BMW Engine Parts for BMW Z Series G29 (2019+)

GENIUS 2 Bank 6 Volt / 12 Volt 4A Battery Charger - NOCO

T#:1135809

Part#: GENIUS2X2

Ships in 9 Business Days

20% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

Qty

20% off MSRP

$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

The GENIUS2X2 represents a leap forward in power, performance, energy efficiency, and compactness. This advanced charger is a dual-bank system designed for both 6-volt and 12-volt batteries, serving as a charger, maintainer, trickle charger, and battery desulfator all in one. With a rating of 4 amps (2 amps per bank), it caters to all types of lead-acid and lithium-ion batteries, including flooded, gel, AGM, marine, and deep-cycle variants.

Features:

A two-bank battery charger maintainer rated a 4-amps - 2-amps per bank with a 40Ah capacity range - designed to charge and maintain multiple vehicles like cars, motorcycles, boats, ATVs, RVs, lawnmowers, lawn tractors, trucks, and more.
Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts.
Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.
It's not just a trickle charger; it's an advanced battery maintainer. A fully automatic, worry-free battery charger for everyday use - 24/7 - with zero overcharge.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

GENIUS PRO 6 Volt / 12 Volt / 24 Volt 25A Battery Charger - NOCO ...

T#:641141

Part#: GENIUSPRO25

Ships in 9 Business Days

20% off MSRP $ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.99 USD

Add to Wish List

Qty

20% off MSRP

$ 749.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.99 USD

Add to Wish List

The GENIUSPRO25 is a fully-automatic professional smart charger, maintainer, power supply, and battery desulfator designed for 6-volt, 12-volt, and 24-volt systems. With temperature compensation and a 25-amp rating, it's suitable for all types of automotive, marine, and deep-cycle batteries.

Features:

The all-new GENIUSPRO25 - Similar to our G15000, just more powerful. With the greatest performance and functionality yet, it's a world-class battery charger to let professionals push the limits at incredible charging speeds.
Do more with Genius - A multi-voltage charger - 6-volt (25-amps), 12-volt (25-amps), and 24-volt (12.5-amps) - for lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion.
Engineered for pros - Designed for pros who need absolute performance and uncompromising functionality. Featuring ultra-flexible silicone cabling - down to -40ºC - with protective nylon breaded shielding for maximum protection against abrasion.
Progressive power supply - A dual-voltage power supply - 12-volt (25-amp) and 24-volt (12.5-amp) - to maintain constant power delivery without unwanted ripple, noise, and transient spikes during ECU flashing, reprogramming, and diagnostic testing.
Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates to maximize battery life and enable fast charging.
Charge dead batteries - Detects batteries as low as 1-volt. Or use the all-new force mode that allows you to manually begin charging dead batteries down to zero volts.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

Carrillo B48 Forged Connecting Rod Set - Includes WMC Rod Bolts - BMW...

T#:7624642

Part#: CAR-CRS-B48-WMC

In Stock

$ 1,399.99 USD

Add to Wish List

Qty

$ 1,399.99 USD

Add to Wish List

Carrillo connecting rods are well known within pro racing and street performance circles for good reason; they produce a premium product that winning racers around the world depend on. Quality and pride go hand-in-hand at Carrillo Industries. Manufacturing a Carrillo rod is much more than cutting a forging, meeting production goals, and shipping deadlines. Every Carrillo rod is made with the goal of winning in mind and the Carrillo rods are a proven performer in both street and racing B48 engines. Carillo's fasteners and "Carrilloy" rods have proven popular with all racers who want the best. Special Chrome-Moly based alloy Forged Rods Lightweight Design for low mass Vs. Stock Strong and proven in racing Excellent quality control Tight tolerances and balancing Includes High-Quality Non-stretch WMC Rod Bolts

Show More Show Less

New TTE580 B58 Turbocharger Upgrade

For vehicles with 6-Port Heads only - Will not fit 2-Port Heads

T#:12577546

Part#: TTE10321

Ships on Oct 19, 2026

$ 4,964.99 USD

Add to Wish List

Qty

$ 4,964.99 USD

Add to Wish List

TTE580 is the very latest hybrid performance upgrade turbocharger based on the Original turbocharger for the BMW B58 inline-six-cylinder turbocharged engine. Superfast spool and response with extra power. We feel this is the best performing 550+hp hybrid. Engineered & Enhanced To construct a TTE580 The Turbo Engineers change the original compressor and employ a far larger and more efficient billet wheel with extended tip technology and mill the compressor cover to the optimum gap to match the new compressor profile. The Turbo Engineers change the Original exhaust turbine for a larger 9-blade high-flow item to lower EGT and raise the power potential but maintain a great boost response profile. Equilibrium Precisely balancing the turbochargers is a key critical factor to becoming a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequently, great care is taken with all TTE turbochargers to achieving balance standards. Firstly, parts are balanced at slow speeds up to 2800RPM in multiple planes using a single parts machine, then components are assembled and the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using an in-house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial-numbered balance test result document. Product Highlights: Original Genuine turbocharger as the base part Original Genuine actuator Original Genuine diverter valve TTE Billet Milled compressor 7+7 Blade with Extended Tip, 55.5mm Inlet TTE High-Flow 9 blade turbine Plug & Play installation 500+ HP on 98ron and proven at 580hp on 102ron Proven TheTurboEngineers quality Single parts finely balanced then components assembled and core high-speed VSR balanced Supplied with a balance test result document Software recalibration is required Made in Germany

Show More Show Less

BMW Crankshaft Front Oil Seal Installer - B37, B47, B48, B57, B58, N4...

T#:640831

Part#: CTA3881

Ships on Oct 19, 2026

$ 141.41 USD

Add to Wish List

Qty

$ 141.41 USD

Add to Wish List

Replaces front crankshaft seal on BMW B37, B47, B48, B57, B58, N47 & N57 engines Features: Compare to BMW Factory Tool 118 800 Components: 3881X01 – Press Sleeve, 3881X02 – Guide Tool, 3881X03 – Nut & 3881X04 – Screws Visit ctatools.com for product instructions

Show More Show Less

Supertech High Performance Valve And Spring Kit - B58

T#:641511

Part#: SUP-HPVK-B58

Ships on Oct 19, 2026

$ 2,339.99 USD

Add to Wish List

Qty

$ 2,339.99 USD

Add to Wish List

Upgrade your valvetrain with Supertech components Kit Contains: 12 Nitride Intake Valves 24 Intake Valve Keepers 12 Inconel Exhaust Valves 24 Exhaust Valve Keepers 24 High Performance Valve Springs 24 Titanium Retainers

Show More Show Less

24-270X Accusump Pro Electric Valve Kit

T#:590562

Part#: 24-270X

Ships on Oct 22, 2026

17% off MSRP $ 297.60

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.00 USD

Add to Wish List

Qty

17% off MSRP

$ 297.60

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.00 USD

Add to Wish List

Dinan B58 Carbon Fiber Engine Cover - Matte Finish - BMW G20 G22/23/2...

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:14452855

Part#: D590-0004

Ships on Oct 27, 2026

Sale - Save 10% $ 584.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 526.46 USD

Add to Wish List

Qty

Sale - Save 10%

$ 584.99

This product was last offered at the strikethrough price on
09-29-2026

$ 526.46 USD

Add to Wish List

Borrowing on classic engine/valve cover elements from yesteryear, the Dinan G2x/G4x B58 engine cover takes those queues and incorporates additional elements to form a transformative engine bay dress-up piece like no other. Like the ever-popular and lusted-after E36/E46 Dinan carbon fiber valve covers of the past, the G chassis B58 engine cover mimics the BMW power stripes but with a Dinan twist. Beyond the legacy homage, the 2x2 matte twill carbon fiber base gives way to opposing gloss carbon fiber and white painted accents among the cylinder count callouts. This small touch adds visual intrigue to an otherwise largely feature-deficient landscape. The conflicting finishes also carry the added benefit of tying together elements within the space that may be of the secondary finish for nearly limitless visual versatility in a single piece. Features: 2x2 matte twill carbon fiber with opposing gloss carbon fiber and painted white accents Power stripes featuring Dinan – an homage to OEM and legacy Dinan engine/valve covers Direct replacement of factory engine cover Lighter - OEM cover: 4.1 pounds vs. Dinan Cover: 2.9 pounds Grommets included for quick and easy installation

Show More Show Less

Meyle Mechanical Accessory Belt Tensioner - BMW B46/48 B58

For vehicles without the Energy Recovery System

5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:5108968

Part#: 11288580360

Ships on Oct 19, 2026

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

Accessory belt tensioners provide tension to the belt drive system, ensuring the belt is able to properly turn engine accessories without slipping. If your tensioner has failed, replace it with a brand-new unit to ensure proper water pump and alternator functionality.

Show More Show Less

Lower Timing Chain Tensioner

T#:5175686

Part#: 13527797905

Back Ordered

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

The guide rails in your timing set keep everything tracking properly. Because it is made out of a plastic-like material, years of abrasion can wear parts of it away. This can cause the chain can to become slightly loose and cause a chain 'slap' or rattle noise. Replace your damaged timing chain tensioner and guide rails to keep timing chain noise to a minimum. Located on the outside of the timing chain guide that keeps tension on the chain.

Show More Show Less

Transmission Oil Cooler

T#:18866028

Part#: CTS-HX-0020

Special Order: No Guaranteed ETA

Sale - Save 15% $ 299.99

This product was last offered at the strikethrough price on
09-29-2026

$ 254.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 299.99

This product was last offered at the strikethrough price on
09-29-2026

$ 254.99 USD

Add to Wish List

CTS has launched the new Oil Transmission Cooler for A90/91 Toyota Supra & BMW G2X-Series. This a dual-core design that is almost 2.5x larger compared to the OEM unit. The OEM unit will overheat on prolonged use and gear shifts will become sluggish. With our transmission oil cooler upgrade you can be sure under extreme conditions you will maintain maximum shifting performance. This is the perfect upgrade for road racing and drag racing vehicles.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW Z Series G29 (2019+)

Sub-Categories

GENIUS 2 Bank 6 Volt / 12 Volt 4A Battery Charger - NOCO

GENIUS PRO 6 Volt / 12 Volt / 24 Volt 25A Battery Charger - NOCO ...

Carrillo B48 Forged Connecting Rod Set - Includes WMC Rod Bolts - BMW...

New TTE580 B58 Turbocharger Upgrade

BMW Crankshaft Front Oil Seal Installer - B37, B47, B48, B57, B58, N4...

Supertech High Performance Valve And Spring Kit - B58

24-270X Accusump Pro Electric Valve Kit

Dinan B58 Carbon Fiber Engine Cover - Matte Finish - BMW G20 G22/23/2...

Meyle Mechanical Accessory Belt Tensioner - BMW B46/48 B58

Lower Timing Chain Tensioner

Transmission Oil Cooler

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results