Billet Intake For B58 - Z4/ Supra

T#:38857221

Part#: BMS-B58BI-B

Ships on Aug 7, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Unlock up to 8whp with this plug-and-play air intake system, designed to enhance power, throttle response, and turbo spool while delivering an aggressive turbo sound under acceleration. Crafted from CNC-machined billet aluminum and anodized black for a sleek finish, this intake features a reusable S&B high-flow inverted cone filter for maximum airflow. The OEM cold air intake tube remains fully functional, ensuring optimal efficiency. Key Features & Benefits: ✅ Adds up to 8whp for increased performance ✅ Enhances throttle response & turbo spool ✅ Dramatic sound improvement – hear your turbo spool up ✅ High-quality CNC-machined billet aluminum construction ✅ Sleek black anodized finish for a clean look ✅ Reusable S&B high-flow inverted cone filter ✅ Quick & fully reversible installation in minutes 🔧 Made in the USA – Built for Performance Enthusiasts! 🔥

Show More Show Less

Eventuri Carbon Intake System - B48 G29 Z4

T#:5844257

Part#: EVE-G29Z4-B48-IN

Ships in 5 Business Days

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

The Z4 B48 Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the Z4, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. This however, results in a restriction with only one stock air feed to draw air in from. During development we noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore our sealed airbox also has a heat shield with gold reflective to minimize the radiative heat transfer from the exhaust manifold. In order to maximize volume we made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4') smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally we use a custom made high-flow dry filter which is ISO tested for filtration performance and has a larger filtration area than the stock filter. Features: Carbon Fiber Airbox with Dual Feeds Bespoke High Flow Dry Cone Filter Carbon Fiber Inlet Tube with 111mm opening ID CNC Machined Temperature Sensor Mount CNC Machined Breather adapter Heat Shield with Gold Reflective Backing Laser Cut Stainless Steel Brackets Silicon Coupler with OEM Specification Clamps

Show More Show Less

Mishimoto Performance Heat Exchanger - G20 M340i, G29 M40i, A90 Supra...

T#:29101678

Part#: MMHE-SUP-20

In Stock at Vendor

$ 776.99 USD

Add to Wish List

Qty

$ 776.99 USD

Add to Wish List

Optimize your intake air temperatures with the Mishimoto Performance Heat Exchanger, specifically designed for BMW G20, G29, and A90 Supra models. Embracing the air-to-water intercooler technology that BMW has adopted for its B58 engines, our heat exchanger addresses the inherent limitations and elevates cooling performance.

Starting with a complete redesign, we've eliminated all plastic components, opting instead for robust aluminum construction. The end tanks, core, and inlet/outlet ports are TIG-welded for enhanced durability. Our innovative use of strutted tubes within the core adds exceptional strength, preventing bowing and flexing during aggressive driving.

Beyond durability, our heat exchanger features a significant size increase, with a 31% boost in core volume and a 48% expansion in external fin surface area. The dual-pass flow configuration and louvered fin design contribute to a notable 5-7°F reduction in intake air temperatures and more stable overall intercooler coolant temperatures.

Key Features:

Perfect fit for BMW G20 M340i, G29 M40i, and A90 Supra. Enhanced core volume by 31%. Increased external fin surface area by 48%. Fully aluminum, TIG-welded construction for ultimate durability. Achieves a 5-7°F reduction in intake air temperatures compared to stock. Comes with a galvanized steel stone guard. Incorporates strutted tubes in the core for added strength. Dual-pass design maximizes cooling efficiency.

Show More Show Less

Performance Charge-Air Cooler "Super Manifold" - DLC Neo Chrome Finis...

2X Entries For Our G87 M2 Sweepstakes! This is a special order finish. Lead time is 5-6 weeks.

T#:25042501

Part#: 8200NEO

Ships in 3 Business Days

$ 6,099.00 USD

Add to Wish List

Qty

$ 6,099.00 USD

Add to Wish List

Designed in-joint by CSF, VF Engineering, and CPC (Custom Plenum Creations) for optimal performance, reliability, and cooling, this feature-rich intake manifold is the Tuner's dream manifold! The newer 2nd gen B58 engine, found in the Mk5 Supra, has already been proven to be an incredible platform for performance enthusiasts – taking the performance and motorsports industry by storm in just a couple of years since its release. In a short amount of time, performance enthusiasts have already started to more than double the stock engine output – now pushing through 700whp, 800whp, and looking into the elusive 4 digit 1,000whp mark. The OEM water-cooled charge air cooler intake manifold for the B58 engine is adequate in cars with little or no modifications, but starts to really show an apparent weakness in cars that have bolt-on modifications, turbo upgrades, increased fueling (such as port injection), and performance tuning. Also, the OEM intercooler system has been known to suffer from heat soak in demanding racing conditions such as time attack, endurance racing, drag racing, and drifting, as well as spirited driving on the street. This can cause the car to pull timing out of the engine due to high intake air temperatures (IATs), and then can cause “limp mode” once temperatures reach a certain threshold, as the vehicle’s ECU will cut power to protect the engine. CSF conducted extensive testing on the dyno with R&D partner VF Engineering to ensure performance improvements before going into production with the new manifold. CSF performed over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle.

Show More Show Less

Vargas Carbon Fiber Airbox Lid & Filter Kit - BMW G29 Z4, Toyota A90/...

T#:51778121

Part#: VTT-SUPRA-CF-LID

Ships in 10 Business Days

$ 444.99 USD

Add to Wish List

Qty

$ 444.99 USD

Add to Wish List

Elevate the performance and visual appeal of your B58-powered Supra or Z4 with the VTT Carbon Fiber Intake Lid and Filter system.

Injen SES Intercooler Charge Pipe - Polished Finish - G29 Z4, A90 MKV...

T#:26704953

Part#: SES2300ICP

In Stock at Vendor

$ 466.99 USD

Add to Wish List

Qty

$ 466.99 USD

Add to Wish List

Take your B58-equipped G29 Z4 or A90 MKV Supra to the next level with this high-performance Injen SES charge pipe. Engineered to optimize airflow and power, these pipes are essential for unlocking your vehicle's full potential. Here's why they're a must-have: Manufactured from 2.75” Lightweight T6-6061 Aluminum Piping Oversized piping reduces restriction providing increased airflow to the engine Our aluminum piping replaces the brittle, failure-prone factory unit. Precision CNC machined quick connect flanges for an OE-Style attachment Includes one 1/8” Female NPT bung Available in Polished, Wrinkle Black, and Wrinkle Red finishes Seamlessly adapts with the OE Intercooler Precision CNC machined, and TIG-Welded sensor flanges included Stainless Steel Band Clamp with Inner Protective Liner Automotive Grade Silicone Couplers Unique CNC Machined Injen Logo Plate for a Refined Style Increase Throttle Response and Decreases Turbo Lag Beaded Tube Ends to Help Prevent Couplers from Coming Off Mandrel-bent Tubing for Increased Flow Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation Made in Pomona California, USA Injen Technology Limited Lifetime Warranty Crafted by Injen Technology, these intercooler pipes undergo extensive testing and refinement, delivering noticeable bolt-on power. Elevate your vehicle's performance today and feel the difference on the road.

Show More Show Less

Vargas Modular Intake System - BMW G2X 3

T#:51883663

Part#: VTT-G2X-INT4

Ships in 10 Business Days

$ 669.99 USD

Add to Wish List

Qty

$ 669.99 USD

Add to Wish List

Engineered specifically for the B58TU platform, the VTT Modular Intake System focuses on streamlining the journey from the atmosphere to your turbocharger.

Injen SP Cold Air Intake System - Polished - G29 Z4, A90 MKV Supra B5...

T#:26705011

Part#: SP2300P

In Stock at Vendor

$ 459.99 USD

Add to Wish List

Qty

$ 459.99 USD

Add to Wish List

The all-new 2020-2023 Toyota GR Supra and the BMW Z4 equipped with the B58 3.0L turbo engine are beasts from the factory, so the engineers at Injen Technology needed to design an intake that packed a serious punch to keep up with this athletic and sophisticated performer. The R&D team took these all-new rockets deep into the lab to extract the hidden power lurking under the hood. From start to finish, each aspect of Injen Technology’s traditional aluminum Cold Air Intake for the 2020-2023 Toyota GR Supra and BMW Z4 was a true labor of love. The Injen SP2300 cold air intake has the cleanest installation on the market that is also available in multiple finishes for that personized look. The OE intake tract on the B58 engine is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0" aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. Additionally, the SP2300 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP2300 put down an impressive 15 additional horsepower and 17 pound-feet of tire-scorching torque! KEY FEATURES Dyno Proven gains of up to 15 hp and 17 lb.-ft. of torque Aggressive engine tone under full throttle Provides power gains while maintaining A/F ratios – no additional tuning required Massive 4.00 6061-T6 aluminum intake tubing Smooth intake piping eliminates restrictions and improves airflow Includes custom heat shield specifically designed for this application Aggressive under-hood appearance while maintaining an OE fit Fully serviceable Injen SuperNano-Web dry air filter Available in Polished, Wrinkle Black, and Wrinkle Red Made in Pomona California, USA Injen Technology Limited Lifetime Warranty

Show More Show Less

Injen SES Intercooler Charge Pipe - Wrinkle Red Finish - G29 Z4, A90 ...

T#:26471494

Part#: SES2300ICPWR

In Stock at Vendor

$ 466.99 USD

Add to Wish List

Qty

$ 466.99 USD

Add to Wish List

Take your B58-equipped G29 Z4 or A90 MKV Supra to the next level with this high-performance Injen SES charge pipe. Engineered to optimize airflow and power, these pipes are essential for unlocking your vehicle's full potential. Here's why they're a must-have: Manufactured from 2.75” Lightweight T6-6061 Aluminum Piping Oversized piping reduces restriction providing increased airflow to the engine Our aluminum piping replaces the brittle, failure-prone factory unit. Precision CNC machined quick connect flanges for an OE-Style attachment Includes one 1/8” Female NPT bung Available in Polished, Wrinkle Black, and Wrinkle Red finishes Seamlessly adapts with the OE Intercooler Precision CNC machined, and TIG-Welded sensor flanges included Stainless Steel Band Clamp with Inner Protective Liner Automotive Grade Silicone Couplers Unique CNC Machined Injen Logo Plate for a Refined Style Increase Throttle Response and Decreases Turbo Lag Beaded Tube Ends to Help Prevent Couplers from Coming Off Mandrel-bent Tubing for Increased Flow Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation Made in Pomona California, USA Injen Technology Limited Lifetime Warranty Crafted by Injen Technology, these intercooler pipes undergo extensive testing and refinement, delivering noticeable bolt-on power. Elevate your vehicle's performance today and feel the difference on the road.

Show More Show Less

Injen SP Cold Air Intake System - Wrinkle Black - G29 Z4, A90 MKV Sup...

T#:26705012

Part#: SP2300WB

In Stock at Vendor

$ 459.99 USD

Add to Wish List

Qty

$ 459.99 USD

Add to Wish List

The all-new 2020-2023 Toyota GR Supra and the BMW Z4 equipped with the B58 3.0L turbo engine are beasts from the factory, so the engineers at Injen Technology needed to design an intake that packed a serious punch to keep up with this athletic and sophisticated performer. The R&D team took these all-new rockets deep into the lab to extract the hidden power lurking under the hood. From start to finish, each aspect of Injen Technology’s traditional aluminum Cold Air Intake for the 2020-2023 Toyota GR Supra and BMW Z4 was a true labor of love. The Injen SP2300 cold air intake has the cleanest installation on the market that is also available in multiple finishes for that personized look. The OE intake tract on the B58 engine is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0" aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. Additionally, the SP2300 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP2300 put down an impressive 15 additional horsepower and 17 pound-feet of tire-scorching torque! KEY FEATURES Dyno Proven gains of up to 15 hp and 17 lb.-ft. of torque Aggressive engine tone under full throttle Provides power gains while maintaining A/F ratios – no additional tuning required Massive 4.00 6061-T6 aluminum intake tubing Smooth intake piping eliminates restrictions and improves airflow Includes custom heat shield specifically designed for this application Aggressive under-hood appearance while maintaining an OE fit Fully serviceable Injen SuperNano-Web dry air filter Available in Polished, Wrinkle Black, and Wrinkle Red Made in Pomona California, USA Injen Technology Limited Lifetime Warranty

Show More Show Less

Genuine BMW Charge Air Induction Tract - 13718601684

T#:222876

Part#: 13718601684

Ships in 1 day

6% off MSRP $ 561.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 527.99 USD

Add to Wish List

Qty

6% off MSRP

$ 561.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 527.99 USD

Add to Wish List

Genuine BMW air induction tract. Runs from the turbo to the throttle body

Genuine BMW Turbo Inlet Adapter - BMW G20 G22/23/26 G42 G01 G02 G29 B...

T#:601132

Part#: 11618689501

Ships in 1 day

6% off MSRP $ 194.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 183.99 USD

Add to Wish List

Qty

6% off MSRP

$ 194.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 183.99 USD

Add to Wish List

This adapter pipe is located at the turbo inlet on the B58D (B58TU) engine. New seals and three captive mounting bolts are included with this adapter.

Forge Silicone Vacuum Hoses

T#:558490

Part#: FORGEVAC

Ships on Aug 11, 2026

Starting at $ 14.99 USD

Add to Wish List

Starting at $ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? Choose from a 4mm, 5mm, or 6mm diameter vacuum hose from Forge to fix your leak and bring your BMW back to life.

MST Toyota Supra A90 A91/BMW Z4 B58 3.0L Cold Air Intake System + Tur...

T#:51883713

Part#: TY-SUP05

Special Order: No Guaranteed ETA

$ 635.99 USD

Add to Wish List

Qty

$ 635.99 USD

Add to Wish List

Cold Air Intake System & Turbo Inlet Pipe - A90 Toyota Supra, G29 BMW...

T#:5108970

Part#: TY-SUP01L

Special Order: No Guaranteed ETA

$ 578.99 USD

Add to Wish List

Qty

$ 578.99 USD

Add to Wish List

New MST 2021 Toyota Supra A90/A91 V2 Intake System. MST has released a V2 for the Supra Intake which has better performance. For the V2, MST added a turbo inlet which has a 3.5-inch diameter. Also to mention, the crazy sound it makes. The V2 brings improved throttle response & even better performance. Features : Delivers cold air to your turbocharger 4" intake pipe 4" air filter Improved throttle response More aggressive and sporty induction sound Black powder-coated inlet pipe and heat shield Easy to maintain DRY cone air filter Dyno result: Max gains 12-14hp Fits: Toyota Supra A90 A91 BMW Z4 (B58 3.0l turbo) Please note, MST Performance Intakes/Inlets are NOT CARB COMPLIANT and are for off road and racing use only. By purchasing an MST Performance intake, you understand that these may only be used for off road and racing use only for unregistered vehicles. Please check with your local, state, and federal laws to see if these products are legal for use in your area. By purchasing an MST Performance product, you understand and agree to these terms and accept all liability.

Show More Show Less

MST 2019-2025 Toyota Supra B48 2.0L - BMW Z4 Cold Air Intake System ...

T#:51883718

Part#: TY-SUP06

Special Order: No Guaranteed ETA

$ 613.99 USD

Add to Wish List

Qty

$ 613.99 USD

Add to Wish List

Improve your performance with this aggressive sounding MST Cold Air Intake.

FTP Intake Pipe (inlet pipe) - A91 Supra B48 2.0L

T#:5788177

Part#: FTPG58INTK

Special Order: No Guaranteed ETA

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

FTP has devised a solution to the fragile plastic inlet pipe dilemma that plagues most modern turbocharged cars! This intake pipe eliminates the OEM pipe and fits between the air filter and turbo. Due to the metal design, this prevents flexing under boost while also eliminating the worry of cracking! Features: Strengthened metal design Improved air flow to turbo Direct OE Fitment

Show More Show Less

3" To 2.5" Silicone Coupler 3" Length

T#:363896

Part#: 003402ECS04A-02

Ships on Sep 8, 2026

Sale - Save 10% $ 9.99

This product was last offered at the strikethrough price on
06-13-2026

$ 8.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 9.99

This product was last offered at the strikethrough price on
06-13-2026

$ 8.99 USD

Add to Wish List

3" To 2.5" Silicone Coupler 3" Length

Enhance the performance and durability of your BMW or MINI with the 3" To 2.5" Silicone Coupler 3" Length. This silicone coupler provides a reliable connection between components, ensuring optimal airflow and reducing the risk of leaks. Engineered for durability and heat resistance, it withstands high temperatures and harsh conditions. Upgrade your BMW or MINI with this premium silicone coupler for improved performance.

Reliable connection for optimal airflow
Reduces the risk of leaks for enhanced performance
Engineered for durability and heat resistance
Fits both BMW and MINI models

Show More Show Less

MMX Performance High Flow Cotton Panel Air Filter - G2X G42 B46/B48 B...

T#:22361047

Part#: MMR01-1701

Special Order: No Guaranteed ETA

$ 102.99 USD

Add to Wish List

Qty

$ 102.99 USD

Add to Wish List

Looking for a simple, warranty-friendly upgrade for your car? One of the easiest and best ways to upgrade the breathing abilities of the latest BMW G-Series with 2.0 B48/B46 4-cylinder and 3.0 turbo B58TU 6-cylinder engines is with an MMX replacement performance panel air filter. Allow your engine to breathe better and operate more efficiently – and so improve the engine’s airflow, and power and fuel economy gains will follow. By removing the inevitable restrictions that the standard paper panel filter gives, MMR's Panel Filter allows a small but worthwhile increase in airflow through to the turbo. MMR has developed our own range of MMR performance cotton gauze filters that easily drop into the OE airbox which provide excellent filtration properties, combined with instant performance increases and induction noise enhancements. MMR's tests have shown that it can deliver an additional 15NM of torque on a standard B58 engine. A small but worthwhile difference. Meanwhile, OEM standards of design, quality, materials, and construction mean it fits like a factory part; and lasts like a factory part. This filter is applicable for a wide range of G-Series cars - covering all of the 2.0 4-cylinder and 3.0 6-cylinder versions in these vehicles. FEATURES Increased engine performance Improved induction noise Designed to be used with the OE air filter housing Easily fitted and completely washable. Once fitted this product will last the lifetime of your engine

Show More Show Less

Track Series Stage-2 Carbon Fiber Intake System W/ Pro DRY S Filter ...

T#:14155789

Part#: 57-10017D

Back Ordered

$ 773.00 USD

Add to Wish List

Qty

$ 773.00 USD

Add to Wish List

With 53% flow increases and a +26 horsepower gain, this intake not only performs well but also looks the part. Made out of 100% carbon fiber, this intake is very lightweight and also washable thanks to the Pro Dry S air filter. The installation is almost as simple as it is to say that there is no better intake option for your car!

Show More Show Less

AFe Power Takeda Momentum Cold Air Intake System - Pro 5R Filter - To...

For 2021+ model years only

T#:3283357

Part#: 56-70050R

Back Ordered

$ 456.99

This product was last offered at the strikethrough price on
01-28-2026

$ 435.00 USD

Add to Wish List

Qty

$ 435.00 USD

Add to Wish List

DETAILS: Dyno-Proven Gains up to +14 HP & +22 Lbs. x Ft. TQ Outflows Factory Intake by 16% Measured Flow: 370 CFM @ 7” H20 Washable and Reusable Pro 5R Air Filter for Maximum Performance Clear Sight Window for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Fits With Factory and aFe CONTROL Strut Bar Large Five Layer Performance Air Filter: This 7-1/2” tall 360-degree radial flow air filter features a 4” round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best for street and track use. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Toyota Strut Brace: The Takeda intake is designed to fit with the factory and aFe CONTROL strut brace, with no modifications necessary. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Premium stainless steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

4MM Silicone Vacuum Hose - Blue - 9 Feet

T#:370917

Part#: VC04

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

AFe Power BladeRunner Hot Side Intercooler Tube - Blue - G29 Z4 M40i ...

T#:599367

Part#: 46-20408-L

Back Ordered

$ 430.00 USD

Add to Wish List

Qty

$ 430.00 USD

Add to Wish List

Directly replace your Z4's restrictive plastic intercooler tube with aFe's BladeRunner free-flowing, heat-resistant aluminum tube. TIG-Welded 2-1/2" To 3"" Aluminum Tubing Features Factory Style Quick-Connect With an O-Ring Seal Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Couplings 1/8" NPT Port is Provided for Connecting Sensors or Water Methanol Injection Powder Coated Matte Blue for Heat and Corrosion Resistance Flow and Performance: Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. Perfect Fit: This tube kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This intercooler tube kit features a factory style billet aluminum quick-connect adapter with an O-ring seal to ensure a leak-free fit while maintaining superior strength and durability. Custom Appearance: Finished in Matte Blue powder coating with a unique laser-etched aFe power logo for a custom look. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

3MM Silicone Vacuum Hose - Red - 9 Feet

T#:370915

Part#: VC03R

Back Ordered

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Upgrade your BMW's vacuum system with the Forge 3MM Silicone Vacuum Hose in Red, a high-quality solution designed for optimal performance and durability. This 9-foot silicone vacuum hose provides superior flexibility and resistance to extreme temperatures, making it ideal for various automotive applications. Engineered with precision, it ensures reliable vacuum pressure for efficient engine operation and component functionality. Whether you're replacing worn-out hoses or customizing your BMW's vacuum setup, the Forge Silicone Vacuum Hose offers reliability and performance you can trust.

High-quality silicone construction for durability
Superior flexibility for easy installation
Resistant to extreme temperatures
Ensures reliable vacuum pressure for efficient engine operation
Ideal for various automotive applications

Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter.

Show More Show Less

4MM Silicone Vacuum Hose - Black - 9 Feet

T#:370919

Part#: VC04B

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

AFE Takeda Stage-2 Cold Air Intake System W/Pro 5R Filter

T#:5677369

Part#: 56-10015R

Ships in 3 Business Days

$ 389.00

This product was last offered at the strikethrough price on
01-28-2026

$ 387.00 USD

Add to Wish List

Qty

$ 387.00 USD

Add to Wish List

Feautures: Dyno-Proven Gains up to +26 HP & +27 Lbs. x Ft. TQ Outflows Factory Intake by 53% Measured Flow: 505 CFM @ 7” H20 Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Washable and Reusable Pro 5R Air Filter for Maximum Performance Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Fits With Factory and aFe CONTROL Strut Bar Large Three Layer Performance Air Filter: This 7” tall 360-degree radial flow air filter features a 4” oval flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. Unique One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Dyno-Tuned Intake Tube: The tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Fitment Note: This intake is designed to fit models equipped with the factory strut brace, with no modification required. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

Ships in 5 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

#4 Water Methanol Nozzle - 4 GPH

T#:13957879

Part#: SNO-N0400

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Boost Cooler Forced Induction Progressive Engine Mount Water-Methanol...

T#:641833

Part#: SNO-20010

In Stock

$ 520.99 USD

Add to Wish List

Qty

$ 520.99 USD

Add to Wish List

Keep BMW boost temperatures in check with the Snow Performance Stage 2 Boost Cooler water methanol injection kit, suitable for all forced induction applications (Supercharged/Turbocharged). This kit enhances performance and cooling, especially beneficial for direct-injected engines, effectively removing carbon build-up on valves.

Suitable for all forced induction applications (Supercharged/Turbocharged)
Simple handheld display for easy injection point adjustment
VC-30 progressive controller with digital display and MAP sensor for precise injection
Adjustable start and full points for optimal engagement
Proportional injection based on boost pressure for accurate delivery
Improves drivability and provides cooling benefits
Recommended for street/strip driven gas forced induction vehicles
OEM approved water methanol injection pump with proprietary heat flange
Extreme Environment 300 PSI UHO pump for durability in elements
100% methanol resistant components for longevity
ACU-SEAL compression fittings for leak-free operation
Increases induction charge density for enhanced performance
Made in the U.S.A. and supports 1,000+ HP

Show More Show Less

Snow Performance Water Methanol Injection Nozzle - 8GPH

T#:17040324

Part#: SNO-N0800

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

AEM V3 Universal Water/Methanol Injection Kit (30-3300)

T#:369781

Part#: 30-3000

In Stock

11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Qty

11% off MSRP

$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing

Show More Show Less

AEM V3 Water/Methanol Injector Kit (Qty 2)

T#:20815166

Part#: 30-3313

In Stock

12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

Qty

12% off MSRP

$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.

Show More Show Less

High Flow Water-Methanol Solenoid Upgrade - Quick-Connect Fittings ...

T#:598937

Part#: SNO-40060

In Stock

$ 73.00 USD

Add to Wish List

Qty

$ 73.00 USD

Add to Wish List

Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: Robust Methanol Resistant Stainless Steel/Zinc Design High PSI Solenoid Designed to Be Used Between Pump & Injection Point Two Brackets Mounted To Solenoid For Easy Install Pigtail Harnessed Wiring Connections Easy to Read "Flow" Indication 2 Quick Connect Fittings To 1/4" High Temp Nylon Tubing Large 3/16" Orifice For Maximum Flow Through System

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

In Stock

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

Water/Methanol Nozzle - 6GPH

T#:21374127

Part#: SNO-N0600

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Water-Methanol Dual Nozzle Upgrade - Quick-Connect Fittings

T#:598936

Part#: SNO-40040

In Stock

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Low Profile Water-Methanol Nozzle Holder 4AN 90* Elbow

T#:640584

Part#: SNO-809-BRD

In Stock at Vendor

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

SnowPerformance Stage 2.5 Boost-Controlled Water/Meth Injection Kit -...

T#:380988

Part#: SNO210

In Stock

$ 583.99 USD

Add to Wish List

Qty

$ 583.99 USD

Add to Wish List

The Snow Performance Stage 2 Boost Cooler is the most advanced gauge style water-meth system on the market. This kit includes a boost referenced VC-50 controller, the Stage 2 has the ability to progressively command 2 Hyper-Sonic Nozzles on an independent basis.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

N1000 - Snow Performance Water Injection Nozzle

T#:2317846

Part#: SNO-N1000

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Red High Temp Nylon Tubing - 20ft

T#:640586

Part#: SNO-8087

In Stock at Vendor

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

High Flow Water Methanol Check Valve

T#:2317849

Part#: SNO-8CV-QC

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Aug 7, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol In...

T#:21374123

Part#: SNO-211-BRD

In Stock at Vendor

$ 909.99 USD

Add to Wish List

Qty

$ 909.99 USD

Add to Wish List

Snow Performance Water Methanol Injection Nozzle - 7GPH

T#:17040323

Part#: SNO-N0700

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Constructed out of 100% methanol resistant nickel plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a removable 80 micron filter, the Hyper-Sonic nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today! (1/8" NPT Threads)

Show More Show Less

GAS STAGE 3 DIRECT INJECTION WATER METHANOL CONTROLLER

T#:586250

Part#: SNO-60300

In Stock at Vendor

$ 416.99 USD

Add to Wish List

Qty

$ 416.99 USD

Add to Wish List

Stage 2 Boost Cooler Forced Induction Progressive Engine Mount Water-...

T#:641841

Part#: 20010-BRD

In Stock at Vendor

$ 625.00 USD

Add to Wish List

Qty

$ 625.00 USD

Add to Wish List

Turner Motorsport presents the Snow Performance Stage 2 Boost Cooler Water Methanol Injection Kit, ideal for all forced induction applications, including supercharged and turbocharged BMWs. With its easy-to-use handheld display screen, this kit allows precise control over injection points and can be conveniently mounted for access. The VC-30 progressive controller adjusts water/methanol injection based on boost pressure, providing accurate delivery for improved drivability and cooling benefits. This kit is recommended for street/strip driven gas forced induction vehicles seeking cooling over a wide range, especially beneficial for direct-injected engines to remove carbon buildup on valves. Key benefits include: