Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
10-08-2026
This product was last offered at the strikethrough price on
10-08-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
If allowed in the rules these solid aluminum engine and transmission mounts offer many advantages over a urethane or Delrin mounts. It's no wonder that these mounts have found their way into the top BMW racers in the country. We originally developed these mounts for E36 and E46 World Challenge racing but they also work perfect in BMW Modified and SCCA club racing and SpecE46 (SE46). These are machined from solid aluminum and have zero deflection. The engine torque will cause a rubber or urethane mount to flex or deflect. The stiffer the material the less movement there is and the more torque is passed through the driveline (instead of being wasted winding up the mount). At the transmission end the flex-free solid mounts will give smoother, crisper shifts since the transmission is no longer dancing on the pliable mount. This puts the shift linkages in better consistent alignment. And unlike rubber or urethane the aluminum has zero wear and is not affected by leaking oil or other fluids so this is likely the last set of motor and transmission mounts you will ever need. We have designed these mounts so the engine is 5mm lower and the transmission is 1mm lower than the factory mounts. This helps lower the center of gravity for better balance and handling. We very strongly recommend using the transmission and engine mounts together as a complete kit. Mixing a rubber mount with a metal mount will cause undue stress on the mouting points and will lead to a failure. We never advise using a solid mount unless a corresponding solid mount is also used. This kit fits the E36, E46, Z3, and Z4 6 cylinder models listed below, including M3 models. 
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
The main reason all of the VANOS units will eventually fail is because the material used for the sealing rings from the factory is not designed for that type of environment. When this happens the only option that BMW leaves you with is buying a new and expensive VANOS unit with the same sealing rings that failed in your original unit.
The VANOS system found in BMW engines is a great feature (when it’s working properly), keeping your power curve smooth and responsive especially in lower to mid RPM range. What usually goes unnoticed is the gradual loss of power within this range as the vehicle's age due to slowly failing seals within the VANOS unit. The way the VANOS system works is based off of oil pressure triggered by a solenoid that allows for a small range of timing degree adjustment, this is where the power curve is affected. When the seals begin to fail (all of them do) there is less pressure to advance the timing reducing the power in that low to mid range. Because this happens slowly it's very hard to notice a difference until you refresh your VANOS unit, then you easily realize the response you've been missing.
There are a number of symptoms that will plague your car as a result of these failing seals such as erratic idle, engine hesitation, stalling, and increased fuel consumption to name a few. If you've been chasing down any of these symptoms with no fix then this could be your issue.
While you're replacing the seals in your VANOS unit it a good time to install anti-rattle spacers to tighten up the gaps in your stock assembly and get rid of that noisy VANOS clatter.
Seals & O-rings:
The seals were the main focus of this project since the OE units are built with Buna-N rubber o-rings instead of the ECS supplied Viton rubber o-rings. The Buna-N material quickly hardens from the heat and chemical exposure within the engine, where the Viton is significantly more resistant to these chemicals. This knowledge was also used when it came to the commonly failed o-rings found on the VANOS seal plate, replaced at the solenoid.
Rattle Repair:
When it comes to the VANOS rattle this is commonly described as "marbles in a can", and can be heard throughout the different RPM ranges depending on the engine. These upgraded rings and washers are precision ground from hardened steel to resist wear and deformation keeping your VANOS rattle free. The rattle repair tools are designed specifically for this VANOS anti-rattle repair, design from hardened steel to stand up to the job. Designed to perfectly follow the splines of the shaft for a tight grip when applying the necessary torque to disassemble & reassemble the VANOS transfer gear. The keyed socket was designed with the intent to use a "common" wrench so this can be completed at home in your garage.
When Servicing your VANOS unit we recommend getting everything you need to replace on the way to service which includes an oil change and valve cover gasket set. Fresh oil and gaskets is the best way to start off a fresh rebuild of any kind giving you the maximum performance of your freshly serviced components.
This item fits the following BMWs:
2000-2001 E46 3 Series M3 M3 Convertible 2000-2006
2001-2002 Z3 Roadster / Coupe Z3 M Roadster Z3 M Coupe w S54 Engine
2006-2008 E86 E86 Z4 Z4 M Roadster Z4 M Coupe
This product was last offered at the strikethrough price on
05-30-2026
Take the guesswork out of S54 ownership. This all-inclusive kit targets the two most notorious failure points on the BMW S54 engine: broken exhaust hub tabs and degraded internal seals.
Turner Motorsport S54 VANOS Exhaust Hub Upgrade
The factory S54 exhaust hub is a ticking time bomb. Excessive play between the drive tabs and the oil pump disk creates a rhythmic rattling that eventually shears the tabs off, risking catastrophic engine failure.
While other kits require deep-engine surgery, our Turner Motorsport Hub Upgrade offers a "work smarter" approach.
Precision Engineering: Developed using 3D scanning and CAD modeling for a perfect, interference-free fit.
Superior Materials: Machined from high-strength 4340 steel and hardened to OEM specifications.
No Re-Timing Required: This bolt-on fix eliminates the failure point without the need to disassemble the VANOS unit or disturb engine timing, saving hours of labor.
ECS Tuning VANOS Seal Kit
The original BMW seals are made of Buna-N rubber, which quickly hardens and loses its sealing properties when exposed to synthetic oil and high heat. Our ECS engineering team has corrected this flaw.
Viton™ Upgrade: We utilize high-performance Viton O-rings for the internal seals, seal plate, and solenoid.
Chemical Resistance: These seals are designed to remain pliable and effective for the life of the engine, restoring lost low-end torque and smoothness.
ECS Tuning Rattle Repair Kit
Eliminate the dreaded "marbles in a can" sound. This kit addresses the axial play in the VANOS helical gears.
Hardened Steel: Our rings and washers are precision-ground to resist the wear and deformation that lead to engine rattle.
Silent Operation: Restores the refined sound and feel of your S54 across the entire RPM range.
The ECS tow hook is a perfect starting point for ECS tow mounted accessories or as a clean looking tow hook. In-house engineering designated this tow hook as the core that started it all when deciding the "must have" features when utilizing the factory tow hook location. The 4140 normalized steel gives their tow hook the strength needed to safely tow your car around and a black melonite coating to keep it aesthetically appealing.
Tow hook
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
Replacement steering rack boot. We recommend inspecting these boots while replacing tie rods or control arms. If these are cracked or damaged you should replace them. Sold individually.
Steering rack boots often crack and split over time revealing internals to potential corrosion or damage. Replace yours to ensure long steering rack and steering component life.
As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
This product was last offered at the strikethrough price on
05-08-2026
Revitalize your vehicle's suspension with Turner Motorsport's Refresh Kits, offering upgraded components for improved performance and extended lifespan. Say goodbye to loose steering, excessive shaking, and unnerving sounds during turns.
One common weak point in the E36 3-series model range is in the mounting and ball joints of the suspension. The front suspension ball joints in particular are prone to wearing out quite quickly thanks to a soft material in the ball joint itself, leaving you in a potentially dangerous situation. At best, worn ball joints and bushings will give you poor steering feedback and clunking noises. However, loose or worn ball joints will have excessive play which will drastically reduce the effectiveness of the steering and suspension. In extreme cases, the ball joint has been known to pop free of the control arm, resulting in total steering loss.
Meyle has addressed this problem with a higher-grade metal in their HD ball joints, similar to those used on the E36 M3. The metal will not wear or fatigue nearly as fast as the standard ball joints. The lifespan is greatly extended. A side benefit of the stiffer joint is better steering response. The metal will not flex or deflect like plastic, rubber, or any other material. The lack of play will mean sharper steering, restoring much of the car's precision and fun-to-drive character. Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards.
We supply the Meyle HD control arms as a set with new M3 rubber control arm bushings. You can choose bushings with either a centered hole (same as stock original) or with an offset hole (adds caster and camber). The stock rubber bushings (manufactured by Boge) will be perfect for most people but if you're looking for an upgrade, the offset bushings will give the car quicker steering response. The solid rubber mounts last longer and give better feedback than the original web design.
All Meyle HD parts come with a 4-year, unlimited mileage warranty.
Features:
4 Year Warranty
All metal ball joints are more reliable and longer lasting than stock
Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements
Package Options:
Bushings without control arm brackets.
Bushings pre-installed into new control arm brackets
Applications:
1992-1999 E36 318i, 318is, 323i, 323is, 325i, 325is, 328i, 328is, including all sedan, coupe, and convertible models.
1995-1999 E36 318ti Compact and hatchback models
1996-2001 Z3 1.9, 2.3, 2.5, 2.8, 3.0
This product was last offered at the strikethrough price on
06-19-2026
Ensure the optimal performance of your BMW by addressing the crucial component of the water pump. Turner Motorsport provides high-quality water pumps designed to keep coolant flowing smoothly. If left unchecked, a failing water pump can lead to overheating issues, potentially causing damage to engine internals. Common among German vehicles, water pump failure may result in unnecessary visits to the repair shop. Preventive maintenance, especially during timing belt replacements, is essential to avoid rapid coolant temperature rise and potential engine damage.
This product was last offered at the strikethrough price on
07-01-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This is an OEM MAHLE fuel filter that removes dirt and other particle contaminants from your fuel.
A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.