BMW Intake Parts for BMW Z4 M Roadster S54 (2003-2008)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

AFE - Corporate Logo
T#:1943
Part#: 55-10460
In Stock
$ 21.00 USD
Free Shipping on orders $49 and up

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

Show More Show Less
Eventuri - Corporate Logo
T#:396394
Part#: EVE-FLC
Ships in 2 Business Days
$ 30.00 USD
Free Shipping on orders $49 and up
This filter cleaning kit powers away dirt and contaminants leaving your filter in like-new condition.


Eventuri - Corporate Logo
T#:640792
Part#: EVE-661-G2-FTR
Ships in 2 Business Days
$ 95.00 USD
Free Shipping on orders $49 and up
Replacement filter for the Eventuri E46 M3 Carbon intake system, comes ready to install.
AFE - Corporate Logo
T#:2648
Part#: 31-10144
In Stock at Vendor
$ 103.00

This product was last offered at the strikethrough price on
01-28-2026

$ 97.00 USD
Free Shipping
$ 97.00 USD
Free Shipping
This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E60 5 series : 525i 525xi 528i 528xi 530i 530xi 2004-2010

E85 Z4 : Z4 M Coupe Z4 M Roadster 2004-2008

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
Show More Show Less

AFE - Corporate Logo
T#:1375
Part#: 54-11521
EO#: D-550-38
In Stock at Vendor
$ 502.99

This product was last offered at the strikethrough price on
01-28-2026

$ 451.00 USD
Free Shipping
$ 451.00 USD
Free Shipping
Maximum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heat shield that blocks hot air from entering the filter. Each intake kit has a custom application-specific aFe cone filter that replaces the stock panel filter. The larger aFe Pro 5 R oiled filter, combined with the heat shield, improves airflow by 90%! By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration and throttle response, and producing a more aggressive engine note. Step-by-step instructions for a quick and easy install are included.
aFe reports a gain of 11hp and 10ft/lbs of torque on the Z4 M.

This version uses aFe's highest flowing filter - the Pro 5 R. This filter uses a 5-layer, lightly-oiled cotton gauze material to filter out dirt and particulates, while improving airflow through the intake. For the best flowing filter, with the best performance gain, we always recommend the oiled aFe filter over the dry versions. The Pro 5 R filter is washable and re-oiled using aFe's approved Restore Kit.

This aFe intake kit fits all 2006, 2007, and 2008 MZ4 including:
2006-2008 E85 MZ4 BMW M Roadster
2006-2008 E86 MZ4 BMW M Coupe
Show More Show Less
AFE - Corporate Logo
T#:1013
Part#: 30-10144
Ships in 3 Business Days
$ 103.00

This product was last offered at the strikethrough price on
01-28-2026

$ 91.00 USD
Free Shipping
$ 91.00 USD
Free Shipping
Drop-in aFe high performance air that is made for the stock/factory BMW airbox on all the BMW twin-turbo engines, including the E60 535i & 535xi filter. This is designed to be the last air filter your BMW needs, as it is completely washable/reusable, and flows better than the stock paper air filters. On your BMW's twin turbo 3.0 liter engine, aspiration a BIG factor in producing power -- the better the airflow, the higher the potential power. Replacing your stock paper filter with an AFE high performance cloth/gauze filter takes only minutes and instantly reduces air restriction, for more horsepower and torque.



This item fits the following BMWs:
2004-2010 E60 BMW 525i 525xi 528i 528xi 530i 530xi 2006-2008 Z4 BMW Z4 M Coupe Z4 M Roadster This version used aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

Show More Show Less

Eventuri - Corporate Logo
T#:396395
Part#: EVEZ4MINT
Ships in 5 Business Days
$ 945.00 USD
Free Shipping on orders $49 and up

Eventuri was founded by true enthusiasts who had a shared passion for cars and performance, engineers that had a background in Aeronautics as well as automotive tuning. After experiencing disappointment time and time again from the claims set forth by the automotive aftermarket, they set out to raise the bar. Their goal? Set a new benchmark for intake design providing true gains, not just "claims."

Designed to use the "venturi effect," Eventuri has created a unique intake system that out-performs the competition. The Venturi effect is when the smooth reduction in cross-sectional area along the length of the housing causes the airflow to increase in velocity. This means more air-flow and smoother delivery, resulting in more power. But that isn't all that sets their design apart. They also use an inverted cone filter that is decoupled from the MAF. This is done because it means the filter no longer dictates the shape of air-flow, thus creating the venturi effect. 

Their systems are extensively developed using cutting edge design, testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then validated at the prototype stage through volumetric airflow, intake temperature and extensive dyno testing. They strive to publish all the development information to illustrate the depths they go in bringing an intake from concept to reality. Also assuring to only use the highest quality components for style and durability

Fits the following BMWs
2009+ E89 BMW Z4 sDrive35i 

Installation Instructions

Show More Show Less

AEM Electronics - Corporate Logo
T#:369781
Part#: 30-3000
In Stock
11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
11% off MSRP
$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing
Show More Show Less
AEM Electronics - Corporate Logo
T#:20815166
Part#: 30-3313
In Stock
12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
12% off MSRP
$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.
Show More Show Less
AEM Electronics - Corporate Logo
T#:590418
Part#: 30-3304
In Stock at Vendor
11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping
11% off MSRP
$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

  • Enhances performance and efficiency for BMW and MINI vehicles
  • Maximizes power output while ensuring engine safety
  • Internal MAP sensor for precise control
  • 35PSI maximum pressure capacity for reliability
  • Improves horsepower, torque, and fuel economy
Show More Show Less


AEM Electronics - Corporate Logo
T#:20815164
Part#: 30-3326
In Stock at Vendor
11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD
Free Shipping
11% off MSRP
$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD
Free Shipping
AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector
Show More Show Less