Flywheels for MINI

Experience a significant reduction in clutch chatter with the new Dual Mass Flywheel. This system eases the effort required during gear changes, providing a smoother shifting experience. Should any wear be detected during a clutch replacement, these systems, typically unresurfaced, are recommended for replacement. Featuring a 228mm diameter, this flywheel introduces a whole new shifting dimension to your car.

Benefits:

• Minimizes excessive clutch chatter
• Eases gear shifting effort
• Recommended replacement during clutch change if wear is identified
• Enhances shifting experience with a 228mm diameter

SPEC billet flywheels offer precise engineering tailored to specific driving environments, ensuring optimal performance for each vehicle. Made from high-quality steel and aluminum, SPEC flywheels boast a .001 machine tolerance, guaranteeing a flat seating surface for the clutch and smooth rotational qualities. These flywheels are essential for converting OE Dual Mass to Single Mass for compatibility with Spec Design clutch Kits.

Benefits:

• Precision engineering for specific driving environments
• Manufactured from high-quality steel and aluminum
• Flat seating surface for the clutch ensures smooth operation
• Compatible with Spec Design clutch Kits

The factory dual-mass flywheel in your MINI N14 was built with comfort in mind—absorbing drivetrain vibrations and smoothing shifts—but at the cost of performance. Weighing in at a hefty 28.3 lbs., the OEM flywheel adds excessive rotational mass, dulling throttle response, slowing acceleration, and complicating precise rev-matching. Worse yet, it's known to be unreliable in modified or tuned setups and expensive to replace when it fails.

This single-mass design from ECS Tuning weighs just 18.8 lbs. It cuts nearly 10 lbs. of rotational weight to significantly enhance throttle response, acceleration, and overall driving feel. Built for durability and spirited driving, it's the ultimate upgrade for enthusiasts who want to make the most of every gear change.

Key Features:

Precision CNC-machined from 4140 HT Chromoly Steel: Ensures outstanding toughness, consistent wear, and long-term durability.

Heat Treated and Tempered: Achieves HRC 28-32 for improved strength, stress relief, and dimensional stability—even at elevated temperatures.

Black Oxide Coated: Resists corrosion for long-lasting protection and a professional finish.

Precision Balanced: Exceeds OEM standards (G16, 175 g-mm) to ensure smooth, safe operation at all RPMs.

SFI 1.1 Certified: Tested and approved for extreme use—track or street.

Direct Fit for OE N14 Clutch Kits: Maintains compatibility with factory-style components for hassle-free installation.

Performance Benefits:

Substantial Weight Reduction

​OEM Flywheel: 28.3 lbs.

ECS Lightweight Flywheel: 18.8 lbs.

Net Savings: Nearly 10 lbs.

Faster Revving and Sharper Throttle Response: Reducing rotational mass translates into a more dynamic and responsive driving experience.

Improved Clutch Engagement and Longevity: Optimized step height delivers better clamp load and extends service life.

Ideal for Modified MINIs: Built to handle increased power and spirited driving with confidence.

Replaces MINI OEM Part #: 21207575069

Upgrade your MINI Cooper S or JCW 2.0L with the Lightweight Aluminum Flywheel weighing just 14 lbs from Clutch Masters. Engineered for performance, this lightweight flywheel enhances throttle response and overall driving experience.

• Lightweight design improves engine response
• Specifically designed for MINI Cooper S and JCW 2.0L models
• Enhances overall driving performance
• Durable aluminum construction ensures longevity

Upgrade your Mini's clutch system with JMTC's MINI Cooper S Solid Flywheel Conversion Clutch Kit, a superior alternative to the OEM dual mass flywheel and clutch kit. Engineered for durability and performance, this clutch and solid single mass flywheel replacement ensures reliable power transmission and smoother engagements. Benefits include:

• Direct replacement for OEM dual mass flywheel and clutch kit.
• Interchangeable with OEM clutch sets and components.
• Steel surface can be refinished on the steel flywheel; friction area can be replaced on the aluminum flywheel.
• Enhanced durability and reliability compared to OEM dual mass flywheel.
• Absence of catastrophic failures common in dual mass flywheels.
• Four times thicker friction surface area for better heat absorption and distribution.
• Longer lifespan and reduced risk of glazing the clutch.
• Suitable for street, track, and strip driving.

Features:

• Clutches made with Clutchtex Kevlar and Miba Ceramics.
• Extended life Ceramic clutch pad.
• Includes clutch disc, clutch disc centering tool, pressure plate, release bearing, pressure plate bolts, and steel flywheel.
• Kevlar clutch pads require break-in period; Ceramic pads fully mated in 10-20 miles.

JMTC recommends ordering an installation kit and a new master clutch cylinder for optimal performance and longevity of the clutch system.

The factory dual-mass flywheel in W11-powered MINI Coopers was designed with comfort in mind—minimizing drivetrain vibration and delivering smoother shifts. However, this focus on refinement comes at a performance cost. The hefty 27 lbs. of rotational mass dulls throttle response, slows acceleration, and makes rev-matching more difficult. Dual-mass flywheels are also known to be less reliable in tuned or modified setups and can be expensive to replace when they fail.

ECS Tuning developed their Lightweight Single-Mass Flywheel to address these issues with a performance-focused alternative. Weighing in at just 17 lbs., this flywheel sheds nearly 10 lbs. of rotating mass compared to the OEM unit—transforming throttle response, acceleration, and clutch feel for a more engaging and dynamic driving experience.

**This flywheel is to match with a factory type or aftermarket NON Dampened clutch kit!** MINIs factory set up engagement is dampened by the dual mass flywheel. This will be a little more aggressive engagement of the clutch over the stock factory set up as they system in not dampened!! Can be used from daily to the track days.

Key Features:

Manufactured from 4140 Chromoly Steel Heat-treated and tempered for exceptional strength, wear resistance, and thermal stability. Optimized Hardness (HRC 28–32) Ensures consistent performance and durability under extreme conditions. Precision-Balanced to G16 Standard (175 g-mm) Exceeds OEM balance requirements for smooth, high-RPM operation. Black Oxide Finish Provides effective corrosion resistance and a sleek appearance. SFI 1.1 Certified Validated for safe use in high-performance and racing environments. Direct Fit Engineered to work seamlessly with OE-style clutch kits designed for the W11 engine architecture. Kit Contents:

ECS W11 Lightweight Flywheel OEM LUK Clutch Kit OEM LUK Clutch Alignment Tool OEM LUK Release Bearing Genuine MINI Guide Tube Genuine MINI Flywheel Bolts (M10x48) Upgraded ARP Pressure Plate Screws (M9x15)

Put an end to annoying clutch chatter with this brand-new dual mass flywheel. When you install this system, you'll experience a significant reduction in the effort required when shifting gears.

It's important to note that these dual mass flywheels cannot be resurfaced. If any wear is detected during a clutch replacement, they should be replaced. This flywheel comes in a 228mm diameter, offering a whole new shifting experience for your car.

Upgrade your clutch system and enjoy smoother gear changes with this dual mass flywheel.