BMW Z3 (1996-2002)

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve 

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
 ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK20Q Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

• Very low minimum height of only 3.15 inches
• Wide and robust frame made of high-strength steel
• Precise and safe control whilst lowering
• Manual dead man’s release for optimum safety when lowering
• Built-in safety overload valve
• Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
• Ergonomically designed handle ensuring positive and safe operation
• DK20Q is fitted with quick-lift pedal for easy reach of lifting point

Specifications:

• Capacity:  4400 lbs
• Min. height:  3.15 inches
• Max. height:  19.49 inches
• Frame length:  25.98 inches 
• Handle length:  37.40 inches
• Frame height:  6.30 inches 
• Width:  16.14 inches
• Weight:  68 lbs

If you have a situation where no amount of positioning or floor jack extensions seem to work to lift your vehicle, you may just finally need that specialty jack. This AC Hydraulic Single-Stage Air Hydraulic Jack for high clearance applications is a top of the line, straight lift design floor jack that is both extremely durable and extremely reliable. Plus, unlike traditional jacks, there is no lifting arm that may come in contact with any part of the the vehicles body or other components that would result in damage. With a lift height of up to 24.06 inches, or up to 33.9 inches with an F250 extension, this air hydraulic jack is perfect for high lift, tight clearance needs.

Features:

• Minimum height of 14.21 in
• Maximum height of 24.06 in, the F250 (optional) extension offers a total extended height of 33.90 in
• Hard chromium plated piston rod for long life
• Built-in safety overload valve
• Hand-operated dead-man’s control for optimum safety whilst lifting and lowering
• Ergonomic handle with push buttons
• With 2 extensions (1.97/3.94 in)

Specifications:

• Capacity:  55000 lb 
• Min. height:  14.21 in 
• Max. height:  24.06 in 
• Frame length:  32.17 in 
• Handle length:  45.67 in 
• Width:  9.06 in 
• Width (with wheels):  12.28 in 
• Air supply:  9 - 12 bar 
• Air consumption:  350 l/min
• Weight:  157lbs

For some of the best bottle jacks in production, stick with AC Hydraulic.  Now backed by our LIFETIME REPLACEMENT program, don't worry about your jack failing you by combining two amazing brands in one deal: ECS's lifetime replacement and AC Hydraulic's premium quality.

Features:

• 5 models with lifting capacities from 26,500 - 66,000 lb
• With extension screw for optimal use of the stroke
• Jack can be used in horizontal position, as long as the pump piston is placed under the jack
• Fitted with practical carrying handle for easy transport

Specifications:

• Capacity: 26,500 lb
• Min height: 9.06 in
• Hydraulic lift: 6.30 in
• Extension screw: 4.33in
• Max height: 19.69 in
• Bevelled base: Yes

For some of the best bottle jacks in production, stick with AC Hydraulic.  Now backed by our LIFETIME REPLACEMENT program, don't worry about your jack failing you by combining two amazing brands in one deal: ECS's lifetime replacement and AC Hydraulic's premium quality.

Features:

• With extension screw for optimal use of the stroke
• Jack can be used in horizontal position, as long as the pump piston is placed under the jack
• Fitted with practical carrying handle for easy transport

Specifications:

• Capacity: 11,000 lb
• Min height: 8.27 in
• Hydraulic lift: 5.91 in
• Extension screw: 3.94 in
• Max height: 18.11 in
• Bevelled base: No