MINI F56 Dinan Coilover System offers the MINI driver unparalleled versatility for achieving optimal performance in any situation. This adjustable coil-over suspension system allows for customization, enabling configurations that range from factory-like comfort to maximum performance, or a combination of both. Whether used for daily driving or track performance, the improved suspension provides exceptional traction, enhancing confidence at higher speeds.

The Dinan Coil-Over System for F55/F56/F57 MINI models is engineered to deliver outstanding handling performance. It includes performance-tuned linear rate springs, adjustable front strut assemblies, and rear shocks with integrated bumpstops for reliable behavior. Key benefits include:

• Adjustable Ride Height: Up to 1.7" lower in front and 1.1" in the rear, with a recommended 0.75" (20mm) drop to maintain ride quality.
• Enhanced Handling: 93% stiffer front springs (336 lbs/in vs. 174 lbs/in) and 58% stiffer rear springs (336 lbs/in vs. 213 lbs/in) improve grip and reduce body roll.
• Customizable Comfort: 32 levels of rebound damping adjustment and threaded collars for precise height adjustments.
• Durable Construction: Corrosion-resistant materials and finishes for long-lasting performance.
• Improved Performance: Substantial reduction in body roll and increased handling capabilities.

Note: Not compatible with cars equipped with EDC/DDC.

You get the best of both worlds with this pair of Turner Motorsport adjustable sway bar links. We searched far and wide to find the hidden gem of swaybar links. You get the same quiet operation and long life as the stock links plus the strength and adjustability of rod-end style sway bar links.

With the wide range of suspensions and sway bars available today adjustable sway bar links can help you with many problems. Along with the ability to remove preload you can change the length to maximize sway bar geometry. Example: if the sway bar hoop comes too close to the steering rack, oil cooler, or under tray in its suspension travel you can adjust it by simply lengthening or shorting the adjustment rod. In some cases you may need a longer or shorter adjustment rod to achieve optimal geometry. We also offer these same links in other custom lengths (click here) that may not be specific to BMW chassis.

Features:

• Adjustable to neutralize preload on sway bar (balanced handling)
• The ability to set sway bar geometry and clearance
• Low friction ball joints
• High articulation
• Direct replacement for OEM sway bar links
• Watertight boot seal
• Ball joint is made by a world leader in ball joint technology, THK. THK's OEM Customers: BMW, Porsche, Ford, GM, Nissan, Honda, and Toyota

Turner Swaybar Link Specs:
TSU9912AF1: 220.00mm - 235.00mm / 8.66" - 9.25"
TSU4612AF3: 250.00mm - 265.00mm / 9.84" - 10.43"
TSU5012AF8: 280.00mm - 295.00mm / 11.02" - 11.61"
TSU9912A95: 290.00mm - 305.00mm / 11.42" - 12.00"

These adjustable sway bar end links can be used on a variety of BMWs. Please select your car below. Please note these end links do not fit non-M E36, except 325i/is produced before 6/1992.

If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.

Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.

This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.

The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.

We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.

Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.

Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.

The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).

If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!

Please note:

• You cannot buy the SRPs and attach the cross-bar at a later time.
• The brace does not directly fit on the R50 and R52 Non-"S" Cooper due to limited hood clearance of the non-supercharged cars. It will fit but may push up on the hood slightly, requiring molding or cutting of the hood insulation after installation.
• Trimming of the underhood insulation material may be required to fully clear this brace. This is a very tight space.

MINI R53 Loaded Front Left Strut offers a convenient, pre-assembled solution for replacing your front strut, spring, and strut mount. This fully assembled unit eliminates the need for special disassembling tools, allowing for a quick and straightforward installation with standard hand tools.

• Pre-Assembled Convenience: Saves time and effort by providing a complete front strut assembly that is ready to install.
• Easy Installation: Designed for a hassle-free replacement with standard hand tools, no special equipment needed.
• Recommended Pair Replacement: For optimal performance and safety, it is advised to replace struts in pairs.
• Durable Warranty: Backed by a 2-year or 30,000-mile warranty, ensuring long-term reliability and peace of mind.
• Stock Suspension: Maintains your vehicle's original ride quality and handling characteristics.

M7 Speed Suspension Product for Generation 1 MINI Cooper (R50-R53)

M7 Speed introduces a unique suspension product for the popular Generation 1 MINI Cooper models R50 through R53. These affordable vehicles are becoming the choice for many entry-level modifiers in the German performance car segment, and this product is great for Rally Cross.

Engineered to convert the mild-mannered MINI into a more capable and versatile daily driver, this kit is perfect for spirited adventure motoring, weekend overlanding, living off the grid, or navigating pothole-riddled urban streets. The M7 Speed 2" Lift Kit lifts the MINI 2" higher, plus an additional lift from larger diameter tires (up to an extra 1.5"). No additional modifications are required—just bolt it in, realign, and enjoy! Enhance your MINI with aftermarket wheels and larger tires for a more durable, practical, and enjoyable vehicle.

Stage 1 Kit Includes:

• 2" Lift Kit with high-strength assembly hardware (2 front riser blocks, 2 rear riser blocks)
• MAXX-G Heavy Duty Adjustable Front Sway Bar Links
• Hardware kit with high-strength proper length bolts and new locking nuts

Features:

• Engineered using 3D CAD software and finite element simulation for proper fitment and safe performance
• CNC laser-cut parts
• Lightweight fabricated steel design
• Black urethane powder coated for corrosion protection and a quality appearance
• Easy bolt-on installation with all new high-strength hardware and installation instructions

MAXX-G Adjustable Sway Bar:

• Enhances cornering performance, bind-free suspension travel, better suspension alignment, and overall chassis balance
• Sealed and permanently lubricated forged steel ball stud & socket ends for easy installation
• Military grade aluminum adjuster sleeve with opposing RH & LH threads for simple length adjustments
• Replicable link ends for easy maintenance

M7 Speed is the world leader in MINI adventure motoring, overlanding, and ultimate performance products. Known for exceptional customer service and product innovation, the company is dedicated to engineering and producing high-quality, easy-to-install aftermarket performance products. M7 Speed is located in Mooresville, North Carolina, also known as Race City USA.

MINI R56 Front Left Loaded Front Strut provides a convenient and efficient solution for replacing your vehicle’s front strut, spring, and strut mount. This pre-assembled unit eliminates the need for special disassembling tools, as it comes fully assembled, allowing for a quicker and easier installation with standard hand tools.

• Pre-Assembled Convenience: Comes as a complete unit, saving time and effort during installation.
• Easy Installation: Designed for quick replacement with standard hand tools, no special tools required.
• Efficient Replacement: Ideal for restoring proper suspension function and ride quality without the hassle of disassembling individual components.
• Pair Replacement Recommended: For optimal performance and balance, it is advised to replace struts in pairs.
• Warranty: Comes with a 2-year/30,000-mile warranty, ensuring reliability and peace of mind.