Vargas Turbo Technologies for BMW Z Series G29 (2019+)

VTT “OBD-LOCK” ODB Port Locking Tool

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles Produced After 1995

T#:26938503

Part#: VTT-OBD-LOCK

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer our “OBD-LOCK” OBD port locking tool. This is tool is made from billet 6061-T6 aluminum and is designed to completely lock out your OBD port from being accessed. This is useful for people who do not want dealers, techs, etc from accessing their OBD port, and possibly changing a tune, etc. This is also perfect for anti-theft prevention as it will not allow a would-be thief to hook up to the car’s OBD port, duplicate a key, etc. The OBD-LOCK cannot be removed without physically destroying the OBD port if you do not have the proper tools. VTT uses 5 types of screw head designs for every 200 OBD-LOCKS made. This means that worldwide only 40 OBD-LOCKS are using the same head design. For each batch of 200, we redesign the screw heads meaning every batch of 200 OBD-LOCKS will use different screw heads and tools. Each OBD-LOCK sent has its head design chosen at random. After Extensive testing, we have found that our OBD lock fits EVERY SINGLE OBD port we have tried, this means it will fit every single OBD port currently on the market from a high-end BMW to a Ford F150 diesel.

Show More Show Less

VTT Billet Coolant Reservoir Cap - Anodized Blue - Most BMWs 2006+ (E...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7530036

Part#: COOLANTCAPBLUE

In Stock

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

Vargas Turbo Wheel Stud Conversion Kit - G2X, A90/A91 Supra

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641936

Part#: M14125-STUD

In Stock

$ 145.99 USD

Add to Wish List

Qty

$ 145.99 USD

Add to Wish List

Wheel studs are among the safest and beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go. With studs you won't have to worry about dropping your expensive wheels onto the brake rotor. This kit includes: M14x1.25 to M14x1.50 CONVERSION Wheel studs in Black (20) M14x.1..5 19mm Black opened ended lug nuts (20) *Note: Apply Medium duty lock-tite to the studs (short thread end) and torque to 25 ft/lb. Lug nuts should be torqued to OEM specifications. For your safety retorque all hardware (studs and nuts) after 25-50 Miles

Show More Show Less

VTT M14 Titanium Wheel Stud Kits

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7292018

Part#: TISTUD201425

Back Ordered

Starting at $ 335.99 USD

Add to Wish List

Starting at $ 335.99 USD

Add to Wish List

VTT is proud to offer Titanium wheel stud kits for the vehicle owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. VTT kit details are as follows: Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength Grade 5 Titanium nuts with 60-degree cone seat to fit most all aftermarket wheel applications M5 Hex for easy installation Three Colors Available – Raw, Black, Burnt M14x1.25x75mm on the small end to M14x1.5 on the long end. This will convert M14x1.25 cars into M14x1.5 pattern Installation notes: Apply locktite to the studs (short end) and torque to 20 ft/lb. Lug nuts should be torqued to factory specifications. For safety retorque all hardware (studs and nuts) after 25-50 miles.

Show More Show Less

VTT Billet Coolant Reservoir Cap - Anodized Red - Most BMWs 2006+ (E/...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7530034

Part#: COOLANTCAPRED

In Stock

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

B58TU / B48TU One Way Crankcase Breather - G Chassis

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For models with the Gen2 B58 or B48 engines only (B58TU / B48TU)

T#:25606657

Part#: VTTB58BREATHERTU

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all B58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter Is your car a Gen1 or TU? Pull your oil cap off, and check how it attaches. 2 Prong style is Gen-1, snap-in style with grooves is TU.

Show More Show Less

VTT B58/S58 Cylinder Head Port Block-Off Kit - BMW B58 Gen1/2/3 (B58/...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49822557

Part#: VTTBS58BLOCK

In Stock

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.

Show More Show Less

VTT Billet Engine Stand Plate - B58/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:10128424

Part#: VTT-ENGPLT-V2

Back Ordered

Starting at $ 112.99 USD

Add to Wish List

Starting at $ 112.99 USD

Add to Wish List

Do you work on a lot of BMW engines from various platforms? Tired of having to adjust universal engine stand plates to fit your engine? Hate not having access to the flywheel end with the engine on the stand? Vargas answered yes to all of those things and made a tool for anyone that works on BMWs often, and wanted a strong bolt-on engine stand plate that keeps the flywheel end of the engine open! The engine stand plates are machined from a solid billet of 6061-T6 aluminum and anodized in 5 colors for long-lasting corrosion resistance. These are lightweight, and rated for over 1200 lbs!

Show More Show Less

VTT Billet Coolant Reservoir Cap - Anodized Clear - Most BMWs 2006+ (...

This coolant cap retains ALL of the factory provisions by simply allowing you to snap t...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7530035

Part#: COOLANTCAPRAW

Ships in 3 Business Days

$ 78.99 USD

Add to Wish List

Qty

$ 78.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:638811

Part#: VTT-B58-VACCUM

Ships in 10 Business Days

Starting at $ 52.99 USD

Add to Wish List

Starting at $ 52.99 USD

Add to Wish List

Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.

Show More Show Less

VTT Billet/Silicone Cylinder Head Cooling Hose - B58TU

For vehicles with a production date from 10/17

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29334026

Part#: VTT-B58TU-UCH

Ships in 10 Business Days

Starting at $ 209.99 USD

Add to Wish List

Starting at $ 209.99 USD

Add to Wish List

Positioned directly in the charge pipe's path, the stock B58TU upper cylinder head cooling hose, primarily made of plastic, is prone to damage. A dislodged charge pipe can easily take out this cooling hose, leading to severe engine damage through rapid coolant loss and overheating.

To address this vulnerability, VTT has engineered a robust solution. By replacing the OEM rubber hose with a durable 7-ply silicone variant, they offer superior resilience and longevity. Furthermore, they've upgraded the factory plastic flanges to 6061-T6 billet aluminum with black anodizing, enhancing corrosion resistance.

This upgraded hose is the ultimate solution, providing protection against dislodged charge pipes and the heat generated from spirited driving or track use.

Key Features:

Direct factory replacement for easy installation 6061-T6 billet aluminum with black anodizing for improved corrosion resistance Durable 7-ply silicone available in three colors Upgrade your BMW B58TU engine with this enhanced cooling hose from Vargas Turbo Technologies for superior performance and reliability.

Show More Show Less

VTT BMW G Series Billet Oil Cap - Blue Anodized

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641130

Part#: OILCAPBLUE1

In Stock

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

Vargas Ignition Coil Kit (Red) - B58/B48/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5309604

Part#: VTT-COIL-B58-RED

Ships in 5 Business Days

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

VTT Carbon Fiber Dragy Holder

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20749252

Part#: VTT-DHCF

Ships in 10 Business Days

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

These are made from 100% Pre-Preg Carbon Fiber for a perfect fit. The carbon fiber gives it just the right look to add to your performance vehicle! Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features Stop your Dragy from flying off the dash and having to search for it Position your Dragy in the optimal position for the best satellite coverage VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite The charging port is not blocked and can be accessed with the cover on

Show More Show Less

VTT BMW G Series Billet Oil Cap - Red Anodized

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641120

Part#: OILCAPRED1

Ships in 10 Business Days

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

Vargas Billet Water Neck - B58 Mk5 Supra/G29 Z4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7292067

Part#: VTT-A90G29-WN

Ships in 10 Business Days

$ 147.99 USD

Add to Wish List

Qty

$ 147.99 USD

Add to Wish List

The Factory B58 TU water neck is plastic and is right in the path of your charge pipe if you lose a connection and it blows off. If this does happen to you it can break the plastic neck emptying your coolant in seconds causing you in the best-case scenario to be stranded, and in the worst-case scenario expensive engine damage. Add some cheap insurance with Vargas' Billet Water neck. Product Details: Plug and play direct factory replacement 6061-T6 Billet aluminum with black anodizing for a corrosion-free life Cheap insurance against a blown charge pipe which could turn into a blown motor

Show More Show Less

VTT Wireless Plug & Play Line Lock Kit - BMW F22/23 F3X F8X G2X G...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:41965005

Part#: VTT-WIRELESS-LL

Ships in 10 Business Days

$ 629.99 USD

Add to Wish List

Qty

$ 629.99 USD

Add to Wish List

VTT now offers a truly plug-and-play line lock kit for select BMW vehicles that does NOT require running wiring inside the car, mounted switches, holes in the dash, etc. VTT's newly designed and released line lock kits utilize a 40amp wireless remote control switch with four different modes, allowing you to tailor your line lock setup exactly as you prefer.

Show More Show Less

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...

For vehicles with VTT Valve Cover

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52129732

Part#: VTT-TI-BOLTS-2-B

Back Ordered

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51813315

Part#: VTT-TI-DRAIN

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

VTT Billet Coolant Reservoir Cap - Anodized Black - Most BMWs 2006+ (...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7530033

Part#: COOLANTCAPBLK

Back Ordered

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit

Show More Show Less

VTT Engine Lifting Hook - B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4921509

Part#: VTT-B58-HOOK

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Vargas' engine lifting hook designed to help those needing BMW's engine lifting tab but at less cost and less wait time. Made out of coated steel for high strength, long life, and corrosion resistance. Fits all B58 models. Note: Fitment for S58 has not yet been confirmed.

Show More Show Less

VTT Billet Cylinder Head Lifting Tool (Red) - B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4921505

Part#: VTT-HH-RED-B58

Ships in 10 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on B58 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler B58 only requires short extensions and comes with M6 bolts Note: Fitment not yet confirmed for S58 Engine

Show More Show Less

VTT BMW G Series Billet Oil Cap - Black Anodized

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641127

Part#: OILCAPBLK1

Ships in 10 Business Days

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Get rid of the plastic oil cap on your BMW and add some nice billet pop to your engine bay. Look no further than the VTT Billet Oil cap. These are a true Billet oil cap machined from 6061-T6 aluminum and anodized in a variety of colors. These are NOT a thin cap that snaps over your existing oil cap.

Show More Show Less

Vargas Ignition Coil Kit (Black) - B58/B48/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5309601

Part#: VTT-COIL-B58-BLK

Ships in 10 Business Days

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less

VTT Billet Cylinder Head Lifting Tool (Blue) - B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4921507

Part#: VTT-HH-BLUE-B58

Ships in 10 Business Days

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on B58 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler B58 only requires short extensions and comes with M6 bolts Note: Fitment not yet confirmed for S58 Engine

Show More Show Less

VTT Plastic Dragy Holder

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20749254

Part#: VTT-DHPLS

Ships in 10 Business Days

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

These are made from molded plastic for a perfect fit. Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features Stop your Dragy from flying off the dash and having to search for it Position your Dragy in the optimal position for the best satellite coverage VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite The charging port is not blocked and can be accessed with the cover on

Show More Show Less

VTT Billet Cylinder Head Lifting Tool (Black) - B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4921508

Part#: VTT-HH-BLK-B58

Ships in 10 Business Days

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The Vargas cylinder head tool is machined from a solid billet of 6061-T6 aluminum and anodized in color for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting. For those who do a lot of extensive work with various BMW models. Vargas has developed a tool for anyone that works on BMWs often, and needs a way to easily remove, install, or transport a cylinder head. A helpful tool for those who frequently work on B58 engines and want to ensure proper removal and installation without potential damage to components! What you get: 1 Head Handler B58 only requires short extensions and comes with M6 bolts Note: Fitment not yet confirmed for S58 Engine

Show More Show Less

VTT B58TU GC-MID Turbocharger Upgrade - 6-Port Manifold B58 3.0L Engi...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25971905

Part#: B58TUGCMID6P

Ships in 10 Business Days

$ 2,404.99 USD

Add to Wish List

Qty

$ 2,404.99 USD

Add to Wish List

Upgrade your BMW B58 engine with the VTT GC-MID Stock-650WHP (TU ONLY) turbocharger for unparalleled performance gains. VTT's turbocharger offers easy installation, eliminating core charges and long lead times associated with traditional upgrades. With enhanced design elements and OE-quality castings, this turbocharger supports over 600WHP while maintaining factory spool and connections.

All-new castings with factory restrictions removed
Full 3' turbocharger inlet size with included silicone inlet elbow
9-blade turbine and compressor wheels for increased flow and spool
Direct connection to all factory lines
Redesigned internal components for improved performance
No core charges and no long lead times
Full 12-month unlimited mileage warranty

Show More Show Less

VTT Carbon Fiber Airbox Lid & Filter Kit - G20, G29, A90 B58 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:29334009

Part#: VTT-G2X-CF-LID-1

Ships in 10 Business Days

$ 444.99 USD

Add to Wish List

Qty

$ 444.99 USD

Add to Wish List

Enhance your engine bay's aesthetics with the sleek carbon fiber airbox lid from Vargas Turbo Technologies!

VTT rigorously tested the stock air intake on a dynamometer and found limited areas for enhancement. Drawing inspiration from BMW's design, VTT crafted a carbon fiber lid for the factory airbox.

Constructed entirely from 100% carbon fiber, this lid features an eight-layer design with a 1.3mm thick UV-resistant shell, ensuring long-lasting durability.

The included high-performance air filter, made from a high-flow cotton weave, comes pre-oiled to trap contaminants while maintaining optimal airflow.

Key Features:

50-state emissions compliant Simple, straightforward installation Stunning carbon fiber appearance Reusable high-performance air filter Easily reversible upgrade Transform your B58-equipped BMW with the Carbon Fiber Airbox Lid & Filter Kit from Vargas Turbo Technologies today!

Show More Show Less

Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52094591

Part#: VTT-FAB-062

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.

Vargas Billet Coolant Block-Off - BMW B58 Engine

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52094566

Part#: VTTFAB040BLKB58

Ships in 10 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Engineered for precision and durability, the VTT-FAB-040 B58 Block-Off Flange is the definitive solution for managing oil and coolant paths during fabrication.

VTT Turbocharger Inlet Flange - Garrett G40/42/45 V-Band - 86mm ID ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52270240

Part#: GARROUTT4G4045

Ships in 10 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

Vargas DCS EWG System Billet Adapter With BMW Actuator - BMW ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52094552

Part#: VTT-DCS-EWG-W-AC

Ships in 10 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.

Vargas Remote Oil Cooler Adapter - BMW B58, Toyota A90/A91

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51778122

Part#: VTT-B58-OIL-COOL

Ships in 10 Business Days

$ 157.99 USD

Add to Wish List

Qty

$ 157.99 USD

Add to Wish List

The VTT Billet B58 Remote Oil Cooler Adapter is an ideal upgrade for B58-powered platforms.

Vargas Crank/Vibration Damper Bolts - M10 x 1.5

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51778130

Part#: VTT-BMW-DAMPER-B

Ships in 10 Business Days

$ 157.99 USD

Add to Wish List

Qty

$ 157.99 USD

Add to Wish List

Protect your investment with the VTT/ARP 8740 Crank Vibration Damper Bolt kit.

Vargas Plug & Play Pre And Post Throttle MAP Sensor Kit - 6B 4W -...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52129729

Part#: VTT56BSENSKIT64

Ships in 10 Business Days

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

The VTT 6-Bar MAP sensor kit provides the necessary overhead to monitor boost levels with a linear voltage scale that makes software calibration straightforward.

Vargas Double Adjust Drag Shock Kit - BMW F3X, G2X, Toyota A90/91 Sup...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51778129

Part#: VTT-F/G-DRAG-SHO

Ships in 10 Business Days

$ 1,104.99 USD

Add to Wish List

Qty

$ 1,104.99 USD

Add to Wish List

Maximize your BMW’s potential at the drag strip with the VTT Double Adjust Drag Shock Kit.

Vargas Billet Extended Turbo Drain Adapter - -10AN Male - Garrett GT,...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52094592

Part#: VTT-FAB-063

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Simplify your single-turbo conversion or custom build with the VTT-FAB-063 Billet Extended Drain Adapter.

Vargas Billet Oil Drain Adapter - -10AN Male - BMW B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52094563

Part#: VTT-FAB-040-AN

Ships in 10 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT-FAB-040 is a high-performance billet aluminum adapter flange specifically engineered for the BMW B58 engine platform.

Vargas Billet Extended Turbo Drain Adapter - Garrett G-Series ...

For vehicles with Garrett GT, GTX, G series or T3/T4 Turbos

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52129707

Part#: VTT-FAB-064

Ships in 10 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

The VTT-FAB-064 by Vargas is a precision-engineered solution for enthusiasts and fabricators building high-performance Garrett-based turbo systems.

Vargas Carbon Fiber Airbox Lid & Filter Kit - BMW G29 Z4, Toyota ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51778121

Part#: VTT-SUPRA-CF-LID

Ships in 10 Business Days

$ 444.99 USD

Add to Wish List

Qty

$ 444.99 USD

Add to Wish List

Elevate the performance and visual appeal of your B58-powered Supra or Z4 with the VTT Carbon Fiber Intake Lid and Filter system.

Vargas Charge Pipe Weld MAP Sensor Bung Flange - BMW B48, B58, S58 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52094555

Part#: VTT-FAB-015

Ships in 10 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The VTT-FAB Billet MAP Sensor Bung is the definitive choice for tuners and fabricators seeking a reliable mounting solution for B48, B58, and S58 platforms.

VTT Valve Cover Gasket - BMW B58 TU

For vehicles with VTT Valve Cover

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52129727

Part#: VTTVCGASKB58TU

Ships in 10 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The VTT Gasket for the B58 TU Billet Valve Cover is an essential component designed for enthusiasts running the Vargas Billet Aluminum Valve Cover.

VTT Billet Oil Cap Crankcase Vent Adapter - Screw In - BMW S58, B58TU...

For vehicles with VTT Billet & Cast Valve Covers

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:52270290

Part#: OC16OADAPSC

Ships in 10 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Engineered for those who demand total control over their PCV system, the VTT Screw-In Oil Cap Adapter provides a robust solution for crankcase ventilation.

Vargas Coolant Level Extension Harness - BMW B48/B58/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51813310

Part#: VTT-FAB-HC

Ships in 10 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Simplify your next fabrication project with the VTT-FAB series Coolant Extension Harness.

VTT Low-Profile Crankcase Vent Adapter -16ORB - BMW S58, B58TU ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51672705

Part#: VTT-S/B58-LP-CC-

Ships in 10 Business Days

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

The VTT Low-Profile Crankcase Vent Adapter is the definitive solution for high-boost BMW builds where hood clearance is a premium.

Vargas Ignition Coil Kit (Blue) - B58/B48/S58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5309599

Part#: VTT-COIL-B58-BLU

Ships in 10 Business Days

$ 220.99 USD

Add to Wish List

Qty

$ 220.99 USD

Add to Wish List

Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for the B58. VTT B58 Coils are tested against a factory Bosch B58 coil. The VTT performance matches or exceeds the factory B58 Bosch Coil. The coils are offered in a choice of black, red, and blue.

Show More Show Less