BMW & MINI Rear Brake Rotors - Pair 11.02" (280x10)

Restore braking performance and safety with the BMW & MINI Rear Brake Rotors - Pair 11.02" (280x10), essential components for BMW and MINI vehicles.

• Enhanced Braking Performance: Provides smooth and consistent braking action.
• Quality Construction: Made from durable materials for reliability and longevity.
• Direct Replacement: Designed to fit BMW and MINI vehicles precisely.
• Compatible with Various Brake Pads: Ideal for both daily driving and performance applications.

Upgrade your BMW or MINI with confidence using the BMW & MINI Rear Brake Rotors - Pair 11.02" (280x10), ensuring safe and reliable braking performance.

If you're noticing pulsating brakes, grinding noises, or visible rotor wear, it's crucial to replace your worn brake rotors promptly. Alongside rotor replacement, inspecting calipers, pads, and brake lines is recommended for optimal braking efficiency.

Maximize your BMW's performance with this DCS system accessory, specifically designed to regulate the vehicle's speed seamlessly.

Benefits:

• Enhanced vehicle speed regulation
• Optimized performance with DCS system integration
• Customized accessory for BMW models
• Improved handling and control

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
2008-2013 E82/88 BMW 135i, 128 with BMW Performance caliper conversion
2006-2009 E9X BMW Submodels with BMW Performance caliper conversion

1 Gallon Power Extractor makes fluid changing and bleeding tasks straightforward and efficient. Ideal for extracting differential, brake, engine, or transmission fluids, this versatile tool utilizes an integrated hand pump to create a vacuum in the tank, drawing fluid into the unit via the attached tubing. The Power Extractor features a 1-gallon capacity high-density polyurethane tank that is resistant to all chemicals, ensuring durability and reliability.

• Versatile Use: Suitable for extracting a variety of fluids including differential, brake, engine, and transmission fluids.
• Efficient Operation: Integrated hand pump creates a vacuum for easy fluid extraction.
• Durable Construction: High-density polyurethane tank resists chemical damage and is built to last.
• Portable and Convenient: Lightweight and corrosion-proof design makes it easy to use at home or on the go.
• Includes Dipstick Tube: Comes with a dipstick tube for hassle-free oil changes.

The 1 Gallon Power Extractor is an essential tool for both professional mechanics and DIY enthusiasts looking for a reliable and efficient solution for fluid extraction.

BRAKE CALIPER PISTON TOOL SET:

The Schwaben 18-piece disk brake retractor tool kit screws brake caliper pistons back into their bores to make room needed for new brake pads. An essential tool for working on calipers with threaded pistons, the kit comes with both right-hand and left-hand thread screw jacks, press plate, and 15 different diameter press disks to fit a wide variety of vehicles, both import and domestic, including Audi, BMW, Ford, GM, Honda, Mazda, Mitsubishi, Subaru, Toyota, Volkswagen and others.

Made of 100 percent chromalloy steel for strength, durability, and long service life.

PROTECTA SOCKET SET:

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

CALIPER HOOK SET:

• Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.
• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Wilwood DynaPro Four-Piston Brake Kit

Upgrade your Mini's braking system with Wilwood's DynaPro four-piston brake kit. Designed for front and all-wheel-drive sport compacts, this kit ensures secure and accurate installation with radial mounting. Whether you're driving a daily commuter, a competition vehicle, or a custom show car, these kits offer the perfect complement to wheel, tire, and suspension upgrades.

Key Benefits:

• Radial mounting for secure and accurate installation
• Engineered for front and all-wheel-drive sport compacts
• Maintains compatibility with OE master cylinder output and factory ABS functions
• Optional caliper finishes and rotor designs for personalized style
• Fits 15-inch wheels (refer to Wilwood's wheel clearance diagram)
• Requires 220-8491 brake line kit

Ideal for autocross and track cars requiring smaller or lightweight wheels, Wilwood's DynaPro brake kit enhances both style and performance for your Mini.

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

• High dexterity
• Elastic hook and loop strap
• Textured latex finger tips for grip
• Breathable material