Please ensure your correct model is selected
Flexible silicone smooths the intake tract while allowing for a range of performance intakes fitments. The ultimate in durability!
In most vehicle applications, the rubber intake elbow found in the intake system is not designed for performance or modification. They were designed to get the job done but when you add a performance filter, intake or tune, the stock elbow will start to show it weakness. The stock rubber elbows disrupt air flow as it passes over the accordion sections causing unwanted turbulence and negating the effects of intake modifications.
With high quality 4 ply construction, the Turner intake boot is strong but flexible, ensuring a secure fit on an OEM or aftermarket intake system. A smooth interior ensures unimpeded airflow, while a smooth, unassuming exterior adds to any engine bay.
Benefits:
Improved throttle response,
Increase induction sound
Increased power output - and power output, Best when paired with an ECS drop-in air filter.(ES4461001 or ES4460965)
Detects the throttle valve position and when malfunctioning may throw codes and/or cause the motor to run poorly.
Fits the following BMW engines:
S54 S62
Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.
Used for Pro 5 R filters
BMW S54 Silicone Throttle Body Boot Set - With Clamps is an essential upgrade for any BMW S54 engine, designed to replace aging and deteriorating rubber intake boots. Engineered by Turner Motorsport, these silicone throttle body boots provide superior durability and reliability under both street and race conditions, including boosted applications. Unlike simple silicone reducers, these boots are meticulously designed with the same internal features as the originals, ensuring a perfect factory fitment. The three-ply construction offers enhanced strength and longevity, making them slightly thicker than the factory boots. This set includes six boots and compatible clamps, providing a complete solution at a fraction of the cost of OEM replacements.
When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem.
The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking.
Detects the throttle valve position and when malfunctioning may throw codes and/or cause the motor to run poorly.
Fits the following BMW engines:
S54 S62
Elevate your BMW project with ECS Tuning silicone couplers and elbows, providing a high-quality, precision-engineered solution for various applications. Whether you're installing an intercooler, fabricating a custom intake system, or pursuing other automotive projects, ECS Tuning delivers reliable performance and durability. Trust ECS Tuning to meet your needs and enhance your BMW project.
Enhance the performance of your BMW M62 engine with the BMW M62 Turner IAT Relocation Harness With Mounting Hardware. This high-quality harness allows for the relocation of the intake air temperature (IAT) sensor, providing more accurate temperature readings and improving engine performance. Here are the key benefits:
Upgrade your BMW M62 engine with the BMW M62 Turner IAT Relocation Harness With Mounting Hardware for improved performance and reliability.
Enhance your BMW's engine performance with the Turner Motorsport Idle Speed Control Valve. This genuine BMW component is designed to regulate engine vacuum, preventing stalling and ensuring a smooth idle.
Upgrade your BMW's idle control with the Turner Motorsport Genuine BMW Idle Speed Control Valve to enjoy reliable engine performance.
K&N Aerosol Air Filter Cleaning Kit provides a simple and effective solution to preserve and maintain your K&N air filter, ensuring it delivers optimal performance for a lifetime. This cleaning kit is specifically designed to clean and restore the airflow efficiency of your reusable air filter, saving you money by eliminating the need to purchase replacement filters.
The K&N Aerosol Air Filter Cleaning Kit includes a powerful degreaser that effectively removes dirt, grime, and contaminants from your air filter. Once cleaned, the kit’s specialized oil is used to recoat the filter, ensuring it continues to trap harmful particles while allowing maximum airflow.
Regular maintenance with this kit not only extends the life of your air filter but also enhances your engine’s performance by maintaining high air flow and exceptional filtration. Easy to use, the K&N Aerosol Air Filter Cleaning Kit is an essential tool for keeping your air filter in top condition.
Ensure your vehicle maintains optimal fuel efficiency and performance by swiftly replacing the Mass Airflow Sensor (MAF). This crucial component regulates fuel delivery through injectors based on incoming air volume. A faulty MAF can significantly impact gas mileage and overall performance.
Gradual MAF failure often results in reduced fuel efficiency and performance degradation. Complete failure may cause stuttering and stalling, forcing the vehicle into a limp mode. A simple diagnostic test involves unplugging the MAF connector before starting the car; improved idling indicates a faulty MAF requiring replacement.
Failure to replace the MAF leads to excessive fuel consumption and inefficient burning, adversely affecting fuel economy. Opt for a Genuine BMW MAF replacement to ensure stock-quality performance and enhance vehicle efficiency.
Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.
Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.
Eventuri was founded by true enthusiasts who had a shared passion for cars and performance, engineers that had a background in Aeronautics as well as automotive tuning. After experiencing disappointment time and time again from the claims set forth by the automotive aftermarket, they set out to raise the bar. Their goal? Set a new benchmark for intake design providing true gains, not just "claims."
Designed to use the "venturi effect," Eventuri has created a unique intake system that out-performs the competition. The Venturi effect is when the smooth reduction in cross-sectional area along the length of the housing causes the airflow to increase in velocity. This means more air-flow and smoother delivery, resulting in more power. But that isn't all that sets their design apart. They also use an inverted cone filter that is decoupled from the MAF. This is done because it means the filter no longer dictates the shape of air-flow, thus creating the venturi effect.
Their systems are extensively developed using cutting edge design, testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then validated at the prototype stage through volumetric airflow, intake temperature and extensive dyno testing. They strive to publish all the development information to illustrate the depths they go in bringing an intake from concept to reality. Also assuring to only use the highest quality components for style and durability
Fits the following BMWs
2009+ E89 BMW Z4 sDrive35i
