BMW Tools & Specialty Equipment for MINI

Urethane Pinch-Weld Block - Set provides a superior solution for supporting vehicles on pinch-weld rails. Traditional rubber blocks can cause damage to delicate body rails due to excessive pressure points. These urethane pinch-weld blocks are engineered with a cross-cut slotted design, allowing versatile positioning either lengthwise or crosswise. They are ideal for safely supporting rocker panels or sheet metal body rails, particularly those that have degraded from corrosion over time.

• Specially formulated urethane rubber for durability
• Deep bilateral slots accommodate virtually all pinch weld frames
• Versatile positioning: lengthwise or crosswise
• Water, chemical resistant, and 100% weatherproof
• Single-piece construction ensures a superior hold
• Dimensions: 3.9” (L) x 2.9” (W) x 2.4” (H)

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK20Q Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

• Very low minimum height of only 3.15 inches
• Wide and robust frame made of high-strength steel
• Precise and safe control whilst lowering
• Manual dead man’s release for optimum safety when lowering
• Built-in safety overload valve
• Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
• Ergonomically designed handle ensuring positive and safe operation
• DK20Q is fitted with quick-lift pedal for easy reach of lifting point

Specifications:

• Capacity:  4400 lbs
• Min. height:  3.15 inches
• Max. height:  19.49 inches
• Frame length:  25.98 inches 
• Handle length:  37.40 inches
• Frame height:  6.30 inches 
• Width:  16.14 inches
• Weight:  68 lbs

When it comes to the torque found on axle nuts you're already looking at using a breaker bar or impact gun not to mention the corrosion collected over the years. The safest approach is using impact socket, since they are built with the strength needed to avoid breaking under pressure.

Features:

• Heavy duty ½ inch-drive sockets and drivers have extra thick alloy steel walls, and take a beating that would destroy normal sockets
•  Durable black oxide coating wipes clean easily and resists rust
• Contains three 12-point sockets for a sure grip on the most common sized axle nuts, plus three hex drives for removing common hex-head plugs and fasteners
• Conveniently packaged in a blow molded case, this set will please the most demanding professional technician or discriminating prosumer

Kit includes:

• 30mm, 32mm, and 36mm - 12-point axle nut sockets - ½" drive

• 14mm, 17mm, and 19mm hex head drive axle shoulder bolt sockets - ½" drive

Commonly used when replacing axle shaft boots.

Features:

• Crimp and flatten design
• Produces a clean factory style crimp
• Limited Lifetime Warranty

MINI Fuel Line Disconnect Tool is an essential tool for removing and replacing the high-pressure fuel pump in MINI vehicles. Designed specifically for servicing N14 and N18 turbo engines from 2007 to 2016, this tool simplifies the process of disconnecting the low-pressure fuel line without causing damage to the quick-connect coupler. Its high-quality, durable design ensures reliable performance and longevity.

• Essential for fuel pump maintenance: Facilitates the removal of the low-pressure fuel line during high-pressure fuel pump service.
• Prevents damage: Avoids potential damage to the quick-connect coupler, ensuring a smooth and safe disconnection.
• Vehicle compatibility: Ideal for N14 and N18 turbo engines in MINIs from 2007 to 2016.
• High-quality construction: Made with durable materials for long-lasting use and reliability.

For efficient and damage-free fuel line disconnection, the MINI Fuel Line Disconnect Tool is a must-have addition to any MINI maintenance toolkit.

The impact driver is a fast and effective way to remove tight or corroded screws and bolts, reducing the chance of rounding off--or rounding out--the fastener head. Insert a slotted or Phillips head screwdriver bit into the driver.

For stubborn bolts, remove the black screwdriver bit adapter head, and replace it with any 3/8 - inch drive socket.

Features:

• Impact driver tool with red rubber grip 
• Four screwdriver bits (2 Phillips; 2 slotted) 
• 3/8 - inch drive bit holder

Doing mechanical work, especially when it come to aluminum heads and engine blocks. The constant change in temperature from hot to cold with and engine may cause fasteners to be more difficult to remove and possibly stripping the threads. This tool wasn't designed to make new thread, but instead clean-up the damaged threads.

Features:

• Repairs both internal and external threads
• Used with standard metric sockets and wrenches
• Tap and Die sizes: 6x1.0 / 8x1.25 / 10x1.25 / 10x1.50 / 12x1.25 / 12x1.75 / 12x1.5 mm
• File thread pitch sizes: 0.75 / 1.00 / 1.25 / 1.50 /  1.75 / 2.00 / 2.50 / 3.00 mm

This rolling creeper seat is the  ideal height for many jobs. If you are working on the lower half of your car, this seat is a must have. Brakes, wheels, waxing, washing and more. 

 Features:

• 2-1/2" thick padded leatherette seat.
• 14" high. x 14" wide x 20" long.
• 1" steel tube frame.
• Divided tool tray below seat.
• Four 2" wheels.
• 2-1/2" ground clearance.
• Ball bearing swivels on all wheels.
• 250 lb capacity.

Make your favorite spot the most comfortable. The hard pavement can be brutal when spending time under your car, so make it more comfortable so there's no rushing when getting the job done.

Features:

Resists oils and fluids High-density foam Folded size is 17"W x 28"L. Unfolded is 17"W x 47"L. Pad is approximately 1-1/2" thick. Headrest is approximately 3" thick. WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See the above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.