BMW Fuel System Parts for BMW G42 M240i xDrive B58 3.0L

Genuine BMW Gas Cap - Most BMWs 2000+

T#:2788

Part#: 16117222391

In Stock

9% off MSRP $ 40.48

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.69 USD

Add to Wish List

Qty

9% off MSRP

$ 40.48

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.69 USD

Add to Wish List

This fuel cap is an original BMW product. A faulty gas cap can often be the cause a fault code and trigger a "check engine" light.

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

Precision Raceworks Ethanol 360 Fittings - 5/16" (7.89mm)

Universal Product - Please confirm your fuel line size prior to ordering

T#:37757295

Part#: 601-0240

Ships in 7 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 5/16" or 7.89mm quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks ...

T#:38161701

Part#: 101-0257

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks is designed for BMW and high-performance fuel systems, ensuring optimal fuel flow and superior filtration. This high-efficiency 6-micron filter element effectively captures contaminants, preventing debris from reaching fuel injectors and maintaining peak engine performance.

Regular maintenance of your fuel filter is essential for maximizing fuel system efficiency. Whether for racing or daily driving, this replacement element keeps your fuel system running at its best.

6-micron filtration – Removes fine particles and contaminants to protect engine components
High-performance compatibility – Designed for use with Precision Raceworks inline fuel filters
Optimized fuel flow – Maintains consistent fuel delivery for peak performance
Durable construction – Engineered for long-lasting reliability in high-demand applications
Easy replacement – Simple installation for routine maintenance
Ideal for both street and track use – Ensures clean fuel supply for all driving conditions

Fuel Filter Replacement Guidelines:

Racing applications: Inspect at least twice per season and replace as needed
Daily driving: Inspect at least once a year or every 6,000 miles, replacing as necessary

Ensure your BMW fuel system stays clean and efficient with the Replacement Fuel Filter Element - 6 Micron | Precision Raceworks, the ultimate choice for maintaining performance and reliability.

Show More Show Less

Fuel Pump Cam Follower - BMW/MINI B46 B48 B58

We Price Match - Give Us A Call or Chat!

T#:39768327

Part#: 06H109311B

Ships in 3 Business Days

$ 29.99

This product was last offered at the strikethrough price on
06-25-2026

$ 27.53 USD

Add to Wish List

Qty

$ 27.53 USD

Add to Wish List

Filler Cap - Priced Each

T#:596863

Part#: 16117470341

In Stock

$ 35.74 USD

Add to Wish List

Qty

$ 35.74 USD

Add to Wish List

Precision Raceworks Universal Fuel Line NPT Tap - Quick Disconnect Ad...

T#:38161736

Part#: 201-0405

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

Precision Raceworks Ethanol 360 Fittings - 3/8" (9.49mm)

Universal Product - Please confirm your fuel line size prior to ordering

T#:37892104

Part#: 601-0288

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 3/8" (9.49mm) quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.

Show More Show Less

Precision Raceworks Universal Adjustable Fuel Pressure Regulator W/ 1...

T#:38195449

Part#: 501-0043

In Stock

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Adjust your fuel pressure as needed. Thanks to the 1:1 boost reference, fuel pressure will increase as boost pressure increases, ensuring fuel delivery remains optimal under all conditions.

Genuine BMW Sensor, High-Pressure i8 - 13538643665

T#:213944

Part#: 13538643665

In Stock

9% off MSRP $ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Qty

9% off MSRP

$ 122.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Genuine BMW Sensor, High-Pressure
This item fits the following BMW Chassis:
i8

Genuine BMW Fuel Hose - 1 Meter

T#:41534

Part#: 13311272750

In Stock

3% off MSRP $ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Qty

3% off MSRP

$ 64.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD

Add to Wish List

Genuine BMW Fuel Hose - 6X11mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E30,E34,E36,E38,E46

G-Series BMW & Supra A9x Billet Fuel Pump Top Hat

T#:38161730

Part#: 601-0316

Ships in 4 Business Days

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The Precision Raceworks BMW G-Series & A9x Toyota Supra Billet Tophat maximizes fuel system performance with up to three high-flow ports and 12-wire compatibility, offering versatile pump configurations to suit any setup.

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 5 Bar

T#:38094305

Part#: 601-0260

Back Ordered

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

AN6 Male Flare/ORB To 5/16" (7.89mm) Female Quick Connect

T#:38094309

Part#: 201-0274

Ships in 5 Business Days

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

The Precision Raceworks AN6 Male Flare/ORB to 5/16" (7.89mm) Female Quick Connect is a premium component designed for fluid or fuel systems. The AN6 male flare/ORB fitting ensures a secure connection, while the 5/16" (7.89mm) female quick-connect fitting allows for fast, tool-free disconnection and reconnection. This setup guarantees a reliable, leak-proof seal, ideal for high-performance systems. Would you like assistance sourcing this fitting or other Precision Raceworks components?

Show More Show Less

Replacement Fuel Filter Element - Single Open 10 Micron | Precision R...

T#:38161702

Part#: 101-0256

Ships in 9 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Replacement Fuel Filter Element - 10 Micron | Precision Raceworks offers excellent filtration for BMW and high-performance fuel systems, ensuring that larger particles and contaminants are filtered out to maintain optimal engine function. This 10-micron replacement filter element is designed to work seamlessly with Precision Raceworks inline fuel filters, delivering superior protection to your fuel system components, including injectors and fuel pumps.

Whether you're racing on the track or using your vehicle for daily driving, this replacement fuel filter element keeps your fuel system performing at its best by providing reliable filtration and smooth fuel delivery.

10-micron filtration – Effectively captures larger particles and contaminants to protect fuel system components
Maintains fuel flow – Supports smooth fuel delivery for consistent engine performance
Durable construction – Crafted with high-quality materials for long-lasting use under various conditions
Seamless integration – Direct replacement for Precision Raceworks inline fuel filters
Versatile use – Perfect for daily driving, street, and high-performance applications
Easy to replace – Simple maintenance to keep your fuel system clean and efficient

Fuel Filter Replacement Guidelines:

Racing applications: Inspect at least twice per season and replace as necessary
Daily driving: Inspect annually or every 6,000 miles, and replace as needed

Ensure your BMW’s fuel system stays in top shape with the Replacement Fuel Filter Element - 10 Micron | Precision Raceworks, designed to deliver consistent fuel flow and protect your high-performance engine.

Show More Show Less

PNP Ethanol Sensor Harness For Motiv Re|Flex Plus

T#:38161679

Part#: 201-0410

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Ideal for enthusiasts looking to optimize their vehicle’s fuel system, this ethanol sensor harness delivers precision and reliability for high-performance applications.

Precision Raceworks In-Line Micro Regulator - 6 Bar

T#:38094308

Part#: 601-0261

Ships in 9 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Precision Raceworks Multi-Port Injection Kit - 750cc - BMW B58 3.0L ...

T#:1316816

Part#: 601-0175

Ships in 5 Business Days

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 600rwhp on 93 Octane with water/methanol injection and a tune (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Precision Raceworks' Multiport Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the Precision Raceworks kit is the industry leader and only plate style kit featuring even fuel distribution across all 6 cylinders. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between!

Show More Show Less

Replacement Fuel Filter Element - Dual Open 6 Micron | Precision Race...

T#:38161705

Part#: 101-0258

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

The Replacement Fuel Filter Element - Dual Open 6 Micron | Precision Raceworks is designed for high-performance fuel systems, providing efficient filtration to protect vital components in your BMW. With a 6-micron filtration capability, this element ensures that harmful debris and contaminants are removed, safeguarding fuel pumps, injectors, and other critical parts from damage. Whether you're racing or daily driving, this filter helps maintain optimal fuel flow, ensuring consistent engine performance under all conditions.

This dual open design fits seamlessly into Precision Raceworks inline fuel filters, offering reliable and efficient performance for both street and track applications. Easy to replace and designed for maximum protection, this filter element helps keep your fuel system in top condition, ensuring long-lasting performance and reliability.

6-micron filtration – Effectively removes harmful contaminants, improving fuel system longevity
Dual open design – Provides balanced flow and efficient filtration for superior fuel system protection
Precision-engineered – Custom fit for Precision Raceworks inline fuel filters, ensuring easy installation
Durable construction – Built with high-quality materials to withstand demanding driving conditions
Protects critical components – Safeguards fuel pumps, injectors, and more from debris and impurities
Simple maintenance – Quick and easy to replace, ensuring your system performs at its best
Versatile usage – Suitable for both high-performance racing and daily driving

Fuel Filter Replacement Guidelines:

Racing applications: Inspect twice per season and replace as needed to maintain peak performance
Daily driving: Inspect at least once per year or every 6,000 miles for preventative maintenance

The Replacement Fuel Filter Element - Dual Open 6 Micron | Precision Raceworks is an essential upgrade to keep your BMW’s fuel system running smoothly and protected from contaminants.

Show More Show Less

7.89mm(5/16") Male - 7.89mm(5/16") Female - Fuel Line Fitting AN6 PTF...

T#:38094344

Part#: 201-0177

Ships in 9 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Perfect for upgrading or modifying your fuel delivery system, it offers effortless installation and long-lasting reliability in performance-driven builds

Precision Raceworks Upgraded Hybrid Fuel Pump - Stage 2.5 - G-Series ...

T#:34147753

Part#: 622-0284

Ships on Sep 17, 2026

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

The Precision Raceworks G-Series High Performance Primary fuel pump (Kits) are designed for customers looking to run all blends of E85. These pumps are ideal for customers looking to run a single fuel line to the front of the car and feed the high-pressure fuel pump and port injection from a single pump assembly.

Show More Show Less

Precision Raceworks Universal Fuel Line NPT Tap - Quick Disconnect Ad...

T#:38161737

Part#: 201-0406

Ships on Sep 22, 2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

Vader Solutions Low Pressure Fuel Pump Upgrade - G42 G20 G22 B58, G80...

T#:37251110

Part#: VSLPFPB58S58

Special Order: No Guaranteed ETA

$ 650.00 USD

Add to Wish List

Qty

$ 650.00 USD

Add to Wish List

Introducing the Vader Solutions Fuel System Upgrade for S58 powered M2, M3, and M4's and G-Chassis B58 models. This uses the same design and engineering that went into developing our popular A90 Supra Fuel System Upgrade. This kit is the best solution in terms of fueling, no additional fuel lines required outside of the fuel tank. The stock G-Series fuel line is 3/8" already from the factory, no need to replace that and add a regulator. BMW from the factory uses an electronic dampener/regulator combo, so this eliminates the need for aftermarket FPR. Super smooth install once the pump is removed and wiring is a breeze. We also DO NOT use zip-ties like the competitors do. We made it easy for you guys no matter what setup you're running in terms of fuel pump activation. Fuel System upgrade is required over 500-550WHP

Show More Show Less

Genuine BMW Fuel Injection Fuel Rail Bolt - BM6X70-8.8 - BMW MINI B38...

T#:525919

Part#: 13538661715

In Stock

$ 3.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

The one-time-use bolts from BMW are used to secure the fuel rail to the cylinder head of B-series engines. These should be replaced any time you remove the rail and injectors to ensure proper sealing of the injectors to the fuel rail after reinstallation.

Show More Show Less

Genuine BMW B38 B46 B48 B58 Gasket Ring - 13537591006

T#:42241

Part#: 13537591006

In Stock

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Genuine BMW Gasket Ring -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,I12 i8

Fits BMW Engines including:
N20,N26,N55,N63N,S55,S63N

Show More Show Less

JB4PRO Flex Fuel Add On Harness - B58/S58

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

Injector Seal

2X Entries Into Our F80 M3 Sweepstakes

T#:15015295

Part#: 13537591006

In Stock

$ 4.39 USD

Add to Wish List

Qty

$ 4.39 USD

Add to Wish List

Replace your injector o-rings when replacing your injectors or any sort of rebuild or refresh.

Genuine BMW Fuel Injector Bracket Screw - 5X30-10.9 - BMW MINI B38 B4...

T#:541393

Part#: 13538661716

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

The one-time-use bolts from BMW are used to secure the fuel rail to the fuel injector brackets of B-series engines, securing the injectors tightly to the fuel rail. These should be replaced any time you remove the rail and injectors to ensure proper sealing of the injectors to the fuel rail after reinstallation.

Show More Show Less

Genuine BMW High Pressure Fuel Pump Mounting Bolt - M6X25-U1 - BMW N2...

T#:207714

Part#: 13517632572

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

This bolt attaches the high-pressure fuel pump to the engine's cylinder head. Any time this bolt is removed to remove or replace the high-pressure fuel pump, it should be replaced with a brand new bolt as it is a single-use bolt per BMW. This bolt comes pre-applied with thread sealant to prevent oil leaks.

Show More Show Less

Vargas HPFP Block-Off Plate - BMW B58 & S58

2X Entries Into Our F80 M3 Sweepstakes

T#:51672724

Part#: VTT-X58-HPFP-BLO

Ships in 10 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

The VTT Billet B58 HPFP Block-off Plate allows you to cleanly remove the bulky factory pump, reducing engine bay clutter and weight.

Genuine BMW Fuel Injector Replacement Kit - BMW B58 3.0L (Gen2 B58C B...

T#:51356037

Part#: B58G2FIRKT

Ships in 3 Business Days

$ 2,218.99

This product was last offered at the strikethrough price on
08-07-2026

$ 2,209.99 USD

Add to Wish List

Qty

$ 2,209.99 USD

Add to Wish List

This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.

9.89mm Fuel Line Fitting AN6 PTFE To Male QC

T#:38094338

Part#: 201-0181

Ships in 5 Business Days

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

This fitting allows you to terminate an AN-6 PTFE fuel line with a secure, leak-free 9.89mm male quick-connect, making it an ideal solution for upgrading or modifying fuel delivery systems in high-horsepower, E85, and race-fuel applications.

Show More Show Less

Inline Fuel Filter AN8 Single In/Out - 6 Micron Filter

T#:38161700

Part#: 501-0115

In Stock

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Inline Fuel Filter AN8 Single In/Out - Universal Fitment | Precision Raceworks is a high-performance fuel filtration solution designed for BMW and other high-performance applications. This inline fuel filter ensures superior filtration, protecting your engine from contaminants that can compromise fuel system performance.

Crafted from high-quality billet aluminum, the filter body is precision-machined for durability and reliability. Featuring AN8 female ORB fittings on each end, this universal-fitment filter integrates seamlessly into custom fuel setups, making it ideal for both street and track applications.

Precision-machined billet aluminum construction – Ensures strength, durability, and long-lasting performance
AN8 female ORB fittings – Compatible with a wide range of fuel system setups
High-flow filtration – Effectively removes contaminants to protect fuel injectors and engine components
Universal fitment – Ideal for custom fuel system configurations in BMW and other performance vehicles
Corrosion-resistant anodized finish – Provides excellent protection against fuel and environmental factors
Reliable and efficient fuel delivery – Supports high-performance and racing applications

Note: Mounting hardware is not included.

Ensure clean and efficient fuel delivery with the Inline Fuel Filter AN8 Single In/Out - Universal Fitment | Precision Raceworks, engineered for high-performance reliability.

Show More Show Less

PTFE AN6 Fitting To 7.89mm Male QC

T#:38094325

Part#: 201-0176

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

This setup involves a PTFE AN6 fitting that connects to a 7.89mm male quick-connect (QC) fitting, commonly used in fuel or fluid systems. The PTFE hose offers excellent durability, with resistance to chemicals, heat, and pressure. The AN6 fitting ensures a secure connection, while the 7.89mm male QC fitting allows for fast, tool-free connections and disconnections. When choosing this fitting, ensure it's compatible with both your PTFE hose and system. Need help finding the right components?

Show More Show Less

Black Market Parts Universal Fuel Pump Wiring Kit

T#:38195421

Part#: 601-0054

Ships in 5 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

The Black Market Parts Universal Fuel Pump Wiring Kit is a one-stop shop solution for anyone looking to add an additional fuel pump to their fuel tank. This compact kit provides 6 inches of 100% E85 compliant 12 gauge wiring so you don't have to buy complete spools of wire just to get the little wire you need to extend the pump harness. The kit also includes all hardware for bulk head style pass-through for power used by pump manufacturers around the world. Full stainless bulk head power posts make it easy to add pass-through power to any fuel pump

Show More Show Less

Precision Raceworks Universal AN8 ORB To AN6 Male Flare Adapter ...

T#:38161738

Part#: 201-0331

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Convert your AN-8 ORB port to an AN-6 Male flare fitting with Viton O-Ring *O-Ring on AN6 side is only utilized if threading into ORB port

Precision Raceworks Stand Alone Auxiliary Fuel System - Dual Walbro 5...

T#:35559421

Part#: 601-0341

Ships in 8 Business Days

$ 2,172.99

This product was last offered at the strikethrough price on
05-13-2026

$ 1,949.99 USD

Add to Wish List

Qty

$ 1,949.99 USD

Add to Wish List

The Precision Raceworks M2/M240i (G87/G42) Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection! Since direct injection came out on modern BMWs, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory-programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential. Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check. With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on! Features & Benefits Billet Aluminum top hat with 3 high-flow fuel ports Dedicated fuel pump(s) for port injection system Optimal pump location resistant to fuel slosh under acceleration Fully adjustable 1:1 scaling billet fuel pressure regulator 10-micron USA made Microglass fuel filter (Ideal for E85) Smooth bore high flow PTFE fuel feed & return lines (AN6) All billet connections for both fuel line fittings and top-hat Plug and play connectors inside and outside* the top hat Configurable pump activation harness (see instructions for more details) Increased injector flow (when using 1:1 regulator feature vs static) Compatible with all stock or upgraded primary fuel pumps Easily expandable and upgrade-able for more fuel All components and parts feature 100% Ethanol Compatibility The AFS.800 dedicated auxiliary fuel system comes with all** necessary components to provide dedicated fuel system for port injection. Featuring Two Walbro 535’s (F9000295) fuel pumps with a combined flow of 800LPH at 3 bar. Pump flow 43.5 psi-a : 800 lph Recommended base pressure: 43.5 psi-g Maximum Fuel Pressure: 110 psi-g Number of Fuel Output Ports: 2 Number of Fuel Return Ports: 1 Pump 1: Walbro 535 (F90000295) Pump 2: Walbro 535 (F90000295) Available (unused) Electrical Connections: 2* Total System Weight:14 lbs (including fuel lines and wiring harness) **The AFS kits are designed for use with a port injection kit where the fuel rail is mounted above the manifold. To use with a plate-style spacer PI, please reach out to us directly at 713-770-6977 or [email protected]

Show More Show Less

3/8" PTFE AN6 To Female Swivel QC With 1/8" NPT Port

T#:38094342

Part#: 201-0241

Ships in 9 Business Days

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Upgrade your fuel system or fuel lines with this premium AN-6 PTFE fitting, enhancing reliability and performance for your build.

Precision Raceworks Stand Alone Auxiliary Fuel System - Walbro 535 Pu...

T#:35559420

Part#: 601-0342

Ships in 9 Business Days

$ 1,574.99 USD

Add to Wish List

Qty

$ 1,574.99 USD

Add to Wish List

The Precision Raceworks M2/M240i (G87/G42) Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection! Since direct injection came out on modern BMWs, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory-programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential. Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check. With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on! Features & Benefits Billet Aluminum top hat with 3 high-flow fuel ports Dedicated fuel pump(s) for port injection system Optimal pump location resistant to fuel slosh under acceleration Fully adjustable 1:1 scaling billet fuel pressure regulator 10-micron USA made Microglass fuel filter (Ideal for E85) Smooth bore high flow PTFE fuel feed & return lines (AN6) All billet connections for both fuel line fittings and top-hat Plug and play connectors inside and outside* the top hat Configurable pump activation harness (see instructions for more details) Increased injector flow (when using 1:1 regulator feature vs static) Compatible with all stock or upgraded primary fuel pumps Easily expandable and upgrade-able for more fuel All components and parts feature 100% Ethanol Compatibility The AFS.460 dedicated auxiliary fuel system comes with all** necessary components to provide a dedicated fuel system for port injection. Featuring a single Walbro 535 (F9000295) fuel pump which flows 460LPH at 3 bar. Pump flow 43.5 psi-a : 460 lph Recommended base pressure: 43.5 psi-g Maximum Fuel Pressure: 110 psi-g Number of Fuel Output Ports: 2 Number of Fuel Return Ports: 1 Pump 1: Walbro 535 (F90000295) Pump 2: N/A Available (unused) Electrical Connections: 4* Total System Weight: 11 lbs (including fuel lines and wiring harness) **The AFS kits are designed for use with a port injection kit where the fuel rail is mounted above the manifold. To use with a plate-style spacer PI, please reach out to us directly at 713-770-6977 or [email protected]

Show More Show Less

Precision Raceworks High Flow Direct Injectors - BMW S58 & B58 Gen2 3...

T#:50521401

Part#: 201-0485

In Stock

$ 2,099.00 USD

Add to Wish List

Qty

$ 2,099.00 USD

Add to Wish List

Precision Raceworks' upgraded S58/B58 Direct Injectors directly replace your factory injectors, offering 26% more fuel flow than stock S58 injectors and 60% more flow than stock B58 Gen 2 injectors

3-Sides Fuel Line Fitting AN6 Male Flare TEE

T#:38094340

Part#: 201-0221

Ships in 9 Business Days

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Upgrade your fuel system with this Fuel line fitting TEE featuring AN-6 Male threads on all three ends, and enjoy a high-flow, race-ready solution built for maximum performance and reliability.

Precision Raceworks Stand Alone Auxiliary Fuel System - Dual Walbro 4...

T#:47679265

Part#: 601-0350

Ships in 9 Business Days

$ 1,799.99 USD

Add to Wish List

Qty

$ 1,799.99 USD

Add to Wish List

The Precision Raceworks M2/M240i (G87/G42) Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection! Since direct injection came out on modern BMWs, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory-programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential. Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check. With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on!

Show More Show Less

PTFE Fuel Line Fitting 135 Degree AN-6 Female Flare

T#:38094331

Part#: 201-0222

Ships in 9 Business Days

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The Precision Raceworks PTFE Fuel Line Fitting 135-Degree AN-6 Female Flare is a premium component designed for optimal fuel system routing. Its 135-degree angle enhances flexibility and provides better clearance in confined spaces. The AN-6 female flare connection ensures a secure, leak-proof fit, while its PTFE compatibility offers exceptional resistance to heat, pressure, and chemicals, making it perfect for high-performance applications.

Show More Show Less

PTFE To AN-6 Female Flare - Fuel Line Fitting

T#:38094323

Part#: 201-0179

Ships in 9 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

The Precision Raceworks PTFE to AN-6 Female Flare Fuel Line Fitting is designed for high-performance fuel systems. Constructed from durable PTFE material, it ensures compatibility with various automotive applications. This universal fitting is suitable for numerous vehicle platforms, providing flexibility in fuel line routing. Features: AN-6 Compatibility: Designed to connect PTFE fuel lines to AN-6 female flare fittings, ensuring a secure and leak-free connection. Durable Construction: Made from high-quality PTFE material, offering resistance to fuel additives and high temperatures. Universal Fitment: Suitable for a wide range of vehicles, providing flexibility in fuel line routing. High-Performance Design: Engineered to meet the demands of high-performance fuel systems, ensuring reliable fuel delivery. For more information, visit the product page on Precision Raceworks' website.

Show More Show Less

Precision Raceworks Port Injection Plugs - Replaces EV14 Style Inject...

T#:18003817

Part#: PRINJPLGS

Ships in 9 Business Days

Starting at $ 9.99 USD

Add to Wish List

Starting at $ 9.99 USD

Add to Wish List

Use these in replacement of any standard short body EV14 style injector. These include appropriate o-rings for any of Precision Raceworks' port injection kits, including their aftermarket manifolds. Unlike other injector plugs, these feature shoulders to prevent the plug from sliding too far in either direction

Show More Show Less

PTFE AN6 Fitting To Male AN6 Flare

T#:38094326

Part#: 201-0243

Ships in 9 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

A PTFE AN6 fitting to male AN6 flare is commonly used in fuel or fluid systems. The PTFE AN6 fitting ensures a secure connection to a PTFE hose, offering superior resistance to heat, pressure, and chemicals. The male AN6 flare fitting provides a tight, leak-proof seal, ideal for high-performance applications that require dependable, durable connections.

Show More Show Less

PTFE Fuel Line Fitting 180 Degree AN-6 Female Flare

T#:38094332

Part#: 201-0264

Ships in 9 Business Days

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The Precision Raceworks PTFE Fuel Line Fitting 180-Degree AN-6 Female Flare is a high-quality component engineered for optimal fuel system routing. Its 180-degree design enables smooth, compact hose placement in confined spaces. The AN-6 female flare connection ensures a tight, leak-proof seal, while its PTFE compatibility offers superior resistance to heat, pressure, and chemicals, making it perfect for high-performance applications.

Show More Show Less

Double Female 90 Degree 9.89 QC

T#:38094349

Part#: 201-0230

Ships in 9 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Enhance your fuel system with the Precision Raceworks 90-degree double quick connect, and experience the convenience of professional-grade fittings designed for high-performance applications.

PTFE AN6 Fitting To 3/8" Female QC With 1/8"NPT Port

T#:38094324

Part#: 201-0229

Ships in 9 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The Precision Raceworks PTFE AN6 Fitting to 3/8" Female QC with a 1/8" NPT port is a premium component designed for fuel and fluid systems. The AN6 fitting securely connects to a PTFE hose, offering exceptional resistance to heat, pressure, and chemicals. The 3/8" female quick-connect fitting enables fast, tool-free disconnections and reconnections, while the 1/8" NPT port allows for additional connections, such as sensors or pressure gauges.

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 4 Bar

T#:38195450

Part#: 601-0259

Ships in 9 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Fuel System Parts for BMW G42 M240i xDrive B58 3.0L

Sub-Categories

Fuel Filter Replacement Guidelines:

Fuel Filter Replacement Guidelines:

Fuel Filter Replacement Guidelines:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results