BMW Engine Parts for BMW 5 Series G30 (2017+)

Connecting Rod Bearing Set - 0.75mm Oversize

+0.75mm

T#:26638197

Part#: CR6887SV0.75

Back Ordered

$ 237.99 USD

Add to Wish List

Qty

$ 237.99 USD

Add to Wish List

Introducing King Connecting Rod Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. King Rod Bearings for BMW Engines come in a full set, including 6 upper and 6 lower bearing shells, suitable for 6 Con-Rods. The Upper and Lower bearing shells are comprised of a lead-free, Silver-based tri-metal material designed for extreme load applications. Engineered with meticulous attention to detail, King bearings are designed to exact standards to ensure optimal fitment and compatibility with BMW engines. Experience improved smoother engine operation with King Bearings.

Show More Show Less

BMW Crankshaft Pulley Bolt

T#:46478558

Part#: HWB0074

Ships in 3 Business Days

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

URO Oil Filter Housing And Cooler Assembly - BMW B46D 2.0L ...

2X Entries For Our G87 M2 Sweepstakes!

T#:43750192

Part#: 11428580414

Ships in 1 Business Day

$ 364.99 USD

Add to Wish List

Qty

$ 364.99 USD

Add to Wish List

The factory oil filter housing has proven to be defective, often cracking internally, which leads to a mixture of oil and coolant and plastic contaminants being forced into the coolant and oil passages. This could lead to complete engine failure if not properly addressed in time. This replacement oil filter housing and cooler is a great replacement option to restore your BMW's oil filtration system without having to pay Genuine BMW retail prices of $650 or more for the same components.

Show More Show Less

JE Pistons BMW B48 2.0T

T#:33746553

Part#: 384913

Back Ordered

$ 924.99 USD

Add to Wish List

Qty

$ 924.99 USD

Add to Wish List

Here’s another description for the JE Pistons for BMW B48 2.0T with 83.00MM / -18.7CC specs, focusing on a more engaging and performance-oriented tone:

JE Pistons for BMW B48 2.0T - 83.00MM Bore, -18.7CC Dish Volume

Unleash Your Engine’s Potential with JE Pistons

Take your BMW B48 2.0T to new heights with JE’s precision-engineered forged pistons. Designed for performance enthusiasts who demand power and reliability, these pistons are ideal for high-boost applications and help maximize your engine’s capabilities.

Engine Fitment: Tailored specifically for the BMW B48 2.0T engine, compatible with popular models like the BMW 3-Series (G20), X1, and MINI Cooper S.
Bore Size: 83.00MM for optimal fit and sealing within the cylinder, enhancing overall engine performance.
Dish Volume: -18.7CC, providing a lower compression ratio that allows for higher boost levels while minimizing the risk of detonation in turbocharged applications.
Material: Crafted from high-performance 2618 aluminum alloy, known for its strength and durability, these pistons can withstand extreme conditions typically found in high-powered builds.
Turbo-Optimized Design: The -18.7CC dish design facilitates better airflow and combustion efficiency, making it ideal for turbo setups that require robust performance under pressure.
Advanced Thermal Coating: Equipped with JE’s proprietary thermal barrier coatings to reduce heat absorption and friction, leading to longer piston life and consistent performance under load.
Lightweight Construction: Designed to reduce reciprocating mass, enhancing throttle response and enabling quicker revs, making your engine feel more lively and responsive.
Pre-Balanced and Pin-Fitted: Each piston comes pre-balanced and pin-fitted for straightforward installation, ensuring immediate performance benefits without extensive modifications.

Engineered for Performance and Reliability

Whether you’re hitting the track or enjoying spirited drives, these JE Pistons are engineered to deliver exceptional performance under extreme conditions. With their robust construction and innovative design, you can confidently push your BMW B48 2.0T engine to the limits, enjoying the thrill of enhanced power and reliability every time you hit the road.

Show More Show Less

5mm Single Groove Valve Keeper - Priced Each

T#:21604312

Part#: KPR-5.0-7S

Back Ordered

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Two required per valve, necessary use with certain supertech valves 5.0mm single groove

CP-Carrillo Custom Forged Piston Set - B58

T#:25274993

Part#: CP-FPS-B58-82

Back Ordered

Starting at $ 2,256.98 USD

Add to Wish List

Starting at $ 2,256.98 USD

Add to Wish List

CP-Carrillo sets the industry standard for high-quality pistons, meticulously crafted for optimal power and durability. Crafted with high-strength, lightweight materials and cutting-edge engineering, this BMW B58 piston set offers: Lightweight Design: Crafted from forged aluminum alloy and other high-strength materials, CP-Carrillo pistons ensure reduced weight for enhanced engine responsiveness and acceleration. Advanced Engineering: Employing state-of-the-art technology and engineering expertise, CP-Carrillo creates pistons that optimize combustion, boost fuel efficiency, and increase overall power output. Wide Configuration Range: Tailoring to diverse engine builds and performance goals, CP-Carrillo provides a range of bore sizes and compression ratios for customization. Quality Construction: Each CP-Carrillo piston undergoes precision machining, rigorous testing, and meticulous development, guaranteeing consistent quality and high performance. CP-Carrillo pistons stand as the superior choice for any B58 engine application, be it a street-driven powerhouse or a track-dominating machine. Engineered by one of motorsport's most esteemed names, these pistons elevate performance and reliability. The piston sets include Pistons, Rings, Pins, Locks, and a Spec Sheet. Optional Extras: Skirt Coating - Adding a Protective Layer Between the Sides of the Piston and Cylinder Walls Dome Coating - Adding a Protective Layer to the Top of The Piston HD-Wrist Pins - A Must if You are Planning on Going Beyond 850 HP! X Forging - Reducing Rotational Mass By Moving the Wristpin Inwards and Shortening it While Increasing Overall Strength

Show More Show Less

BMW Timing Case Shaft Seal

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:15213988

Part#: 11147797490

Back Ordered

$ 23.99

This product was last offered at the strikethrough price on
05-08-2026

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Prevent oil leaks by replacing your timing case output shaft seal! Help maximize your engine's performance and rigidity.

Spark Plug - Priced Each

Only applicable for vehicles up to 2019 model year

T#:637736

Part#: 12120040551

Back Ordered

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Cometic Head Gasket - BMW N63/S63 - 0.04" Thick

T#:31755177

Part#: C15475-040

Back Ordered

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

OEM Rein Turbocharger Installation Kit - BMW Gen1 B46/B48 2.0L ...

For vehicles with the early Gen1 B46/B48 engine only - Not for TU engines

T#:45791766

Part#: TRK0020

Back Ordered

$ 347.99 USD

Add to Wish List

Qty

$ 347.99 USD

Add to Wish List

When replacing your turbo, it is a good idea to replace the associated coolant lines, oil lines, gaskets, and hardware. Rein has made this easy with their Turbocharger Mounting kit

Vaico Cylinder Head Valve Cover - BMW B46 B48 2.0L

For models with a production date from 01/2020+

T#:46753542

Part#: 11129452895

Special Order: No Guaranteed ETA

$ 522.99 USD

Add to Wish List

Qty

$ 522.99 USD

Add to Wish List

Valve covers can crack or warp over time, leading to vacuum and oil leaks. This can cause check engine lights, a rough idle, and can make a mess, often covering the attached engine accessories in oil. If your valve cover has cracked or warped, we recommend replacing it with this aftermarket valve cover assembly. This replacement valve cover comes with new gaskets, BMW p/n 11129797205 and 11127617411, and new mounting hardware to attach the valve cover to the cylinder head.

Show More Show Less

Rein Coolant Line - Turbocharger Supply Line

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:17704855

Part#: 11538485156

Back Ordered

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Rein turbo hoses are resistant to excessive heat, and oil factors that break down rubber and cause premature failures.

4MM Silicone Vacuum Hose - Black - 9 Feet

T#:370919

Part#: VC04B

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

BMW/Toyota B58B30 JE Pistons - Single

T#:33846582

Part#: 371718S

Back Ordered

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

JE Pistons BMW B48 2.0T - 82.00MM/-17.4CC

T#:33746542

Part#: 384912

Back Ordered

$ 924.99 USD

Add to Wish List

Qty

$ 924.99 USD

Add to Wish List

JE Pistons for BMW B48 2.0T - 82.00MM Bore, -17.4CC Dish Volume

High-Boost Forged Pistons for Your BMW B48 2.0T

JE Pistons delivers ultimate performance and durability with these forged pistons for the BMW B48 2.0T engine. Designed for high-boost and turbocharged setups, these pistons are engineered to handle extreme power and high cylinder pressures, making them ideal for performance tuning enthusiasts.

Engine Compatibility: Fits the BMW B48 2.0T engine found in models such as the BMW 3-Series, X1, X2, and Mini Cooper S/JCW.
Bore Size: 82.00mm for precise cylinder fitment and optimal sealing, ensuring maximum power and reliability.
Dish Volume: -17.4cc dish, engineered to lower the compression ratio, providing more room for forced induction setups to maximize boost pressure without detonation.
Forged 2618 Aluminum: These pistons are forged from aerospace-grade 2618 aluminum, offering exceptional strength and resistance to heat and stress, making them perfect for high-performance and race applications.
Lower Compression Ratio: The lowered compression ratio allows for safer tuning and improved performance in turbocharged builds, especially when running high boost.
Thermal Coating: JE’s advanced thermal coatings protect the piston from heat, reducing friction and ensuring longer service life in demanding conditions.
Lightweight Construction: Reduced reciprocating mass allows for quicker engine revs and improved throttle response, enhancing overall engine performance.
Boost-Ready Design: Built specifically for high-power turbocharged applications, these pistons help manage increased combustion pressures and improve combustion efficiency.
Pre-Balanced and Pin-Fitted: Balanced and pin-fitted for easy installation and improved durability under high-RPM and high-boost conditions.

Boost Your B48 to the Next Level

Show More Show Less

Rein Engine Oil Pan - xDrive - BMW G01 G02 G2X G42 G45 G30 G60 B48 2...

T#:50311432

Part#: 11138580124

Ships in 3 Business Days

$ 435.99 USD

Add to Wish List

Qty

$ 435.99 USD

Add to Wish List

Replace your damaged oil pan and restore safe, leak-free operation with this Rein OEM-quality oil pan, BMW part number 11138580124. Oil pans sit low and take the abuse—especially on lowered cars—making them one of the most commonly damaged components underneath your BMW. A cracked or bent pan isn’t something to gamble with when engine lubrication is on the line. Manufactured by Rein, this pan is built to OEM specifications for proper fit, sealing, and long-term durability. It’s a direct replacement designed to bolt in just like the factory unit, making it an ideal solution when road debris or speed bumps strike first.

Show More Show Less

JE Piston BMW/TOYOTA B58B30

T#:33746539

Part#: 371720

Back Ordered

$ 1,324.99 USD

Add to Wish List

Qty

$ 1,324.99 USD

Add to Wish List

JE Pistons for BMW/TOYOTA B58B30 - 3.268" Bore, .866" Pin, -12.3CC Dish

Precision-Forged Performance for BMW and Toyota B58 Engines

Unlock the full potential of your BMW B58B30 or Toyota B58 engine with JE’s forged piston set, designed to provide durability, lower compression, and efficiency for turbocharged or high-performance builds. Whether you’re aiming for street performance or track dominance, these pistons offer the strength and reliability needed for modern forced induction engines.

Engine Compatibility: Fits both BMW B58B30 and Toyota B58 engines, making it ideal for vehicles like the Toyota Supra (A90) and BMW models such as the G29 Z4 and G20 3-Series.
Bore Size: 3.268" (83mm) bore for precise fitment, ensuring optimal sealing and performance in high-horsepower applications.
Pin Diameter: 0.866" (22mm) wrist pin for secure and reliable piston-rod engagement, even under extreme stress.
Dish Volume: -12.3cc, providing a lower compression ratio for boosted applications, perfect for turbo setups aiming for high power with reduced knock potential.
2618 Forged Aluminum Alloy: Manufactured from high-strength 2618 aluminum, renowned for its durability, heat resistance, and ability to withstand the intense conditions of high-performance engines.
Compression Control for Forced Induction: The -12.3cc dish volume is engineered for lower compression, allowing for safe tuning under high boost pressure while maintaining reliability.
Thermal Coating: Advanced coatings minimize heat absorption, improving durability under intense engine loads and extending piston life.
Lightweight Design: Optimized for reduced mass, these pistons improve throttle response and rev speed without sacrificing strength or endurance.
Track-Tested Performance: Designed and tested for both street and competition use, ensuring that you get race-level performance in your everyday build.

Built for Boosted Power and Reliability

Show More Show Less

9,5x1,8 / FPM RD, Sh 70

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:15015285

Part#: 11537610049

Back Ordered

$ 3.99

This product was last offered at the strikethrough price on
05-07-2026

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Turbo Oil Pipe O-Ring

18" Flexible Magnetic Pickup Tool

T#:641342

Part#: 1711D

Back Ordered

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

Engine Conversion Gasket Set

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:14982184

Part#: 11112250202

Back Ordered

$ 157.99

This product was last offered at the strikethrough price on
05-08-2026

$ 153.99 USD

Add to Wish List

Qty

$ 153.99 USD

Add to Wish List

The factory-correct solution for sealing the crankcase and lower block assembly of your twin-turbo V8.

G30 M550i Experience Package

Call In Or Chat For Best Price!

T#:30197946

Part#: G30-M550I-E-BA

Back Ordered

Sale - Save 10% $ 5,799.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,219.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 5,799.99

This product was last offered at the strikethrough price on
07-31-2026

$ 5,219.96 USD

Add to Wish List

Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go-to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power adders, the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience. Includes Dinan Exhaust Dinan Intake Dinan Adjustable Lowering Springs Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +19 HP and +18 lb-ft of torque (Exhaust + Intake) Smoother, louder, and sportier sound (Exhaust + X-Pipe) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonators between the catalysts and rear muffler for increased volume (X-Pipe) Reduced intake restriction for greater flow allowing increased turbo efficiency and greater power potential on modified builds (Intake) Improved throttle response (Intake) Vehicle lowered 3/4" in the front and rear while retaining factory-like ride comfort (Springs + Bumpstops) Substantial reduction in body roll for improved handling and performance (Springs + Bumpstops) Elevated and stylish high-performance look to the interior (Pedal Pads) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge

Show More Show Less

Lower Timing Chain Tensioner

T#:5175686

Part#: 13527797905

Back Ordered

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

The guide rails in your timing set keep everything tracking properly. Because it is made out of a plastic-like material, years of abrasion can wear parts of it away. This can cause the chain can to become slightly loose and cause a chain 'slap' or rattle noise. Replace your damaged timing chain tensioner and guide rails to keep timing chain noise to a minimum. Located on the outside of the timing chain guide that keeps tension on the chain.

Show More Show Less

Engine Mount

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:16441629

Part#: 22116860487

Ships in 1 Business Day

$ 65.99 USD

Add to Wish List

Qty

$ 65.99 USD

Add to Wish List

With exposure to heat and elements, your motor mounts will break down with increasing age. A secure mount is vital to reduce drivetrain vibration and transfer as much horsepower to the wheels as possible.

Show More Show Less

BMW B48 2.0T JE Pistons

T#:33746564

Part#: 384915

Back Ordered

$ 924.99 USD

Add to Wish List

Qty

$ 924.99 USD

Add to Wish List

Here’s another description for the JE Pistons for BMW B48 2.0T with 83.00MM / -12.3CC specs, focusing on a more dynamic and performance-driven tone:

JE Pistons for BMW B48 2.0T - 83.00MM Bore, -12.3CC Dish Volume

Maximize Your BMW B48 2.0T's Power Potential

Unlock serious performance gains with JE’s forged pistons for the BMW B48 2.0T engine. These pistons are engineered to withstand the rigors of high-boost, turbocharged applications, offering the strength, precision, and durability needed for extreme power builds.

Engine Compatibility: Designed to fit the BMW B48 2.0T engine, common in models like the BMW 3-Series (G20), 4-Series, and MINI Cooper S/JCW.
Bore Size: Featuring an 83.00MM bore, these pistons offer a perfect fit for increased displacement, improving engine efficiency and power output.
Dish Volume: The -12.3CC dish helps lower compression, providing more room for increased boost pressure without compromising safety or risking detonation. Perfect for high-boost turbocharged setups.
High-Strength Forged 2618 Aluminum: Built using aerospace-grade 2618 forged aluminum, these pistons deliver unmatched durability and heat resistance, making them ideal for racing or high-performance street builds.
Turbo-Ready Design: Optimized for forced induction, the -12.3CC dish enhances airflow and combustion efficiency, allowing you to push more power safely while maintaining reliability.
Advanced Thermal Coating: JE’s proprietary thermal coatings reduce friction and heat absorption, ensuring longevity and consistent performance, even in extreme conditions.
Lightweight Performance: Engineered to minimize weight, these pistons improve engine response and revving capabilities, resulting in a faster, more agile driving experience.
Pre-Fitted and Balanced: Delivered pre-fitted with wrist pins and balanced for easy installation, these pistons ensure your engine runs smoothly and efficiently from the moment they’re installed.

Built to Handle Extreme Boost

These JE Pistons are the ultimate upgrade for anyone looking to take their BMW B48 2.0T to the next level. With a design tailored to withstand high-pressure turbo setups and extreme performance demands, they provide the confidence and reliability needed to extract every ounce of power from your engine. Perfect for racers and performance enthusiasts alike.

Show More Show Less

BMW Valve Stem Gasket Set

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:14982202

Part#: 11340038720

Back Ordered

$ 35.99

This product was last offered at the strikethrough price on
05-08-2026

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Replace your old valve stem seals with these new ones!

5150 AutoSport Pro-Series Turbo Build Kit, BMW / Toyota B58 ...

T#:35761662

Part#: 5150-TBK-B58-G2-

Back Ordered

$ 5,149.99 USD

Add to Wish List

Qty

$ 5,149.99 USD

Add to Wish List

Turbocharger Inlet Clamp - Exhaust Manifold To Turbocharger ...

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:17704691

Part#: 11657620507

In Stock

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

JE Pistons BMW B48 2.0T - 82.00MM/-11.1CC

T#:33746562

Part#: 384914

Back Ordered

$ 924.99 USD

Add to Wish List

Qty

$ 924.99 USD

Add to Wish List

JE Pistons for BMW B48 2.0T - 82.00MM Bore, -11.1CC Dish Volume

Enhance Your BMW B48 2.0T Performance with JE Forged Pistons

Unlock the true potential of your BMW B48 2.0T engine with the exceptional quality of JE Pistons. These forged pistons are meticulously designed for high-performance applications, ensuring that you can maximize power and efficiency while maintaining reliability in demanding conditions.

Engine Compatibility: Tailored for the BMW B48 2.0T engine, this piston set fits seamlessly into popular models such as the BMW 3-Series (G20), X1, and MINI Cooper S, making them the perfect choice for performance upgrades.
Bore Size: With a bore diameter of 82.00MM, these pistons provide an optimal fit for improved sealing and enhanced engine performance.
Dish Volume: The -11.1CC dish design lowers the compression ratio, making these pistons ideal for turbocharged setups where higher boost levels are required without the risk of knock.
High-Strength Forged 2618 Aluminum: Crafted from durable 2618 aluminum, these pistons are engineered to handle extreme heat and pressure, providing peace of mind during high-performance driving.
Turbo-Optimized for Power: The -11.1CC dish allows for greater airflow and combustion efficiency, enabling aggressive tuning and substantial power gains while maintaining engine safety.
Advanced Thermal Coating: Each piston features a specialized thermal barrier coating to minimize heat absorption, reducing wear and prolonging the life of the piston in high-stress situations.
Lightweight Design: Engineered to reduce weight, these pistons enhance throttle response and rev capabilities, allowing for a more engaging driving experience.
Pre-Fitted and Balanced: Ready for easy installation, each piston is pre-fitted with wrist pins and balanced to ensure smooth operation, allowing you to enjoy your performance upgrade right away.

Built for Performance Enthusiasts

Whether you're a weekend warrior on the track or looking to enhance your daily driver, these JE Pistons provide the performance and reliability needed for high-boost applications. Experience improved throttle response, increased horsepower, and the satisfaction of pushing your BMW B48 2.0T engine to its limits with confidence.

Show More Show Less

CP Piston & Ring Set - Set Of 4

T#:29267504

Part#: SC7705-4

Back Ordered

$ 958.99 USD

Add to Wish List

Qty

$ 958.99 USD

Add to Wish List

Vaico Engine Oil Pan - xDrive - BMW G01 G02 G2X G42 G45 G30 G60 B48 ...

T#:53608845

Part#: 11138580124

Special Order: No Guaranteed ETA

$ 780.99 USD

Add to Wish List

Qty

$ 780.99 USD

Add to Wish List

Oil pans sit low and can take some abuse, especially on lowered cars, making them among the most commonly damaged components beneath your BMW. A cracked or bent pan isn’t something to gamble with when engine lubrication is at stake. This pan is built to OEM specifications for proper fit, sealing, and long-term durability. It’s a direct replacement designed to bolt in just like the factory unit, making it an ideal solution when road debris or speed bumps strike first.

Show More Show Less

JE Pistons BMW - A90 Supra ULTRA SERIES B58

T#:33612886

Part#: 389617

Back Ordered

$ 1,722.99 USD

Add to Wish List

Qty

$ 1,722.99 USD

Add to Wish List

The JE Pistons for the B58 engine are high-performance forged pistons designed for BMW's 3.0L inline-six turbocharged engine. These pistons are built with aerospace-grade materials, offering superior strength and durability under extreme conditions. They feature precision-machined surfaces, optimized for high boost applications, reduced friction, and enhanced thermal management. JE Pistons are known for their lightweight design, which improves engine response, while maintaining reliability for both street and track use. Customizable options for compression ratios and coatings are often available to suit specific performance goals.

Show More Show Less

ACL Race Series High Performance Main Bearing Set - BMW B58/S58 ...

T#:34114251

Part#: 7M1512H-STD

Special Order: No Guaranteed ETA

$ 402.99

This product was last offered at the strikethrough price on
02-03-2026

$ 291.99 USD

Add to Wish List

Qty

$ 291.99 USD

Add to Wish List

Introducing the ACL Race Series High-Performance Main Bearing Set, meticulously crafted for BMW B58 and S58 engines. Take your BMW’s engine durability and performance to the next level with these race-proven main bearings, designed to handle the demands of aggressive driving and high-RPM scenarios.

Built with ACL’s Duraglide tri-metal technology, this main bearing set ensures exceptional oil flow and resistance to wear, even in extreme conditions. Engineered for performance, this upgrade is a direct replacement for stock BMW main bearings, providing enhanced strength and longevity without compromising factory tolerances.

Key Features:

Race-proven design: Ideal for performance builds, this complete set delivers superior oiling and heat resistance, making it perfect for high-RPM use. Precision fitment: Engineered specifically for BMW’s B and S series engines, offering a reliable solution for common crankshaft bearing wear issues. Duraglide technology: Featuring tri-metal construction, including a copper-lead base and high-strength overlay, for improved oil retention and reduced friction. High-load capacity: Designed to withstand the rigors of spirited driving and competition, preventing distortion and wear during peak performance. Optimized for high performance: Eliminates tin flash plating, allowing for better bearing-to-housing contact and improved durability under extreme pressure. Whether you're rebuilding your BMW for the track or simply want to ensure reliable performance under demanding conditions, the ACL Race Series Main Bearing Set offers the perfect upgrade solution. Boost your engine’s reliability and extend its lifespan with this high-performance bearing set.

Show More Show Less

Cylinder Head Bolt - Set of 10

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:27171911

Part#: 11128644674

Back Ordered

$ 85.99 USD

Add to Wish List

Qty

$ 85.99 USD

Add to Wish List

Features robust steel construction engineered to handle the high heat and extreme cylinder pressures of turbocharged applications.

ATI Super Damper / Harmonic Balancer - 10% Underdrive - BMW B58A (Ge...

T#:43142743

Part#: 918352

Back Ordered

$ 451.99 USD

Add to Wish List

Qty

$ 451.99 USD

Add to Wish List

This ATI Super Damper is a direct replacement for the OEM Harmonic Balancer, designed to further reduce harmful engine harmonics that could lead to damage to sensitive engine components. The 10% underdrive function of this super damper is designed to increase usable horsepower by reducing parasitic power loss without greatly affecting engine accessories.

Show More Show Less

King GPC Connecting Rod Bearing Set - Standard Size - BMW N63/S63 4....

T#:41863727

Part#: CR8049GPC

In Stock at Vendor

$ 195.99 USD

Add to Wish List

Qty

$ 195.99 USD

Add to Wish List

GPC is King Bearings’ premium silver based tri-metal material for race applications, capable of withstanding 17,000 PSI. This makes it well-suited for Diesel Performance and Sprint Cars. GPC made with polymer coating plays a crucial role in safeguarding the bearings, in scenarios involving oil starvation and metal-to-metal contact. GPC Bearings are commonly used for Diesel Performance & Sprint Cars, which operate under extreme load and long duration. The silver-based composite & polymer coating plays a crucial role in safeguarding the bearings in oil starvation and metal-to-metal contact scenarios.

Show More Show Less

ATI Super Damper / Harmonic Balancer - 21% Underdrive - BMW B58A (Ge...

T#:43142744

Part#: 918351

Back Ordered

$ 418.99 USD

Add to Wish List

Qty

$ 418.99 USD

Add to Wish List

This ATI Super Damper is a direct replacement for the OEM Harmonic Balancer, designed to further reduce harmful engine harmonics that could lead to damage to sensitive engine components. The 21% underdrive function of this super damper is designed to greatly increase usable horsepower for racing applications by driving engine accessories slower, reducing overall parasitic power loss.

Show More Show Less

Gates Oil Return Pipe - Cylinders 1-4 - N63 4.4L

T#:11268518

Part#: 11429454094

Back Ordered

$ 253.99

This product was last offered at the strikethrough price on
04-17-2026

$ 206.99 USD

Add to Wish List

Qty

$ 206.99 USD

Add to Wish List

This hard oil line keeps your turbocharger lubricated and functioning as it should. Replace your leaking line to prevent turbocharger damage. Genuine BMW Return Pipe - Zyl. 1-4 This item fits the following BMW Chassis: E71,F01,F02,F06,F10,F12,F13,F15,F16 Fits BMW Engines including: N63,N63N

Show More Show Less

Complete Timing Chain Kit

T#:56291013

Part#: 11318570649S8

Special Order: No Guaranteed ETA

$ 435.99 USD

Add to Wish List

Qty

$ 435.99 USD

Add to Wish List

This Febi Bilstein Master Timing Chain Kit is an exact OE-grade solution engineered specifically to meet or exceed strict original equipment standards.

Engine Mount - Left

T#:56110320

Part#: 22116860495

Special Order: No Guaranteed ETA

$ 106.99 USD

Add to Wish List

Qty

$ 106.99 USD

Add to Wish List

Maintain the performance of your BMW chassis by replacing a worn, collapsing left-side engine mount with this premium replacement from Febi Bilstein.

B58 BMW JE Pistons ULTRA SERIES B58B30/3.2284

T#:33612887

Part#: 389618

Back Ordered

$ 1,722.99 USD

Add to Wish List

Qty

$ 1,722.99 USD

Add to Wish List

The JE Pistons for the B58 engine are high-performance forged pistons designed for BMW's 3.0L inline-six turbocharged engine. These pistons are built with aerospace-grade materials, offering superior strength and durability under extreme conditions. They feature precision-machined surfaces, optimized for high boost applications, reduced friction, and enhanced thermal management. JE Pistons are known for their lightweight design, which improves engine response, while maintaining reliability for both street and track use. Customizable options for compression ratios and coatings are often available to suit specific performance goals.

Show More Show Less

Engine Mount - Right

T#:56110321

Part#: 22116860496

Special Order: No Guaranteed ETA

$ 113.99 USD

Add to Wish List

Qty

$ 113.99 USD

Add to Wish List

Keep your BMW's chassis tight and secure with this direct-replacement right-side hydraulic engine mount from Febi Bilstein.

Valve Cover With Vent Valve And Gasket

T#:56291030

Part#: 11127645173

Special Order: No Guaranteed ETA

$ 218.99 USD

Add to Wish List

Qty

$ 218.99 USD

Add to Wish List

Maintain peak engine integrity and stop unwanted oil leaks with this replacement valve cover assembly from Febi Bilstein.

Gates Oil Return Pipe - Cylinders 5-8 - N63 4.4L

T#:11268519

Part#: 11429454095

Back Ordered

$ 276.11

This product was last offered at the strikethrough price on
04-20-2026

$ 231.69 USD

Add to Wish List

Qty

$ 231.69 USD

Add to Wish List

Part of your turbocharger's oiling system. This hard oil line keeps your turbocharger lubricated and functioning as it should. Replace your leaking line to prevent turbocharger damage. Genuine BMW Return Pipe - Zyl. 5-8 Fits BMW Engines including: N63,N63N

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 5 Series G30 (2017+)

Sub-Categories

JE Pistons for BMW B48 2.0T - 83.00MM Bore, -18.7CC Dish Volume

JE Pistons for BMW B48 2.0T - 82.00MM Bore, -17.4CC Dish Volume

JE Pistons for BMW/TOYOTA B58B30 - 3.268" Bore, .866" Pin, -12.3CC Dish

JE Pistons for BMW B48 2.0T - 83.00MM Bore, -12.3CC Dish Volume

JE Pistons for BMW B48 2.0T - 82.00MM Bore, -11.1CC Dish Volume

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results