M7 Strut Reinforcement Plates 53-510101 are the ultimate solution for MINI owners facing the common issue of strut tower mushrooming caused by heavy impacts from shocks and low aspect ratio tires. Over time, MINI's shock towers can develop a convex shape, disrupting suspension alignment and leading to a noticeable pull to one side. The M7 Strut Reinforcement Plates (SRPs) address this problem by reinforcing the sheet metal and shock top plate, creating a durable surface that resists bending, even during hard impacts.

Designed specifically for the R50 Base Model Cooper, the R52 Convertible, and the R53 Cooper S, these SRPs are an essential upgrade for any MINI enthusiast. Constructed from CNC machined billet aluminum and black anodized for durability, the 1/2" (13mm) thick plates cover the entire surface of the strut tower, distributing loads evenly and providing peace of mind.

Whether you drive your MINI daily or push it to the limits on the track, M7 Strut Reinforcement Plates offer a cost-effective preventative measure against expensive suspension repairs. Easy to install in less than 20 minutes, the SRPs use the stock nuts for mounting and come with instructions that also guide you through fixing existing mushrooming.

• Prevents strut tower mushrooming
• Constructed from CNC machined billet aluminum
• Black anodized for long-lasting durability
• Covers the entire strut tower surface
• Designed for R50, R52, and R53 MINI models
• Easy installation with stock nuts
• Made in the USA

If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.

Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.

This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.

The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.

We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.

Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.

Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.

The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).

If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!

Please note:

• You cannot buy the SRPs and attach the cross-bar at a later time.
• The brace does not directly fit on the R50 and R52 Non-"S" Cooper due to limited hood clearance of the non-supercharged cars. It will fit but may push up on the hood slightly, requiring molding or cutting of the hood insulation after installation.
• Trimming of the underhood insulation material may be required to fully clear this brace. This is a very tight space.

For those who've owned or still own older-generation MINIs, the NM 22mm Solid Rear Anti Sway Bar is a game-changer. It's the ultimate solution for managing body roll in your MINI, significantly enhancing handling and steering input. In fact, it can provide performance improvements on par with, if not better than, installing lowering springs or coilovers.

Introducing the NM Engineering GT Rear Sway Bar in 25mm, now available to take your MINI's performance to the next level. This upgrade is perfect for aggressive urban driving, canyon carving, and track or autocross applications.

Key Features of NM Eng Anti Sway Bar:

• Mandrel bent chromoly heavy-wall tube for precise torsion motion.
• Forged ends with two adjustment mounting holes (not cheaply welded plates).
• Billet 7075-T6 aerospace-grade sway bar bracket.
• 90° Zerk fitting for easy re-greasing.
• Graphite impregnated urethane bushings.
• Glossy blue powder-coat finish.
• 3-way adjustable preload.

Note: It is highly recommended to use the NM Engineering Sway Bar Link kit with the GT Sway Bar for optimal performance.

Enhance your MINI's performance with the NM RSα progressive rate spring kits, delivering a more responsive ride, improved handling, and a lowered ride height. These springs are engineered with precise spring rates and manufacturing methods, offering an elevated motoring experience.

Key Benefits:

• Responsive ride quality
• Sharper handling characteristics
• Lowered ride height for improved aesthetics

Transform your MINI into a go-kart-like driving experience with NM Engineering's 22mm Solid Rear Sway Bar. This sway bar not only enhances your MINI's performance but also improves its handling dynamics, offering additional rear roll stiffness and five-position adjustability. The installation of this sway bar brings about significantly improved neutral handling characteristics.

Key Features:

• Aerospace-spec 7075 CNC machined, hard anodized bushing brackets for added durability.
• Billet brackets with grease fittings for convenient bushing maintenance.
• Low resistance, graphite impregnated urethane bushings.
• Machined ends and a glossy powder-coated bar for a complete package.

Please Note: The finish of this sway bar is Powder Coated NM Blue, and it includes the newly redesigned bracket kit. Users can purchase the bracket kit separately if they choose to update the superseded version.

M7 Speed Suspension Product for Generation 2 MINI Cooper Models (R55-R59)

M7 Speed proudly introduces a unique suspension product for the popular Generation 2 MINI Cooper models R55 through R59. These affordable vehicles are becoming the choice for many entry-level modifiers in the German performance car segment, and they are great for Rally Cross.

Engineered to transform the mild-mannered MINI into a more capable and versatile daily driver, this product is perfect for today’s lifestyle. Whether it's for spirited adventure motoring, weekend overlanding, living off the grid, or tackling pothole-riddled urban streets, the M7 Speed 2" Lift Kit makes it possible. By installing this lift kit, the MINI is elevated by 2 inches, plus an additional lift from larger diameter tires (up to an extra 1.5 inches). No additional modifications are required—simply bolt it in, perform a realignment, and enjoy! Add aftermarket wheels and larger tires to create a unique, durable, and practical vehicle that everyone will love.

The M7 Speed Stage 1 Kit includes everything needed for the transformation. This kit features precision-fabricated lift blocks and a set of MAXX-G heavy-duty adjustable front sway bar links. These shorter links are necessary to prevent suspension bind that can occur with stock-length sway bar links.

Stage 1 Kit Includes:

• 2" Lift Kit with high-strength assembly hardware (2 front riser blocks, 2 rear riser blocks)
• Set of MAXX-G Heavy Duty Adjustable Front Sway Bar Links
• Hardware kit with high-strength, proper-length bolts and new locking nuts

Features:

• Engineered using 3D CAD software and finite element simulation for proper fitment and safe, fail-proof performance
• CNC laser-cut parts
• Lightweight fabricated steel design
• Black urethane powder coating for corrosion protection and a quality appearance
• Designed for easy bolt-on installation, complete with all new high-strength hardware and installation instructions

MAXX-G Adjustable Sway Bar:

• Enhances cornering performance, provides bind-free suspension travel, improves suspension alignment, and overall chassis balance
• Features sealed and permanently lubricated forged steel ball stud & socket ends for easy installation
• Includes a military-grade aluminum adjuster sleeve with opposing RH & LH threads for simple length adjustments
• Replaceable link ends make maintenance easy

M7 Speed is the world leader in MINI adventure motoring, overlanding, and ultimate performance products. Renowned for exceptional customer service and product innovation, M7 Speed is dedicated to engineering and producing high-quality, easy-to-install aftermarket performance products. Located in Mooresville, North Carolina, also known as Race City USA, M7 Speed is at the epicenter of North American motorsports.

MINI F55 F56 F57 NM Billet Aluminum Tie-Bar – Blue enhances the rigidity of the MINI Cooper chassis, providing superior handling and steering response. Designed to minimize chassis flex during aggressive driving, this tie-bar helps maintain alignment and geometry, resulting in a more precise driving experience.

• Reduces chassis flex: Minimizes fore-and-aft and side-to-side movement during spirited driving.
• Improves steering response: Enhances handling and driving dynamics by maintaining proper alignment.
• Durable construction: Made from solid 6061-T6 aluminum billets for strength and precision.
• Optimized design: Features a 1" round tube with a 1/4" thick wall for the ideal balance of stiffness and weight.
• Secure mounting: Dual bolt design ensures a firm attachment, preventing movement and ensuring effectiveness.

Compatible with all Gen 3 MINI Coopers, including F56, F55, 2.0T, and 1.5T, and works with or without the DDC factory suspension option.

Crafted with a mandrel-bent chromoly heavy-wall tube, the NM Eng Anti Sway Bar ensures consistent diameter for precise torsion motion. Its forged ends with two adjustment mounting holes, billet 7075-T6 aerospace-grade sway bar bracket, 90° Zerk fitting for easy re-greasing, and graphite impregnated urethane bushing ensure durability and performance. The glossy blue powder-coat finish and 3-way adjustable preload make it ideal for aggressive urban driving, canyon carving, and track/autocross use.

Please note: The NM Engineering Sway Bar Link kit is recommended for optimal performance when used with the GT Sway Bar.

• Improved body roll management
• Enhanced handling and steering input
• Ideal for aggressive urban driving, canyon carving, and track/autocross applications
• Durable construction for long-term use

Improve Your MINI's Grip with the M7 Rear Chassis Brace!

Enhance your MINI's handling by stiffening its chassis with the newly redesigned M7 Rear Chassis Brace. This upgrade is crucial for maximizing tire grip, allowing your suspension components—such as springs, shocks, and sway bars—to function optimally and keep your tires in better contact with the ground, resulting in improved grip.

• Enhanced Handling: Achieve better handling performance on both the street and the track by adding the M7 Rear Chassis Brace to your MINI's chassis.
• Triangulated Design: The fully triangulated design ensures maximum stiffness and stability, providing enhanced control during cornering and maneuvering.
• Lightweight Construction: Crafted from lightweight materials used in race car construction, the M7 Rear Chassis Brace adds rigidity without compromising your MINI's agility.
• Easy Installation: Designed for hassle-free installation, this brace can be easily mounted to your MINI's chassis with basic hand tools, allowing you to hit the road or track in no time.

Upgrade your MINI's chassis with the M7 Rear Chassis Brace and experience a significant improvement in grip and handling.

Enhance your Mini's performance and cornering capabilities with M7 MAXX-G Adjustable Swaybar Endlinks. Designed for both lowered and raised Minis, these endlinks offer numerous benefits including symmetric cornering performance, bind-free suspension travel, better suspension alignment, and overall chassis balance. The forged and heat-treated alloy steel housings with sealed ball stud and socket design ensure durability and reliability even during aggressive driving. The adjustable length allows for precise chassis tuning and optimal grip and balance. Made in the USA, these endlinks are a must-have upgrade for any Mini enthusiast.

• Improves symmetric cornering performance
• Provides bind-free suspension travel
• Enhances suspension alignment and chassis balance
• Features forged alloy steel construction for strength and durability
• Adjustable length for precise chassis tuning
• Easy to install and adjust with simple hand tools

Upgrade your Mini's suspension with M7 MAXX-G Adjustable Swaybar Endlinks for optimal performance on the road or track.

Introducing the MINI R55+ NM Billet Aluminum Tie-Bar - Red

A stylish and functional upgrade for Mini enthusiasts. This tie-bar enhances the structural rigidity of the Mini R55+ chassis, providing improved handling and stability on the road. Crafted from high-quality billet aluminum, it offers durability and corrosion resistance for long-lasting performance. The vibrant red color adds a touch of style to your Mini's engine bay. Upgrade your Mini R55+ with this billet aluminum tie-bar for enhanced driving experience.

• Stylish and functional upgrade for Mini R55+ vehicles
• Enhances structural rigidity for improved handling and stability
• Crafted from high-quality billet aluminum for durability
• Corrosion resistance for long-lasting performance
• Vibrant red color adds style to your Mini's engine bay

Enhance your Mini's performance with the MINI R60 R61 M7 R60 R61 Rally Sport Suspension Kit - Stage 1. This Stage 1 suspension kit from M7 is designed to deliver improved handling and stability for an exhilarating driving experience.

• Specifically designed for MINI R60 and R61 models
• Provides enhanced handling and cornering performance
• Reduces body roll for better stability during aggressive driving
• Improves overall ride quality and comfort

MINI R55+ NM Billet Aluminum Tie-Bar - Blue

MINI R55+ NM Billet Aluminum Tie-Bar - Blue is the perfect upgrade for Mini R55 and newer models seeking improved stability and performance. Crafted from high-quality billet aluminum, this tie-bar offers superior strength and durability compared to stock components. With its stylish blue finish, this NM tie-bar adds a touch of customization to your Mini while providing enhanced chassis rigidity and responsiveness.

Key Benefits:

• Improved stability and performance for Mini R55 and newer models
• Superior strength and durability with billet aluminum construction
• Stylish blue finish adds a custom look to your Mini
• Enhances chassis rigidity for improved handling
• Responsive steering and precise control for an enhanced driving experience

Upgrade your Mini R55 and newer models with the MINI R55+ NM Billet Aluminum Tie-Bar - Blue to experience improved stability, performance, and aesthetics. Invest in this high-quality tie-bar to take your Mini to the next level.

Introducing the MAXX-G™ Performance Suspension rear anti-roll bars, also known as sway bars, tailored for the R60 Countryman and R61 Paceman. Engineered for MAXIMUM GRIP and MAXIMUM CORNERING G-FORCE, MAXX-G™ suspension components are designed to elevate the performance and thrill of your Mini. The ANTI-ROLL-KITs effectively reduce body roll, enhancing handling and cornering grip for an exhilarating driving experience. Key features include:

• Reduction of body roll through increased stiffness over stock bars.
• Improved handling and cornering grip in various driving scenarios.
• Shifts handling balance from understeer towards neutral for enhanced fun.
• Three sets of link connection points for precise handling adjustments.
• Made in the USA from military-grade 4130 chrome-moly alloy steel.
• Double-coated with durable HOT YELLOW powder coat for longevity.
• Includes high-performance urethane bushings, strap clamps, silicone grease, and locking split collars.

Complete your suspension upgrade with the MAXX-G™ ANTI-ROLL-KIT for unparalleled performance and driving pleasure.

M7 R60/R61 Monster Strut Tower Brace (STB)

A high-performance upgrade designed to enhance the handling and stability of your Mini R60/R61 model. Engineered by M7, a trusted name in Mini performance parts, this strut tower brace reinforces the chassis structure, reducing flex and improving cornering stability. Its durable construction and precise fit ensure long-lasting performance, while its sleek design adds a sporty aesthetic to your Mini. Experience improved handling and driving dynamics with the M7 R60/R61 Monster Strut Tower Brace.

• Enhances handling and stability
• Reinforces chassis structure for reduced flex
• Improves cornering stability
• Durable construction for long-lasting performance
• Sleek design adds sporty aesthetic

M7 Tuning J-Brace for R56 MINI Coopers

Elevate your Mini's performance with the M7 Tuning J-Brace, specially designed for R56 MINI Coopers equipped with the factory John Cooper Works intake. This brace enhances front-end stiffness, protects strut towers from mushrooming, and adds a stylish touch to your vehicle.

• Improves handling and stability
• Protects strut towers from damage
• Enhances the aesthetic appeal of your Mini
• Easy installation process
• Made from high-strength 6061-T6 aluminum alloy for durability

Note: The J-Brace has been slightly modified for the 2011-2013 model year MINI Cooper S for better clearance to stock parts. This brace does not fit the base model Cooper (non 'S' model) or the JCW GP2 model.

MINI R60 R61 M7 Rally Sport Suspension Kit - Stage 1

The ultimate upgrade for MINI enthusiasts seeking top-tier performance. Enhance your driving experience with improved handling and control, designed specifically for rally sport enthusiasts.

• Enhanced handling and control
• Specifically designed for rally sport enthusiasts
• Top-tier performance upgrade
• Tailored for MINI R60 R61 M7 models

Enhance your Mini's handling with the MINI R Chassis Aluminum Adjustable Control Arm Kit. This kit offers precise control over suspension geometry, allowing Mini R Chassis models to achieve optimal performance on the road or track. Crafted from lightweight aluminum, these adjustable control arms are designed for durability and agility, providing a customized suspension setup tailored to your driving preferences. Engineered to enhance cornering stability and steering response, they ensure a smoother ride and improved handling dynamics, making them ideal for enthusiasts seeking to elevate their Mini's performance capabilities.

• Allows precise adjustment of suspension geometry
• Lightweight aluminum construction for durability and agility
• Enhances cornering stability and steering response
• Customized suspension setup for improved handling
• Ideal for road and track enthusiasts

Upgrade your Mini R Chassis with the Aluminum Adjustable Control Arm Kit for enhanced performance and handling precision.