Turner Motorsport for BMW G87 M2 S58 3.0L

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole - drain kit included!
• Universal mounting kit

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Among the many reasons enthusiasts flock to the S58 is its unmistakable exhaust character. BMW’s twin-turbocharged inline-six delivers a fierce, motorsport-inspired snarl at wide-open throttle—yet the factory mid-section muffles much of that personality. The stock resonator and restrictive flow path tame the soundtrack, muting the aggressive tone your G87 M2 is capable of producing.

Turner Motorsport set out to change that. Their Resonator Delete transforms the factory system with a direct bolt-on mid-section engineered to free both sound and performance. By removing the bulky OEM resonator, integrating a true x-pipe, and shedding roughly 5 lbs of unnecessary weight, this upgrade enhances exhaust scavenging, sharpens throttle response, and unleashes a deeper, more engaging tone. Best of all, it retains full compatibility with the OEM downpipes and valved rear muffler—delivering a noticeable sound improvement while preserving factory functionality and easy reversibility.

Features:

Deeper, more aggressive exhaust note with added character and minimal drone

X-pipe design promotes efficient exhaust scavenging for improved flow

Maintains factory valved muffler operation and OEM-plus refinement

Approximately 5 lb weight reduction vs. the stock center resonator

Brushed 304 stainless steel construction with clean TIG-welded seams

Design:

1.25 mm-wall brushed 304 stainless steel tubing

76.2 mm (3") diameter

304SS sleeve-style and Accuseal clamps with slip-joint adjustability

Installation:

Installation is as easy as cutting your factory exhaust, raising the new center resonator delete into position, and clamping. Click HERE for Installation Instructions. Product Development:

Our Resonator Delete/X-Pipe was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Upgrade the rear styling of your BMW G87 M2 with the Turner Motorsport Carbon Fiber Rear Diffuser. Specifically engineered for the G87 platform, this carbon fiber diffuser enhances factory body lines with a more aggressive, motorsport-inspired appearance while maintaining a clean OEM+ look. Designed in-house using state-of-the-art 3D laser scanning and CAD technology, ensuring precise fitment and seamless integration with the factory rear bumper, mounting directly to existing locations with no modifications required.

Constructed from premium, hand-laid 2x2 twill weave carbon fiber and autoclave-cured epoxy resin, this lightweight BMW M2 carbon fiber diffuser delivers exceptional strength, durability, and a high-quality finish that complements both stock and modified vehicles. The design closely follows the lower contour of the OEM bumper, adding depth and visual impact while amplifying original styling cues.

Engineered to properly house quad 4.0-inch exhaust tips, this G87 M2 rear diffuser is fully compatible with both factory and aftermarket exhaust systems, ensuring a clean, functional fit and balanced rear-end appearance.

Features and Design:

BMW G87 M2 carbon fiber rear diffuser engineered for precise OEM fitment
Enhances factory body lines with an aggressive, OEM+ aesthetic
Designed to house quad 4.0" exhaust tips (compatible with stock and aftermarket exhausts)
Developed in-house using advanced 3D laser scanning and CAD modeling
Direct bolt-on installation using factory mounting locations and hardware
Constructed from hand-laid 2x2 twill weave carbon fiber
Autoclave-cured epoxy resin for strength, durability, and premium finish
Mimics and enhances the lower section of the factory rear bumper
Product Development:

Our Turner Motorsport Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team at Turner Motorsport. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)

Transform the look of your G87 with our Turner in-house designed ABS Rear Diffuser, meticulously crafted for a bold style upgrade. Engineered to seamlessly replace your factory diffuser, this upgrade transforms the rear profile with its striking deep profile and aggressive fin design, exclusively crafted by our engineers at Turner to command attention.

The diffuser's design accentuates the sleek contours of the G87, elevating its aesthetic appeal. Installation is effortless, requiring no modifications. Simply uninstall the current valance, align the tabs, and securely fasten the diffuser into place using the factory hardware and mounting points. Confirm a perfect fit by ensuring tab alignment, then effortlessly secure them with a gentle press for a flawless finish.

Features & Specifications:

Transformative
Designed to accentuate the G87 body lines
Mimics the lower section of the bumper with added character to amplify OEM features
Perfectly houses quad 4.0" exhaust tips for upgraded and factory exhausts
Designed in-house using state of the art 3d laser scanning and CAD technology for precision fitment
Direct fit utilizing factory clip locations and hardware
Crafted from lightweight, vacuum-formed UV-stabilized gloss black ABS polymer
Product Development:

Our Turner Motorsport Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team at Turner Motorsport. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Brushed Finish
Double Wall Construction
Slant Cut Style
Includes Stainless Steel Clamp

Performance Cat-Back Exhaust for pure unrestricted power and sound. This exhaust takes out all of the stop gates and pairs with the S58 for an iconic driving experience.

The G87 is no stranger to performance. Right out of the box the new M2 features rocket-like acceleration, and great handling and is even offered with a manual gearbox. With our Turner Performance exhaust you get a more engaged feeling improving the driving experience. Increased sound you can both hear and feel offers a direct line of feedback between you and the car. The added volume allows you to feel where you are in the power band without looking at your rpm gauge allowing you to feather the exhaust around turns and when shifting in your manual transmission. Along with the increased volume and feeling our exhaust features smooth transitions and improved flow for improved throttle response and sound on deceleration.

Our mission was to amplify the G87 with a proper Cat-Back exhaust system. To accomplish this goal, our engineers increased flow, reduced weight by 27 lbs, and delivered an exhaust system that captures the full unrestricted sound of the twin-turbo inline-6 S58 engine. The increase in flow was gained from dual 3.0" 304 stainless steel exhaust pipes that feed into a free-flowing rear section. We specifically designed this catback with flow in mind to ensure the exhaust would never be a restriction. Weight reduction is achieved by replacing the factory piping with lightweight 304ss for a more-than-modest weight advantage free from the added weight of the bulky factory muffler. The best part of the Race-Inspired Cat-Back is the capability to perform far beyond the point that the factory exhaust. All of this plus the direct fitment and straightforward installation leads to our Turner Race Inspired Catback exhaust being the clear answer in your mission to find the best exhaust for your S58-powered M2.

Part Design and Features:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
3.0"OD Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Weight savings over the OEM exhaust system:
OEM Catback (without tips): 60 lbs
Turner Stainless Race Catback (without tips): 33 LBS!
27 lb weight reduction!
Retains factory emissions
Kit Contents:

Dual 3" 304SS Exhaust piping from secondary cats.
X pipe replacing middle muffler sections for better sound, performance, and weight savings.
Straight through "Race-inspired" rear section
Optional Turner Slant Cut or Straight Cut Exhaust tips - 3.0" Inlet, 4.0" Outlet
Clamps and Hardware for an OEM+ install
Optional Exhaust Pipe Hanger Removal Pliers
- Click HERE for Installation Instructions -

Turner Motorsport Polo shirts are perfect to show your passion for the race team when you're not in the garage. Pick one up today!

Don't see your size available? Give us a call at 1.800.280.6966 - we have you covered.

Replace your factory, stamped aluminum radiator slam panel with a more lively gloss carbon fiber version for a look that sets your car apart from the rest.

Pop the hood! Say so long to the plain satin black radiator cover, our Turner carbon fiber engine cover looks so good along with the S58 and can transform the appearance of your engine bay in just minutes. One of the first things you do with a new car is take care of all the simple modifications to get the best out car without taking it apart. Remove your factory radiator slam panel and replace it with your new carbon fiber cover to check one modification off the list! Be the one who stands out from the other S58-equipped cars with their hoods open.

Our Turner Carbon radiator cover starts with a mold of the original component to get the best factory-form fitment possible. The cover is made from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. Be sure to check out the other incredible carbon fiber pieces Turner offers to enhance your G chassis!

Set of 2 universal 2.5" inlet to 4.0" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp