BMW G80 M3 S58 3.0L

20x11" ET18 Anthracite APEX VS-5RS Forged BMW Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:14155782

Part#: VS5RS2011ET18AN

Ships in 5 Business Days

$ 1,029.00 USD

Add to Wish List

Qty

$ 1,029.00 USD

Add to Wish List

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: BRAND: APEX DESIGNED FOR: No WHEEL CONSTRUCTION: Forged MODEL: VS-5RS WHEEL SIZE: 20x11" ET18 WHEEL DIAMETER: 20" WHEEL WIDTH: 11.0" OFFSET: ET18 FINISH: Anthracite FACE PROFILE: Profile 4; super deep concavity BOLT PATTERN: 5x112mm CENTER BORE: 66.6mm LOAD RATING: 1,600 lbs WEIGHT: ~21.7 lbs REGISTRATION #: STL - Passed On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

19" APEX VS-5 Square Wheel Set - Choose Your Finish!

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:40545998

Part#: VS5191012

Ships in 5 Business Days

Starting at $ 2,156.00 USD

Add to Wish List

Starting at $ 2,156.00 USD

Add to Wish List

APEX VS-5 19x10" ET12 Square Wheel Set VS-5 maximizes the performance potential of a flow-formed wheel. It combines features typically only found on forged wheels with a premium look at an unbeatable price. Features: Iconic 5-Spoke Design Side-Milled Spokes for Reduced Weight Reinforced Inner Lip for Strength Massive Brake Clearance Ultra-Concave Face Profiles Independently Tested and Certified Unmatched Replacement Program Lifetime Structural Warranty The VS-5 brings the aggressive look of our iconic forged VS-5RS to a flow-formed wheel. At a fraction of the price of its forged sibling, VS-5 punches well above its weight and maximizes the performance potential of a flow-formed wheel. With nearly two decades of experience perfecting track-ready flow-formed wheels, we engineered the VS-5 to deliver Real Performance at an unbeatable value. With a strength-to-weight ratio and features typically reserved for forged wheels, the VS-5 pushes the boundaries of flow-formed manufacturing to the max. Weighing only ~2-2.5 lbs more than its forged sibling, the VS-5 isn’t just a top tier option in the flow-formed space, it’s a wheel we consider the last step in performance before leveling up to a forged design. Flow-forming enables us to create high-performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow-formed wheels have a higher load rating than some competitors' forged wheels. A critical part of VS-5’s remarkable weight-savings, side-milled spokes also help with its stunning looks. The VS-5 features advanced side-milled spokes that have any excess material that doesn’t add strength removed from the sides of the spokes via precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise, we believe it's essential. The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our flow-formed Evolution Line adds more material to this vulnerable area as an added layer of protection against impact from track berms, potholes, and whatever else the road may throw at you.

Show More Show Less

Race Ramps - 5" Racer Chock

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641873

Part#: RR-RC-5

Ships in 10 Business Days

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

12" racer chock – ultimate tire grip

19x11" ET22 Satin Black APEX VS-5RS Forged BMW Wheel

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:18965490

Part#: VS5RS1911ET22SMB

Ships in 5 Business Days

$ 929.00 USD

Add to Wish List

Qty

$ 929.00 USD

Add to Wish List

Race Ramps - 14" Wheel Stands

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2438599

Part#: RR-WS-14

Ships in 10 Business Days

$ 376.99 USD

Add to Wish List

Qty

$ 376.99 USD

Add to Wish List

Designed as an alignment stand, this set of two wheel stands can also be used for car display stands in showrooms or at shows.

Race Ramps - Adjustable Height 12" High Wheel Cribs

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2438592

Part#: RR-WC-12-2

Back Ordered

$ 264.99 USD

Add to Wish List

Qty

$ 264.99 USD

Add to Wish List

Safer than jack stands and far more attractive, our multi-purpose 12-inch Wheel Cribs are a stable, sleek alternative that offer greater maneuverability and versatility.

Extended Spark Plug Socket

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:391150

Part#: SUU884506

In Stock

9% off MSRP $ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

Qty

9% off MSRP

$ 31.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.99 USD

Add to Wish List

3/8" drive socket with 5/8" opening for most spark plugs

Akrapovic Titanium Slip On Exhaust With Classic Carbon Fiber Tips - G...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3018041

Part#: BM/T/21H-C

In Stock at Vendor

$ 9,962.99 USD

Add to Wish List

Qty

$ 9,962.99 USD

Add to Wish List

Includes rounded Classic Carbon Fiber Exhaust Tips The exhaust tone is most noticeable as you move through the gears and accelerate, and this can be further controlled through the addition of the optional Akrapovic Sound Kit to provide increased aural pleasure. Akrapovic has achieved power gains of 10.9 HP at 6,000 rpm and torque increases of 10.3 lb/ft Torque at 6,000 rpm when tested on the Akrapovic dyno against a G80 M3 with a stock M Sport exhaust system for comparison.

Show More Show Less

Race Ramps - Rack Ramps - 5"

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641869

Part#: RR-RACK-5

Ships in 10 Business Days

$ 362.99 USD

Add to Wish List

Qty

$ 362.99 USD

Add to Wish List

5" cutout rack ramp - 8.6 degree approach angle

Akrapovic Sound Kit for BMW G80 G82 M3 M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3018043

Part#: P-HF1384

Ships in 3 Business Days

$ 605.99 USD

Add to Wish List

Qty

$ 605.99 USD

Add to Wish List

Akrapovic Sound Kit for BMW G80 G82 M3 M4 offers BMW owners the ability to control the sound of their Akrapovic exhaust system directly from the cockpit. Utilizing advanced Akrapovic technology, this kit allows drivers to switch between a quieter mode and a sportier exhaust sound. The system includes a receiver, already integrated into the Evolution exhaust system, which operates the actuators to open or close the exhaust valves. Drivers can manage the sound with the Sound Remote Controller or the latest smartphone app, compatible with both iOS and Android devices.

Enhanced Control: Allows for easy switching between quiet and sporty exhaust modes.
Advanced Technology: Features Akrapovic technology for precise sound management.
Convenient Operation: Control the exhaust valves using the Sound Remote Controller or a smartphone app.
Compatibility: Designed specifically for BMW G80 and G82 M3 and M4 models.
Easy Integration: Receiver included in the Evolution system for straightforward installation.

Show More Show Less

Akrapovic Downpipe With Cat - G80/G82 M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3018044

Part#: DP-BM/SS/8

In Stock at Vendor

$ 4,331.99 USD

Add to Wish List

Qty

$ 4,331.99 USD

Add to Wish List

This product is crafted from high-quality stainless steel, with the front part of the downpipe cast in Akrapovič’s in-house foundry. A sporty 300 cpsi catalytic converter is integrated into the downpipe, with the heat insulation made of stainless steel and a flexible tube incorporated into the middle section. It delivers a pure racing sound, full of emotion and adrenalin-inducing enjoyment, and great feedback at high revs, all without unwanted drone.

Show More Show Less

19" APEX VS-5RS Staggered Wheel Set - Pick Your Finish

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19627054

Part#: VS5RS199H102538

Ships in 5 Business Days

Starting at $ 3,236.00 USD

Add to Wish List

Starting at $ 3,236.00 USD

Add to Wish List

Forged wheels provide a weight reduction while having a stronger wheel for shaving down those lap times! 19x9 Et25/19x10 ET38 5x112 66.6CB The best wheels to come to market at an even better price. These forged Sprint Line wheels have so many benefits why would you ever buy another wheel. VS-5RS wheels start off as a blank profile made specifically by Apex wheels, with about 10,000 metric tons of pressure the aluminum starts off as a robust metal eliminating porosity and improving the structure of the wheel to start off as strong as possible. Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 2x 19x9 ET25/2x 19x10 ET38 APEX VS-5RS Forged BMW Wheels in your choice of finish! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

7 pc. 3/8" Dr. Spark Plug Socket Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641915

Part#: 8845D

Ships in 6 Business Days

$ 141.99 USD

Add to Wish List

Qty

$ 141.99 USD

Add to Wish List

Complete set of spark plug sockets.

BMW G8X Akrapovic Tail Pipe Set - Classic Carbon Design

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:24444445

Part#: TP-CT/68

In Stock at Vendor

$ 2,215.99 USD

Add to Wish List

Qty

$ 2,215.99 USD

Add to Wish List

BMW G8X Akrapovic Tail Pipe Set - Classic Carbon Design offers an exceptional upgrade for those seeking both performance and aesthetics. These tailpipes are crafted by Akrapovic, renowned for their high-quality engineering and stylish designs. The Classic Carbon Design adds a distinctive, aggressive look to the vehicle, combining superior craftsmanship with performance benefits.

High-Quality Craftsmanship: Engineered by Akrapovic for unparalleled durability and performance.
Distinctive Style: Classic Carbon Design provides a sleek, aggressive appearance.
Enhanced Performance: Designed to optimize exhaust flow and improve overall vehicle performance.
Easy Installation: Direct fit for BMW G8X models, making installation straightforward with no modifications required.
Premium Materials: Made from high-quality carbon fiber for both durability and lightweight performance.

Show More Show Less

Mechanics Folding Mat

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:378231

Part#: RMAT6

Ships in 10 Business Days

$ 62.99 USD

Add to Wish List

Qty

$ 62.99 USD

Add to Wish List

This Mechanic's Folding Mat from Race Ramps saves your knees and keeps you dry and clean while working on your vehicle. Features convenient cut-out handles for easy transport - not only is this mechanic's mat stain and water resistant, but it is easily cleaned and will not mold or stain.

Show More Show Less

Akrapovic Titanium Exhaust Suite - G80/G82 M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3018050

Part#: BM/T/21H

In Stock at Vendor

Starting at $ 12,114.98 USD

Add to Wish List

Starting at $ 12,114.98 USD

Add to Wish List

Akrapovic is the first to market with the new G80/G82 Exhaust Suite. This exhaust suite has a variety of options from Downpipes, Center Section, Tip Style, Sound Kit, and Diffusors to help you get the configuration that meets your needs.

Show More Show Less

Race Ramps - Car Trak-Jax with Stops

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:642114

Part#: RR-TJ-S

Ships in 10 Business Days

$ 141.99 USD

Add to Wish List

Qty

$ 141.99 USD

Add to Wish List

Trak-Jax ramps were inspired by an auto-crosser who didn't want to buy a new high-priced, low-profile jack just to change his tires at the track. Lightweight and portable, they go where you go.

BMW G8X M2 M3 Akrapovic Tail Pipe Set - Octagonal Carbon Design ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:28537478

Part#: TP-CT/69

In Stock at Vendor

$ 2,391.99 USD

Add to Wish List

Qty

$ 2,391.99 USD

Add to Wish List

The pioneering octagonal form, meticulously crafted from lightweight titanium and enhanced with a carbon-fiber outer layer, harmoniously accentuates the car's lines. Alternatively, for enthusiasts of a classic look, there's the enduring cylindrical design, likewise fashioned from top-tier materials. These refreshed BMW tailpipes by Akrapovič cater to diverse tastes while upholding exceptional craftsmanship standards.

Show More Show Less

Race Ramps - XTenders For 67" Car Ramps

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641850

Part#: RR-EX-14

Ships in 10 Business Days

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

xtenders for 67" race ramps – 6.6 degree approach angle

Race Ramps - 10" High Crib Cruisers

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641842

Part#: RR-CC-10

Ships in 10 Business Days

$ 463.99 USD

Add to Wish List

Qty

$ 463.99 USD

Add to Wish List

10" lift height crib cruisers

Rear Carbon Fiber Diffuser - Gloss Carbon - G80/G82 M3/M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3018048

Part#: DI-BM/CA/9/G

In Stock at Vendor

$ 2,328.99 USD

Add to Wish List

Qty

$ 2,328.99 USD

Add to Wish List

The stunning carbon-fiber diffuser is offered as an option with the choice of a high-gloss or matt finish. It is a completely new design from the one that comes as standard on the car, and it gives the rear of the M8 a more aggressive and sporty feel. It shows off the Akrapovic tailpipes to their full extent and is a perfect accompaniment to the exhaust suite. Fitment notice: With Akrapovič diffuser, hands-free trunk-lid opening/closing sensor is not working.

Show More Show Less

14 Pc. Full Polish SAE Angle Head Wrench Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:642035

Part#: 9914A

Ships on Jul 21, 2026

$ 113.91 USD

Add to Wish List

Qty

$ 113.91 USD

Add to Wish List

Radius V-Groove design creates an anti-slip while also preventing round-off.

1/2" Drive 24mm Universal Impact Socket

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5229449

Part#: 224UMD

Ships on Jul 21, 2026

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Deep Impact Socket on a swivel.

3/8" Dr. Universal Impact Swivel Joint

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2528135

Part#: 3301D

Ships on Jul 21, 2026

5% off MSRP $ 26.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.89 USD

Add to Wish List

Qty

5% off MSRP

$ 26.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 24.89 USD

Add to Wish List

Designed for impact use

3/8" Dr. External Star Impact Socket Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5269512

Part#: 3670SED

Ships on Jul 21, 2026

$ 65.99 USD

Add to Wish List

Qty

$ 65.99 USD

Add to Wish List

CR-MO alloy steel for long life

Race Ramps - 67" Car Ramps XT - 2 Pc

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2423582

Part#: RR-XT-2

Ships in 10 Business Days

$ 492.99 USD

Add to Wish List

Qty

$ 492.99 USD

Add to Wish List

Designed to work with low profile and lowered cars, 67-inch XT Race Ramps provide 10 inches of lift for better access to the underbody of your vehicle.

2 Ton Long Lowrider Service Jack

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:385986

Part#: 6602LPD

Back Ordered

$ 704.99 USD

Add to Wish List

Qty

$ 704.99 USD

Add to Wish List

Designed to reach far under your vehicle with this long and low chassis

19" APEX VS-5RE Square Wheel Set - Satin Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:40478203

Part#: 5RE191122SBKT

Ships in 5 Business Days

$ 3,716.00 USD

Add to Wish List

Qty

$ 3,716.00 USD

Add to Wish List

Apex VS-5RE 19x11" ET22 Square Wheel Set The VS-5RE is the forged Enduro version of our popular VS-5 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Sharing a similar split five spoke layout to our popular Sprint Line VS-5RS, the all new VS-5RE was designed to prioritize both strength and stiffness. The reality is that most enthusiasts and racers benefit far more from increased strength than they would from a small decrease in weight. The VS-5RE and the Enduro line as a whole was introduced to give the enthusiast community the choice to choose what's best for their application. In our pursuit of absolute strength, the Forged VS-5RE was given dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a substantially reinforced outer lip. When all put together, the VS-5RE is rated at an impressive 2100 lb max load. A major increase over its Sprint Line counterpart sitting at a 1600 lb load rating. To achieve this level of strength, our engineers added a considerable amount of material to the areas where it matters most. This does come with a bit of a weight penalty, however a host of weight saving measures have been implemented to minimize its effect. Deep spoke scalloping is utilized to shave material from the sides of spokes without compromising strength. Outer lip pocketing, a feature only seen on the Enduro Line within the Apex catalog, does away with excess material on the outer lip between each spoke. Our aim is for the Enduro VS-5RE to become the wheel of choice for anyone who appreciates the benefit of strength and stiffness over small weight savings. One must ask themselves how much faster will they truly be by dropping a few pounds of rotating mass and is it worth the trade off of losing confidence that your wheels will hold up lap after lap. Wheels lacking in stiffness flex under load, leading to lost camber during demanding cornering. Ultra lightweight wheels look great on paper, but they could cost you in the form of a lost podium or high cost of replacement. Whether you’re a hardcore racer or an enthusiast who appreciates great engineering, the VS-5RE is the answer.

Show More Show Less

Race Ramps FlatStoppers Set - 4 Piece

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:378244

Part#: RRFS

Back Ordered

$ 271.99 USD

Add to Wish List

Qty

$ 271.99 USD

Add to Wish List

Race ramps give you an easy way to get your car in the air without jacks or boards. Especially with lowered vehicles, Race Ramps allow you to get your car off the ground even when a jack won't fit under your pinch welds.

FlatStoppers® were developed to stop flatspots from forming on vehicles stored for longer than 30 days at a time. FlatStopper's concave depressions should be used on a flat surface to prevent tire flat spotting during storage - this disperses the weight of the car more evenly onto the tire.

Dimensions: 22.3" long x 3.5" high x 14" wide
Will accommodate tires up to 12" wide
FlatStoppers® won't scratch or otherwise damage floors, and won't rust

Show More Show Less

Race Ramps - 72" 2-Stage Car Ramps

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641838

Part#: RR-72-2

Back Ordered

$ 475.99 USD

Add to Wish List

Qty

$ 475.99 USD

Add to Wish List

72" race ramps – 6.8 initial to 10.8 final degree approach angle

Race Ramp Trak-Jax Ramps

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:557429

Part#: RRTJ

Back Ordered

$ 132.99 USD

Add to Wish List

Qty

$ 132.99 USD

Add to Wish List

Trak-Jax Ramps, Composite Foam, 3,000 lb. Capacity, 30.10 in. Length, 12 in. Width, 3 in. Height, Pair

Race Ramps - Rally Car Ramps

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641827

Part#: RR-30

Ships on Jul 16, 2026

$ 146.99 USD

Add to Wish List

Qty

$ 146.99 USD

Add to Wish List

30" RALLY RAMPS - 5" lift for 8" wide tires

Akrapovic Titanium Slip On Exhaust With Octagonal Carbon Fiber Tips -...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3018042

Part#: BM/T/21H-BC

In Stock at Vendor

$ 10,143.99 USD

Add to Wish List

Qty

$ 10,143.99 USD

Add to Wish List

Includes rounded Octagonal Carbon Fiber Exhaust Tips The exhaust tone is most noticeable as you move through the gears and accelerate, and this can be further controlled through the addition of the optional Akrapovic Sound Kit to provide increased aural pleasure. Akrapovic has achieved power gains of 10.9 HP at 6,000 rpm and torque increases of 10.3 lb/ft Torque at 6,000 rpm when tested on the Akrapovic dyno against a G80 M3 with a stock M Sport exhaust system for comparison.

Show More Show Less

Race Ramps - Car Scale Ramps - 2

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:642108

Part#: RR-SCALE-2

Back Ordered

$ 141.99 USD

Add to Wish List

Qty

$ 141.99 USD

Add to Wish List

The next time you reach for your racing scales, hold back on the jack and instead reach for this set of two Scale Ramps. They will save you time setting up, and provide 2.5 inches of height to get your car ready for positioning on your racing scales.

Show More Show Less

Race Ramps - XTenders For 56" Car Ramps

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641848

Part#: RR-EX-12

Back Ordered

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

xtenders for 56" race ramps – 6.6 degree approach angle

Race Ramps - 4" Car Lift Ramps

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Made to order - ETA of 4-8 Weeks from order date

T#:641846

Part#: RR-CLR-4

Back Ordered

$ 1,244.99 USD

Add to Wish List

Qty

$ 1,244.99 USD

Add to Wish List

4" car lift ramps – 3.9 degree angle approach

APEX Gloss Black Wheel Center Cap - BMW/GR Supra 5x112mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:28637252

Part#: HWAPXCAPSUP5112R

In Stock

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Oil Filter Socket 32mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5269518

Part#: 367132D

In Stock

6% off MSRP $ 17.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD

Add to Wish List

Qty

6% off MSRP

$ 17.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD

Add to Wish List

Make oil filter housing removal simple

19" APEX ML-10RT Forged Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:31788353

Part#: ML10199525112RKT

In Stock

$ 3,596.00 USD

Add to Wish List

Qty

$ 3,596.00 USD

Add to Wish List

19" APEX VS-5RE Square Wheel Set - Anthracite

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:40478202

Part#: 5RE191122ANKT

In Stock

$ 3,716.00 USD

Add to Wish List

Qty

$ 3,716.00 USD

Add to Wish List

Apex VS-5RE 19x11" ET22 Square Wheel Set The VS-5RE is the forged Enduro version of our popular VS-5 design. It features our highest load rating and our strongest lip, allowing it to withstand abuse, lap after lap. Features: Fully forged 6061-T6 aluminum Stronger 2100 lb. load rating Stiffer side-milled spokes Heavy-duty Enduro Spec inner lip Capless hub design to reduce weight Massive brake clearance Unmatched replacement program Lifetime structural warranty Independently tested Sharing a similar split five spoke layout to our popular Sprint Line VS-5RS, the all new VS-5RE was designed to prioritize both strength and stiffness. The reality is that most enthusiasts and racers benefit far more from increased strength than they would from a small decrease in weight. The VS-5RE and the Enduro line as a whole was introduced to give the enthusiast community the choice to choose what's best for their application. In our pursuit of absolute strength, the Forged VS-5RE was given dramatically thicker spokes, our thickest ever Enduro Spec inner lip, and a substantially reinforced outer lip. When all put together, the VS-5RE is rated at an impressive 2100 lb max load. A major increase over its Sprint Line counterpart sitting at a 1600 lb load rating. To achieve this level of strength, our engineers added a considerable amount of material to the areas where it matters most. This does come with a bit of a weight penalty, however a host of weight saving measures have been implemented to minimize its effect. Deep spoke scalloping is utilized to shave material from the sides of spokes without compromising strength. Outer lip pocketing, a feature only seen on the Enduro Line within the Apex catalog, does away with excess material on the outer lip between each spoke. Our aim is for the Enduro VS-5RE to become the wheel of choice for anyone who appreciates the benefit of strength and stiffness over small weight savings. One must ask themselves how much faster will they truly be by dropping a few pounds of rotating mass and is it worth the trade off of losing confidence that your wheels will hold up lap after lap. Wheels lacking in stiffness flex under load, leading to lost camber during demanding cornering. Ultra lightweight wheels look great on paper, but they could cost you in the form of a lost podium or high cost of replacement. Whether you’re a hardcore racer or an enthusiast who appreciates great engineering, the VS-5RE is the answer.

Show More Show Less

Apex ML-10RT 18x11 ET44 5x120mm 72.56mm in Race Silver

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:35492004

Part#: ML10RT1811ET44

Ships in 5 Business Days

$ 769.00 USD

Add to Wish List

Qty

$ 769.00 USD

Add to Wish List

The Forged ML-10RT is the answer for enthusiasts craving a wheel design that combines classic motorsport styling with modern monoblock forging technology. This wheel was initially developed in the shadows by one of our Senior Engineers exclusively for his BMW E46 M3 widebody race car, and after sharing photos of the prototypes on social media, we received an overwhelming amount of interest from the community to bring it to market. Just like our existing flagship motorsport designs, the ML-10RT was designed from the ground up by our team of in-house engineers and underwent the same extensive FEA analysis and third party testing. It’s made from the highest grade 10K ton forged 6061-T6 aluminum, and utilizes true motorsport blanks, which is a vital component in our ability to deliver vehicle-specific optimizations like maximum concavity, optimal spoke design and critical brake clearance. The end result is a perfect blend of weight savings, added stiffness and strength, all while staying true to the classic motorsport design language we all love. The ML-10RT also sports our reinforced Sprint Spec inner lip and a 1600lb (1650lb for Porsche applications) load rating, which is the same lip design and load ratings we use for our popular Forged Sprint Line.

Show More Show Less

19" APEX VS-5RS Staggered Wheel Set - Pick Your Finish

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19660137

Part#: VS5RS199511

Ships in 5 Business Days

Starting at $ 3,656.00 USD

Add to Wish List

Starting at $ 3,656.00 USD

Add to Wish List

19x9.5 ET25 19x11 ET40 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

6-Ton Jack Stands - Pair

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:386187

Part#: 1006D

Ships in 6 Business Days

$ 306.99 USD

Add to Wish List

Qty

$ 306.99 USD

Add to Wish List

These jack stands have steel base pads for superior stability

APEX Solid Gloss Black BMW Center Caps - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:639899

Part#: HW-APX-CAP-BLK

Ships in 9 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

19" Apex VS-5RS - Square Set - Pick Your Finish

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19627026

Part#: VS5RS191140Q

Ships in 5 Business Days

Starting at $ 3,716.00 USD

Add to Wish List

Starting at $ 3,716.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Staggered Setup 19x11 ET40 APEX VS-5RS Forged BMW Wheels On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

19" APEX SM-10 Square Wheel Set - Pick Your Finish

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19627034

Part#: SM10191140Q

Ships in 5 Business Days

Starting at $ 2,016.00 USD

Add to Wish List

Starting at $ 2,016.00 USD

Add to Wish List

19x11 ET40 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Show More Show Less

20" APEX VS5RS Square Forged Wheel Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19693195

Part#: VS5RS20108SQ

Back Ordered

Starting at $ 4,036.00 USD

Add to Wish List

Starting at $ 4,036.00 USD

Add to Wish List

20x10 ET8 APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Spring Line Forged wheels from Apex Wheels feature: Side-milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hub centric and built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If you are already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

19" APEX ML-10RT Forged Wheels - Set Of Four

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! Pre-Order: ETA December 2024

T#:31788352

Part#: ML10199525112AKT

Ships in 5 Business Days

$ 3,596.00 USD

Add to Wish List

Qty

$ 3,596.00 USD

Add to Wish List

18" APEX SM-10 Staggered Wheel Set - Pick Your Finish

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:19693156

Part#: SM10181011

Ships in 5 Business Days

Starting at $ 1,896.00 USD

Add to Wish List

Starting at $ 1,896.00 USD

Add to Wish List

Spring Line Forged wheels from Apex Wheels feature: Side milled spoke design to cut out excess material and gain wider and deeper spokes. Reinforced critical structure points to add inner lip strength and increase load rating. Weight optimized to balance strength and maintain a lighter design. Independently tested for rigorous JWL standards based on duration, impact, and total loading. High clearance barrel design for Big Brake Clearance. Paintless Knurled Beads that keeps your tire from slipping with sharp and maximized grip! Impact Socket friendly to support oversized race lugs and faster wheel changes with impact sockets. Laser-engraved specs to easily identify your wheel collection at home or in a hurry at the track! Wheel Specs: Square Setup 18x10 ET30 18x11 ET40 APEX SM-10 Forged BMW Wheels On top of all of these benefits that focus on the best user experience possible Apex Wheels goes one step further. These forged wheels are always hubcentric built for your select vehicle application, made to fit TPMS sensors and OE center caps to get a factory look with improved performance. This is a wheel you can depend on! Comes with a LIFETIME WARRANTY against material and workmanship defects and a 1 YEAR warranty on the finish of the wheels. If your already sold on these wheels there is one last final benefit that will boost your confidence to drive these wheels to the moon and back; Apex Wheels offers 50% OFF replacement wheels no matter the damage to make sure your favorite wheel setup can go on forever!

Show More Show Less

20" APEX ML-10RT Staggered Wheel Set - Brushed Clear w/ Machined Lip ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! Now available for Pre-Order!

T#:37993441

Part#: ML10RT201011BCKT

Ships in 5 Business Days

$ 4,236.00 USD

Add to Wish List

Qty

$ 4,236.00 USD

Add to Wish List

Introducing the ML-10RT, a forged wheel born from an engineering passion project and brought to life by the enthusiast community. Designed for those who demand both style and performance, the ML-10RT blends classic motorsport aesthetics with cutting-edge monoblock forging technology. Crafted from lightweight forged aluminum, the ML-10RT delivers exceptional strength, enhancing durability and handling. Its sleek multi-spoke design not only elevates your vehicle’s look but also ensures optimal brake clearance. Whether on the street or the track, this wheel is the perfect fusion of performance and style.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results