BMW Tools & Specialty Equipment for BMW G80 M3 S58 3.0L

BMW / MINI SCAN TOOL:

The BMW Service Engine Soon (aka Check Engine Light) has thousands of different meanings. Everything from low coolant messages, engine misfires, transmission temperatures, light bulb failures, brake pad replacement, and so much more. The sophisticated electronics are throughout the car. Isn't it time for a BMW scan tool that can keep up with all of your DIY needs? We think we've found the one - the DIY BMW diagnostic tool that trumps them all. The Schwaben BMW elite scan tool.

Not all diagnostic scan tools are the same. The cheap ones you find at catalog outlet stores are generic and give you generic information (sometimes not even that). BMW actually has very specialized diagnostic systems that they only share with dealers. The factory diagnostic tools require specialized programs on dedicated laptops that are a pain for the average DIYer to set up and use. The Schwaben BMW diagnostic tool is designed specifically for BMW and MINI. It's not generic and packs some serious features in its small case. We've used this in our service department and were very impressed with the depth of its capabilities. It has features that only the factory ISTA/INPA programs have. Below is a partial list of its prime features -

• Works on BMW models from 1987-current*; Works on MINI models from 2002-current*
• Compatible with global OBDII / EOBD standards
• Reads and clears codes and turns off SES/CEL/MIL/DTC (BMW Powertrain codes, Chassis codes, Body codes, and CAN codes)
• Special troubleshooting functions to walk you through codes (like the BMW Test Plan)
• Check and activate electronic components like switches, relays, and actuators
• Records live sensor data
• Provides live data graphing
• Merges graphs for easy and intuitive diagnosis
• Displays freeze frame data
• Create a custom data stream
• Reads and resets most adaptations
• Reads OBD Readiness
• Does active tests on systems and components*
• Performs special functions, coding, security access*
• Code and program replacement control units
• Supports all 10 OBDII test modes
• Resets oil service light
• Sets inspection 1, 2 service intervals (manual or automatic)
• Sets inspection mileage
• Deactivates and reactivates brake control system
• Retracts calipers for brake pad replacement on newer models
• Initializes the wear indicator if new pads installed
• Diagnoses Electronic Parking Brake caliper functionality
• Multilingual menu options and code definitions
• Memory card for data backup and software update
• Print feature
• Large TFT color screen and menu-driven operations
• Free life time updates

*Certain functions may be limited due to the requirement of a special factory access code or tools. While versatile, this scan tool covers a wide range of BMW models and platforms and it cannot be a catch-all tool for every job. Some functions may not be available but will be reviewed in future updates.

DIGITAL CIRCUIT TESTER:

Embark on a new level of circuit testing with the Schwaben Digital Circuit Tester With Test Probes. Whether you're a seasoned professional or a dedicated enthusiast, this tool equips you with the confidence and precision needed for intricate diagnostics. And with our LIFETIME REPLACEMENT program, you can rest assured that you've found the ultimate circuit tester.

Features:

• Versatile Voltage Compatibility: Seamlessly navigate 6, 12, and 24V systems, offering comprehensive diagnostics for various setups.
• Trusted CE Approval: Prioritize safety and accuracy with CE Approval, allowing you to confidently undertake complex circuit assessments.
• Extended Reach: Effortlessly maneuver through testing scenarios, even in challenging areas, with the coil cord's 12-foot extension.
• Pinpoint Accuracy: Eliminate guesswork with the real-time, precise voltage readings displayed on the digital screen, facilitating well-informed decisions.
• Intuitive Power and Ground Indication: Streamline your testing process using vibrant red (power) and green (ground) LCD indicators for swift and accurate connections.
• Universal Compatibility: Seamlessly integrate with a wide range of circuit testing equipment thanks to the standard 4mm banana jacks on the probes, offering hassle-free use alongside your existing tools.

Includes:

• Digital circuit tester
• Piercing probe
• Long probe
• Small probe

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Male & female quick-connect fittings conveniently connect the leader hoses to the long hoses, making it easy to assemble and disassemble QuickJack after the simple one-time setup.

Each flush-face, zero-leak fitting is designed to prevent hydraulic oil or ATF from leaking, ensuring your frames function properly at all times.

Male fitting does NOT attach to QuickJack power unit.

Compatible with all SLX and TL models.

PRESSURE BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

FLUID CATCH BOTTLE:

keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

MAGNETIC FENDER COVER:

Protect your finish when working under the hood with a high quality Turner fender cover. Made from a synthetic leather layer with a goose flannelette backing for durability and protection. The Turner fender cover holds a tight grip to your fender or core support with four 9.5" magnets sewn into the top layer.

Features:

• Durable synthetic leather with the Turner logo
• Soft goose flannelette backing
• Four 9.5" integrated magnets

Dimensions:

•  Extra Long 20" x 47"

TELESCOPING LED MIRROR:

You are going to love this tool. This Schwaben telescoping lighted mirror can get you out of a jam when you need to look at something you can not see any other way. Use with or with out the mirror attached. Lighting can reflect on mirror to light at many angles. Great for finding missing parts beneath engine block or oil leaks.

Features:

• Handy pocket clip
• Pivoting quick attach mirror for perfect viewing at any angle.
• Extends up to 26 1/4" for hard to reach places.
• Collapsed length 6.5" without mirror attached, 9.5" with 
• High quality mirror provided a perfect reflection.
• Easy on and off. Turns on when extended and off when collapsed.
• 44,000 MCD brightness.
• Long life span up to 100,000 hours on LED bulb.
• Operates on 3 AG3/LR41 batteries 
• Includes batteries

TELESCOPING MAGNET:

This Schwaben telescoping magnet is a great addition to any tool box. Magnet is rated to pickup 3.5 lbs. Stainless steel shaft is 7" collapsed and 26" extended. Magnet is encased in a aluminum sleeve to help prevent side of magnet from sticking. Cushion grip rubber handle works great with dry or oily hands.

MAGNETIC PARTS TRAYS:

Stop losing nuts, blots, and screws. The Schwaben magnetic parts tray has a large 4-3/8 inch diameter stainless steel bowl with a rubber-coated magnetic base that won't mar painted surfaces.

Attach the tray to any ferrous metal on the vehicle, and toss in your steel fasteners as you remove them. The magnet holds them safely in place until you are ready to use them again. Works right side up or inverted for under-car repairs.

A simple, effective solution to a common problem.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

This kit will improve your tool box by adding 2 sets for the price of 1: A combination wrench set with a scraper, hook, and pick set!

COMBINATION WRENCH SET:

Quality combination wrenches are a must when doing any kind of automotive work.

Features:

• A complete set from 8 to 19 mm 
• Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
• Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
• Includes sturdy wrench holder for easy storage

SCRAPER, HOOK, AND PICK SET:

Some of the most popular uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips. This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

• 3" Blade MINI Awl, 90°, Hook, and Curve
• 6" Blade Awl, 90°, Hook, and Curve
• 6" x 1" wide scraper

Everything in this kit comes with LIFETIME REPLACEMENT.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

PADDED CREEPER:

Having a creeper can make working under the car much easier and more comfortable, roll in and out, padding, and keeping those clothes a bit cleaner. 

 Features:

• Thick fully padded leatherette cover.
• 40" long with heavy-duty metal support frame.
• 1"" steel tube frame.
• Four position adjustable headrest.
•  Six 2 1/2"oil-resistant rollers.
• Powder coated frame to resist rusting.
• Overall dimensions: 17" x 40" X 4"
• Ground clearance: 1-1/2"
• Ball bearing swivels on wheels.
• 250lb capacity.

PADDED CREEPER SEAT:

This rolling creeper seat is the  ideal height for many jobs. If you are working on the lower half of your car, this seat is a must have. Brakes, wheels, waxing, washing and more. 

Features:

• 2-1/2" thick padded leatherette seat.
• 14" high. x 14" wide x 20" long.
• 1" steel tube frame.
• Divided tool tray below seat.
• Four 2" wheels.
• 2-1/2" ground clearance.
• Ball bearing swivels on all wheels.
• 250 lb capacity.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

EXTRACTOR:

The Schwaben 6.5 Liter Extractor empowers you with swift, hand-operated fluid extraction. Complete with two tubes of varying diameters to suit your unique needs, this system's vacuum release button guarantees seamless operation. Clearing 6.5 Liters (6.8 qts.) of fluid in minutes, it preserves a spotless, oil-free workspace. Its ingeniously designed pour spout ensures mess-free fluid disposal.

Features:

• Stability First: Equipped with a flip-out foot for steady usage, delivering precise extraction.
• Organized Efficiency: Integrated hose storage streamlines your extraction process.
• Perfectly Sized: A 41" main tube (3/8" OD) and two 35" extension tubes (1/4" and 3/16" OD) ensure versatility across applications.
• Beyond Extraction: It doubles as a brake bleeder with the optional ES3248036 Brake Bleeder Hose.
• LIFETIME REPLACEMENT: Like almost all Schwaben tools, this fluid extractor is backed by our lifetime replacement program should anything go wrong!

ADAPTER:

This adapter hose allows a quick and easy suction thru the bleeder screw. This hose has included shut off valve in hose.  This will improve your extractor capabilities and make it even more of an all-in-one tool!

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Urethane Pinch-Weld Block - Set provides a superior solution for supporting vehicles on pinch-weld rails. Traditional rubber blocks can cause damage to delicate body rails due to excessive pressure points. These urethane pinch-weld blocks are engineered with a cross-cut slotted design, allowing versatile positioning either lengthwise or crosswise. They are ideal for safely supporting rocker panels or sheet metal body rails, particularly those that have degraded from corrosion over time.

• Specially formulated urethane rubber for durability
• Deep bilateral slots accommodate virtually all pinch weld frames
• Versatile positioning: lengthwise or crosswise
• Water, chemical resistant, and 100% weatherproof
• Single-piece construction ensures a superior hold
• Dimensions: 3.9” (L) x 2.9” (W) x 2.4” (H)

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 3" tall x 3" wide

3/8-INCH DRIVE LONG FLEX HEAD RATCHET:

This professional quality flex ratchet features a fine satin finish designed for durability and easy clean up. Special designed 72T gear mechanism uses only 5 degree of handle movement between gears. This is  especially useful in tight areas. Flex head has 7 detent positions in a 180 degree swing. Push button release holds socket tight until you are ready to release.  No more dropped sockets. Ratchet is a full 290mm ( 11") long for extra leverage.

Part of our LIFETIME REPLACEMENT PROGRAM

1/2-INCH DRIVE LONG FLEX HEAD RATCHET:

This 1/2" drive flex head ratchet features a fine satin finish designed for durability and easy clean up. Special designed 72T gear mechanism uses only 5 degree of handle movement between gears. This is  especially useful in tight areas. Flex head has 9 detent positions in a 180 degree swing. Push button release holds socket tight until you are ready to release.  No more dropped sockets. 

Part of our LIFETIME REPLACEMENT program

This 3/8-inch drive kit includes a Long Flex Head Ratchet with two FREE socket sets: A 3/8-inch drive 6 Point Socket Set AND a 3/8-inch drive Long Torx Socket Set.

3/8" DRIVE LONG FLEX HEAD RATCHET:

A professional quality flex ratchet features a fine satin finish designed for durability and easy clean up.

Features:

• Special designed 72T gear mechanism
• 5 degree of handle movement between gears 
• Flex head has 7 detent positions in a 180 degree swing
• Push button release holds socket tight until you are ready to release
• Ratchet is a full 290mm ( 11") long for extra leverage.

3/8" DRIVE 6 POINT SOCKET SET:

A satin chrome finish with a knurled ring around socket body, the knurling allows for a better grip when hands and sockets are covered in oil or grease. All sockets feature a radius in the corners for superior torque to the sides of the fastener, not the corner. Complete size coverage.

Includes:

• 8mm
• 9mm
• 10mm
• 11mm
• 12mm
• 13mm
• 14mm
• 15mm
• 16mm
• 17mm
• 18mm
• 19mm

3/8" DRIVE LONG TORX SOCKET SET:

The Schwaben 8 Piece 3/8" drive Long Torx Socket set encompasses the essential sizes prevalent in modern automobiles. These sizes are commonly encountered in recent car models. Each socket in the set boasts a substantial 110mm length, facilitating access to challenging-to-reach fasteners.

Packaged securely within a robust blow-molded case, all eight sockets maintain a 3/8" drive compatibility. The sizes are clearly imprinted on both the blade and socket, ensuring effortless identification at a mere glance.

Set Features:

• T25 Torx
• T27 Torx
• T30 Torx
• T40 Torx
• T45 Torx
• T50 Torx
• T55 Torx
• T60 Torx
• Blow molded storage case

LIFETIME REPLACEMENT on all items in this kit!

BRAKE CALIPER PISTON TOOL SET:

The Schwaben 18-piece disk brake retractor tool kit screws brake caliper pistons back into their bores to make room needed for new brake pads. An essential tool for working on calipers with threaded pistons, the kit comes with both right-hand and left-hand thread screw jacks, press plate, and 15 different diameter press disks to fit a wide variety of vehicles, both import and domestic, including Audi, BMW, Ford, GM, Honda, Mazda, Mitsubishi, Subaru, Toyota, Volkswagen and others.

Made of 100 percent chromalloy steel for strength, durability, and long service life.

PROTECTA SOCKET SET:

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

CALIPER HOOK SET:

• Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.
• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Brake services are now easier and more comfortable with this limited-time Doorbuster package! Featuring the Schwaben Mechanic's Folding Ground Pad and 3-Liter European Pressure Brake Bleeder, this package allows you to easily bleed your brakes by yourself without having to hurt your knees or back.

SCHWABEN MECHANIC'S FOLDING GROUND PAD
Make your favorite spot the most comfortable. The hard pavement can be brutal when spending time under your car, make more comfortable so there's no rushing when getting the job done.

Features:

•  Resists oils and fluids.
•  High density foam.
• Folded size is 17"W x 28"L. Unfolded is 17"W x 47"L
• Pad is apx 1-1/2" thick. Headrest is apx 3" thick

SCHWABEN 3-LITER EUROPEAN PRESSURE BRAKE BLEEDER
We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

WRENCH SET:

Quality combination wrenches are a must when doing any kind of automotive work.

Features:

• A complete set from 8 to 19 mm 
• Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
• Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
• Includes sturdy wrench holder for easy storage

INDEXING PRY BAR SET:

Having an adjustable pry bar really comes in handy when working in tight spaces as well as making seal replacement much easier.

Features:

• Three hardened alloy metal bars in 10, 12, and 15 inch lengths, with knurled, non-slip handle grips.
• Push button release at pry bar pivot allows the pry head to rotate through a wide arc and lock in place again when the button is released.
• Packaged in a handy molded case for portability and easy organization.

100 PIECE BIT SET:

All the right bits in one box. The perfect assortment to keep the job going.

Features:

• 10 fractional SAE hex, 9 Torx® tamper-proof, 9 Torx®
• 9 Metric hex bits, 9 slotted bits, 8 Pozi-drive, 8 Phillips, 4 square-recess, 4 tri-wing
• 3 spline, 3 Torq, 3 clutch, wing-nut driver, magnetic bit holder and socket bit holder
• Made of hardened Chrome Vanadium steel for years of dependable use
• Packaged in a handy blow molded case with individually marked bit slots for easy organization

6 PIECE SCREWDRIVER SET:

The Schwaben 6-Piece Screwdriver Set consistently proves its worth over time, delivering exceptional performance across a multitude of tasks. Forged from the unyielding strength of nickel chrome moly, these tools are purpose-built to endure the challenges of consistent use, standing as unwavering companions for a wide spectrum of tasks. Our dedication to your satisfaction is solidified through our LIFETIME REPLACEMENT program, a testament to our promise of keeping this set at your side for as long as you need.

Features:

• Seamless Color Coding: Effortlessly transition between flat head and Philips head screwdrivers with the intuitive color-coded system. Enhance efficiency and eliminate any guesswork.
• Optimal Handling Comfort: Engage in tireless operation with ergonomically designed handles that offer both comfort and precision, especially for intricate tasks.
• Organized Storage: Tucked within a molded tray, these frequently used screwdriver sizes are incredibly portable and thoughtfully arranged, eliminating the frustration of rummaging through tool collections.
• Essential Variety: Painstakingly curated to cater to diverse needs, the set comprises a range of sizes suited for delicate assignments and robust ventures alike, effectively tending to all your requirements.

Includes:

• Molded Tray
• 5.5x100mm flat head screwdriver
• 6.5x150mm flat head screwdriver
• 8x175mm flat head screwdriver
• #1x75mm Phillips screwdriver
• #2x100mm Phillips screwdriver
• #3x150mm Phillips screwdriver

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Protective Wheel Saver Socket - 17mm is designed to safeguard your valuable rims from damage during removal and installation. Featuring a synthetic polymer sleeve and insert, this socket ensures that your rims remain free from scratches or signs of wear while unscrewing and tightening lugs.

• Protects Wheels: The synthetic polymer sleeve and insert protect both factory and aftermarket wheels from scratches and damage.
• Versatile Use: Suitable for painted, clear-coated, chrome, factory, and other wheel finishes.
• Durable Construction: The six-point design and large contact surfaces help distribute stress and prevent damage.
• Wide Compatibility: Fits all 1/2" drive sockets, tools, and air tools, making it ideal for home use as well as rugged enough for professional shop use.
• Corrosion-Resistant: Made from heavy-duty materials that resist rust and corrosion, ensuring longevity.
• Essential Tool: A must-have for any serious enthusiast’s toolbox or for use at the shop when servicing your vehicle.
• Fits Various Vehicles: 17mm size is compatible with most BMW, MINI, Mercedes-Benz, Audi, VW, 2020+ Supra, and other vehicles with 17mm lug nuts.

This rugged and compact socket is perfect for maintaining your wheels and ensuring they stay in pristine condition.