BMW Fuel System Parts for BMW G42 M240i xDrive B58 3.0L

7.89mm(5/16") Male - 7.89mm(5/16") Female - Fuel Line Fitting AN6 PTF...

T#:38094344

Part#: 201-0177

Ships in 9 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Perfect for upgrading or modifying your fuel delivery system, it offers effortless installation and long-lasting reliability in performance-driven builds

Precision Raceworks Upgraded Hybrid Fuel Pump - Stage 2.5 - G-Series ...

T#:34147753

Part#: 622-0284

Ships on Sep 17, 2026

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

The Precision Raceworks G-Series High Performance Primary fuel pump (Kits) are designed for customers looking to run all blends of E85. These pumps are ideal for customers looking to run a single fuel line to the front of the car and feed the high-pressure fuel pump and port injection from a single pump assembly.

Show More Show Less

Precision Raceworks Universal Fuel Line NPT Tap - Quick Disconnect Ad...

T#:38161737

Part#: 201-0406

Ships on Sep 22, 2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

Vader Solutions Low Pressure Fuel Pump Upgrade - G42 G20 G22 B58, G80...

T#:37251110

Part#: VSLPFPB58S58

Special Order: No Guaranteed ETA

$ 650.00 USD

Add to Wish List

Qty

$ 650.00 USD

Add to Wish List

Introducing the Vader Solutions Fuel System Upgrade for S58 powered M2, M3, and M4's and G-Chassis B58 models. This uses the same design and engineering that went into developing our popular A90 Supra Fuel System Upgrade. This kit is the best solution in terms of fueling, no additional fuel lines required outside of the fuel tank. The stock G-Series fuel line is 3/8" already from the factory, no need to replace that and add a regulator. BMW from the factory uses an electronic dampener/regulator combo, so this eliminates the need for aftermarket FPR. Super smooth install once the pump is removed and wiring is a breeze. We also DO NOT use zip-ties like the competitors do. We made it easy for you guys no matter what setup you're running in terms of fuel pump activation. Fuel System upgrade is required over 500-550WHP

Show More Show Less

BMW GEN2 Upgraded High Pressure Pump B58

T#:31291063

Part#: SP-B58-FX350-NEY

Special Order: No Guaranteed ETA

$ 2,348.00 USD

Add to Wish List

Qty

$ 2,348.00 USD

Add to Wish List

The FX-350 is truly Plug and Play for all platforms we are offering and comes with all the lines and hardware needed for a clean easy install.

BMW B58 3.0L Upgraded High Pressure Pump

T#:28836384

Part#: SP-B58-FX350

Special Order: No Guaranteed ETA

$ 2,199.00 USD

Add to Wish List

Qty

$ 2,199.00 USD

Add to Wish List

BMW Gen2 B58 FX350 Upgraded High Pressure Pump

Upgrade your BMW's performance with the BMW Gen2 B58 FX350 Upgraded High Pressure Pump. This high-quality pump is designed to deliver increased fuel pressure, ensuring optimal engine performance and reliability for your BMW.

Specifically engineered for BMW Gen2 B58 engines
Increases fuel pressure for improved engine performance
Enhances throttle response and overall driving experience
Direct replacement for the stock high-pressure pump
High-quality construction for long-lasting durability

Show More Show Less

High Pressure Fuel Sensor

10X Entries Into Our F80 M3 Sweepstakes

T#:4921499

Part#: 13538643665

In Stock

Sale - Save 50% $ 86.99

This product was last offered at the strikethrough price on
05-03-2026

$ 43.50 USD

Add to Wish List

Qty

Sale - Save 50%

$ 86.99

This product was last offered at the strikethrough price on
05-03-2026

$ 43.50 USD

Add to Wish List

Stage 2 LPFP Upgrade & Lock-Ring Removal Tool - G-Chassis B58 B46 ...

T#:25075820

Part#: BX8LPFPS2LRRT

Ships in 7 Business Days

$ 619.00 USD

Add to Wish List

Qty

$ 619.00 USD

Add to Wish List

Finally, a quality low-pressure fuel system upgrade worthy of installing in your B58-equipped G-Chassis BMW! This drop-in bucket assembly replaces the factory fuel-sending unit, supports ethanol fuel and up to 700 wheel horsepower!

Show More Show Less

Genuine BMW Fuel Injection Fuel Rail Bolt - BM6X70-8.8 - BMW MINI B38...

T#:525919

Part#: 13538661715

In Stock

$ 3.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

The one-time-use bolts from BMW are used to secure the fuel rail to the cylinder head of B-series engines. These should be replaced any time you remove the rail and injectors to ensure proper sealing of the injectors to the fuel rail after reinstallation.

Show More Show Less

Genuine BMW B38 B46 B48 B58 Gasket Ring - 13537591006

T#:42241

Part#: 13537591006

In Stock

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Genuine BMW Gasket Ring -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,I12 i8

Fits BMW Engines including:
N20,N26,N55,N63N,S55,S63N

Show More Show Less

Gas Cap

10X Entries Into Our F80 M3 Sweepstakes

T#:48539230

Part#: 16117222391

In Stock

Sale - Save 15% $ 19.99

This product was last offered at the strikethrough price on
08-19-2026

$ 16.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 19.99

This product was last offered at the strikethrough price on
08-19-2026

$ 16.99 USD

Add to Wish List

JB4PRO Flex Fuel Add On Harness - B58/S58

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

Pro-Line Injector And Glow Plug Grease - 20g

10X Entries Into Our F80 M3 Sweepstakes

T#:49787695

Part#: 22243

In Stock

$ 6.99 USD

Add to Wish List

Qty

$ 6.99 USD

Add to Wish List

This high-performance lubricant is formulated to prevent moisture ingress and oxidation, which are the primary causes of "frozen" injectors and glow plugs.

Injector Seal

2X Entries Into Our F80 M3 Sweepstakes

T#:15015295

Part#: 13537591006

In Stock

$ 4.39 USD

Add to Wish List

Qty

$ 4.39 USD

Add to Wish List

Replace your injector o-rings when replacing your injectors or any sort of rebuild or refresh.

Genuine BMW Fuel Injector Bracket Screw - 5X30-10.9 - BMW MINI B38 B4...

T#:541393

Part#: 13538661716

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

The one-time-use bolts from BMW are used to secure the fuel rail to the fuel injector brackets of B-series engines, securing the injectors tightly to the fuel rail. These should be replaced any time you remove the rail and injectors to ensure proper sealing of the injectors to the fuel rail after reinstallation.

Show More Show Less

Genuine BMW High Pressure Fuel Pump Mounting Bolt - M6X25-U1 - BMW N2...

T#:207714

Part#: 13517632572

In Stock

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

This bolt attaches the high-pressure fuel pump to the engine's cylinder head. Any time this bolt is removed to remove or replace the high-pressure fuel pump, it should be replaced with a brand new bolt as it is a single-use bolt per BMW. This bolt comes pre-applied with thread sealant to prevent oil leaks.

Show More Show Less

Flex Fuel ECA - Plug and Play - OEM HPFP - G42, G20, G22, G23, G26, G...

T#:55713511

Part#: DE-582-ECA-242

In Stock

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

This hardware package gives your BMW powerplant the ability to scale output dynamically based on your exact ethanol blend. No more draining the tank or flashing different maps at the gas station

BMW Port Injection Kit - B58 2015+

T#:38890887

Part#: BMS-PIK-B58

Ships on Sep 16, 2026

$ 699.00 USD

Add to Wish List

Qty

$ 699.00 USD

Add to Wish List

The Fuel-It! Port Injection Manifold Spacers are precisely CNC-machined for a seamless, factory-like fit and anodized black for enhanced durability and a sleek appearance. This port injection kit includes all necessary installation hardware, heavy-duty gaskets, and a plug-and-play BMS braided fuel line adapter. To complete the kit, you'll need the Fuel Line, Fuel Injectors, and a Port Injection Controller, which are available separately or can be added to your package. An aftermarket charge pipe is required to accommodate the additional height of the manifold. For Gen 1 B58, we recommend the BMS Elite Aluminum Replacement Charge Pipe Upgrade, while for Gen 2 B58, options include the BMS Elite BMW/Supra B58TU Gen2 Charge Pipe Blow-Off Valve (BOV) Kit or the BMS Elite BMW/Supra B58TU Gen2 Charge Pipe.

Show More Show Less

Second Fuel Rail Kit for CSF B58 & S58 Air-to-Air Billet Manifolds ...

2X Entries Into Our F80 M3 Sweepstakes

T#:56001929

Part#: CSF8404

Ships in 3 Business Days

$ 300.00 USD

Add to Wish List

Qty

$ 300.00 USD

Add to Wish List

Eliminate fuel starvation on your high boost S58 or B58 build with this track engineered, billet aluminum secondary port injection rail built to handle extreme fueling demands.

Radium - Split-Flow Flex Fuel Sensor Adapter

T#:53290958

Part#: 20-0589

In Stock at Vendor

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Bosch Injector Seal

T#:591890

Part#: 13537591006

Ships in 2 Business Days

$ 4.99

This product was last offered at the strikethrough price on
07-23-2026

$ 4.07 USD

Add to Wish List

Qty

$ 4.07 USD

Add to Wish List

Seal that goes from the end of the injector to the motor

Fuel-It! Flex Fuel Kit - G2x/G3x/G4x B58

T#:21209864

Part#: GB58BFFK

Ships on Sep 16, 2026

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

The complete kit with Bluetooth ECA includes the following: Genuine Continental® ethanol sensor Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Fuel-It! Bluetooth analyzer (iPhone or Android app must be downloaded to use this kit) Plug and play harness Includes both Bluetooth App & 5v analog output for JB4 or flash tuning *For the BMW G-series JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI Ethanol Setup option 0 to enable pin location 2/3/4 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

High-pressure fuel pump supply port caps

T#:5135636

Part#: AGA-CP-0-14

Ships in 7 Business Days

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Don't let dirt be the reason for bad fuel injectors.

Vargas HPFP Block-Off Plate - BMW B58 & S58

2X Entries Into Our F80 M3 Sweepstakes

T#:51672724

Part#: VTT-X58-HPFP-BLO

Ships in 10 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

The VTT Billet B58 HPFP Block-off Plate allows you to cleanly remove the bulky factory pump, reducing engine bay clutter and weight.

Dorch Engineering DS3 HPFP Upgrade - G42, G20, G22, G23, G26, G01, G0...

T#:55713520

Part#: DE-582-30A

Ships in 4 Business Days

$ 2,399.00 USD

Add to Wish List

Qty

$ 2,399.00 USD

Add to Wish List

The Dorch Engineering DS3 B58 Gen2 High Pressure Fuel Pump Upgrade is the highest-flowing single-pump direct injection solution on the market. Engineered for aggressive ethanol builds

PFS Port Injection Kit - 900CC - BMW B58

T#:51813340

Part#: PFS-B58-PI-8

Ships in 10 Business Days

$ 2,159.99 USD

Add to Wish List

Qty

$ 2,159.99 USD

Add to Wish List

When factory fueling becomes the bottleneck in your B58 build, the Vargas Turbo Technologies PFS Port Injection Kit steps in as the ultimate hardware solution.

Genuine BMW Fuel Injector Replacement Kit - BMW B58 3.0L (Gen2 B58C B...

T#:51356037

Part#: B58G2FIRKT

Ships in 2 Business Days

$ 2,218.99

This product was last offered at the strikethrough price on
08-07-2026

$ 2,209.99 USD

Add to Wish List

Qty

$ 2,209.99 USD

Add to Wish List

This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.

9.89mm Fuel Line Fitting AN6 PTFE To Male QC

T#:38094338

Part#: 201-0181

Ships in 5 Business Days

$ 17.99 USD

Add to Wish List

Qty

$ 17.99 USD

Add to Wish List

This fitting allows you to terminate an AN-6 PTFE fuel line with a secure, leak-free 9.89mm male quick-connect, making it an ideal solution for upgrading or modifying fuel delivery systems in high-horsepower, E85, and race-fuel applications.

Show More Show Less

Inline Fuel Filter AN8 Single In/Out - 6 Micron Filter

T#:38161700

Part#: 501-0115

In Stock

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Inline Fuel Filter AN8 Single In/Out - Universal Fitment | Precision Raceworks is a high-performance fuel filtration solution designed for BMW and other high-performance applications. This inline fuel filter ensures superior filtration, protecting your engine from contaminants that can compromise fuel system performance.

Crafted from high-quality billet aluminum, the filter body is precision-machined for durability and reliability. Featuring AN8 female ORB fittings on each end, this universal-fitment filter integrates seamlessly into custom fuel setups, making it ideal for both street and track applications.

Precision-machined billet aluminum construction – Ensures strength, durability, and long-lasting performance
AN8 female ORB fittings – Compatible with a wide range of fuel system setups
High-flow filtration – Effectively removes contaminants to protect fuel injectors and engine components
Universal fitment – Ideal for custom fuel system configurations in BMW and other performance vehicles
Corrosion-resistant anodized finish – Provides excellent protection against fuel and environmental factors
Reliable and efficient fuel delivery – Supports high-performance and racing applications

Note: Mounting hardware is not included.

Ensure clean and efficient fuel delivery with the Inline Fuel Filter AN8 Single In/Out - Universal Fitment | Precision Raceworks, engineered for high-performance reliability.

Show More Show Less

PTFE AN6 Fitting To 7.89mm Male QC

T#:38094325

Part#: 201-0176

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

This setup involves a PTFE AN6 fitting that connects to a 7.89mm male quick-connect (QC) fitting, commonly used in fuel or fluid systems. The PTFE hose offers excellent durability, with resistance to chemicals, heat, and pressure. The AN6 fitting ensures a secure connection, while the 7.89mm male QC fitting allows for fast, tool-free connections and disconnections. When choosing this fitting, ensure it's compatible with both your PTFE hose and system. Need help finding the right components?

Show More Show Less

Black Market Parts Universal Fuel Pump Wiring Kit

T#:38195421

Part#: 601-0054

Ships in 5 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

The Black Market Parts Universal Fuel Pump Wiring Kit is a one-stop shop solution for anyone looking to add an additional fuel pump to their fuel tank. This compact kit provides 6 inches of 100% E85 compliant 12 gauge wiring so you don't have to buy complete spools of wire just to get the little wire you need to extend the pump harness. The kit also includes all hardware for bulk head style pass-through for power used by pump manufacturers around the world. Full stainless bulk head power posts make it easy to add pass-through power to any fuel pump

Show More Show Less

Precision Raceworks Universal AN8 ORB To AN6 Male Flare Adapter ...

T#:38161738

Part#: 201-0331

In Stock

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Convert your AN-8 ORB port to an AN-6 Male flare fitting with Viton O-Ring *O-Ring on AN6 side is only utilized if threading into ORB port

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 1300cc -...

NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...

T#:47679243

Part#: 501-0116

Ships in 7 Business Days

$ 884.99 USD

Add to Wish List

Qty

$ 884.99 USD

Add to Wish List

The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports

Show More Show Less

Precision Raceworks Stand Alone Auxiliary Fuel System - Dual Walbro 5...

T#:35559421

Part#: 601-0341

Ships in 8 Business Days

$ 2,172.99

This product was last offered at the strikethrough price on
05-13-2026

$ 1,949.99 USD

Add to Wish List

Qty

$ 1,949.99 USD

Add to Wish List

The Precision Raceworks M2/M240i (G87/G42) Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection! Since direct injection came out on modern BMWs, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory-programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential. Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check. With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on! Features & Benefits Billet Aluminum top hat with 3 high-flow fuel ports Dedicated fuel pump(s) for port injection system Optimal pump location resistant to fuel slosh under acceleration Fully adjustable 1:1 scaling billet fuel pressure regulator 10-micron USA made Microglass fuel filter (Ideal for E85) Smooth bore high flow PTFE fuel feed & return lines (AN6) All billet connections for both fuel line fittings and top-hat Plug and play connectors inside and outside* the top hat Configurable pump activation harness (see instructions for more details) Increased injector flow (when using 1:1 regulator feature vs static) Compatible with all stock or upgraded primary fuel pumps Easily expandable and upgrade-able for more fuel All components and parts feature 100% Ethanol Compatibility The AFS.800 dedicated auxiliary fuel system comes with all** necessary components to provide dedicated fuel system for port injection. Featuring Two Walbro 535’s (F9000295) fuel pumps with a combined flow of 800LPH at 3 bar. Pump flow 43.5 psi-a : 800 lph Recommended base pressure: 43.5 psi-g Maximum Fuel Pressure: 110 psi-g Number of Fuel Output Ports: 2 Number of Fuel Return Ports: 1 Pump 1: Walbro 535 (F90000295) Pump 2: Walbro 535 (F90000295) Available (unused) Electrical Connections: 2* Total System Weight:14 lbs (including fuel lines and wiring harness) **The AFS kits are designed for use with a port injection kit where the fuel rail is mounted above the manifold. To use with a plate-style spacer PI, please reach out to us directly at 713-770-6977 or [email protected]

Show More Show Less

Pump Filter Sock

T#:38128034

Part#: 125-190

Ships in 8 Business Days

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Perfect for vehicle owners looking to maintain their vehicle’s fuel system integrity, this Walbro Pump Filter Sock replacement is a reliable upgrade for optimal driving performance.

3/8" PTFE AN6 To Female Swivel QC With 1/8" NPT Port

T#:38094342

Part#: 201-0241

Ships in 9 Business Days

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

Upgrade your fuel system or fuel lines with this premium AN-6 PTFE fitting, enhancing reliability and performance for your build.

Precision Raceworks Stand Alone Auxiliary Fuel System - Walbro 535 Pu...

T#:35559420

Part#: 601-0342

Ships in 9 Business Days

$ 1,574.99 USD

Add to Wish List

Qty

$ 1,574.99 USD

Add to Wish List

The Precision Raceworks M2/M240i (G87/G42) Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection! Since direct injection came out on modern BMWs, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory-programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential. Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check. With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on! Features & Benefits Billet Aluminum top hat with 3 high-flow fuel ports Dedicated fuel pump(s) for port injection system Optimal pump location resistant to fuel slosh under acceleration Fully adjustable 1:1 scaling billet fuel pressure regulator 10-micron USA made Microglass fuel filter (Ideal for E85) Smooth bore high flow PTFE fuel feed & return lines (AN6) All billet connections for both fuel line fittings and top-hat Plug and play connectors inside and outside* the top hat Configurable pump activation harness (see instructions for more details) Increased injector flow (when using 1:1 regulator feature vs static) Compatible with all stock or upgraded primary fuel pumps Easily expandable and upgrade-able for more fuel All components and parts feature 100% Ethanol Compatibility The AFS.460 dedicated auxiliary fuel system comes with all** necessary components to provide a dedicated fuel system for port injection. Featuring a single Walbro 535 (F9000295) fuel pump which flows 460LPH at 3 bar. Pump flow 43.5 psi-a : 460 lph Recommended base pressure: 43.5 psi-g Maximum Fuel Pressure: 110 psi-g Number of Fuel Output Ports: 2 Number of Fuel Return Ports: 1 Pump 1: Walbro 535 (F90000295) Pump 2: N/A Available (unused) Electrical Connections: 4* Total System Weight: 11 lbs (including fuel lines and wiring harness) **The AFS kits are designed for use with a port injection kit where the fuel rail is mounted above the manifold. To use with a plate-style spacer PI, please reach out to us directly at 713-770-6977 or [email protected]

Show More Show Less

Precision Raceworks High Flow Direct Injectors - BMW S58 & B58 Gen2 3...

T#:50521401

Part#: 201-0485

In Stock

$ 2,099.00 USD

Add to Wish List

Qty

$ 2,099.00 USD

Add to Wish List

Precision Raceworks' upgraded S58/B58 Direct Injectors directly replace your factory injectors, offering 26% more fuel flow than stock S58 injectors and 60% more flow than stock B58 Gen 2 injectors

3-Sides Fuel Line Fitting AN6 Male Flare TEE

T#:38094340

Part#: 201-0221

Ships in 9 Business Days

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Upgrade your fuel system with this Fuel line fitting TEE featuring AN-6 Male threads on all three ends, and enjoy a high-flow, race-ready solution built for maximum performance and reliability.

Precision Raceworks Stand Alone Auxiliary Fuel System - Dual Walbro 4...

T#:47679265

Part#: 601-0350

Ships in 9 Business Days

$ 1,799.99 USD

Add to Wish List

Qty

$ 1,799.99 USD

Add to Wish List

The Precision Raceworks M2/M240i (G87/G42) Stand Alone Auxiliary Fuel System is the highest-performing and most stable low-pressure fuel system on the market! Forget about how things have been done and embrace the benefits of dedicated fueling for your port injection! Since direct injection came out on modern BMWs, enthusiasts have been adding port injection. With this came the need to upgrade the low-pressure fuel system to keep up. Historically this was done by increasing the output of the main fuel system. Unfortunately, the main fuel pump is controlled using PWM by a factory-programmed controller designed to reduce output when target fuel pressure (typically 5 bar) is exceeded, creating a constant battle when pumps are added or upgraded. This limits upgraded fuel pumps from performing to their full potential. Additionally, the high-pressure pump control system dumps fuel back into the low-pressure system at high pressure low volume resulting in oscillations of the low-pressure fuel system. Because of this, the DI system in the car is required to constantly make corrections to keep target AFR in check. With this stand-alone low-pressure fuel system dedicated to your port fueling that is a thing of the past! Get rock-solid fuel pressures at any pressure, run fuel pressures that are 1:1 scalable to boost pressure, flow more fuel with dedicated lines, run smaller injectors and still get more fuel than you did with large injectors (allowing for higher resolution), put less demand on the car’s DI system to correct for fluctuations in pressure, even your tuner will be grateful as the system makes tuning of port fueling even easier and more accurate, the list of benefits goes on and on!

Show More Show Less

PTFE Fuel Line Fitting 135 Degree AN-6 Female Flare

T#:38094331

Part#: 201-0222

Ships in 9 Business Days

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The Precision Raceworks PTFE Fuel Line Fitting 135-Degree AN-6 Female Flare is a premium component designed for optimal fuel system routing. Its 135-degree angle enhances flexibility and provides better clearance in confined spaces. The AN-6 female flare connection ensures a secure, leak-proof fit, while its PTFE compatibility offers exceptional resistance to heat, pressure, and chemicals, making it perfect for high-performance applications.

Show More Show Less

PTFE To AN-6 Female Flare - Fuel Line Fitting

T#:38094323

Part#: 201-0179

Ships in 9 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

The Precision Raceworks PTFE to AN-6 Female Flare Fuel Line Fitting is designed for high-performance fuel systems. Constructed from durable PTFE material, it ensures compatibility with various automotive applications. This universal fitting is suitable for numerous vehicle platforms, providing flexibility in fuel line routing. Features: AN-6 Compatibility: Designed to connect PTFE fuel lines to AN-6 female flare fittings, ensuring a secure and leak-free connection. Durable Construction: Made from high-quality PTFE material, offering resistance to fuel additives and high temperatures. Universal Fitment: Suitable for a wide range of vehicles, providing flexibility in fuel line routing. High-Performance Design: Engineered to meet the demands of high-performance fuel systems, ensuring reliable fuel delivery. For more information, visit the product page on Precision Raceworks' website.

Show More Show Less

Precision Raceworks Port Injection Plugs - Replaces EV14 Style Inject...

T#:18003817

Part#: PRINJPLGS

Ships in 9 Business Days

Starting at $ 9.99 USD

Add to Wish List

Starting at $ 9.99 USD

Add to Wish List

Use these in replacement of any standard short body EV14 style injector. These include appropriate o-rings for any of Precision Raceworks' port injection kits, including their aftermarket manifolds. Unlike other injector plugs, these feature shoulders to prevent the plug from sliding too far in either direction

Show More Show Less

PTFE AN6 Fitting To Male AN6 Flare

T#:38094326

Part#: 201-0243

Ships in 9 Business Days

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

A PTFE AN6 fitting to male AN6 flare is commonly used in fuel or fluid systems. The PTFE AN6 fitting ensures a secure connection to a PTFE hose, offering superior resistance to heat, pressure, and chemicals. The male AN6 flare fitting provides a tight, leak-proof seal, ideal for high-performance applications that require dependable, durable connections.

Show More Show Less

PTFE Fuel Line Fitting 180 Degree AN-6 Female Flare

T#:38094332

Part#: 201-0264

Ships in 9 Business Days

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

The Precision Raceworks PTFE Fuel Line Fitting 180-Degree AN-6 Female Flare is a high-quality component engineered for optimal fuel system routing. Its 180-degree design enables smooth, compact hose placement in confined spaces. The AN-6 female flare connection ensures a tight, leak-proof seal, while its PTFE compatibility offers superior resistance to heat, pressure, and chemicals, making it perfect for high-performance applications.

Show More Show Less

Double Female 90 Degree 9.89 QC

T#:38094349

Part#: 201-0230

Ships in 9 Business Days

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Enhance your fuel system with the Precision Raceworks 90-degree double quick connect, and experience the convenience of professional-grade fittings designed for high-performance applications.

PTFE AN6 Fitting To 3/8" Female QC With 1/8"NPT Port

T#:38094324

Part#: 201-0229

Ships in 9 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

The Precision Raceworks PTFE AN6 Fitting to 3/8" Female QC with a 1/8" NPT port is a premium component designed for fuel and fluid systems. The AN6 fitting securely connects to a PTFE hose, offering exceptional resistance to heat, pressure, and chemicals. The 3/8" female quick-connect fitting enables fast, tool-free disconnections and reconnections, while the 1/8" NPT port allows for additional connections, such as sensors or pressure gauges.

Show More Show Less

Precision Raceworks In-Line Micro Regulator - 4 Bar

T#:38195450

Part#: 601-0259

Ships in 9 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.

Show More Show Less

Precision Raceworks PTFE Fuel Line Fitting - AN-6 To 7.89mm Female QC...

T#:38094320

Part#: 201-0178

Ships in 9 Business Days

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

he Precision Raceworks PTFE Fuel Line Fitting is a 180-degree AN-6 female flare fitting designed for high-performance fuel systems.onstructed from durable PTFE material, it ensures compatibility with various automotive applications.his universal fitting is suitable for numerous vehicle platforms, providing flexibility in fuel line routing. *Features:** **AN-6 Compatibility:** Designed to connect AN-6 male flare fittings to AN-6 female flare fittings at a 180-degree angle. **Durable Construction:** Made from high-quality PTFE material for enhanced durability and resistance to fuel additives. **Universal Fitment:** Suitable for a wide range of vehicle platforms, offering flexibility in fuel line routing. **High-Performance Design:** Engineered to meet the demands of high-performance fuel systems, ensuring reliable fuel delivery. or more information, visit the product page:citeturn0search0

Show More Show Less

Replacement Ferrule For PTFE Fittings

T#:38094322

Part#: 101-0185

Ships in 9 Business Days

$ 3.00 USD

Add to Wish List

Qty

$ 3.00 USD

Add to Wish List

Replacement ferrules, also known as olives, are vital components for assembling PTFE fuel lines. These one-time-use metal ferrules are crimped onto the PTFE tube to form a secure, leak-proof connection with the fitting. Once crimped, they can leak if the fitting is loosened or removed. For high-performance fuel systems, Precision Raceworks provides replacement ferrules designed for PTFE fittings. These ferrules are engineered to deliver a reliable seal and preserve the integrity of your fuel line connections. When selecting replacement ferrules, it’s important to choose ones that are compatible with your specific PTFE hose and fittings to ensure maximum performance and safety.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Fuel System Parts for BMW G42 M240i xDrive B58 3.0L

Sub-Categories

BMW Gen2 B58 FX350 Upgraded High Pressure Pump

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results