These are the factory BMW wheels that were optional on the E85 Z4 3.0i Roadster. Their sizing and offset makes them a direct fit to the E46 and other models. What makes these wheels stand out is their curved concave dish that makes them look larger than their 18" diameter. This is a staggered set in the factory sizes and offsets - 18x8.0" and 18x8.5". These are a direct fit upgrade for all E46 models and will also look great on other chassis as well (see fitment notes).

Z4 Ellipsoid Wheel Set includes -
2 x 18x8.0" ET47 Ellipsoid Style 107 front wheels (BMW #36116758192)
2 x 18x8.5" ET47 Ellipsoid Style 107 rear wheels (BMW #36116758193)
4 x BMW wheel center caps (BMW #36136783536)

These are relatively high offset wheels so wheel spacers will be required on other models. Enter your car info for more specific info. Careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing wheels. Adding different or larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, fender modifications, or other adjustments may be required. Retrofitting wheels from one chassis to another may not be compatible with your TPMS system (new TPMS or a TPMS emulator may be requried). For additional resources on wheel fitments, refer to our Wheel Guide FAQ or give us a call or e-mail.  

Used on a wide variety of both BMW and MINI wheels. Best to replace whenever new tires are being installed.

Genuine BMW Rubber Valve - L=42,5Mm
This item fits the following BMW Chassis:
E30 M3,E36 M3,E34 M5,E60 M5,E63 M6,E46 M3,E70 X5M,E71 X6M,E82 1M Coupe,E85 Z4M,E53 48IS,E30,E34,E36,E38,E39,E46,E53 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3i12
 

The Style 162 'Ellipsoid' wheels were originally used on the E90 330i with the factory Sport package. The broad spokes make the wheel look bigger than it actually is. This is a staggered wheel set - 18x8.0 ET34 in the front and 18x8.5 ET37 in the rear. This is an easy staggered fitment for 3-series cars. On older models such as the E36 and E46 that used higher factory offsets the tire clearnce to the outer fender may be tight. This is an easy fit to E9X cars though.

Style 162 Wheel Set includes:

• 2 x 18x8.0" ET34 Style 162 Ellipsoid Styling Wheels (BMW #36116775601)
• 2 x 18x8.5" ET37 Style 162 Ellipsoid Styling Wheels (BMW #36116775602)
• set of 4 wheel center caps (BMW #36136783536)

As with any wheel retrofit, particular attention must be paid to tire sizes, ride height, and alignment settings. We cannot guarantee wheel fitment for every application. Careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing wheels. Adding different or larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, fender modifications, or other adjustments may be required. Retrofitting wheels from one chassis to another may not be compatible with your TPMS system (new TPMS or a TPMS emulator may be requried). For additional resources on wheel fitments, refer to our Wheel Guide FAQ or give us a call or e-mail. 

These dynamic 5-spoke wheels have a turbine fan effect and are very similar to wheels used on the i8 supercar. They are directional - 2 for the left and 2 for the right side. The spoke face is a bright mirror polish while the rest of the spoke is painted black, giving the effect of 5 spinning blades. This is a square wheel set of 18x8.0" ET34 wheels for the front and rear. Originally designed for the F30 3-series, the width and offset will work on a lot of other BMW models.

BMW Style 419 wheel set includes -

• 2 left side 18x8.0" ET34 BMW Style 419 Streamline alloy wheel (BMW #36116850376)
• 2 right side 18x8.0" ET34 BMW Style 419 Streamline alloy wheel (BMW #36316850941)
• 4 x BMW wheel center caps (BMW #36136783536)

Careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing wheels. Adding different or larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, fender modifications, or other adjustments may be required. Retrofitting wheels from one chassis to another may not be compatible with your TPMS system (new TPMS or a TPMS emulator may be requried). For additional resources on wheel fitments, refer to our Wheel Guide FAQ or give us a call or e-mail.