BMW Engine Parts for BMW Z Series G29 (2019+)

Over time and extensive use, engine timing chains may stretch, raising the risk of significant engine damage. Our kit is designed to proactively address this issue, ensuring your vehicle's continued smooth operation. It features exclusively Genuine BMW parts, guaranteeing top-notch quality and reliability.

Included in the Kit:

Upper Timing Chain Guide Chain Tensioner Upper Timing Chain Oil Pump Timing Chain Lower Timing Chain Tensioner Chain Tensioner Guide Rail Guide Rail Upper Timing Chain Tensioner Guide Top Slide Rail Double Gear Sprocket

Experience superior performance and longevity with this Genuine BMW Engine Mount, designed to provide optimal support and stability for your engine. Engineered to meet the highest standards of quality, this engine mount ensures a smooth and comfortable ride, minimizing vibrations and noise.

Key Features:

Effectively absorbs and dampens engine vibrations, reducing noise and ensuring a smoother, more comfortable ride. Manufactured to the same standards as the original equipment, guaranteeing reliability and compatibility. Designed for straightforward replacement, making it easier for you to restore your vehicle’s performance without hassle. Helps maintain proper engine alignment, contributing to optimal engine efficiency and longevity. Engineered to match the exact specifications of your BMW, ensuring a perfect fit and seamless integration with your vehicle. Made from high-quality materials that withstand extreme conditions and resist wear and tear, providing long-lasting performance. Upgrade to the Genuine BMW Engine Mount and experience the difference in quality and performance that only genuine parts can provide.

Oil leaks can be a headache, especially when they stem from failed gaskets and seals in your engine. One critical gasket that plays a key role in preventing oil leaks is the valve cover gasket. Designed to seal the gap between the valve cover and the cylinder head, this gasket acts as a barrier against oil seepage.

Over time, the constant exposure to heat and engine oil can cause the valve cover gasket to become brittle and crack, leading to leaks. If you notice oil in your spark plug wells or on the side of the cylinder head, it's likely a sign of a failing valve cover gasket.

Replace your worn-out valve cover gasket with a high-quality replacement from ECS Tuning. Our gaskets are designed to withstand the rigors of engine heat and oil exposure, ensuring a tight seal and keeping your BMW free from oil leaks. Get your BMW back on the road with confidence, knowing that your engine is protected against oil leaks with our premium valve cover gasket.

BMW B46 B48 Engine Main Bearing Kit - Std. Size is the ultimate choice for enhancing the performance and reliability of your BMW engine. Available from Turner Motorsport, this premium kit is crafted with precision to ensure unmatched durability and stability. Designed to meet the demands of both everyday driving and high-performance applications, this kit provides the support and performance enhancements your BMW engine needs.

• Complete Set: The kit includes all necessary main bearings for a full engine rebuild or upgrade.
• Silver Bi-Metal Construction: Made from high-quality silver bi-metal material for exceptional strength, durability, and heat resistance.
• Precision Engineering: Engineered to exacting standards for optimal fitment and compatibility with BMW engines.
• Enhanced Performance: Provides improved engine stability and smoother operation for a better driving experience.

The NOCO GBC010 12V Accessory Kit is designed to connect directly to the XGC IN and OUT ports of NOCO Boost jump starters. This kit allows you to effortlessly power your preferred 12-volt devices directly from a GB70, GB150, GB250+, GB251+, or GB500+, such as a tire inflator, vacuum, coffee maker, fan, cooler, and more. Constructed from high-conductivity 16AWG 100% copper wire, it boasts a rated capacity of 15 amperes.

Features: 

• Recharge NOCO Boost UltraSafe Lithium Jump Starters from a vehicles 12-volt power source.
• Compatible with NOCO Boost UltraSafe Lithium Jump Starter models GB70, GB150 GB250+, GB251+ and GB500+.
• Power 12-volt device like a tire inflator, vacuum and more.
• High-conductivity 16 AWG copper wire and rated capacity of 15-amperes.
• Molded strain reliefs prevent unwanted strain on the XGC wire connections.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The GENPRO10X2 is an upgraded version of our GEN2 with enhanced features. This model is 19% smaller yet delivers 33% more power, making it one of the most high-performing onboard marine battery chargers NOCO has ever produced. It's a two-bank onboard battery charger with a 20-amp rating (10 amps per bank) designed for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. You can independently charge and control each battery bank using selectable charging modes such as 12V, 12V AGM, 12V Lithium, and 12V Repair Mode, suitable for all types of lead-acid and lithium-ion batteries.

Features: 

• A two-bank on-board battery charger rated at 20-amps for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries.
• Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid batteries.
• An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
• Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts.
• Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.
• It's not just a trickle charger; it's an advanced battery maintainer. A fully automatic, worry-free battery charger for everyday use - 24/7 - with zero overcharge.
• A simplified mounting system allows for quick and easy installations in any direction - even up-side-down - with an integrated anti-vibration backing to isolate shock, vibration, and noise.
• A fully-sealed and waterproof onboard battery charger with an ingress protection rating of IP68, but has survived brutal life cycle testing, including thousands of hours underwater.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

The Engine Oil Filter Housing Cap CPL0070 is a vital component for BMW vehicles, designed to provide a secure and effective seal for the engine oil filter housing. This high-quality cap is essential for maintaining optimal engine performance by preventing oil leaks and ensuring proper oil pressure. Perfect for both professional mechanics and DIY enthusiasts, the Engine Oil Filter Housing Cap CPL0070 is an indispensable part of routine maintenance for BMW owners focused on vehicle longevity.

Crafted from durable materials, this oil filter housing cap is engineered to withstand the demanding conditions typical of BMW engines. Its precise design guarantees an excellent fit, allowing for easy installation and straightforward replacements. Available from Turner Motorsport, this product is a reliable choice for those looking to enhance their engine’s performance.

Key Benefits:

• Specifically designed for BMW vehicles to ensure compatibility and a perfect fit
• Prevents oil leaks, helping maintain optimal oil pressure for engine health
• Made from high-quality materials for enhanced durability and longevity
• Easy installation process allows for quick maintenance and replacements
• Ideal for both professional mechanics and DIY car enthusiasts
• Available from Turner Motorsport, a trusted supplier of BMW parts

The Engine Oil Filter Housing Cap CPL0070 is an essential upgrade for any BMW owner aiming to protect their engine and ensure it runs smoothly.