Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

Specifications:

• Setting Range: 45-220 ft lbs (60-300 Nm)
• Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
• Size: 22" (550mm) length for easy leverage
• Accuracy: +- 3%
• Include blow molded holding case
• Requires one 3V CR2030 battery (included)

Timing systems tend to be a weak point in the world of German automotives. Chains stretch over time, sometimes even snapping, and guides wear down to dangerous levels. This can end up be disastrous as too much slack in the chain can mean a slipping timing chain which could lead to timing issues or even a destroyed cylinder head and damaged pistons.

To prevent this from happening to your Mini's N12-16 engine, a timing chain service kit is usually the best answer, refreshing your timing chain, guides and tensioners. You could take your vehicle to the shop and spend an obscene amount of money for this, or simply purchase one of our timing service kits and this tool to do it yourself at home for significantly cheaper and without the hassles of trying to work with only basic hand tools.

This high quality tool kit from Schwaben enables you to service your vehicles timing system with ease and accuracy.

Tool Kit Includes:

• Camshaft locking blocks
• Flywheel locking pin
• Timing chain tension block
• Upper chain tension locks

Upgrade your Mini's engine with the Oil Filter Housing W/ Cap for N14 1.6L Engine. This full housing unit is designed for replacing a unit that has experienced leaks, cracks, or internal damage, ensuring optimal engine performance and longevity. It includes an oil filter set for added convenience, though the specific brand is not shown. Easily mountable to the side of the engine, this housing unit offers a hassle-free installation process. For best results, it is recommended to use your preferred filter brand with this aftermarket housing unit.

• Complete oil filter housing unit for N14 1.6L Engine
• Ideal replacement for units with leaks, cracks, or internal damage
• Includes oil filter set for added convenience
• Easy mounting to the side of the engine
• Compatible with various filter brands for customization

The MINI Cooper N18 engine found in many R55-R61 models has two major weak points over time, timing chain and timing guides. The timing guides being the most noticeable and damaging can be very expensive to have a shop repair when trying to get back on the road. If you have some mechanic abilities and can follow instructions you could get this job done for a lot less, but you'll need the right tools for the job.

This Schwaben kit features everything you need in one case to perform either job or both making timing service easy and accurate.

Found in Later 2011+ Gen 2 MINI Cooper S turbo engines and 2013+ Gen 2 MINI Cooper JCW turbo engines.

Tools included:

Camshaft locking blocks
Flywheel locking pins
Timing chain tension block
Upper chain tension locks
When doing a head repair or head gasket replacement you will need this kit to lock the cam.

Also to locate "TPC" Top dead center.

Enhance the performance of your BMW's MINI W10 and W11 engines in R50, R52, and R53 models by tackling the common weak points - timing chain and timing guides. The Schwaben kit offers a complete solution, providing all the essential tools needed for both timing service tasks. With tools like the camshaft holding block, engine support tool and hardware, tensioner assembly tool, and a blown molded case, this kit streamlines the process, ensuring accurate and hassle-free timing service. It's an ideal addition for head repairs or head gasket replacements requiring cam locking.

• Comprehensive kit for addressing timing chain and timing guides issues
• All-in-one case simplifies the timing service process
• Tools included for precise and accurate repairs
• Suitable for head repairs or head gasket replacements necessitating cam locking

When you're diving into the heart of a BMW or MINI B-series engine, the Schwaben Balance Shaft Remover/Installer Tool is your insurance policy against costly timing errors. Designed specifically for the B38 and B48 engines, this kit provides the mechanical precision required to lock the counterbalance shaft in its timing position.

Features & Benefits:

Ensures the balance shafts are timed perfectly to the crankshaft, eliminating common misalignment that can occur during DIY installs Forged from high-grade tool steel with a corrosion-resistant finish, built to withstand the torque and tension of professional shop use Designed to mirror the functionality of factory BMW specialty tools, providing a seamless fit without the dealership price tag

Designed to fix a known weak point for the MINI B3X and B4X engines, the ECS billet aluminium oil filter housing cap is a direct replacement for the factory plastic cap. The OEM plastic part is infamous for cracks, stripped threads, and rounded hex heads—often failing during routine oil changes and turning basic maintenance into a frustrating, time-consuming repair.

The engineers at ECS have designed a precision-machined billet aluminium upgrade that eliminates those issues, delivering strength, durability, and consistent fitment. An integrated drain plug allows you to drain the filter housing cleanly before removal, reducing spills and mess for a faster, cleaner oil service.

Replaces OEM MINI part number 11428575907.

FEATURES

Fixes common OEM plastic failures, including cracking, stripped threads, and rounded hex heads Precision-machined billet aluminum construction for superior strength and longevity Black anodized coating to prevent oxidation Integrated drain plug allows clean, mess-free oil changes Improves serviceability, reliability, and underhood appearance