BMW Suspension Parts for BMW Z3 (1996-2002)

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Ball-joint failure in the front sway bar / swaybar link on the E36 M3, M Roadster and M Coupe is something that can't be avoided. But Meyle's HD sway bar links feature a metal ball joint that will hold up longer than the factory replacements and come with a four year warranty.

How do you know if the link has gone bad? From inside the car you will hear a clunking noise when going over bumps. The clunk is a sure sign a ball joint (control arm, tie rod, swaybar link) has failed. Diagnosis with a set of channel-lock pliers will reveal a large amount of play in the ball joint itself.

Features:

• 4 Year Warranty

• All metal ball joints are more reliable and longer lasting than stock

• Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

Applications:
1995-1999 E36 M3 coupe, sedan, convertible
1998-2002 Z3 M Roadster, M Coupe (MZ3)

If you have a clunking sound in the front end, the front swaybar end-link is one of the items to check. The standard plastic ball joint inside the boot will wear or crack, allowing excess motion. This is a Meyle HD part with metal ball joints that will last longer than the standard design. These links are identical to the standard links except for the ball joint and mount the swaybar to the control arm. Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. In addition, these links come with a 4-year, unlimited mileage warranty. Fits non-M models of the BMW E30, E36, and Z3. Sold per pair.

Features:

• 4 Year Warranty

• All metal ball joints are more reliable and longer lasting than stock

• Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

Full Application List:
E30 1984-1991 318i, 318is, 318ic, 325, 325e, 325es, 325i, 325is, 325ic. Not for the AWD 325ix
E36 6/1992-1999 318i, 318is, 318ic, 323is, 323ic, 325i, 325is, 325ic, 328i, 328is, 328ic
Z3 1996-2002 1.9, 2.3, 2.5, 2.8, 3.0

Ball joints tend wear out over the years, creating vibrations and suspension and steering slack. This Meyle HD ball joint is perfect to restore your suspension's feel and provide longer lasting service than stock with a 4 year, unlimited mile warranty.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Features:

• 4 Year Warranty

• All metal ball joints are more reliable and longer lasting than stock

• Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

Fits the following BMWs:
1992-1999 E36 BMW Non-M
1995-2002 Z3 BMW Non-M

Ball-joint failure in the front sway bar / swaybar link on the E36 M3, M Roadster and M Coupe is something that can't be avoided. If you are looking for a direct replacement Lemforder is an OEM supplier to BMW. How do you know if the link has gone bad? From inside the car you will hear a clunking noise when going over bumps. The clunk is a sure sign a ball joint (control arm, tie rod, swaybar link) has failed. Diagnosis with a set of channel-lock pliers will reveal a large amount of play in the ball joint itself.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1995-1998 E36 BMW M3
1996-2002 Z3 BMW M Roadster M Coupe

For BMW E30, Z3, E21, and 2002 models, upgrading to adjustable rear trailing arm bushings from manufacturers like Powerflex offers both improved performance and the ability to fine-tune suspension alignment. These bushings are designed to replace the factory rubber bushings, which can degrade over time and lead to imprecise handling.

Key Features and Benefits:

• Adjustable Alignment: These adjustable rear trailing arm bushings allow you to modify rear toe and camber settings. This is crucial for fine-tuning the suspension for different driving styles, especially if the car is used in motorsport applications like track days or autocross, or if the car has been lowered and needs suspension corrections.
• Superior Handling: By significantly reducing the play in the rear trailing arms, these bushings improve the car’s handling dynamics. They keep the rear suspension more rigid during acceleration, braking, and cornering, resulting in sharper, more predictable handling.
• Polyurethane Durability: Unlike the OEM rubber bushings, which wear out over time due to heat, road grime, and chemicals, these adjustable bushings are made of durable polyurethane. This material resists aging, cracking, and wear, ensuring consistent performance over a longer period.
• Reduced Deflection: Adjustable polyurethane bushings limit suspension deflection, allowing the vehicle to maintain optimal suspension geometry under load. This improves cornering performance and reduces body roll.
• Longer Service Life: Polyurethane bushings are known for their longevity compared to rubber bushings, offering a "fit and forget" solution for car owners who want reduced maintenance and better overall reliability.

Installation and Adjustment:

• Direct Fit Replacement: These bushings are designed as a direct replacement for the stock rubber bushings, offering the same fitment while adding adjustability. No major modifications are typically required, making installation easier for those familiar with suspension work.
• Alignment Precision: Once installed, these bushings allow precise adjustments to the suspension alignment, which is ideal for correcting issues that arise from modifications like lowering the vehicle or installing performance suspension components.

Ideal for:

• BMW E30 (3 Series)
• BMW Z3
• BMW E21 (3 Series)
• BMW 2002

These adjustable rear trailing arm bushings are perfect for enthusiasts looking for more control over their vehicle’s alignment and handling, whether for street driving or performance applications. They offer a great balance of increased performance, durability, and adjustability without sacrificing daily driving comfort.

Discover the Turner Motorsport URO Rear Shock Mount Reinforcement Plate, individually priced for E30, E36, E46, and Z3 BMW models. This mounting plate provides essential support at the rear shock mounting point, enhancing stability and durability. Engineered by URO, renowned for quality auto parts, this reinforcement plate is designed to address and prevent issues related to the rear shock mounting, ensuring a reliable and secure connection for a variety of BMW models.

• Individually priced for cost-effective customization.
• Enhances support at the rear shock mounting point.
• Designed for E30, E36, E46, and Z3 BMW models.
• URO quality ensures durability and reliability.
• Addresses and prevents issues related to rear shock mounting.

Upgrade your BMW's rear shock mounting system with the Turner Motorsport URO Rear Shock Mount Reinforcement Plate for increased stability and longevity.

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality Meyle HD replacement to ensure a tight, noise-free ride.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMWs:
1992-1999 E36 BMW
1999-2006 E46 BMW
1995-2002 Z3 BMW