Cylinder Head for BMW Z3 (1996-2002)

Clear BMW chassis

Please ensure your correct model is selected

BMW makes their cylinder heads from aluminum. While this is beneficial for many reason, they do not react well to overheating. Especially prevalent on older BMW engines, and over-temp situation has been known to cause the head to warp. Turner Motorsport carries Genuine BMW replacement heads and parts to make your next rebuild a success.

Sub-Categories

Sort By:

Elring Cylinder Head Installation Kit - S52 3.2L
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:367024
Part#: 11129069861
In Stock
$ 214.99 USD
Free Shipping
$ 214.99 USD
Free Shipping

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes everything needed to re-seal your engine's head.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following engines:
S52 3.2L

Show More Show Less
Cylinder Head Bolt Kit
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:582581
Part#: 11121721938
In Stock
$ 29.99

This product was last offered at the strikethrough price on
07-23-2026

$ 21.99 USD
Free Shipping on orders $49 and up
$ 21.99 USD
Free Shipping on orders $49 and up
Schrick - Corporate Logo
T#:359938
Part#: 086311700KT
Ships on Feb 1, 2027
$ 833.52 USD
Free Shipping
$ 833.52 USD
Free Shipping
One major hurdle for a track-only car is the limitation of the hydraulic valve lifters in the M50, S50-US, M52, S52-US, M52TU, and M54 engines. These effectively limit your revs to 7200-7300 RPM as the valves 'float' at higher revs, leading to piston-valve contact. By converting to a machined solid lifter, and upgrading other areas of the engine, you can configure the valve train to withstand high RPM running. Not only can you tune for more power, you can help prevent damage during a mild mechanical over-rev.

This kit includes the mechanical spacers to convert hydraulic lifter tappets to solid lifters. The lifter bucket remains in place with the Schrick solid tappet replacing the original. These work on all M50, M52, S50, S52 and M54 engines and were proven in normally aspirated as well as supercharged engines. A custom camshaft is required.

Professional installation and setup is mandatory as these require complete assembly of the head, checking valve lash, then dis-assembly and machining of the Schrick tappet to spec. This kit includes enough spacers for 24 valves. We also carry individual parts, if you are looking for single pieces. This price is for a full set of 24.
Show More Show Less

OEM INA Hydraulic Lifter - BMW M5X S5X M62 S62
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:360996
Part#: 11321748884
In Stock
$ 19.99 USD
Free Shipping on orders $49 and up
Stock replacement hydraulic valve lifter for the M52, M54 and S50 S52 engines. These lifter buckets can last 150,000+ miles but then they no longer fit on the valve stem correctly and a ticking or knocking noise can result. If the lifter is no longer seated correctly, it can lead to the valve not opening correctly. Replacement is straight-forward but requires special tools for working with the camshafts. This item fits the following BMWs:
1995-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-2003 E39 BMW 525i 528i 530i M5
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1996-2002 E36/7 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 E36/7 BMW M Roadster M Coupe
Show More Show Less

Meistersatz Cylinder Head Bolt Kit - E34, E36, E39, Z3
For vehicles with production date up to 09/1998
Meistersatz - Corporate Logo
T#:1195780
Part#: 11121721938
Ships in 4 Business Days
$ 19.99 USD
Free Shipping on orders $49 and up
$ 19.99 USD
Free Shipping on orders $49 and up
Set of 14 stretch bolts for installing cylinder head