BMW Engine Parts for BMW A90 MKV Supra B58 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

New TTE580 B58 Turbocharger Upgrade
For vehicles with 6-Port Heads only - Will not fit 2-Port Heads
The Turbo Engineers - Corporate Logo
T#:12577546
Part#: TTE10321
Ships on Oct 26, 2026
$ 4,964.99 USD
Free Shipping
$ 4,964.99 USD
Free Shipping
TTE580 is the very latest hybrid performance upgrade turbocharger based on the Original turbocharger for the BMW B58 inline-six-cylinder turbocharged engine. Superfast spool and response with extra power. We feel this is the best performing 550+hp hybrid. Engineered & Enhanced To construct a TTE580 The Turbo Engineers change the original compressor and employ a far larger and more efficient billet wheel with extended tip technology and mill the compressor cover to the optimum gap to match the new compressor profile. The Turbo Engineers change the Original exhaust turbine for a larger 9-blade high-flow item to lower EGT and raise the power potential but maintain a great boost response profile. Equilibrium Precisely balancing the turbochargers is a key critical factor to becoming a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequently, great care is taken with all TTE turbochargers to achieving balance standards. Firstly, parts are balanced at slow speeds up to 2800RPM in multiple planes using a single parts machine, then components are assembled and the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using an in-house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial-numbered balance test result document. Product Highlights: Original Genuine turbocharger as the base part Original Genuine actuator Original Genuine diverter valve TTE Billet Milled compressor 7+7 Blade with Extended Tip, 55.5mm Inlet TTE High-Flow 9 blade turbine Plug & Play installation 500+ HP on 98ron and proven at 580hp on 102ron Proven TheTurboEngineers quality Single parts finely balanced then components assembled and core high-speed VSR balanced Supplied with a balance test result document Software recalibration is required Made in Germany
Show More Show Less
Supertech - Corporate Logo
T#:641511
Part#: SUP-HPVK-B58
Ships on Oct 26, 2026
$ 2,339.99 USD
Free Shipping
$ 2,339.99 USD
Free Shipping
Upgrade your valvetrain with Supertech components Kit Contains: 12 Nitride Intake Valves 24 Intake Valve Keepers 12 Inconel Exhaust Valves 24 Exhaust Valve Keepers 24 High Performance Valve Springs 24 Titanium Retainers
Show More Show Less
Canton Racing - Corporate Logo
T#:590562
Part#: 24-270X
Ships on Oct 29, 2026
17% off MSRP $ 297.60

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.00 USD
Free Shipping
17% off MSRP
$ 297.60

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.00 USD
Free Shipping

2 Pin Connector
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:33412932
Part#: 61132359999
In Stock
Sale - Save 25% $ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD
Free Shipping on orders $49 and up

Includes connector housing with terminals and seals. Commonly used for the coolant level sensor.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 61132359999 - Commonly used for the coolant level sensor.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Show More Show Less

MMX Performance - Corporate Logo
T#:28968889
Part#: MMR03-1601
Special Order: No Guaranteed ETA
$ 127.99 USD
Free Shipping on orders $49 and up
MMX Performance - Corporate Logo
T#:29035360
Part#: MMR17-0000
Special Order: No Guaranteed ETA
$ 13.99 USD
Free Shipping on orders $49 and up
Genuine MMR Performance O-Ring service kit for the MMX Performance oil filter and billet housing. Does not include MMR oil filter or billet housing, only the four O-Rings needed to service our reusable filter. The MMR Performance oil filter and housing contains four O-Rings within the kit. We recommend you replace the O-Ring set on a regular basis when changing or cleaning the MMR filter, in order to maintain the integrity of the sealing properties it was designed to provide. As it's a direct replacement with the original O-Ring set supplied, it's a very straightforward process to swap and replace. Fitment is limited to the MMR Performance oil filter (MMR17-1502 - See ES4810063) to protect against the notorious B58 oil filter collapse
Show More Show Less

1/2"/12mm Band Hose Clamp - 90-110mm
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:377837
Part#: 003402ECS05A-13
Special Order: No Guaranteed ETA
Sale - Save 25% $ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 6.99

This product was last offered at the strikethrough price on
06-13-2026

$ 5.24 USD
Free Shipping on orders $49 and up

Secure your hoses with the 1/2"/12mm Band Hose Clamp. This high-quality hose clamp ensures a tight and reliable seal for various applications. With its durable construction and easy installation, it's the perfect solution for securing hoses in automotive, industrial, and household settings. Say goodbye to leaks and enjoy peace of mind with this essential hose clamp.

  • Ensures a tight and reliable seal
  • Durable construction for long-lasting use
  • Easy installation for convenience
  • Suitable for automotive, industrial, and household applications
Show More Show Less
Relief Valve For Media Blaster
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:640910
Part#: B1100031RELIEF
Special Order: No Guaranteed ETA
Sale - Save 25% $ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 7.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5.99 USD
Free Shipping on orders $49 and up

CTS Turbo A90 2-port Toyota Supra BOSS Turbo Upgrade Kit
2020 A90 Toyota Supra with 2-port exhaust manifold
CTS - Corporate Logo
T#:44326104
Part#: TR-1059
Special Order: No Guaranteed ETA
$ 2,599.99 USD
Free Shipping
$ 2,599.99 USD
Free Shipping
Supra owners can transform their BMW B58 engine into a true performance powerhouse, combining cutting-edge turbo technology with the quality and dependability that dedicated drivers demand.

Enthusiast Bundles - Corporate Logo
T#:34919067
Part#: 019744TMS01A2KT
In Stock
$ 132.99 USD
Free Shipping on orders $49 and up

MAGNETIC FENDER COVER:

Protect your finish when working under the hood with a high quality Turner fender cover. Made from a synthetic leather layer with a goose flannelette backing for durability and protection. The Turner fender cover holds a tight grip to your fender or core support with four 9.5" magnets sewn into the top layer.


Features:

  • Durable synthetic leather with the Turner logo
  • Soft goose flannelette backing
  • Four 9.5" integrated magnets


Dimensions:

  •  Extra Long 20" x 47"


TELESCOPING LED MIRROR:

You are going to love this tool. This Schwaben telescoping lighted mirror can get you out of a jam when you need to look at something you can not see any other way. Use with or with out the mirror attached. Lighting can reflect on mirror to light at many angles. Great for finding missing parts beneath engine block or oil leaks.

Features:

  • Handy pocket clip
  • Pivoting quick attach mirror for perfect viewing at any angle.
  • Extends up to 26 1/4" for hard to reach places.
  • Collapsed length 6.5" without mirror attached, 9.5" with 
  • High quality mirror provided a perfect reflection.
  • Easy on and off. Turns on when extended and off when collapsed.
  • 44,000 MCD brightness.
  • Long life span up to 100,000 hours on LED bulb.
  • Operates on 3 AG3/LR41 batteries 
  • Includes batteries


TELESCOPING MAGNET:

This Schwaben telescoping magnet is a great addition to any tool box. Magnet is rated to pickup 3.5 lbs. Stainless steel shaft is 7" collapsed and 26" extended. Magnet is encased in a aluminum sleeve to help prevent side of magnet from sticking. Cushion grip rubber handle works great with dry or oily hands.


MAGNETIC PARTS TRAYS:

Stop losing nuts, blots, and screws. The Schwaben magnetic parts tray has a large 4-3/8 inch diameter stainless steel bowl with a rubber-coated magnetic base that won't mar painted surfaces.

Attach the tray to any ferrous metal on the vehicle, and toss in your steel fasteners as you remove them. The magnet holds them safely in place until you are ready to use them again. Works right side up or inverted for under-car repairs.

A simple, effective solution to a common problem.


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
ACL - Corporate Logo
T#:25739334
Part#: 6B1510H-.25
Back Ordered
$ 275.99 USD
Free Shipping on orders $49 and up
Upgrade to ACL's Performance Tri-Metal Bearings for superior engine performance! High-performance Trimetal engine bearings Designed to withstand higher RPM conditions High-strength overlay plate with reduced thickness for improved fatigue properties
Show More Show Less
King - Corporate Logo
T#:26638197
Part#: CR6887SV0.75
Back Ordered
$ 237.99 USD
Free Shipping on orders $49 and up
Introducing King Connecting Rod Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. King Rod Bearings for BMW Engines come in a full set, including 6 upper and 6 lower bearing shells, suitable for 6 Con-Rods. The Upper and Lower bearing shells are comprised of a lead-free, Silver-based tri-metal material designed for extreme load applications. Engineered with meticulous attention to detail, King bearings are designed to exact standards to ensure optimal fitment and compatibility with BMW engines. Experience improved smoother engine operation with King Bearings.
Show More Show Less


5150 Autosport - Corporate Logo
T#:35761662
Part#: 5150-TBK-B58-G2-
Back Ordered
$ 5,149.99 USD
$ 5,149.99 USD
King - Corporate Logo
T#:26638195
Part#: CR6887SV0.25
Back Ordered
$ 237.99 USD
Free Shipping on orders $49 and up
Introducing King Connecting Rod Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. King Rod Bearings for BMW Engines come in a full set, including 6 upper and 6 lower bearing shells, suitable for 6 Con-Rods. The Upper and Lower bearing shells are comprised of a lead-free, Silver-based tri-metal material designed for extreme load applications. Engineered with meticulous attention to detail, King bearings are designed to exact standards to ensure optimal fitment and compatibility with BMW engines. Experience improved smoother engine operation with King Bearings.
Show More Show Less
JE Piston - Corporate Logo
T#:33746539
Part#: 371720
Back Ordered
$ 1,324.99 USD
Free Shipping on orders $49 and up

JE Pistons for BMW/TOYOTA B58B30 - 3.268" Bore, .866" Pin, -12.3CC Dish

Precision-Forged Performance for BMW and Toyota B58 Engines

Unlock the full potential of your BMW B58B30 or Toyota B58 engine with JE’s forged piston set, designed to provide durability, lower compression, and efficiency for turbocharged or high-performance builds. Whether you’re aiming for street performance or track dominance, these pistons offer the strength and reliability needed for modern forced induction engines.

  • Engine Compatibility: Fits both BMW B58B30 and Toyota B58 engines, making it ideal for vehicles like the Toyota Supra (A90) and BMW models such as the G29 Z4 and G20 3-Series.
  • Bore Size: 3.268" (83mm) bore for precise fitment, ensuring optimal sealing and performance in high-horsepower applications.
  • Pin Diameter: 0.866" (22mm) wrist pin for secure and reliable piston-rod engagement, even under extreme stress.
  • Dish Volume: -12.3cc, providing a lower compression ratio for boosted applications, perfect for turbo setups aiming for high power with reduced knock potential.
  • 2618 Forged Aluminum Alloy: Manufactured from high-strength 2618 aluminum, renowned for its durability, heat resistance, and ability to withstand the intense conditions of high-performance engines.
  • Compression Control for Forced Induction: The -12.3cc dish volume is engineered for lower compression, allowing for safe tuning under high boost pressure while maintaining reliability.
  • Thermal Coating: Advanced coatings minimize heat absorption, improving durability under intense engine loads and extending piston life.
  • Lightweight Design: Optimized for reduced mass, these pistons improve throttle response and rev speed without sacrificing strength or endurance.
  • Track-Tested Performance: Designed and tested for both street and competition use, ensuring that you get race-level performance in your everyday build.

Built for Boosted Power and Reliability

Show More Show Less

5150 Autosport - Corporate Logo
T#:25274993
Part#: CP-FPS-B58-82
Back Ordered
Starting at $ 2,256.98 USD
Free Shipping on orders $49 and up
Starting at $ 2,256.98 USD
Free Shipping on orders $49 and up
CP-Carrillo sets the industry standard for high-quality pistons, meticulously crafted for optimal power and durability. Crafted with high-strength, lightweight materials and cutting-edge engineering, this BMW B58 piston set offers: Lightweight Design: Crafted from forged aluminum alloy and other high-strength materials, CP-Carrillo pistons ensure reduced weight for enhanced engine responsiveness and acceleration. Advanced Engineering: Employing state-of-the-art technology and engineering expertise, CP-Carrillo creates pistons that optimize combustion, boost fuel efficiency, and increase overall power output. Wide Configuration Range: Tailoring to diverse engine builds and performance goals, CP-Carrillo provides a range of bore sizes and compression ratios for customization. Quality Construction: Each CP-Carrillo piston undergoes precision machining, rigorous testing, and meticulous development, guaranteeing consistent quality and high performance. CP-Carrillo pistons stand as the superior choice for any B58 engine application, be it a street-driven powerhouse or a track-dominating machine. Engineered by one of motorsport's most esteemed names, these pistons elevate performance and reliability. The piston sets include Pistons, Rings, Pins, Locks, and a Spec Sheet. Optional Extras: Skirt Coating - Adding a Protective Layer Between the Sides of the Piston and Cylinder Walls Dome Coating - Adding a Protective Layer to the Top of The Piston HD-Wrist Pins - A Must if You are Planning on Going Beyond 850 HP! X Forging - Reducing Rotational Mass By Moving the Wristpin Inwards and Shortening it While Increasing Overall Strength
Show More Show Less

Supertech - Corporate Logo
T#:21604312
Part#: KPR-5.0-7S
Back Ordered
$ 3.99 USD
Free Shipping on orders $49 and up
Two required per valve, necessary use with certain supertech valves 5.0mm single groove
CTS - Corporate Logo
T#:35256035
Part#: CTS-ACC-SUPRAKIT
Special Order: No Guaranteed ETA
$ 135.99 USD
Free Shipping
$ 135.99 USD
Free Shipping

CTS Turbo A90/A91 Billet Cap Kit enhances the aesthetic appeal of your Toyota Supra A90/A91 engine bay while maintaining functionality and durability. Designed to replace the standard OEM plastic caps, this billet cap kit is crafted from high-quality 6061-T6 billet aluminum and finished with a sleek black anodized coating for a clean, refined look. With a direct-fit design, installation is straightforward and requires no tools.

  • Transforms the engine bay with a premium appearance
  • Made from durable 6061-T6 billet aluminum for longevity
  • Black anodized finish for a sleek and sophisticated style
  • Direct replacement design ensures easy installation
  • Includes CTS-ACC-010, CTS-ACC-011, CTS-ACC-012, and CTS-ACC-013

Upgrade your Toyota Supra A90/A91 with the CTS Turbo A90/A91 Billet Cap Kit and add a touch of style to your engine bay effortlessly.

Show More Show Less

Forge - Corporate Logo
T#:370919
Part#: VC04B
In Stock
$ 14.99 USD
Free Shipping on orders $49 and up
Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter. 
Dinan Carbon Fiber Engine Beauty Cover - A90 GR Supra B58 3.0L ...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:21078429
Part#: D590-0002
Ships in 5 Business Days
Sale - Save 10% $ 584.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 526.46 USD
Free Shipping
Sale - Save 10%
$ 584.99

This product was last offered at the strikethrough price on
09-29-2026

$ 526.46 USD
Free Shipping
Dress up your engine bay and set it apart from the masses with the Dinan carbon fiber engine cover for the GR Supra. Hand crafted from 2x2 gloss twill carbon fiber with a meticulously laid and consistent weave, the resulting base carbon is top tier on its own. Dinan also incorporates silver accents into the design however that enhance select details from the factory styling that results in an engine cover that adds another level of aesthetic charm to the engine bay. Capable of being a centerpiece on its own or a supplementary element that doesn't shrink into the background when other elements are incorporated, the Dinan carbon fiber engine cover is solid option for any GR Supra engine bay makeover. Features: 2x2 gloss twill carbon fiber with silver accents Direct replacement of factory engine cover Grommets included for quick and easy installation
Show More Show Less


Burger Motorsports - Corporate Logo
T#:46924977
Part#: B58OFBC-90F
Back Ordered
$ 59.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. This kit includes a -10ORB 90º breather to -10AN Fitting to connect to an oil catch can of your choice.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:46924974
Part#: B58OFBC-BO
Back Ordered
$ 82.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports Billet Oil Filler Breather Cap replaces your BMW factory oil filler cap and offers a -10ORB threaded fitting for crankcase ventilation. A removable black block off cap is included to use the cap with no ventilation, but any custom ventilation solution using a -10ORB fitting can be used with this oil filler breather cap.
Show More Show Less
JE Piston - Corporate Logo
T#:33612887
Part#: 389618
Back Ordered
$ 1,722.99 USD
Free Shipping on orders $49 and up
The JE Pistons for the B58 engine are high-performance forged pistons designed for BMW's 3.0L inline-six turbocharged engine. These pistons are built with aerospace-grade materials, offering superior strength and durability under extreme conditions. They feature precision-machined surfaces, optimized for high boost applications, reduced friction, and enhanced thermal management. JE Pistons are known for their lightweight design, which improves engine response, while maintaining reliability for both street and track use. Customizable options for compression ratios and coatings are often available to suit specific performance goals.
Show More Show Less


ATI - Corporate Logo
T#:43142744
Part#: 918351
Back Ordered
$ 418.99 USD
Free Shipping on orders $49 and up
This ATI Super Damper is a direct replacement for the OEM Harmonic Balancer, designed to further reduce harmful engine harmonics that could lead to damage to sensitive engine components. The 21% underdrive function of this super damper is designed to greatly increase usable horsepower for racing applications by driving engine accessories slower, reducing overall parasitic power loss.
Show More Show Less
ATI - Corporate Logo
T#:43142743
Part#: 918352
Back Ordered
$ 451.99 USD
Free Shipping on orders $49 and up
This ATI Super Damper is a direct replacement for the OEM Harmonic Balancer, designed to further reduce harmful engine harmonics that could lead to damage to sensitive engine components. The 10% underdrive function of this super damper is designed to increase usable horsepower by reducing parasitic power loss without greatly affecting engine accessories.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:25772569
Part#: VTT-B58-GCMID-1
Back Ordered
$ 2,659.99 USD
Free Shipping
$ 2,659.99 USD
Free Shipping

ACL - Corporate Logo
T#:34114251
Part#: 7M1512H-STD
Special Order: No Guaranteed ETA
$ 291.99 USD
Free Shipping on orders $49 and up

Introducing the ACL Race Series High-Performance Main Bearing Set, meticulously crafted for BMW B58 and S58 engines. Take your BMW’s engine durability and performance to the next level with these race-proven main bearings, designed to handle the demands of aggressive driving and high-RPM scenarios.

Built with ACL’s Duraglide tri-metal technology, this main bearing set ensures exceptional oil flow and resistance to wear, even in extreme conditions. Engineered for performance, this upgrade is a direct replacement for stock BMW main bearings, providing enhanced strength and longevity without compromising factory tolerances.

Key Features:

Race-proven design: Ideal for performance builds, this complete set delivers superior oiling and heat resistance, making it perfect for high-RPM use. Precision fitment: Engineered specifically for BMW’s B and S series engines, offering a reliable solution for common crankshaft bearing wear issues. Duraglide technology: Featuring tri-metal construction, including a copper-lead base and high-strength overlay, for improved oil retention and reduced friction. High-load capacity: Designed to withstand the rigors of spirited driving and competition, preventing distortion and wear during peak performance. Optimized for high performance: Eliminates tin flash plating, allowing for better bearing-to-housing contact and improved durability under extreme pressure. Whether you're rebuilding your BMW for the track or simply want to ensure reliable performance under demanding conditions, the ACL Race Series Main Bearing Set offers the perfect upgrade solution. Boost your engine’s reliability and extend its lifespan with this high-performance bearing set.

Show More Show Less

Verus Engineering - Corporate Logo
T#:42099845
Part#: A0289A-BLK
Back Ordered
$ 229.99 USD
Free Shipping on orders $49 and up
Verus Engineering Turbo Heat Shield – 6-Port | 2021+ Toyota GR Supra (A90/A91) Engineered for performance and built to endure, the Verus Engineering Turbo Heat Shield is a must-have upgrade for the 6-port 2021+ Toyota GR Supra. Designed to improve thermal efficiency and engine bay airflow, this shield helps reduce heat soak—especially critical when running an aftermarket intake setup. Constructed from 2.0mm thick stainless steel, each piece is laser cut and precision CNC bent for consistent fit and finish. Finished in a high-temperature Cerakote coating, the shield is built to withstand extreme conditions while delivering a clean, motorsport-inspired look. Developed using in-house scan data, the shield ensures OEM-like fitment without compromise. By removing the restrictive factory resonator and OEM turbo heat shield, the Verus unit opens up the engine bay, enhances service access, and significantly improves the visual appeal of your turbo setup. Compatible with the popular Pure800 Turbo Upgrade, this component is ideal for high-performance builds and daily drivers alike. Highlights: 2.0mm stainless steel construction for strength and durability High-temp Cerakote coating for maximum thermal resistance Reduces heat soak and improves intake air temperatures Eliminates factory turbo resonator and bulky heat shield Improves engine bay space and appearance Direct-fit design using in-house scan data for precise fitment Fully compatible with Pure800 Turbo Upgrade Take control of your Supra’s heat management and elevate both form and function under the hood with this high-quality thermal solution from Verus Engineering.
Show More Show Less
JE Piston - Corporate Logo
T#:33612886
Part#: 389617
Back Ordered
$ 1,722.99 USD
Free Shipping on orders $49 and up
The JE Pistons for the B58 engine are high-performance forged pistons designed for BMW's 3.0L inline-six turbocharged engine. These pistons are built with aerospace-grade materials, offering superior strength and durability under extreme conditions. They feature precision-machined surfaces, optimized for high boost applications, reduced friction, and enhanced thermal management. JE Pistons are known for their lightweight design, which improves engine response, while maintaining reliability for both street and track use. Customizable options for compression ratios and coatings are often available to suit specific performance goals.
Show More Show Less