BMW Tools & Specialty Equipment for BMW G82 M4 S58 3.0L

Designed for precision and durability, the VIM Tools 10 Piece Half Cut Stubby Torx Driver Set offers an updated solution for Torx applications. This new version of the HCT1050 is now packaged on a green Magrail, delivering a streamlined organization system for your tools.

With sizes ranging from T10 through T50, each driver features a 1/4" square drive and a compact 3/4" overall length, perfect for tight spaces. Crafted from heat-treated S2 steel with a satin chrome finish, these drivers ensure long-lasting performance and corrosion resistance.

Key Features:

• Wide Range of Sizes: T10 through T50 to cover various applications.
• Compact Design: 1/4" square drive with 3/4" overall length for hard-to-reach areas.
• Durable Build: Heat-treated S2 steel for enhanced strength and durability.
• Satin Chrome Finish: Corrosion-resistant and easy to clean.
• Half Cut Design: 1/2" cut drivers offer precise fitment.
• Magnetic Organization: Packaged on a green Magrail for convenient storage.

Includes:

• T10 (HCT10-04)
• T15 (HCT15-04)
• T20 (HCT20-04)
• T25 (HCT25-04)
• T27 (HCT27-04)
• T30 (HCT30-04)
• T40 (HCT40-04)
• T45 (HCT45-04)
• T47 (HCT47-04)
• T50 (HCT50-04)

When it comes to the torque found on axle nuts you're already looking at using a breaker bar or impact gun not to mention the corrosion collected over the years. The safest approach is using impact socket, since they are built with the strength needed to avoid breaking under pressure.

Features:

• Heavy duty ½ inch-drive sockets and drivers have extra thick alloy steel walls, and take a beating that would destroy normal sockets
•  Durable black oxide coating wipes clean easily and resists rust
• Contains three 12-point sockets for a sure grip on the most common sized axle nuts, plus three hex drives for removing common hex-head plugs and fasteners
• Conveniently packaged in a blow molded case, this set will please the most demanding professional technician or discriminating prosumer

Kit includes:

• 30mm, 32mm, and 36mm - 12-point axle nut sockets - ½" drive

• 14mm, 17mm, and 19mm hex head drive axle shoulder bolt sockets - ½" drive

Commonly used when replacing axle shaft boots.

Features:

• Crimp and flatten design
• Produces a clean factory style crimp
• Limited Lifetime Warranty

When dismantling a suspension strut sometimes the securing nut can be difficult to access and the central strut itself needs to be held still while the nut is undone. This new Shock Absorber Tool Kit is designed to overcome these problems and make the job quick and easy.

The go-through design of the sockets and ratchet design allows the strut lock extensions to go right through the middle of the ratchet and socket. Five different strut lock extensions are included, to fit a variety of applications. Seven go-through deep sockets (16, 17, 18, 19, 21, 22 and 24mm) are included, plus a sliding T-bar.

Once the spring is compressed and the top plate is free, simply choose the correct strut lock extension and socket. Then fit the socket and the ratchet handle, and fit the strut lock straight through. The central strut is held steady, and the securing nut is quickly removed.

Specifically designed for repairing and replacing shock absorbers and struts
Contents: 7 - Go Thru' deep sockets: 16/17/18/19/21/22/24mm
3 x 1/2"D Hex bits: 6mm/7mm/8mm,
1 x sliding T-bar 1/2"D,
2 x slot bit sockets 5 x 8mm, 6 x 8mm x 1/2"D
Also includes 1 x 21mm Hex Go Thru' ratchet
Packed in a blow mold case for easy storage
For California Prop 65 warning see: www.P65Warnings.ca.gov.

The impact driver is a fast and effective way to remove tight or corroded screws and bolts, reducing the chance of rounding off--or rounding out--the fastener head. Insert a slotted or Phillips head screwdriver bit into the driver.

For stubborn bolts, remove the black screwdriver bit adapter head, and replace it with any 3/8 - inch drive socket.

Features:

• Impact driver tool with red rubber grip 
• Four screwdriver bits (2 Phillips; 2 slotted) 
• 3/8 - inch drive bit holder

• Tough and rigid expanded polystyrene foam (EPS) with a load rating of 1,500lbs per wheel (almost twice what the normal corner weight would be on a 3-series BMW)
• 12" height X 12" width with minimal compression under load
• Light weight with each block weighing less than 6lbs and with a handy strap for carrying or hanging
• Curved cradle for the tire to sit inside
• Non-skid surface that won't scratch your floor

Looking for an alternative to your jack stands? With these wheel blocks you won't have to think twice about a jack stand scratching or denting the underside of your floor or the car falling off the jack stand. These work best when used with a floor jack under the subframe and the opposite axle wheels chocked. These are also a light weight and inexpensive alternative to the super-pricey plastic and metal ramps. They are resistant to most fluids and chemicals (but not solvents) and will never rust unlike metal ramps and blocks.

Also available in a 10" height.

The Schwaben 10 Piece 10mm Master Socket Set is a comprehensive socket solution brimming with robust 1/4 inch and 3/8 inch 10mm sockets, all neatly arranged on a single, convenient rail. Meticulously fashioned from premium chrome vanadium steel, this set is thoughtfully curated with your needs in mind, ensuring you always have the most sought-after socket sizes within arm's reach, regardless of their mysterious disappearance into the depths of your garage. And with our unparalleled LIFETIME REPLACEMENT program, rest assured this set will remain your steadfast companion, enduring even the toughest challenges.

Included in the Set:

• Twistable Socket Rail
• 1/4-inch Drive 6 Point Shallow Socket
• 1/4-inch Drive 6 Point Deep Socket
• 1/4-inch Drive 6 Point Impact Shallow Socket
• 1/4-inch Drive 6 Point Impact Deep Socket
• 1/4-inch Drive 6 Point Flex Socket
• 3/8-inch Drive 6 Point Shallow Socket
• 3/8-inch Drive 12 Point Deep Socket
• 3/8-inch Drive 6 Point Impact Shallow Socket
• 3/8-inch Drive 6 Point Impact Deep Socket
• 3/8-inch Drive 6 Point Flex Socket

The Schwaben Torx® set contains six drivers, all with center hole, suitable for use on both standard and tamper-proof Torx fasteners

Features:

• Each 3/8-inch driver shank is clearly stamped with the bit size, and has a ribbed circumference for improved grip when turning fasteners by hand
• High strength driver set is tough enough for regular use and includes T15, T20, T30, T40, T45, and T50 sizes
• Conveniently housed in a sturdy blow molded case for portability and easy organization.

This rolling creeper seat is the  ideal height for many jobs. If you are working on the lower half of your car, this seat is a must have. Brakes, wheels, waxing, washing and more. 

 Features:

• 2-1/2" thick padded leatherette seat.
• 14" high. x 14" wide x 20" long.
• 1" steel tube frame.
• Divided tool tray below seat.
• Four 2" wheels.
• 2-1/2" ground clearance.
• Ball bearing swivels on all wheels.
• 250 lb capacity.

3/8" DRIVE LONG FLEX HEAD RATCHET:

A professional quality flex ratchet features a fine satin finish designed for durability and easy clean up.

Features:

• Special designed 72T gear mechanism
• 5 degree of handle movement between gears 
• Flex head has 7 detent positions in a 180 degree swing
• Push button release holds socket tight until you are ready to release
• Ratchet is a full 290mm ( 11") long for extra leverage.

3/8" DRIVE 6 POINT SOCKET SET:

A satin chrome finish with a knurled ring around socket body, the knurling allows for a better grip when hands and sockets are covered in oil or grease. All sockets feature a radius in the corners for superior torque to the sides of the fastener, not the corner. Complete size coverage.

Includes:

• 8mm
• 9mm
• 10mm
• 11mm
• 12mm
• 13mm
• 14mm
• 15mm
• 16mm
• 17mm
• 18mm
• 19mm

LIFETIME REPLACEMENT on all items in this kit!