BMW Seats & Seat Accessories for BMW Z4 M Roadster S54 (2003-2008)

Clear BMW chassis

Please ensure your correct model is selected

Whether you're building a track-only speed machine, show car, or ultra-serious street ride the seats can make an awesome upgrade. Aside from the obvious safety considerations with a seat, there are few upgrades that can have more of an impact in your driving experience. Sport or Race seats envelope and grip the driver's body, holding him/her in place even under extreme driving situations. When strapped into a seat with the appropriate harnesses you can become an integrated part of the car. Without the sliding around of stock seats you can have greater confidance and focus on the act of driving. Turner Motorsport is an authorized Recaro dealer and we use them in all of our racecars and high-level tuner project cars. We offer the full range of Recaro tuner and racing seats with mounts and adapters and other accessories.
Sort By:
Planted Seat Bracket - Driver / Left - Z4
Planted Seat Bracket - Driver / Left - Z4
Planted Technology - Corporate Logo
T#:19924459
Part#: SB126DR
Ships in 8 Business Days
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
High quality steel constructed seat bracket made right here in the USA! ​The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.
Show More Show Less
Planted Seat Bracket - Passenger / Right - Z4
Planted Seat Bracket - Passenger / Right - Z4
Planted Technology - Corporate Logo
T#:19924461
Part#: SB126PA
Ships in 8 Business Days
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 199.00 USD
Free Shipping on orders $49 and up
Add to Wish List
High quality steel constructed seat bracket made right here in the USA! ​The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it's accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted creates each seat bracket using the floor of the vehicle as a reference. Each vehicle is brought into our development center so we can create the best fitting, bolt in, universal seat bracket possible. Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, Momo, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. *Bride sliders are generally made to be vehicle specific so need to have the "feet" removed to make them "universal." Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths. **Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 Inch. The Narrow version requires no modification. Each Planted Seat Bracket goes through three levels of quality control to ensure our high standards are met. All Planted Seat Brackets are hand welded in Bellevue, WA, USA. Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components. Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size then the factory seat. Replacing a factory seat with an aftermarket seat may cause the vehicle's warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use. Professional installation is recommended.
Show More Show Less
Brey Krause R-9221 Seat mount - passenger
Brey Krause R-9221 Seat mount - passenger
Brey-Krause - Corporate Logo
T#:396554
Part#: R-9221
Special Order: No Guaranteed ETA
$ 236.99 USD
Free Shipping
Add to Wish List
$ 236.99 USD
Free Shipping
Add to Wish List

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9221 Features

  • Fits seats between 430mm to 460mm wide at the side mount mounting point
  • Uses factory sliders, power or manual 
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

Show More Show Less
Brey Krause R-9222 Seat mount - Driver
Brey Krause R-9222 Seat mount - Driver
Brey-Krause - Corporate Logo
T#:396555
Part#: R-9222
Special Order: No Guaranteed ETA
$ 236.99 USD
Free Shipping
Add to Wish List
$ 236.99 USD
Free Shipping
Add to Wish List

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9222 Features

  • Fits seats between 365mm to 429mm wide at the side mount mounting point
  • Uses factory sliders, power or manual 
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

Show More Show Less
Brey Krause R-9220 Seat mount - Driver
Brey Krause R-9220 Seat mount - Driver
Brey-Krause - Corporate Logo
T#:396553
Part#: R-9220
Special Order: No Guaranteed ETA
$ 236.99 USD
Free Shipping
Add to Wish List
$ 236.99 USD
Free Shipping
Add to Wish List

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9220 Features

  • Fits seats between 430mm to 460mm wide at the side mount mounting point
  • Uses factory sliders, power or manual 
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

Show More Show Less
Brey Krause R-9223 Seat mount - Passenger
Brey Krause R-9223 Seat mount - Passenger
Brey-Krause - Corporate Logo
T#:396556
Part#: R-9223
Special Order: No Guaranteed ETA
$ 236.99 USD
Free Shipping
Add to Wish List
$ 236.99 USD
Free Shipping
Add to Wish List

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9223 Features

  • Fits seats between 365mm to 429mm wide at the side mount mounting point
  • Uses factory sliders, power or manual 
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

Show More Show Less
Brey Krause R-9247 Seat mount - Passenger
Brey Krause R-9247 Seat mount - Passenger
Brey-Krause - Corporate Logo
T#:402568
Part#: R-9247
Special Order: No Guaranteed ETA
$ 236.99 USD
Free Shipping
Add to Wish List
$ 236.99 USD
Free Shipping
Add to Wish List

The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your reclining back or bottom mount seats to your factory seat sliders. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-924X Features

  • Fits many bottom mount seats from Recaro, Sparco and more
  • Uses factory sliders, power or manual 
  • light weight 
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
Show More Show Less
Brey Krause R-9246 Seat mount - Driver
Brey Krause R-9246 Seat mount - Driver
Brey-Krause - Corporate Logo
T#:402569
Part#: R-9246
Special Order: No Guaranteed ETA
$ 236.99 USD
Free Shipping
Add to Wish List
$ 236.99 USD
Free Shipping
Add to Wish List

The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your reclining back or bottom mount seats to your factory seat sliders. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-924X Features

  • Fits many bottom mount seats from Recaro, Sparco and more
  • Uses factory sliders, power or manual 
  • light weight 
  • 304 Stainless steel
  • Black wrinkle powder coat finish 

    The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your reclining back or bottom mount seats to your factory seat sliders. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

    R-924X Features

  • Fits many bottom mount seats from Recaro, Sparco and more
  • Uses factory sliders, power or manual 
  • light weight 
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

  • Seats & Seat Accessories

Brand

Price

$
$

Shipping