BMW A90 MKV Supra B58 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Dinan Iridium Spark Plug - B48/B46 B58 S58
Call In Or Chat For Best Price!
Dinan - Corporate Logo
T#:40579788
Part#: D640-0001
In Stock
8% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD
Free Shipping
8% off MSRP
$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD
Free Shipping
Dinan Iridium Spark Plugs are an excellent upgrade for tuned and even stock engines. Our spark plugs are made from Iridium - one of the strongest materials available. They last longer than other materials with higher melting points, run cooler, resist preignition, and even require less voltage to produce a strong spark. The iridium electrode with its copper core is harder and stronger than other materials, can dissipate heat more easily, and is better protected from melting, cracking, and other limitations found with standard plugs. Dinan spark plugs are great for high boost, high cylinder pressure, high cylinder temperatures, and high-power situations, and they pair nicely with a set of Dinan ignition coils, where applicable. However, they are not only for tuned and higher output vehicles that may benefit from a plug cooler than the factory heat range – they are also applicable to non-tuned / stock vehicles as well!
Show More Show Less
Rogue Engineering - Corporate Logo
T#:27105150
Part#: RE.061
In Stock
$ 119.00 USD
Free Shipping
$ 119.00 USD
Free Shipping
You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.
Show More Show Less
Dinan - Corporate Logo
T#:8076779
Part#: D760-0062
In Stock
11% off MSRP $ 212.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 188.95 USD
Free Shipping
11% off MSRP
$ 212.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 188.95 USD
Free Shipping
Turbo inlet pipes serve two very distinct, and differing, purposes. On one hand, the optimization of a turbo inlet pipe will encourage better turbo efficiency and responsiveness by allowing the turbo to ingest more air by way of an unobstructed and larger volume flow path. On the other, you have a more visceral benefit that some may argue is equally important than that of efficiency/flow optimization --- increased sound. No matter which of the distinct purposes is favored, Dinan will deliver on both. Regardless of application, a Dinan turbo inlet replaces the weak, and failure-prone, plastic factory inlet with a more robust carbon fiber one. CNC machined fittings are utilized to ensure proper fitment and guarantee installation as a direct replacement to the OEM inlet. Beyond material and fitment however are the improvements to the characteristics of the primary element in the system, the pipe itself. The stock turbo inlet has incorporated additional features (multiple in some cases) that introduce flow restrictions and turbulence while also reducing turbo noises. All of which are unwanted but easily rectified by removing the various resonators and enlarging (and optimizing) the path for a more uniform flow. The result is an inlet that delivers not only more air and allows the turbo to be more efficient (work less) but also provides the oft-desired amplification to the turbo induction soundtrack. Features: Increased turbo efficiency and reliability courtesy of maximum unimpeded and uniform airflow. Eliminates the factory sound resonator for increased turbo vocalization. 14% increase in overall volume over OEM inlet. Average of 7.7% larger internal diameter throughout (maximum cross-sectional area allowed). Carbon fiber construction for increased durability and visual appeal. Direct replacement of OEM turbo inlet. Quick and easy bolt-on installation. Dinan Factory Matching (4yr/50k) Warranty Emissions Note: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:598298
Part#: JB4-SPWCK-F
In Stock
$ 159.00 USD
Free Shipping
$ 159.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.
Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...
For use with older E chassis BMW JB4 systems with the square plastic case.
Burger Motorsports - Corporate Logo
T#:403194
Part#: JB4-BT
In Stock
$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.
Show More Show Less
Dinan - Corporate Logo
T#:23185033
Part#: D010-0017
In Stock
$ 33.99 USD
Free Shipping
$ 33.99 USD
Free Shipping
High-quality stainless steel slimline license plate frame with Dinan logo.

Dinan - Corporate Logo
T#:8246778
Part#: D650-0010KT2
In Stock
$ 404.99

This product was last offered at the strikethrough price on
07-14-2026

$ 374.99 USD
Free Shipping
$ 374.99 USD
Free Shipping
If your BMW's mileage is getting up there, make sure you're keeping your ignition system up to date. Whether you currently have a misfire or you're doing some preventative maintenance, this kit is perfect for your needs. The kit includes: 6 Blue Dinan Coils with locks 6 NGK spark plugs 1 packet of American Grease Stick dielectric grease These Dinan ignition coils feature: Direct plug-and-play. Up to 10% more energy output than stock. Blue housing with Dinan Logo. True upgrade, not just aesthetic.
Show More Show Less
Dinan - Corporate Logo
T#:25805796
Part#: D780-0003
Back Ordered
11% off MSRP $ 506.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 449.99 USD
Free Shipping
11% off MSRP
$ 506.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 449.99 USD
Free Shipping
The OE thermal management system for the B4x/B58 G-chassis BMW and Toyota GR Supra offers an improved formula from prior generations. With a setup where engine coolant is also re-routed through the heat exchanger, the system effectively assists in overall engine cooling as well as charge cooling. However, like its predecessors, it has room for improvement as it can be overwhelmed when the system is taxed aggressively or as power levels are increased. Once overburdened, this results in the undesirable outcome of power being diminished. Avoidance of this unwelcome scenario can be attained though with a Dinan heat exchanger that improves the overall thermal management system so everything runs cooler and more efficiently while being budget-friendly. The Dinan B4x/B58 heat exchanger for the BMW G2x/G4x and Toyota A9x Supra assists in improving overall charge cooling using a more robust core (45mm thick Dinan core vs. 26.75mm thick OEM core) that wields 68% more heat transfer surface area for improved cooling capacity. The significant increase in core thickness and full-size end tanks contribute to the overall thermal mass (ability to absorb, store, and release heat) improvement beyond the OEM setup. With up to a nearly 12º reduction in charge air temps recorded over stock, the Dinan heat exchanger is ready, and able, to assist in extending your vehicle's ability to deliver maximum performance time and time again for your driving enjoyment! Features: Average of 8.7º C reduction in charge air temps with a maximum reduction of nearly 12º C over 30 successive WOT pulls General improvement to the efficiency of the thermal management system, inclusive of engine cooling 45mm thick Dinan core vs. 26.75mm thick stock cooler core 68% more cooling surface area and volume than stock Reduces the tendency to heat soak / go in to limp mode Durable bar and plate design that is less susceptible to damage from road debris Pressure tested, 100% TIG welded, Aluminum construction Direct fit replacement with no modifications required Installation Instructions: https://documents.dinancars.com/d780-0003.pdf NOTE: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:9803960
Part#: BMWJACKPADRED4
Ships in 2 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

  • Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
  • Prevents damage to rocker panels or vehicle undercarriage
  • Made from solid billet aluminum for durability
  • Engraved Burger Motorsports logo for authenticity
  • Honeycomb grip pattern for stability during use
Show More Show Less

OMP - Corporate Logo
T#:393626
Part#: OD/1958
In Stock
$ 269.00

This product was last offered at the strikethrough price on
08-10-2026

$ 244.99 USD
Limited Qty Sale
Free Shipping
$ 269.00

This product was last offered at the strikethrough price on
08-10-2026

$ 244.99 USD
Limited Qty Sale
Free Shipping
Sport-inspired 3-spoke OMP Velocita Suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less
Dinan - Corporate Logo
T#:389437
Part#: D700-0001
In Stock
11% off MSRP $ 263.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 233.99 USD
Free Shipping
11% off MSRP
$ 263.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 233.99 USD
Free Shipping

Stylish aluminum and rubber pedal pads add a great high performance look to the interior of your BMW, while providing plenty of grip for even slippery leather soles. The pedal pads feature the Dinan logo and come complete with hardware for a simple installation. Worth 1 point towards your Dinan badge.

For cars with automatic transmission.

Show More Show Less
Dinan - Corporate Logo
T#:391200
Part#: D440-0047
Ships in 7 Business Days
11% off MSRP $ 321.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 285.99 USD
Free Shipping
11% off MSRP
$ 321.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 285.99 USD
Free Shipping

This boost controller was designed from the beginning to be easily installed and even easier to use. It plugs into a sensor and uses the factory DME to re-map boost, timing, and fuel maps. Changes can be made via Bluetooth, allowing you to use your smartphone to turn boost up for max performance or down for conservative driving. The app contains a live boost monitor that streams data in real time.

  • Up to 40HP/50lb/ft gain
  • Easy installation
  • Adjust boost via free Bluetooth app
  • Live, real-time streaming boost data on your smartphone
  • Worth 1 point toward your Dinan badge

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install this Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a one year warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

Note: Dinan's one year warranty on DINANTRONICS Sport modules covers the product itself, and not damage related to misuse or associated labor costs.

Show More Show Less


OMP - Corporate Logo
T#:393794
Part#: HB/699
Ships in 4 Business Days
$ 69.00 USD
Free Shipping
$ 69.00 USD
Free Shipping
This cushion designed specifically for the WRC and HRC racing seats is a simple addition that adds safety, comfort, and support. It attaches with just two straps to the top of the racing seat and is covered in the same velour fabric as the racing seat itself. A white OMP logo is embroidered in the top half of the cushion to match the design of the seat.
Show More Show Less
OMP - Corporate Logo
T#:393735
Part#: HC/923
Ships on Sep 28, 2026
$ 139.00 USD
Free Shipping
$ 139.00 USD
Free Shipping
Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 36 different positions. Length: 495 mm Thickness: 3 mm
OMP - Corporate Logo
T#:393730
Part#: HC/733E
Ships in 10 Business Days
$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping
Steel brackets for side mounted seats. Low model. 350 mm length x 3 mm thick.

Dinan - Corporate Logo
T#:38688898
Part#: D663-0600-BOX
In Stock
10% off MSRP $ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 85.99 USD
Free Shipping
10% off MSRP
$ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 85.99 USD
Free Shipping
Looking to replace old, or damaged, Dinan clamp-on tips or want to customize your exhaust setup with some Dinan flair? Look no further than our polished or black ceramic coated, straight-cut, double-walled exhaust tips that are available in a variety of tip sizes, lengths and inlet diameters! The enlarged tips with classic styling features an engraved Dinan logo on each tip. A combination that will demand attention to any passerby.
Show More Show Less

Dinan Carbon Fiber Front Lip - A90 Supra
Call In Or Chat For Best Price!
Dinan - Corporate Logo
T#:21078424
Part#: D980-0034
Ships in 3 Business Days
11% off MSRP $ 760.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 675.99 USD
Free Shipping
11% off MSRP
$ 760.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 675.99 USD
Free Shipping
Looking to make the nose of your GR Supra even more sporty and aggressive? Look no further than the Dinan front lip for the platform that takes the existing pronounced body lines from the factory and embellishes them even further for a competition inspired OEM+ look. Unlike more elaborate multi-piece front lips on the market, the Dinan carbon fiber lip is a single piece with a slightly raised center ensuring only minor additional care is needed to navigate inclines or speed bumps. This allows daily drivability to be largely unaffected and the improved look be enjoyed free of worry. Features: 2x2 gloss twill carbon fiber manufactured to be impact resistant, durable and strong Clear coated for maximum UV protection and fade resistance Includes 3M double sided tape and mounting screws for easy installation with a clean fit and finish
Show More Show Less
BMC - Corporate Logo
T#:641644
Part#: FB01054
In Stock at Vendor
$ 102.99 USD
Free Shipping
$ 102.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

OMP - Corporate Logo
T#:393789
Part#: HB/695
Ships in 4 Business Days
$ 85.00 USD
Free Shipping
$ 85.00 USD
Free Shipping
Racing seats can become uncomfortable as the thin padding of the seat begins to compress. If you're planning on sitting in the seat for any extended periods of time, a base cushion is the perfect addition. This OMP seat cushion is 1.5" of firm, but comfortable and supportive, foam that attaches to the velour seat fabric using Velcro strips. The seat cushion is covered in black velour fabric that is flame-retardant and has an OMP logo embroidered in the center. The cushion is 13" long and 11" wide.
Show More Show Less
OMP - Corporate Logo
T#:393666
Part#: OD/2020
Ships in 4 Business Days
$ 379.00 USD
Free Shipping
$ 379.00 USD
Free Shipping
Sport-inspired 3-spoke OMP Velocita Superleggero suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip.
Show More Show Less

OMP - Corporate Logo
T#:391802
Part#: OD/2012
Ships in 4 Business Days
$ 275.00 USD
Free Shipping
$ 275.00 USD
Free Shipping
Classic 3-spoke OMP steering wheel in 330mm diameter and 95mm dish. Anodized aluminum center with OMP horn button and suede on the rim. The steering wheel rim has a round shape instead of exaggerated oval found on other racing wheels. A top-center band gives you a strong reference point for when the wheel is angled or back to center.
Show More Show Less

OMP - Corporate Logo
T#:393744
Part#: OD/1981
Ships in 4 Business Days
$ 159.00 USD
Free Shipping
$ 159.00 USD
Free Shipping

Sporty 3-spoke OMP Racing GP steering wheel in 330mm diameter. Anodized aluminum center with OMP horn button and black leather-like polyurethane rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 330mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Show More Show Less
OMP - Corporate Logo
T#:393734
Part#: HC/922
Ships in 5 Business Days
$ 129.00 USD
Free Shipping
$ 129.00 USD
Free Shipping
Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 16 different positions. Length: 400 mm Thickness: 3 mm
OMP - Corporate Logo
T#:391779
Part#: OD/1956
Ships in 10 Business Days
$ 259.00 USD
Free Shipping
$ 259.00 USD
Free Shipping
Classic inspired 3-spoke OMP Corsica Leather steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less


OMP - Corporate Logo
T#:393737
Part#: HC/925
Ships in 10 Business Days
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 36 different positions. Length: 495 mm Thickness: 6 mm
OMP - Corporate Logo
T#:393727
Part#: HC/665
Ships on Sep 9, 2026
$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping
Sliding rail kit to be mounted between the seat mount and the seat.
OMP - Corporate Logo
T#:1614
Part#: EA-462
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less

Dinan Marque Plate - Black with Offset Logo
Call In Or Chat For Best Price!
Dinan - Corporate Logo
T#:23185034
Part#: D010-0015
In Stock
42% off MSRP $ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD
Free Shipping
42% off MSRP
$ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD
Free Shipping
High-quality stainless marque license plate with offset Dinan logo. This marque plate has an offset logo for use with regular license plate frames to make the Dinan logo look centered in the frame.

Dinan - Corporate Logo
T#:18866021
Part#: D760-0065
Back Ordered
11% off MSRP $ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 584.99 USD
Free Shipping
11% off MSRP
$ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 584.99 USD
Free Shipping
Both the Toyota GR Supra as well as the BMW Z4 are their respective brands' answer to the modern 2-seater sports coupe delivering enhanced driving enjoyment in a compact and stylish frame. With aggressive organic lines used unabashedly throughout, they are unapologetic in their outward style to the point of nearing brashness. This character is limited to driving dynamics and external appearance, however, with both the sound and under-hood visuals not matching the colorful outer demeanor. The factory air box in particular is an uninspired design, albeit functional, and leaves substantial room for improvement in terms of flow and resulting power gains. It also purposefully includes an intake resonator whose sole purpose is the elimination of turbo/intake noises - the same noises that those in the performance world relish. The Dinan carbon fiber intake for the platform rights these wrongs and delivers an intake capable of flowing 58% more air than the stock system resulting in improved throttle response, additional power and the elimination of a potential roadblock when opting to pursue a high-powered build (upgraded turbo, fueling, etc). At the same time revealing a more aggressive, sporty carbon fiber appearance, and an increase in sound courtesy of the removal of the intake resonator and implementation of a semi-open design. To achieve the gains in flow that the Dinan intake delivers, the entire lower box of the system, and not just the lid, has been reworked and enlarged in an effort to make use of as much of the available real estate as possible within the engine bay. In turn, this allows a 40% larger, custom, free-flowing filter to be housed within and maximum flow to be realized. However, a secondary inlet has always been desired by Dinan to effectively fill the volume of the enlarged air box and increase the filter surface area. This desire led to a multitude of experiments being conducted on the effectiveness of a possible open-air inlet in the system. With different shapes, locations, and sizes of openings being tested, the goal was to ensure that the added secondary inlet did not cause any unwarranted side effects such as an increase in air temps in the system. This is commonplace with open-air intake systems where overheated engine bay air is employed in the intake tract. The results of these tests showed that the patterned openings present in the final iteration of the box located on the opposite side from the engine provided a perfect balance of additional volume to assist the factory inlet all the while not causing an increase in turbo inlet temperatures. This was the case regardless of testing conditions (single/multiple gear pulls, constant speed, 0-100mph runs, etc.). With more air being pulled into the system, throttle response is improved, and additional power is realized in the form of max gains of +13 WHP / +14 lb-ft of torque on an otherwise completely stock vehicle. Beyond stock or basic bolt-on equipped vehicles, the Dinan intake would expand the potential of the platform's power ceiling. Put simply, those striving to build a more potent and robust solution, complete with turbo and fueling upgrades, will be allowed to maximize the results without worry of the intake system being a limiting factor. Regardless of the level of the build, the secondary air inlets, as well as the sound slot present on the lid, allow the intake system to be more audible so the turbo spool and BOV can be appreciated. A stark difference from Dinan's traditional fully sealed systems where induction noise is not nearly as recognizable. Not to be outdone by the increased power and sound, the outwardly visible system is made of immaculate 2x2 gloss twill carbon fiber resulting in vastly improved under hood appeal. Joined by the aluminum Dinan strut braces and matching carbon fiber engine cover, the engine bay instantly becomes equally as showy as the exterior. A unified style, inside and out, with a bit of turbo attitude. Features: More Power: Max gains of 13 WHP and 14 lb-ft of torque on a completely stock vehicle Enjoyably louder, sportier sound Improved throttle response Outflows factory intake by 58% or more Larger volume air box (60% larger than stock) 40% increase in filter area (stock: 82 in², Dinan: 115 in²) for optimum flow Lid includes a brace valley to accommodate factory braces or optional Dinan strut braces Quick and easy installation
Show More Show Less
OMP - Corporate Logo
T#:393622
Part#: OD/1951
In Stock
$ 259.00

This product was last offered at the strikethrough price on
05-03-2026

$ 233.99 USD
Limited Qty Sale
Free Shipping
$ 259.00

This product was last offered at the strikethrough price on
05-03-2026

$ 233.99 USD
Limited Qty Sale
Free Shipping
Rally inspired 2-spoke OMP Rally Suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have slight contours for resting your thumbs to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less

Dinan - Corporate Logo
T#:38688901
Part#: D662-9228
In Stock
8% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD
Free Shipping
8% off MSRP
$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD
Free Shipping
Perfect for the do-it-yourself customer looking for a band clamp that allows for a 360º pressure connection, this clamp fits the build. Created from stainless steel, the clamp allows for connecting to 70mm (2.75") via a swedged pipe, and provides even clamping pressure and seal around the entire pipe. This makes for a simple install, or a quick removal should the need arise.
Show More Show Less
Dinan License Plate Frame - Stainless Steel
Call In Or Chat For Best Price!
Dinan - Corporate Logo
T#:27205338
Part#: D010-0012
Ships in 6 Business Days
$ 44.99 USD
Free Shipping
$ 44.99 USD
Free Shipping

Active Autowerke - Corporate Logo
T#:590914
Part#: AASIGNATUREPLAQU
Ships in 3 Business Days
4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
4% off MSRP
$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!
Show More Show Less

Sunex - Corporate Logo
T#:641915
Part#: 8845D
Ships in 7 Business Days
$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
Complete set of spark plug sockets.
Active Autowerke - Corporate Logo
T#:588008
Part#: A90CATDP
Ships in 3 Business Days
$ 1,424.99 USD
Free Shipping
$ 1,424.99 USD
Free Shipping
This downpipe has been proven to increase power by 18hp with a stock tune and upwards of 50hp with an aftermarket tune!
Dinan Carbon Fiber Rear Diffuser - A90 Supra
Call In Or Chat For Best Price!
Dinan - Corporate Logo
T#:21045556
Part#: D980-0037
Ships in 6 Business Days
11% off MSRP $ 899.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 799.99 USD
Free Shipping
11% off MSRP
$ 899.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 799.99 USD
Free Shipping
Dramatic exits come standard with this carbon fiber upgrade. The multi-piece Dinan rear diffuser spotlights the rear of the car and creates a new "floor" that visually appears to make the vehicle lower and more aggressive. Despite the diffuser encompassing the exhaust exits, great care was taken to ensure enough room was supplied to accommodate even large tipped exhausts, like Dinan's own. Additionally, the diffuser adds wrap arounds to each of the rear quarters that allows a harmonious and uniform visual continuation with the Dinan front lip and side skirts for a perfectly matched cosmetic solution. Features: 2x2 gloss twill carbon fiber manufactured to be impact resistant, durable and strong Clear coated for maximum UV protection and fade resistance Includes 3M double sided tape and mounting screws for easy installation with a clean fit and finish
Show More Show Less


Dinan Marque Plate - Black with Centered Logo
Call In Or Chat For Best Price!
Dinan - Corporate Logo
T#:27205366
Part#: D010-0016
Ships in 6 Business Days
$ 40.99 USD
Free Shipping
$ 40.99 USD
Free Shipping
Dinan - Corporate Logo
T#:19395571
Part#: D660-0096-BLK
Ships on Sep 14, 2026
11% off MSRP $ 1,968.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,749.99 USD
Free Shipping
11% off MSRP
$ 1,968.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,749.99 USD
Free Shipping
Evoke passion and excitement with the Dinan Valved exhausts for the GR Supra! Conveying the sweet sounds of a deep, rich, euphonious note that are unmistakably Dinan in addition to retaining the flexibility of valves, Dinan exhausts are the epitome of sound without sacrifice. Utilizing factory cut points and mounting mechanics, the Dinan exhaust system is a straightforward install with precision fitment just like you would expect straight from the manufacturer. Mounting and proper fitment is where the similarities to the factory exhaust end, however. Fabricated from brushed 100% T304 stainless steel, TIG welded and free of hydroformed pipe, the upgraded system is a marked improvement from its predecessor - both in terms of material/construction as well as in overall looks. For weight savings and simplicity, the stock single to dual pipe setup has been abandoned in favor of an enlarged, free flowing single pipe system. This pathway feeds into a muffler that limits frequencies associated with drone, as well as assists in altering the overall tone of the setup to deliver the signature low Dinan rumble. The no-nonsense design allows shocking versatility in sound levels when paired with features, like valves, often associated with more fanciful alternatives. The unabashedly spartan, yet effective, pipe layout forces gasses to escape from the rear out of massive dual, straight cut, 114.3 mm (4.5-inch) exhaust tips emblazoned with the laser engraved Dinan logo. The tip branding further cementing any lingering doubt that the system visible is something above and beyond stock-- if it was not already apparent by the blissful music permeating from them. Unquestionable enhancements to the overall chorus emitted through the Dinan system transcend all modes making the vehicle a delight to drive and enjoy. However, for those that wish to have options to limit the extraordinary soundtrack for late night or early morning arrivals/departures (or any number of other reasons) factory valve control is retained. This effectively makes the system behave similarly to a straight-pipe system that promotes maximum flow and volume when the valve is open and emit more subdued resonant vocals when the valve is closed, and exhaust gases are wholly redirected through the muffler. It is the perfect blend of civility when not pushing the car or the full spectrum of auditory delight when in it. No matter the situation, the Dinan valved cat-back exhaust system is the answer for the discerning enthusiast looking for sound without sacrifice. Features: Maximum gains of +6 HP and +5 ft-lb of torque Enjoyably louder, sportier sound Drone abatement technologies used to reduce cabin resonance Dual 4.5-inch (114.3mm) double-walled, black ceramic coated clamp-on tips with laser engraved Dinan logo Larger diameter piping for increased flow (83mm throughout primary run vs. 80mm at largest point) Factory resonator/collector removed for increased volume 10-pounds lighter than the stock system (Stock: 56-pounds vs. Dinan: 46-pounds) 100% 304 Stainless Steel construction Retains factory valve control Factory-like fitment with included mounting hardware
Show More Show Less
Dinan - Corporate Logo
T#:18866020
Part#: D180-0017
Ships in 6 Business Days
11% off MSRP $ 393.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 349.99 USD
Free Shipping
11% off MSRP
$ 393.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 349.99 USD
Free Shipping
The popular 'G' chassis 2/3/4 series strut braces have been modified to now support the A9x GR Supra! The Dinan A9x Strut Tower Braces provide additional rigidity and sharper handling to the chassis by reducing flex under hard cornering conditions. With more control, spirited driving becomes easier and infinitely more enjoyable. Not only do the braces inspire confidence but they enhance the factory engine compartment with a notable highlight augmenting its aesthetic appeal. The attractive black anodized billet aluminum braces can be installed in a matter of minutes and used in conjunction with either the stock or aftermarket intake systems that retain OEM clearances. Features: Improved chassis rigidity Decreased flex during cornering Solid black anodized billet aluminum for maximum strength and visual appeal Compatible with the stock intake as well as any aftermarket intake system that retains the stock brace clearances Includes matching black mounting hardware for GR Supra applications Bolt-on installation
Show More Show Less

Active Autowerke Full Exhaust System - A90 Supra
Please call in with VIN before purchase
Active Autowerke - Corporate Logo
T#:2542968
Part#: 11-565
Ships in 3 Business Days
$ 2,089.99 USD
Free Shipping
$ 2,089.99 USD
Free Shipping
The A90 Supra exhaust system features a single 3.5 midpipe which improves flow while providing an aggressive tone to the exhaust note. The Brushed Stainless single-exit tips give this exhaust a high cosmetic appeal. This system maintains the factory valve, allowing you to be stealthy for those early mornings and long drives.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:588195
Part#: BMSA90INF
Ships on Sep 2, 2026
$ 229.00 USD
Free Shipping
$ 229.00 USD
Free Shipping
Dinan - Corporate Logo
T#:21045555
Part#: D980-0038
Ships in 6 Business Days
33% off MSRP $ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 438.99 USD
Free Shipping
33% off MSRP
$ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 438.99 USD
Free Shipping
Add a splash of style and a dash of downforce with Dinan's carbon fiber rear deck spoiler for the A9x GR Supra. A quintessential aesthetic modification for any high-performance track or show build, the carbon fiber spoiler emanates sophistication and purpose; two qualities synonymous with the Dinan brand. Features: 2x2 gloss twill carbon fiber manufactured to be impact resistant, durable and strong Clear coated for maximum UV protection and fade resistance Includes 3M double sided tape for easy installation with a clean fit and finish
Show More Show Less

Dinan - Corporate Logo
T#:21045548
Part#: D980-0039
Ships in 5 Business Days
11% off MSRP $ 899.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 799.99 USD
Free Shipping
11% off MSRP
$ 899.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 799.99 USD
Free Shipping
The MK4 Supra was synonymous with a big rear wing. It was the calling card for a generation. However, the newest Supra abandoned that styling cue much to the chagrin of many. With the Dinan High-Rise rear spoiler you can pay homage to the previous generation and bring back the signature styling to the current MKV. Designed to be minimally invasive to sight lines, yet form fitting to existing body lines, the spoiler fits seemlessly within the framework of the factory design and provides an impressive aesthetic highlight to the vehicle. NOTE: The Dinan High Rise rear wing is not a direct bolt-on piece and will require drilling into the body. Please ensure you are comfortable with this requirement or have a shop capable of undertaking the installation before ordering. Features: 2x2 gloss twill carbon fiber manufactured to be impact resistant, durable and strong Clear coated for maximum UV protection and fade resistance Includes 3M double sided tape and mounting screws for easy installation with a clean fit and finish
Show More Show Less
OMP - Corporate Logo
T#:393655
Part#: OD/1987/NN
Ships in 10 Business Days
$ 269.00 USD
Free Shipping
$ 269.00 USD
Free Shipping
Sport inspired 3-spoke OMP Velocita Suede steering wheel in 380mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center.
Show More Show Less

OMP - Corporate Logo
T#:393667
Part#: OD/2023
Ships in 4 Business Days
$ 149.00 USD
Free Shipping
$ 149.00 USD
Free Shipping
Classic inspired 3-spoke OMP Mugello wood steering wheel in 350mm diameter. Gloss aluminum center with OMP wooden horn button. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have 3 holes each that increase in size as they get closer to the center of the steering wheel.
Show More Show Less

OMP - Corporate Logo
T#:391797
Part#: OD/1975
Ships in 10 Business Days
$ 239.00 USD
Free Shipping
$ 239.00 USD
Free Shipping
Classic 3-spoke OMP Trecento steering wheel in 300mm diameter. Anodized aluminum center with OMP horn button and black suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The bottom half of the rim is extra thick for more cushion and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 300mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less
OMP - Corporate Logo
T#:393677
Part#: ODC023
Ships in 4 Business Days
$ 149.00 USD
Free Shipping
$ 149.00 USD
Free Shipping
Ultra-light spacer that has been CNC machined and anodized black. Gives 60mm of clearance for the steering wheel.
OMP - Corporate Logo
T#:391799
Part#: OD-TRECENTO
Ships in 10 Business Days
Starting at $ 239.00 USD
Free Shipping
Starting at $ 239.00 USD
Free Shipping
Classic 3-spoke OMP steering wheel in 300mm diameter. Anodized aluminum center with OMP horn button and available in leather or suede.


OMP - Corporate Logo
T#:391800
Part#: OD/1990
Ships in 6 Business Days
$ 279.00 USD
Free Shipping
$ 279.00 USD
Free Shipping
Universal sport steering wheel with a 330mm diameter.
OMP - Corporate Logo
T#:393788
Part#: HB/693
Ships in 10 Business Days
$ 85.00 USD
Free Shipping
$ 85.00 USD
Free Shipping
If additional leg support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Leg Cushion. Measuring in at 13" by 8.5" by 3.5", it is fastened to the velour fabric of the seat with Velcro strips. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.
Show More Show Less