FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58 (RED) ...

For Gen1 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3047551

Part#: SG71391-R

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

BMW Air Filter - 13718699812

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:47096351

Part#: 13718699812

Special Order: No Guaranteed ETA

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Keep your engine breathing freely with a new air filter—one of the easiest and most effective maintenance steps you can take. As your old filter fills with dust, dirt, and road debris, airflow becomes restricted, forcing the engine to work harder than it should. This leads to sluggish throttle response, lower efficiency, and reduced overall performance. Installing a fresh air filter brings back proper airflow, supports clean combustion, and keeps your engine running smooth and responsive. It’s a simple, budget-friendly way to protect your motor, enhance drivability, and keep your BMW performing exactly as designed.

Show More Show Less

3" To 2.5" Silicone Coupler 3" Length

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:363896

Part#: 003402ECS04A-02

Ships on Sep 8, 2026

Sale - Save 10% $ 9.99

This product was last offered at the strikethrough price on
06-13-2026

$ 8.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 9.99

This product was last offered at the strikethrough price on
06-13-2026

$ 8.99 USD

Add to Wish List

3" To 2.5" Silicone Coupler 3" Length

Enhance the performance and durability of your BMW or MINI with the 3" To 2.5" Silicone Coupler 3" Length. This silicone coupler provides a reliable connection between components, ensuring optimal airflow and reducing the risk of leaks. Engineered for durability and heat resistance, it withstands high temperatures and harsh conditions. Upgrade your BMW or MINI with this premium silicone coupler for improved performance.

Reliable connection for optimal airflow
Reduces the risk of leaks for enhanced performance
Engineered for durability and heat resistance
Fits both BMW and MINI models

Show More Show Less

BMW Air Filter - 13718699811

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:47096356

Part#: 13718699811

Special Order: No Guaranteed ETA

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Keep your engine breathing freely with a new air filter—one of the easiest and most effective maintenance steps you can take. As your old filter fills with dust, dirt, and road debris, airflow becomes restricted, forcing the engine to work harder than it should. This leads to sluggish throttle response, lower efficiency, and reduced overall performance. Installing a fresh air filter brings back proper airflow, supports clean combustion, and keeps your engine running smooth and responsive. It’s a simple, budget-friendly way to protect your motor, enhance drivability, and keep your BMW performing exactly as designed.

Show More Show Less

Febi Intake Air Filter - BMW G05 G06 G07 G12 G14/15/16 G30 G32 B58 3...

For models with a production date up to 01/2017 For models with the earlier B46 engine - not compatible with the later B46D (B46TU) engine For models with the earlier B58 engine - not compatible with the later B58C or B58D (B5...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:39126841

Part#: 13718577170

Special Order: No Guaranteed ETA

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Dirty air filters can prevent air from getting to your engine, causing poor performance and low power. Luckily, this is a quick and easy fix! Just pop open your intake airbox, pull out the old filter, insert your brand new filter, and button everything back up. Once you start and drive your car, you'll immediately be able to feel a difference!

Show More Show Less

OEM Febi Swirl Flap Adjustment Motor - BMW G30 540d

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:38452816

Part#: 11617804744

Special Order: No Guaranteed ETA

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

This electric adjustment motor attaches to the front of the intake manifold, directly beside the venturi intake pipe, and adjusts the internal swirl flaps that help mix exhaust gases with fresh intake air.

Show More Show Less

Intake Gasket Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:54995058

Part#: 11617547242

Ships on Oct 23, 2026

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Intake Manifold

For vehicles with the earlier B46/B48 Gen1 Engine - Not compatible with the B46/B48 Gen...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:53079377

Part#: 11618603914

Ships on Sep 8, 2026

Sale - Save 15% $ 545.99

This product was last offered at the strikethrough price on
05-03-2026

$ 464.09 USD

Add to Wish List

Qty

Sale - Save 15%

$ 545.99

This product was last offered at the strikethrough price on
05-03-2026

$ 464.09 USD

Add to Wish List

Crank Case Ventilation Valve - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:53326230

Part#: 11158647299

Ships on Sep 8, 2026

Sale - Save 20% $ 80.99

This product was last offered at the strikethrough price on
05-03-2026

$ 64.79 USD

Add to Wish List

Qty

Sale - Save 20%

$ 80.99

This product was last offered at the strikethrough price on
05-03-2026

$ 64.79 USD

Add to Wish List

BMW Gen 1 B58 Charge Air Cooler Manifold - Custom Finish - Thermal Bl...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:42840098

Part#: 8300C

Back Ordered

$ 4,295.00 USD

Add to Wish List

Qty

$ 4,295.00 USD

Add to Wish List

G30 M550i Experience Package

Call In Or Chat For Best Price! affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:30197946

Part#: G30-M550I-E-BA

Ships on Jul 31, 2026

9% off MSRP $ 6,379.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,799.99 USD

Add to Wish List

Qty

9% off MSRP

$ 6,379.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 5,799.99 USD

Add to Wish List

Going beyond its Foundation counterpart, the Dinan Experience packages address not only the engine but also the chassis for a complete solution in the form of a wholly tuned Dinan vehicle. While adding power modifiers is often the go-to path when beginning the modification journey, it does not fully consider what makes the car infinitely more enjoyable in scenarios outside of WOT pulls. With the addition of suspension upgrades integrated alongside the power adders, the vehicle is transformed into something more than just the sum of its parts. It's a comprehensive answer to delivering additional technical capabilities in the form of increased engine performance and better handling along with improvements to aesthetics (looks and sound) in a package designed with reliability and safety in mind. This union of power and handling modifications results in a true OEM+ experience - the Dinan Experience. Includes Dinan Exhaust Dinan Intake Dinan Adjustable Lowering Springs Dinan Badge Features Smiles per gallon instantly multiplied Guaranteed component compatibility and seamless integration 10% price savings when compared to buying the same components a la carte Maximum gains of +19 HP and +18 lb-ft of torque (Exhaust + Intake) Smoother, louder, and sportier sound (Exhaust + X-Pipe) Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions (Exhaust) Deletes resonators between the catalysts and rear muffler for increased volume (X-Pipe) Reduced intake restriction for greater flow allowing increased turbo efficiency and greater power potential on modified builds (Intake) Improved throttle response (Intake) Vehicle lowered 3/4" in the front and rear while retaining factory-like ride comfort (Springs + Bumpstops) Substantial reduction in body roll for improved handling and performance (Springs + Bumpstops) Elevated and stylish high-performance look to the interior (Pedal Pads) Every Experience Package instantly qualifies for the Fabled Dinan deck lid badge

Show More Show Less

CSF High Performance Charge Air Cooer Manifold - Thermal Black Finish...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:27138574

Part#: 8300B

Back Ordered

$ 4,295.00 USD

Add to Wish List

Qty

$ 4,295.00 USD

Add to Wish List

CSF has had tremendous success with its Gen 2 B58 “Super Manifold” for G-Chassis BMW and Supra with over 450 units sold and counting (CSF #8200/8200B/8200C). Due to its industry-leading design and proven performance, CSF has received countless requests to engineer its “Super Manifold” for the Gen 1 B58 F-Chassis BMW platform. Finally, the wait is over for Gen 1 B58 customers! The “Super Manifold” is now available for your BMW. You no longer have to settle for a lower-quality product. The Gen 1 B58 Charge-Air-Cooler Manifold has all the same features and specs as the lasted version of the CSF Gen 2 manifold. This also includes some additional improvements for a better fit and finish over the competition. Utilizes a High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core Double the Capacity of the OEM Core (12 Rows of Water Cooling vs. OEM 6 Rows) Significantly Lower Pressure Drop Across the Core Compared to OEM Designed in SolidWorks Using Computational Fluid Dynamics (CFD) Integrated Air Divider in Inlet Tank Evenly Distributes Airflow Throughout the Core Improved slotted mounting holes on throttle body side for easier installation. Easy Access to Spin-Off Oil Filter for Quick Oil Changes – No Need to Uninstall Manifold Every Oil Change Counter Balanced Design for Optimized Airflow Integrated Sensor Pad with Three 1/8' NPT Ports to Measure Additional Parameters Included Optional Fuel Rail for Top Feed Port Injection Individual Port Injection Bungs on Each Cylinder Runner (Comes Pre-Plugged) Individual 1/8' NPT Ports on the Top of Each Cylinder Runner for Nitrous or Meth Injection Allows for Even Spray Distribution and Control for Maximum Performance and Engine Protection Individual 1/8' NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Air-Bleeding of the System Included KIYLEX Thermal Rejection Manifold Spacer* Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Plug-and-Play design, Requiring No Modifications to Install Includes Hardware and Installation Kit with Picture Diagrams Containing 32 Different Parts for Easy Installation In development of the Charge-Air-Cooler Manifold for the Gen 2 B58, CSF conducted extensive testing on the dyno with R&D partner VF Engineering. This consisted of over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle. This in-depth and thorough testing sets CSF apart from the competition. Because the CSF #8300 is the same overall design as the CSF #8200 with some small design adjustments to fit the Gen 1 B58, there is no question that it will perform. The Gen 2 B58 “Super Manifold” (CSF #8200) has been real-world tested and proven in some of the most extreme motorsport competitions around the world. It has stood up to the rigors of the Pikes Peak International Hill Climb, Global Time Attack competitions, and Texas 2K drag racing, just to name a few. In addition, it has also been dyno-proven on many vehicles pushing over 1000 whp. While there are countless features and details to show just how superior the CSF Manifold is, real-world examples speak louder than words. Disclaimer: CSF pressure tests each #8300 manifold at 60-70 PSI for a period of 2-3 minutes during the Quality Control and Inspection process. The CSF manifold is not designed to operate above 60 PSI. Any users who chose to operate their vehicle with the CSF manifold over 60 PSI does so at their own risk. Operation at these pressure levels will void the CSF Limited 2 Year Warranty.

Show More Show Less

Ajusa Intake Manifold Gasket - BMW N52 N54 N55 N63

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:45963169

Part#: 24030200

Back Ordered

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

This intake gasket goes between the cylinder head and the intake runners and should be replaced anytime the intake manifold is removed from the engine.

4MM Silicone Vacuum Hose - Blue - 9 Feet

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:370917

Part#: VC04

In Stock

Sale - Save 10% $ 14.99

This product was last offered at the strikethrough price on
07-01-2026

$ 13.46 USD

Add to Wish List

Qty

Sale - Save 10%

$ 14.99

This product was last offered at the strikethrough price on
07-01-2026

$ 13.46 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

4MM Silicone Vacuum Hose - Black - 9 Feet

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:370919

Part#: VC04B

In Stock

Sale - Save 10% $ 14.99

This product was last offered at the strikethrough price on
07-01-2026

$ 13.46 USD

Add to Wish List

Qty

Sale - Save 10%

$ 14.99

This product was last offered at the strikethrough price on
07-01-2026

$ 13.46 USD

Add to Wish List

Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter.

3MM Silicone Vacuum Hose - Red - 9 Feet

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:370915

Part#: VC03R

Back Ordered

Sale - Save 10% $ 14.99

This product was last offered at the strikethrough price on
07-01-2026

$ 13.46 USD

Add to Wish List

Qty

Sale - Save 10%

$ 14.99

This product was last offered at the strikethrough price on
07-01-2026

$ 13.46 USD

Add to Wish List

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Upgrade your BMW's vacuum system with the Forge 3MM Silicone Vacuum Hose in Red, a high-quality solution designed for optimal performance and durability. This 9-foot silicone vacuum hose provides superior flexibility and resistance to extreme temperatures, making it ideal for various automotive applications. Engineered with precision, it ensures reliable vacuum pressure for efficient engine operation and component functionality. Whether you're replacing worn-out hoses or customizing your BMW's vacuum setup, the Forge Silicone Vacuum Hose offers reliability and performance you can trust.

High-quality silicone construction for durability
Superior flexibility for easy installation
Resistant to extreme temperatures
Ensures reliable vacuum pressure for efficient engine operation
Ideal for various automotive applications

Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter.

Show More Show Less

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558165

Part#: 1G-MT-CL

Ships in 5 Business Days

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Boost Cooler Forced Induction Progressive Engine Mount Water-Methanol...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641833

Part#: SNO-20010

In Stock

$ 520.99 USD

Add to Wish List

Qty

$ 520.99 USD

Add to Wish List

Keep BMW boost temperatures in check with the Snow Performance Stage 2 Boost Cooler water methanol injection kit, suitable for all forced induction applications (Supercharged/Turbocharged). This kit enhances performance and cooling, especially beneficial for direct-injected engines, effectively removing carbon build-up on valves.

Suitable for all forced induction applications (Supercharged/Turbocharged)
Simple handheld display for easy injection point adjustment
VC-30 progressive controller with digital display and MAP sensor for precise injection
Adjustable start and full points for optimal engagement
Proportional injection based on boost pressure for accurate delivery
Improves drivability and provides cooling benefits
Recommended for street/strip driven gas forced induction vehicles
OEM approved water methanol injection pump with proprietary heat flange
Extreme Environment 300 PSI UHO pump for durability in elements
100% methanol resistant components for longevity
ACU-SEAL compression fittings for leak-free operation
Increases induction charge density for enhanced performance
Made in the U.S.A. and supports 1,000+ HP

Show More Show Less

#4 Water Methanol Nozzle - 4 GPH

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:13957879

Part#: SNO-N0400

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Snow Performance Water Methanol Injection Nozzle - 8GPH

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:17040324

Part#: SNO-N0800

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

AEM V3 Water/Methanol Injector Kit (Qty 2)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815166

Part#: 30-3313

In Stock

12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

Qty

12% off MSRP

$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD

Add to Wish List

AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.

Show More Show Less

SnowPerformance Stage 2.5 Boost-Controlled Water/Meth Injection Kit -...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:380988

Part#: SNO210

In Stock

$ 583.99 USD

Add to Wish List

Qty

$ 583.99 USD

Add to Wish List

The Snow Performance Stage 2 Boost Cooler is the most advanced gauge style water-meth system on the market. This kit includes a boost referenced VC-50 controller, the Stage 2 has the ability to progressively command 2 Hyper-Sonic Nozzles on an independent basis.

Show More Show Less

High Flow Water-Methanol Solenoid Upgrade - Quick-Connect Fittings ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598937

Part#: SNO-40060

In Stock

$ 73.00 USD

Add to Wish List

Qty

$ 73.00 USD

Add to Wish List

Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: Robust Methanol Resistant Stainless Steel/Zinc Design High PSI Solenoid Designed to Be Used Between Pump & Injection Point Two Brackets Mounted To Solenoid For Easy Install Pigtail Harnessed Wiring Connections Easy to Read "Flow" Indication 2 Quick Connect Fittings To 1/4" High Temp Nylon Tubing Large 3/16" Orifice For Maximum Flow Through System

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

Water/Methanol Nozzle - 6GPH

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374127

Part#: SNO-N0600

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

AEM V3 Universal Water/Methanol Injection Kit (30-3300)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:369781

Part#: 30-3000

In Stock

11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Qty

11% off MSRP

$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD

Add to Wish List

Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing

Show More Show Less

N1000 - Snow Performance Water Injection Nozzle

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2317846

Part#: SNO-N1000

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

2 Gallon Low Profile Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

Red High Temp Nylon Tubing - 20ft

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:640586

Part#: SNO-8087

In Stock at Vendor

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Low Profile Water-Methanol Nozzle Holder 4AN 90* Elbow

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:640584

Part#: SNO-809-BRD

In Stock

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

High Flow Water Methanol Check Valve

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2317849

Part#: SNO-8CV-QC

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Water-Methanol Dual Nozzle Upgrade - Quick-Connect Fittings

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598936

Part#: SNO-40040

In Stock

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

B58 Billet Water Injection Spacer - Gen1 B58 (B58A)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:15744064

Part#: GEN1B58WIS

Ships on Jul 23, 2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Plug-and-play water injection adapter for all Gen1 B58 BMW motors Normally you'd replace the factory charge pipe to install a water/meth kit but in the case of the B58 engine, the factory charge pipe is very sturdy and difficult to remove. So we've designed this plug-and-play adapter for quick installation and removal of BMS dual nozzle water/meth kits without having to replace the factory charge pipe. Simply unscrew three bolts, insert the CNC machined adapter with integrated o-ring in place, and tighten the included longer length bolts, to allow mounting of two meth nozzles with a perfect seal. Includes dual 1/8" NPT methanol bungs appropriately machined for a clean spray pattern which is critical for proper atomization with the B58 motor. For most B58 water/meth applications we suggest dual CM5 nozzles. What's Included: (Gen 1 B58) (1) Billet Spacer (3) M6x1.0x50mm bolts (2) 1/8 NPT bung plugs (2) 90º nozzle adapters

Show More Show Less

Water Methanol Controller (Boost) - VC-30

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308475

Part#: SNO-60400

In Stock

$ 184.99 USD

Add to Wish List

Qty

$ 184.99 USD

Add to Wish List

Water Methanol Controller (Boost) - VC-30 is a sophisticated progressive controller that includes a digital display and boost sensor for precise water/methanol injection. Designed for BMW vehicles, this controller adjusts the injection rate based on boost pressure, ensuring optimal performance and cooling.

Precision Injection: The VC-30 proportionally injects water/methanol based on boost pressure, providing accurate delivery for cooling and performance improvements.
Adjustable Settings: Features adjustable start and full points for customizable engagement and delivery curves to meet engine requirements.
Enhanced Cooling: Improves drivability and cooling benefits across a wide range, making it especially beneficial for direct-injected engines.
Carbon Build-Up Reduction: Effectively removes 100% of carbon build-up on valves, enhancing engine longevity and performance.
Digital Display: Includes a user-friendly digital display for monitoring and adjusting settings.

Show More Show Less

Water/Methanol Nozzle - 1.5GPH

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374121

Part#: SNO-N0150

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol In...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374123

Part#: SNO-211-BRD

In Stock at Vendor

$ 909.99 USD

Add to Wish List

Qty

$ 909.99 USD

Add to Wish List

Hobb's Switch

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:403482

Part#: ACC-HOBBS

Ships on Jul 23, 2026

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

14GPH Water-Methanol Nozzle

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374112

Part#: SNO-N1400

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Snow VC-50 Water Methanol Controller / Boost Gauge (1-50 PSI) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:556344

Part#: 60500

In Stock at Vendor

$ 312.99 USD

Add to Wish List

Qty

$ 312.99 USD

Add to Wish List

Water-Methanol Dual Nozzle Upgrade Stainless Steel Braided Line ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374131

Part#: SNO-40040-BRD

In Stock at Vendor

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:558163

Part#: BMS-WMI

Ships on Jul 23, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Boost Cooler Stage 3 DI ProLine Water Injection

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308464

Part#: SP10317PRO

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

The Snow Performance Stage 3 Boost Cooler brings 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2Dinjection map based off boost and fuel pressure sensor input to deliver an extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. None invasive, the Stage3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25points for maximum HP and cooling . Comes with adjustable Stage 3 water-meth controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle.

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Jul 23, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Snow Performance Stage 3 Boost Cooler (EFI - Port Injection) - Braide...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21374153

Part#: SNO-310-BRD

In Stock at Vendor

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

82040R - Snow Performance Tee Adapter Fitting

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2317847

Part#: SNO-82040R

In Stock at Vendor

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Stage 2 Boost Cooler Forced Induction Progressive Engine Mount Water-...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641841

Part#: 20010-BRD

In Stock at Vendor

$ 625.00 USD

Add to Wish List

Qty

$ 625.00 USD

Add to Wish List

Turner Motorsport presents the Snow Performance Stage 2 Boost Cooler Water Methanol Injection Kit, ideal for all forced induction applications, including supercharged and turbocharged BMWs. With its easy-to-use handheld display screen, this kit allows precise control over injection points and can be conveniently mounted for access. The VC-30 progressive controller adjusts water/methanol injection based on boost pressure, providing accurate delivery for improved drivability and cooling benefits. This kit is recommended for street/strip driven gas forced induction vehicles seeking cooling over a wide range, especially beneficial for direct-injected engines to remove carbon buildup on valves. Key benefits include:

Precise injection control for improved performance
OEM-approved water methanol injection pump for durability
100% methanol-resistant components for long-lasting use
Guaranteed leak-free operation with ACU-SEAL compression fittings
Increases induction charge density and fuel octane levels for full power

Show More Show Less

Snow Performance Water Methanol Injection Nozzle - 7GPH

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:17040323

Part#: SNO-N0700

In Stock at Vendor

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

Constructed out of 100% methanol resistant nickel plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a removable 80 micron filter, the Hyper-Sonic nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today! (1/8" NPT Threads)

Show More Show Less

GAS STAGE 3 DIRECT INJECTION WATER METHANOL CONTROLLER

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:586250

Part#: SNO-60300

Ships in 2 Business Days

$ 416.99 USD

Add to Wish List

Qty

$ 416.99 USD

Add to Wish List

High Flow Water-Methanol Solenoid Upgrade - 4AN Fittings

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21308462

Part#: 40060-BRD

In Stock at Vendor

$ 73.00 USD

Add to Wish List

Qty

$ 73.00 USD

Add to Wish List

Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: 100% Methanol Resistant Stainless Steel Construction Comes with (2) 1/8" NPT to 4AN Fittings & Mounting Hardware Can Be Used With All Snow Performance Water Methanol Injection Kits & Upgrades Highest Flowing Water Methanol Solenoid On The Market U.S.A Made

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW 5 Series G30 (2017+)

Sub-Categories

3" To 2.5" Silicone Coupler 3" Length

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results