, and headlight range sensors, ensuring a seamless plug-and-play installation. Quality Assurance: Designed, fabricated, validated, and tested in Poland, each piece undergoes rigorous inspection by trained staff. Weldings are rigorously checked for cracks, and the entire product is meticulously examined before shipping. Aesthetically Pleasing: In addition to exceptional performance, the subframe boasts a visually appealing design that complements the vehicle's overall aesthetics. Included Components: Pre-assembled rear subframe powder coated in black (other color options available for an additional cost). Set of steel lockout wishbone positioning shims (24 pcs.) for precise Toe Link positioning and bump steer adjustment. Bolt and nut kit for easy installation of Toe Links (Zinc plated, grade 10.9). Set of steel lockout wishbone positioning shims (8 pcs.) for precise Camber wishbones positioning. Race polyurethane mounts for the rear differential. Mounting bolt for the exhaust system (Zinc plated, grade 10.9). Comprehensive printed installation instructions for a trouble-free setup. Elevate your vehicle's performance with Verkline's New Lightweight Tubular Adjustable Rear Subframe, which offers substantial weight reduction, improved handling, and enhanced rigidity. This innovative subframe ensures a precise, responsive, and high-performance driving experience. Compatible with the following vehicles: Toyota Supra A90 Toyota Supra A91 BMW Z4 G29

Show More Show Less

OEM Febi Intake Air Filter - BMW F2x/F3x

T#:47164995

Part#: 33536858240

Special Order: No Guaranteed ETA

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Give your suspension the safety net it deserves. This rubber bump stop is the last line of defense against harsh bottom-outs, keeping your shock absorbers from taking hits that could send them straight to the replacement pile. Thanks to its soft rubber construction, the factory piece is often torn, cracked, or completely missing by now. Refresh your chassis confidence with this high-quality OE Febi bump stop — engineered to restore proper suspension travel and keep everything operating the way BMW intended. Sold individually. One bump stop is needed per shock absorber, but replacing them in pairs is always the smart move for a balanced, dialed-in ride.

Show More Show Less

Ball Bearing - Front

T#:56218625

Part#: 31306890656

Special Order: No Guaranteed ETA

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

This Febi Bilstein Front Ball Bearing provides the smooth rotational support your front struts require to transfer steering inputs cleanly to the chassis.

G42 BMW Front Control Arm

We Price Match - Give Us A Call or Chat!

T#:33379608

Part#: 33326878632

Special Order: No Guaranteed ETA

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

Meyle Control Arm for BMW G42

BMW G42 Front Control Arm

We Price Match - Give Us A Call or Chat!

T#:33379611

Part#: 33 32 6 878 631

Special Order: No Guaranteed ETA

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

The control arm connects the front wheels to the vehicle's frame, allowing for smooth movement and absorbing road impacts. It is engineered to provide a balance between comfort and performance, making it ideal for daily driving and spirited driving conditions alike.

Show More Show Less

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

Be sure to add some grease to the rods in this tool set during installation to prevent breakage.

T#:580442

Part#: B8800137

In Stock

Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.

Show More Show Less

Bav Auto Scissor Type Ball Joint / Tie Rod Separator

T#:580366

Part#: B8800042

In Stock

Sale - Save 15% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Use this tool to separate control arm ball-joints and larger tie-rod end joints. This tool is particularly beneficial when dealing with tight locations that prevent the use of non-scissor separator tools. Note that max jaw opening is 1 3/4".

Show More Show Less